Leodis Leather New Workshop

Leodis Leather New Workshop - #2 Lighting

Рет қаралды 3,790

Жыл бұрын

► Buy my patterns and leather goods here: leodisleather.etsy.com
► For more information see: ianatkinson.net/leather/videos...
In this video I am installing the blinds and lighting for the new workshop. The blinds were pretty easy but the lighting was quite complex as I wanted three lights which could be individually switched and which were positioned over the new benches. I used the Quinetic wireless system again to achieve that and added some 20mm conduit and housing for the control units. The lights themselves are Knightsbridge SUR5LED 45W LED surface mount panels putting out 4790lm each .... so nice and bright 😎

Пікірлер: 26

@Leodis.Leather Жыл бұрын

In this video I am installing the blinds and lighting for the new workshop. The blinds were pretty easy but the lighting was quite complex as I wanted three lights which could be individually switched and which were positioned over the new benches. I used the Quinetic wireless system again to achieve that and added some 20mm conduit and housing for the control units.

@kettyandkitty Жыл бұрын

The workshop is coming together nicely! I realized recently how much I love watching simple videos like these, where people just share their work and passion for the craft without clickbait or unnesessary "entertainment" bits in them. Such content is getting harder to find nowadays, so I really appreciate your effort to film and upload these, even though you are busy with setting up the new workshop. Wishing you the best:)

@sedulousdabbler5468 Жыл бұрын

I admire the fact that you have a go at this kind of work, but a little knowledge would save a whole load of work.

@Leodis.Leather Жыл бұрын

Meaning what, you think I did some of it wrong?

@sedulousdabbler5468 Жыл бұрын

No not at all. A knowledge of building construction would allow you to have known which way the ceiling joists run made it easier to figure out a less complicated way of routing the cables. Being a builder, I have a huge amount of experience to draw on. My comment, although badly worded, was not meant as a criticism I assure you.

@strickostricko Жыл бұрын

@@sedulousdabbler5468maybe not criticism but unnecessary, nevertheless.

@sedulousdabbler5468 Жыл бұрын

Yes, on reflection, you are absolutely right.

@dormindont1 Жыл бұрын

У тебя будет самая лучшая мастерская в Шотландии! You will have best workshop in Scotland!👍👍👍👍👍💯

@Leodis.Leather Жыл бұрын

I might except I live in England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

@dormindont1 Жыл бұрын

@@Leodis.Leather акцент похож на шотландский. Your accent maybe Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿?

@Leodis.Leather Жыл бұрын

No, I live in Yorkshire and I have a Yorkshire accent

@dormindont1 Жыл бұрын

@@Leodis.Leather ok, I wrong.

@Lapeerphoto Жыл бұрын

Clean - nicely done.

@crypto_pinto2660 Жыл бұрын

How many folks have already asked where are the leather videos that we miss so much? Workshop starting to look great

@Leodis.Leather Жыл бұрын

Too many 🙃

@802Leith Жыл бұрын

Amazon sells some battery powered led motion sensor flat cabinet lights would be nice under the bench cabinets

@sgtrock6213 Жыл бұрын

I'm sure you are excited to finally get your workshop up and running after all this work you have had to do in the past months...

@ronfleecs3666 Жыл бұрын

Just curious, are your lights/outlets 240 V or 120V ? Watching from across the pond! Good work, BTW.

@Leodis.Leather Жыл бұрын

240V in the UK (well, technically 230V +/- some tolerance to match Mainland Europe)

@ronfleecs3666 Жыл бұрын

Thanks...I really appreciate/enjoy your engineering brain! Looking forward to your journey!

@patw999 Жыл бұрын

Great job although with as fast as you are working you would have to charge by the minute.😮

@Leodis.Leather Жыл бұрын

this was all done months ago and it took me a loooooong time, I've only just been able to sit down and make the videos

@bbrachman Жыл бұрын

Did I miss something? When you add the other wireless switch, (near your far bench) how do you pair both switches to the same light controller? Just curious.

@Leodis.Leather Жыл бұрын

You can pair multiple switches to the same controller you just follow the same pairing procedure. I think each controller can be controlled by up to 10 switches if you need to (and since the switches just broadcast their ID a switch can control unlimited lights). This is one of the great things about the switches you can do one way, two way, two way and intermediate et cetera all with no wires. The examples I have done with them on video are quite simple but for example for my outside lights I have a controller on the house porch as well as a controller in the garage and I then turn all the lights connected to both controllers on simultaneously either from a switch in the house, a switch outside (because they are IP rated) or from a key fob on my keys! It’s like a Lego, you can do a lot with it :)

@bbrachman Жыл бұрын

@@Leodis.Leather Ian, I think I got confused because you buttoned up the central box and did not show the second switch being paired. Not know how intricate opening the box up again made me think you did it befor e closing it up. Thank you. Love watching the progress.

@Leodis.Leather Жыл бұрын

@@bbrachman I did pair all the switches before I closed up the box yes but it's only 4 little screws if the cover does need to come off again :)