In this video, I'll make a tumbler inspired by The Creative Siren. I use Crystalac products, which are a non toxic epoxy alternative. They come out just as beautiful, but the process is a little different.
Check it out!
Some links are affiliate links, there is no additional cost to you, but I earn a small commission
1. Prep your tumbler
2. Paint it white and then paint it with Glow in the Dark spray paint white:amzn.to/3kLbSqj Glow in the Dark: amzn.to/3okQFpv
3. Let dry and gas off for 48 hours
4. Apply 1 coat of Crystalac Brite Tone and let dry 4-6 hours: amzn.to/3kPelQIamzn.t...
5. Cut out your designs in scrap vinyl or stencil vinyl and apply to tumbler
6.Spray paint with your base color and let dry 20-30 minutes:amzn.to/3lZBRK0
7.Drizzle with Dawn dish soap and spray with 1st accent color: amzn.to/3ES4rFI
8. Rinse and let dry 20 minutes
9. Repeat with 2nd accent color: amzn.to/39MjSRI
10.Let dry another 20-30 minutes and carefully peel off your vinyl
11. Let gas off for 48 hours
12. Add three coats of Brite Tone, letting cure at least 4 hours between coats
13. Gently sand with high grit sand paper: amzn.to/3oghZoA
14. Wash with Dawn, rinse and dry well.
15. Apply any decals you want
16. Apply layers of BT until smooth. (4 hours cure time between coats, light sanding every 3-4 coats)
17. Let cure 5 days
18. Clean up any paint or product on the rim or inside of the cup
19. Enjoy
Brite Tone will continue to harden over the next 30 days. I suggest gentle use until then.