Matco Tools Maximus 4 0 Scope Basics

Рет қаралды 7,218

Жыл бұрын

In the Video I show the basics of the Maximus 4.0 scope
Check out part 2! • Thinktool TopDon Maxi...
If you want more diagnostic training go to handsonautotraining.com
Equipment that I use:
TopDon Battery Maintainer amzn.to/40mubUw
Cardaq Plus 3 amzn.to/3Z9F3V1
Astro Meter amzn.to/402cIkJ
Break out box OTC amzn.to/41f0x3Z
Break out box Go Daig amzn.to/3nWCqsK
Quality Test Leads www.aeswave.com/Automotive-Te...
amzn.to/3LH5Vsc Pico 2205
Camera equipment that I use in the field
amzn.to/40jzpR2 - Sony ZV-1 Camera
amzn.to/40hchCA - Tascam Audio Recorder
Studio Camera amzn.to/3Jz7A0p

Пікірлер: 35

@baja-automotive Жыл бұрын

Keep pushing Matco Scope training classes. The more people jump ship from the Zues the sooner Snap-On will figure out they need to increase the capture rate of their scope. I'm very impressed with the scope and hope ThinkCar keeps up the support. We need more competitors on the market

@BrianMann216 Жыл бұрын

Yes besides no frequency math channel pretty solid scope. Snappy lagging behind the times for sure.

@Mr2004MCSS 11 ай бұрын

Great video Brian. I have the Thinktool version of this scope and have only played around with it a little. This video really gives some direction on what the different functions do and what the buttons do.

@benjaminbrower540 10 ай бұрын

Your the man Brian.. Thanks for all you are doing with your channel

@BrianMann216 10 ай бұрын

I appreciate that

@djosbun Жыл бұрын

Thanks for the detailed review, Brian. Have a great Easter!

@BrianMann216 Жыл бұрын

I really did not understand how the scope worked the other night for the meeting. Now that I played with it I actually like it. It is very powerful as far as sampling and buffer compared to the snappy product. I may make a part 2 and cover what people are saying in the comments of this video.

@arthurfricchione8119 Жыл бұрын

great informative video. guess I should of watched part 1 before commenting on part 2. Oh well thats the way it goes. Have a great weekend 😊

@robertmobileman8304 Жыл бұрын

great video , same scope as thinktool and topdon.. thanks

@BrianMann216 Жыл бұрын

I wasn't sure about which one it actually was!

@15066bas Жыл бұрын

When using the 360/720 deg cursers turn on math. It should bring up an additional curser in deg.

@BrianMann216 Жыл бұрын

I will try that!!

@MechanicMindset Жыл бұрын

I noticed this with the ThinkTool version of this scope. I am gonna try too 👍

@BrianMann216 Жыл бұрын

@@MechanicMindset I did not have any luck, will post a video later. I was not able to get the time rulers to measure in degrees. I may be missing something.

@MechanicMindset Жыл бұрын

@@BrianMann216 Ah ok, he mentioned something about a math channel which is odd. I do think it’s strange there not being a feature for degree measurement; but this was my conclusion

@15066bas Жыл бұрын

@@MechanicMindset My Miscig interface looks the same. The math channel wants to pick two channels automatically and I have to deselect the one, I tap on the red symbol and then the cursers read in deg. Also you don't have to bring up the floating box to select the channel, just tap on the colored arrow or touch the wave form and it should switch the cursors to be used on that one.

@sergiorobleroberduo4584 Жыл бұрын

I’m having a hard time connecting the lab scope, is there and manuals or quick set up guides you know about?

@DependableAutoTruck Жыл бұрын

i have often wondered why other scope manufacturers don't build their scopes like Snapon and ATS where you don't need attenuators? it would make life easier for new ones

@BrianMann216 7 ай бұрын

I used multiple setups to make this happen, what particular part? Where are you located?

@katzenpapa 7 ай бұрын

To the author of this video: can you send me the schematics of your breadboard?

@advancedleveldiagnostics Жыл бұрын

Thanks! do you know if this is the same on the Launch Throttle III?

@BrianMann216 Жыл бұрын

I am not 100% sure but I hear it's a launch

@nickayivor8432 Жыл бұрын

QUICK-WITTED Hand On Auto Training Brian Mann Happy Easter 🐣 enjoy with all your family around you Hands On Auto Training Brian Mann Tutorial loved it from the start to finish 👍 From Nick Ayivor from London England UK 🇬🇧 ⏰️ 10:09am

@BrianMann216 Жыл бұрын

HAPPY Easter

@me5ponk454 Жыл бұрын

What's a good (easy) way to induce a bad CAN signal on an actual car? I've been messing with the one we have at work and demonstrating it to the other techs

@BrianMann216 Жыл бұрын

I have introduced faults onto live vehicles, but I really don't like to. Just use a low Ohm resistor to ground or positive, AT Your own risk of course, CAN seems to be very forgiving. Just don't want to mess up a car

@Jpilgrim30 Жыл бұрын

Looks like a micsig scope

@chrisi1909 Жыл бұрын

+1 for MigSig Screen Setup - just small differences like start/stop location and such

@chenjon4907 Жыл бұрын

+1 Micsig scope function🤔

@BrianMann216 Жыл бұрын

I have been looking around a bit and found the the micsig scope that has a very similar screen. Does Miscig supply them for topdon and thinktool?

@MechanicMindset Жыл бұрын

Hey Brian! It’s a MicSig scope 😁 Someone pointed this out to me when I did the ThinkTool scope video (so same as TopDon too). Is the Matco diag tool also Launch based then? Cheers

@BrianMann216 Жыл бұрын

Thanks I am about to make up a part 2 follow for all the info that people are showing me in the comments.

@MechanicMindset Жыл бұрын

@@BrianMann216 Some good info. The degree ruler is a good one!