Learning Sculpting, Molding & Resin Casting✨MY OWN MODEL HORSE✨(& Overcoming Struggles Too!)

  Рет қаралды 8,596

Creative Kristen Taylor

Creative Kristen Taylor

Күн бұрын

Welcome! I'm excited to share with you my journey of creating my own model horse from scratch, including all my challenges, my struggles of overcoming perfectionism, & the moments of joy. This is going to be a chatty art vlog as I show the creation process of making an artist resin horse, from sculpture to final cast.
Given this is my first time sculpting and molding a realistic horse, this video is focused on entertainment as I share both my successes and failures; if you were looking for a tutorial instead, I've linked helpful videos from other channels below.
✨VLOG HIGHLIGHTS:
○ Sculpting with Milliput epoxy putty over a wire armature (aka sculpture frame)
○ Pouring my first multi-part silicone mold
○ Casting with polyurethane resin & exploring mica powder with resin
○ My struggles & lessons learned from my first sculpting & resin casting project
○ A brief look at my older sculpture attempts
▶️ YOU MIGHT ALSO LIKE:
○ Sculpting & casting my SECOND HORSE: • Learning to SCULPT a H...
○ My playlist of model ANIMAL process videos: bit.ly/3IrumYO
○ My playlist of model HORSE process videos: bit.ly/3CaXcYp
○ My playlist of OTHER ART media, both horses & animals: bit.ly/3KTO7d7
🎨🛠️ TOOLS & SUPPLIES used in this video are listed below!!! These are items I have purchased for my own use (or are similar to what I use) & the links are purely for your own convenience.
📚🎓RESOURCES
Since this video is an entertainment vlog and not a tutorial, here are some of the resources I found helpful as I taught myself the sculpting, mold making & resin casting process:
○ Mold making basics:
• Alumilite Academy: Mol...
• Basics of Mold Making ...
○ Mold making techniques:
• Silicone Rubber Moldma...
• Mould making
• How To Make a 2 Piece ...
○ Resin casting techniques:
• Urethane Resin Casting
○ Molding & casting horses & animals:
• Video
• Laying up clay for a s...
• How I cast my Resin Mo...
• How to make Two part S...
• Casting an Allosaurus ...
• From Sketch To Sculpt:...
○ Materials & tools explanations:
• Alumilite Explains...
• When to Use a Pressure...
✨SCULPTING TOOLS & CLAY:
○ Magic Sculpt epoxy putty amzn.to/3aPbyQD
○ Milliput Terracotta epoxy putty amzn.to/3DIshTi
○ Milliput Superfine White amzn.to/2Ttu6O3
○ Clay shapers, affordable mixed set amzn.to/2RLiLIK
○ Needle point clay sculpting tool amzn.to/3rXP2iH
○ Masking tape amzn.to/3uWgMGv
○ Blue shop towels amzn.to/3to0WSG
○ CA glue (Superglue, Gorilla Glue, Locktite, etc)
○ Galvanized steel wire for armature building amzn.to/38p3Ccc
○ Garden shears for cutting wire amzn.to/38RFeAa
○ Calipers for measuring amzn.to/3xuur7m
✨MOLD MAKING & RESIN CASTING SUPPLIES:
○ Smooth-On Oomoo 30 Two-Part Silicone Mold Making Rubber bit.ly/3d993OA
○ Smooth-On Mold Star 16 Fast Two-Part Silicone Mold Making Rubber bit.ly/3Srbdt1
○ Smooth-On Smooth-Cast 300, 305, 310 Urethane Casting Resins (305 ended up being the best for me for this particular project) bit.ly/3d4UETt
○ Ease Release 200 bit.ly/3btJyXC
○ Mica powder
○ Affordable makeup brushes for dusting molds amzn.to/38zATxC
○ Latex-free gloves amzn.to/2J3QPxl
○ Cups for mixing amzn.to/3PX145B
○ Stir sticks for mixing
○ Paper towels for cleanup
○ Foamcore
○ Clay
○ Painter’s mask a.co/d/gnMHzSs
○ Replaceable cartridges for my painter’s mask amzn.to/2vEKf88
✨PREPPING & PRIMING TOOLS/SUPPLIES:
○ Duplicolor Sandable Primer amzn.to/3xVSJ9a
○ Files amzn.to/2YeVuAr OR amzn.to/2H2Gmz1
○ Sandpaper amzn.to/2DRGyjE
○ Sanding sticks amzn.to/3quQRDx
○ 3M Ultra Fine Hand Sanding Pad amzn.to/35qvnzp
○ Hobby knife amzn.to/3MO0lSM
○ Goggles for protective eye-wear amzn.to/2ZZEu2w
○ RZ mask (what I use for prepping) rzmask.com/
✨VIDEO CHAPTERS:
00:00 Sculpting a Model Horse from Scratch
02:47 How I Worked Past Perfectionism
03:48 Making a Mold for My Horse Sculpture
05:25 Making Resin Copies of the Horse
06:56 Results
#milliput #sculpture #moldmaking #resincasting #clayart #sculptingwithclay #horseart #animalsculpture
🔍You might enjoy this video if you were looking for:
Sculpting a horse in clay
Make a horse out of clay
Clay horse making
Horse model making
Model horse sculpting
Mold making for sculpture
Make a mold of a clay sculpture
Sculpture mold making
MUSIC:
Music from KZfaq Audio Library.

Пікірлер: 34
@cauldhound
@cauldhound Жыл бұрын
Honestly I think it's great when you talk more. Your voice is very calm, and you have great advice to give that I think even artists using other mediums can take value from. Often any artist is too obsessed with perfection and it can be so harmful. This viseo was genuinely so nice and helpful.
@DenisWisestorm
@DenisWisestorm Жыл бұрын
I fell in love with your channel. So proud of you for finishing your very first resin! Looks amazing! Btw your voice is so calming I could just fall asleep listening to you talk lol
@Raccoonboi634
@Raccoonboi634 10 ай бұрын
Hello Denis! :D
@TumbleCreatures
@TumbleCreatures Жыл бұрын
What a great video. I love what you said about perfection especially 👏
@SpruceHollowStables
@SpruceHollowStables Жыл бұрын
It’s amazing how well you do this! You don’t get enough credit for how amazing these are and you inspired me to sculpt my own model horse, it’s almost done, just legs and hair remaining! I want to put mine in resin too, which is perfect because my family is getting into resin now! You should finish the one you started, it looks great. I love your videos and just subscribed! I’d also love to see you sculpt more models from scratch! I’ve watched this video over and over and love it all! You are very funny (in a good way) and your voice is beautiful. I’ll be watching more future videos! ❤
@CreativeKristenTaylor
@CreativeKristenTaylor Жыл бұрын
Eeeeeeee, I’m so happy to hear you’ve started sculpting!! And that’s perfect your family is getting into resin as well: I think I sense a bright sculpting future for you. And thank you! 🥰 Rae certainly opened up a world of sculpture for me and I’m sure she won’t be my last scratch built
@DryadsBounty
@DryadsBounty 4 ай бұрын
I can imagine there is more challenge left on the cutting room floor as you worked your way through this process?! Your creation is gorgeous!
@CreativeKristenTaylor
@CreativeKristenTaylor 4 ай бұрын
Awww, thank you so much! 🥹 And yes, this 7 minute video highlights what was a little over a year of work (more if you count all the failed attempts of my youth I needed to make to get to making Rae 😅)
@DryadsBounty
@DryadsBounty 4 ай бұрын
A year...good for your for sticking to it!@@CreativeKristenTaylor
@kusuri91
@kusuri91 Жыл бұрын
Congrats! I like how chill you are about the process. Perfection is my biggest obstacle and your approach gives me hope of one day finishing a horse sculpt. Looking forward to seeing your painted copies!
@CreativeKristenTaylor
@CreativeKristenTaylor Жыл бұрын
Aww, thank you, and you can do it! I truly believe anyone can do anything if they give themselves the time
@FaceMaul
@FaceMaul Жыл бұрын
Always a big fan of your severely underrated videos. Very informative and congrats to you for such a personal feat! You did amazing!
@CreativeKristenTaylor
@CreativeKristenTaylor Жыл бұрын
Aww, thank you 🥹🥰 Maybe someday they’ll reach more people. For now I’m just happy to share my hobby adventures and have a little fun with the filming process.
@kreuz.control
@kreuz.control 5 ай бұрын
Thank you for posting your process. I stumbled on your videos a week or so back and it reignited my desire to do my own horse sculpture ive been putting off for 2 decades. I put 4 hours into one last night and while unintentional it looks like a mix of body and personality of all of my horses. For my first attempt at sculpting ever Im super proud of it. My biggest mistake was too much tinfoil in the areas I needed to be daintier so I ended up with a draft cross when adding the clay lol. I used apoxy sculpt. Im not sure if it was from one of your videos or another. But thank you none the less!
@CreativeKristenTaylor
@CreativeKristenTaylor 5 ай бұрын
Awwwwww, I’m so happy to hear this 🥹 Yay for an awesome sculpting session! Sounds like you’ve unlocked a new chapter of creativity. A draft-cross was an excellent solution (plus I always love seeing more draft type horses in the world).
@buckeye.breyers5
@buckeye.breyers5 Жыл бұрын
I've absolutely loved seeing her progress on instagram and she's truly an amazing sculpt!
@CreativeKristenTaylor
@CreativeKristenTaylor Жыл бұрын
Aww, thank you! Glad you enjoyed the progress pics
@rae-leef.3463
@rae-leef.3463 Жыл бұрын
Wow… something with the same as me, spelled e same too! That doesn’t happen often!
@GaleneIanthe
@GaleneIanthe Жыл бұрын
What a lovely little horse! Can't wait to see you paint the copies made of her. I just adore her sweet face! I don't know if you feel she's good enough to sell any casts of in the future, but know you've got at least one person out there who would gladly buy one :)
@SpruceHollowStables
@SpruceHollowStables Жыл бұрын
I would gladly buy one too!
@flufflewarrior
@flufflewarrior Жыл бұрын
I can't believe how detailed the face is on this scale! Like I can't even do something like that on a Traditional scale :'D Also I think your first sculpter is adorable!
@CreativeKristenTaylor
@CreativeKristenTaylor Жыл бұрын
Thank you so much 😊
@vezhopkins714
@vezhopkins714 Жыл бұрын
I have done a 1/6 model like this only laying down and some details are missing so I can custom them better :) (the mould took 10 litres of silicone !)
@CreativeKristenTaylor
@CreativeKristenTaylor Жыл бұрын
Oh, wow, that’s a lot of silicone! Happy to hear you tried mold making a 1/6 horse. I’d love to see people make more in that scale
@not.hatguy
@not.hatguy Жыл бұрын
are you selling some copies? because im so in love with this cutie 😍
@CreativeKristenTaylor
@CreativeKristenTaylor Жыл бұрын
Aww, I’m happy to hear you love her! 🥰 I don’t know at this time, as I’m still very much in the learning stage of mold making and resin casting 😅
@ellidowen1685
@ellidowen1685 Жыл бұрын
this might sound like a dumb question but where can you find the mold pieces to make your own horse? I wanted to do this but don't know here to look sorry if it sounds dumb.
@CreativeKristenTaylor
@CreativeKristenTaylor Жыл бұрын
Not a dumb question at all! I’m using Smooth-On products and I bought mine at my local Reynolds Advanced Materials, but you can also order those shipped directly from Smooth-On. Other places to find or order similar products are Tap Plastics, Brick In the Yard Mold Supply, Amazon, and Alumilite (your local Walmart, Hobby Lobby or Micheals craft store might have some Alumilite products as well).
@ellidowen1685
@ellidowen1685 Жыл бұрын
@@CreativeKristenTaylor alright I will try those i was going to ask you that as well i am planning on purchasing a blank resin model then getting that stuff you got to put around him like you did with the blank model but I wanted to talk to you first because since I never dome this etc... but I would love to make my own customs or resins to paint. I just dont know if I need a mold a d other stuff and I feel pretty silly asking because I dont want to waist the person time etc... I hope.im making sense. Thank you also for replying back i really appreciate it. :)
@CreativeKristenTaylor
@CreativeKristenTaylor Жыл бұрын
Is this blank resin you’re hoping to make copies from a resin you sculpted yourself? If it was sculpted by another person, I would highly urge you to reach out to that other person first and ask if it’s okey to make a mold from their work, as many artists don’t allow reproduction of their work without permission (and some may say no to any reproduction at all, which is why it’s all the more important to ask first).
@ellidowen1685
@ellidowen1685 Жыл бұрын
@@CreativeKristenTaylor sorry for the late reply she actually told me that it still needs some work done but she disnt have time that's why shes selling it because of so many horses I told her I could do it etc... it was just an idea because I didnt want to mess up the model so that is why I'm asking if i can get this mold and kit stuff if they have the model shape so I can make my own. I hope I'm making sense.
@ellidowen1685
@ellidowen1685 Жыл бұрын
But I will ask her
@saimanisha4378
@saimanisha4378 10 ай бұрын
Make videos in elephants also
@CreativeKristenTaylor
@CreativeKristenTaylor 10 ай бұрын
That’s a great idea! I’d love to sculpt an elephant
How to make your own clay horse model (THE BASICS)
9:42
Creative Kristen Taylor
Рет қаралды 963
Altering a Breyer MODEL HORSE, Start to Finish (The Complete Customizing PROCESS)
35:10
顔面水槽をカラフルにしたらキモ過ぎたwwwww
00:59
はじめしゃちょー(hajime)
Рет қаралды 36 МЛН
Тяжелые будни жены
00:46
К-Media
Рет қаралды 5 МЛН
[Vowel]물고기는 물에서 살아야 해🐟🤣Fish have to live in the water #funny
00:53
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 118 #shorts
00:30
The Making of ODYSSEY | Breyer Model Horse Drastic Custom Tutorial
13:20
Tips And Tricks For Making Miniatures
21:12
Robert Tolone
Рет қаралды 189 М.
Making Very Large Silicone Molds
12:06
Eric Strebel
Рет қаралды 191 М.
The Magic of Monster Clay! All About, Tips & Tricks
13:15
DeeJayBe Studios
Рет қаралды 43 М.
I sculpted a draft horse & learned new polymer clay techniques!
11:14
Creative Kristen Taylor
Рет қаралды 588
Making a Drastic Custom Breyer Horse From Start to Finish
42:06
Star Bat Craft
Рет қаралды 8 М.
How to Make Reusable Molds (CHEAP)
11:15
Proko 3D
Рет қаралды 44 М.
MAKE your own SILICONE MOLDS on a budget
5:07
Tiffany Solorio
Рет қаралды 784 М.
Let's Pour Silicone without instructions...
18:30
Jazza
Рет қаралды 2,2 МЛН
20 Easy Epoxy Resin Ideas That Are At Another Level | by @LETSRESIN
11:32
Куда мы с Никой поехали?
0:41
Привет, Я Ника!
Рет қаралды 983 М.
Sigma girl have a good heart #shorts #tiktok #sigmagirl
0:37
mountainlion5
Рет қаралды 8 МЛН
路飞给小孩做了个好榜样#海贼王 #路飞
0:36
路飞与唐舞桐
Рет қаралды 6 МЛН