Leaking Hydraulic Cylinder - Rebuild
Рет қаралды 42,859
2 жыл бұрынHow to fix a severely leaking hydraulic cylinder. Shown is the bucket ram on a 60 John Deere loader, mounted on a John Deere 670 compact tractor.
Seal kit - AM118390
Fowler Dial Indicator with flexible base -
www.fowlerprecision.com/Produ...
@bioniclife 2 жыл бұрын
I am no expert, quite the opposite. My hydraulic shop suggested heating up a cup of water, placing the seals in the water for 10-15 mins prior to install. Worked well on my very first hydrulic cylinder repair.
@Watchyn_Yarwood 2 жыл бұрын
Tip for installing the O-ring on the end of the rod. Wrap thin packing tape around the threads to keep the O-ring from getting damaged when you install it.
@kellyroup4262
Great vid! When removing the sweeper and metal deal you just go under it with a screwdriver blade under it and twist. I've done a lot of them and it's the easiest way and doesn't damage the gland
@Nils_1984
Nice work! Will try my first package next week
@modifyman6977
Okay,
@laredotech Жыл бұрын
Where did you get the torque specs for the nut? I have a 4300 with a 430 loader. I need to replace the seals, but I cant find the torque specs
@fahadhamda8302 2 жыл бұрын
What is that clamping tool you used to hold the dial Guage?
@danaalexander9714 2 жыл бұрын
I've got a 755, any chance I could get the tire sizes?
@rustylozanolpc4227 Жыл бұрын
If a rod has a black scratch down the length of the rod.. dies it need to be replaced ?
@daveG31
When reinstalling the cylinder do you need to bleed the air out?
@garybrady9531 2 жыл бұрын
use a 3/8" chrome extension to roll the seal into place
@zachthornton7930
What’s the part number for the kit
@jhscheppele2448 Жыл бұрын
That bucket has had a hard life.
@garyclark1135
There is a tool to put that seal in a kidney shape.
Farm on the Range
Рет қаралды 48 М.
FarmCraft101
Рет қаралды 216 М.
TheFritz423
Рет қаралды 23 М.