Here I show the new launch Oscilloscope and I run through its functions as a unboxing / Tutorial. I will have more videos coming out in the future show me enhance capabilities
Пікірлер: 61
@mecatronicazuniga69034 ай бұрын
GOOD WORK 👌👌👍👍
@micku99542 жыл бұрын
look nice scope , love ur BMW waveform Simulator.
@weldingjunkie2 жыл бұрын
Thank you my friend the boards are about $110 through snap on.
@dennothemenno89002 жыл бұрын
Display reminds me of the Micsig Tablet scope.
@weldingjunkie2 жыл бұрын
Yeah pretty much is
@Jpilgrim302 жыл бұрын
The secondary ignition leads from aeswave have a much cleaner output than any other I’ve used as well.
@weldingjunkie2 жыл бұрын
Same here, the colored ones right ?
@romanosautomotive2 жыл бұрын
Nice Jay, I might have to pick one up to add to the collection :)
@weldingjunkie2 жыл бұрын
Def an awesome scope very viable
@vaniodackov1254 Жыл бұрын
Unfortunately, the Tab 3 doesn't have software to play WAV files, so you can't view the saved oscilloscope image. Please use the pre-installed Screenrecorder app to save. This creates a video file on the screen that you can then view in your gallery.
@8power02 жыл бұрын
I WAS SO READY TO BUY IT UNTIL,,, I HEARD IT WON'T WORK WITH A PC. I HAVE A LAUNCH X431 PAD V PRO CAN YOU TELL ME WILL IT WORK WITH THAT SCANNER ... THANKS REALLY ENJOY YOUR CHANNEL YOU'VE GOT TO LOVE YOUR CONTENT !!!!!!!!!!!!!
@weldingjunkie2 жыл бұрын
That’s one thing I really limes about using a scope on the computer. The new ultra scope and now this works only on tablet it’s a bummer. I use it on my Thinkcar S20 it’s hot hdmi out and 13.3 screen so it helps but rather have a pc. I believe it works on the v pro but I’m not 100%
@8power02 жыл бұрын
@@weldingjunkie THANKS FOR THE REPLY , ALWAYS GREAT WATCHING YOUR CHANNEL .
@rem87682 жыл бұрын
This is a HANTEK oscilloscope packed in a LAUNCH case at a price three times more expensive than HANTEK.
@weldingjunkie2 жыл бұрын
I believe it’s misig software vs hantek from what I’ve seen
@CJ.A-C2 жыл бұрын
which model hantex please from london
@ousmanesarr72872 жыл бұрын
@@weldingjunkie yes its a migsig scope
@bobbaxter9522 жыл бұрын
I had a micsig ato1104,this one in the video is better,more on screen and slightly easier design of the menus.
@weldingjunkie2 жыл бұрын
@@bobbaxter952 yeah with the bigger screens it’s better more options the bigger screen on my thinkcar s20 same scope has auto set up.
@theautomotivedoctormr.wils92172 жыл бұрын
Not bad scope , longer power cable be appreciated . But good scope , help section not bad either .
@weldingjunkie2 жыл бұрын
Right? I thought they did a good job on it. Very very usable .. I added a longer printer cable to mine works better. Are you using yours a lot?
@theautomotivedoctormr.wils92172 жыл бұрын
@@weldingjunkie not as much as the ats , but very capable scope . Help section decent , was surprised belive they've done a good job on it .
@theautomotivedoctormr.wils92172 жыл бұрын
@@weldingjunkie a box or touch zoom needs added , would be great addition to the software . But find its easy to adjust to and very good for price .
@weldingjunkie2 жыл бұрын
@@theautomotivedoctormr.wils9217 same here nothing beats the ATS I’m so used to it but you’re right it’s really capable for those that don’t want to drop the cash on ATS or Pico it’s an awesome option. I was honestly shocked by how good the help section and the automotive auto set ups were. I’m happy they went with at least 1GS too
@Hibachipower Жыл бұрын
where can i buy this? amazing dont have this now....?
@meganandchad137 ай бұрын
Can anyone tell me if this works with the xtool d7 scan tool?
@CJ.A-C Жыл бұрын
have you done anything else on launch pad 7 tutorials have you used the scope on a job or is this the only time you have used it .its a year on and theres not much out there on pad 7..VERY POOR BY LAUNCH do you have a numer to talk on ??
@CJ.A-C2 жыл бұрын
hi do snap on do other simulators for different models as well as bmw
@darrollfryer6282 жыл бұрын
I am very interested in this scope can you tell me we're you got this scope?
@weldingjunkie2 жыл бұрын
Hi Darroll I sell them. My email is jasonbquinlansr@gmail.com if you are interested or visit us at automotive scan tool group on FB.
@MrNebRebew2 жыл бұрын
What’s the price? I’m not on Facebook
@weldingjunkie2 жыл бұрын
@@MrNebRebew my email is in the comments if interested. $995
@ADDAUTOMOBILESERVICES2 жыл бұрын
👍
@kylewilhelm93972 жыл бұрын
Will this work on matco maxflex scanner since its basically a launch scan tool?
@weldingjunkie2 жыл бұрын
It should yes, Thinkcar matco launch I believe can use the same scope I know Thinkcar and launch can I’ve done it
@JavierRamirez-wy9kg2 жыл бұрын
What about launch pros3+
@vins09162 жыл бұрын
Hi there can I use this launch scope also on the thinktool pros scanner
@weldingjunkie2 жыл бұрын
As of now it does yes but I can’t guarantee it to stay that way
@mikeparra14782 жыл бұрын
@@weldingjunkie great content!! I have a s10 platinum, wondering if i can still get away with using the launch scope i dont know what you think?? The thinkcar scope box is almost double the price than the launch scope here in mexico.
@weldingjunkie2 жыл бұрын
@@mikeparra1478 thanks man I appreciate it yes you can use topdon launch & Thinkcar I use my launch on my s10 all the time
@mikeparra14782 жыл бұрын
@@weldingjunkie thank you so much man, really helped me there!! Wish you the best bro, and may you always have badass scanners lol
@ivansperanza2 жыл бұрын
Pretty similar to Hantek scope
@weldingjunkie2 жыл бұрын
Pretty close yes much better specs tho and higher sample rate
@CJ.A-C2 жыл бұрын
@@weldingjunkie ANY IDEA whick model
@weldingjunkie2 жыл бұрын
@@CJ.A-C it’s not a hantek you can only use launch scope on a launch or thinkcar
@porscheaaron12 жыл бұрын
Will this work on the TopDon plus?
@weldingjunkie2 жыл бұрын
I’m trying to find out for you it’s supposed to
@weldingjunkie2 жыл бұрын
I found out it will not unfortunately Aaron.
@johnhill36442 жыл бұрын
price and dealer in Canada
@weldingjunkie2 жыл бұрын
Hi John I can get you price and ship to cananda
@YourAverageFNAF_Edits Жыл бұрын
Do you know when Launch it's gonna come out with 12 beats resolution scope
@weldingjunkie Жыл бұрын
Probably not for a while it’s made by Owon currently
@CJ.A-C2 жыл бұрын
ANY BODY GOT IDEA OF PRICE FOR UK
@weldingjunkie2 жыл бұрын
Check eBay in UK usually sellers on there. It’s around $800-950 depending on vendor here
@CJ.A-C2 жыл бұрын
@@weldingjunkie Thanks a lot.somebody said the unit they use by launch is made by Hanteck and am trying to identfi ths hanteck model number ???
@weldingjunkie2 жыл бұрын
@@CJ.A-C def not hantek it’s misig software however the scope shown here is a 1GS scope is an excellent sample rate
@AFatherToTheFatherless Жыл бұрын
Will this work on launch x431 pro3s+?
@victorhoyt43529 ай бұрын
Yes
@AFatherToTheFatherless9 ай бұрын
@@victorhoyt4352no it won't. Model number O2-2 will