Lian Li O11 Vision Review

Рет қаралды 13,414

Күн бұрын

In this video I review the Lian Li O11 Vision PC case and answer the important question of should you get this case?
00:00 Intro
00:17 Case features
05:22 Build footage
06:13 Thermals
06:54 Build Experience
08:21 What I liked about the case
09:30 What I didn't like about the case
11:57 Should you get this case?
My full step-by-step build guide for this case is available at • Lian Li O11 Vision Bui... a time-lapse of the build can be seen at • Lian Li O11 Vision Build and photos of the build at pcpartpicker.com/b/GDF8TW
Parts used in the video (Amazon links are Affiliates Links)
• Lian Li O11 Vision
UK - overclockers.co.uk/lp/lian-li...
US - www.newegg.com/p/2AM-000Z-000...
CA - COMING SOON
• ASRock Phantom Gaming Z790 Riptide WiFi
UK - www.newegg.com/global/uk-en/p...
US - www.newegg.com/p/N82E16813162149
CA - COMING SOON
• Intel Core i9 14900K
UK - amzn.to/46GuSvD
US - amzn.to/3QEI8eQ
CA - amzn.to/3QzznCG
• Lian Li Galahad II Trinity Performance 360
UK - www.overclockers.co.uk/lian-l...
US - amzn.to/4633sip
CA - amzn.to/3SsKCOK
• TEAMGROUP T-Force Delta RGB DDR5 32GB Kit (2x16GB) 6000MHz FF3D532G6000HC30DC01
UK - amzn.to/3REE7aW
US - amzn.to/46pnK6q
CA - amzn.to/48uvaXE
• Lexar NM790 2TB
UK - amzn.to/457Bh2k
US - amzn.to/3s3Qgvl
CA - amzn.to/43X0bjL
Thermaltake Toughpower PF3 1200W
• UK - amzn.to/3PECirP
• US - amzn.to/3EZJhqI
• CA - amzn.to/3F1ynAF
• Gigabyte Aorus GeForce RTX 4070 MASTER
UK - amzn.to/426Cbds
US - amzn.to/3Vwz3Wh
CA - amzn.to/3Ll6Tc5
• Lian Li Uni Fans AL120 V2 Triple Fan Pack
UK - amzn.to/3tYMtAu
US - amzn.to/3QsRQzD
CA - amzn.to/3MpYC7J
• Lian Li Uni Fans AL120 V2 Single Fan
UK - amzn.to/3stHCXv
US - amzn.to/3SugJ0s
CA - amzn.to/3MuBdCj
• Gelid Solutions GC-Extreme Thermal Paste
UK - amzn.to/3tzlnwT
US - amzn.to/3mM8Sdm
CA - amzn.to/3xp1n0Z
• Maidesite Standing Desk S2 Pro Plus - shrsl.com/3wwme
Affiliate links
I am part of the Amazon associates program, this means I get a small commission when you buy through these referral links.
Music
Dream Caster - LUPUS NOCTE
www.epidemicsound.com/track/H...
#pcbuild #lianli #gamingpc #buildcomputers #tutorial #beginnersguide #buildingpc #electronics #personalcomputer #budgetgamingpc #budgetpc

Пікірлер: 63

@LifeIsButaBluff 8 ай бұрын

Another great and detailed review, thank you.

@ChristopherFlannigan 8 ай бұрын

Thanks for watching!

@sweeleangloh 8 ай бұрын

As always, a very detailed review!

@ChristopherFlannigan 8 ай бұрын

Glad you liked it!

@bromovich8058 8 ай бұрын

Very good review as usual. Have you considered reviewing the H6 Flow? Apparently it's a top air flow performer. I'm sure your audience would love to see that. I know I would.

@dovibellon8349 7 ай бұрын

What a banger used for the B-Roll dammmmmm

@jettsom 6 ай бұрын

This case needs the Lian li reverse blade fans.

@debatebore1057 6 күн бұрын

Appreciate the build video and this extensive review. I was pretty hyped about this case and excited to order it. However, after this video and several others, Im souring on it. The part of the case above the motherboard is just...empty. So much empty space, especially when going with a dual rear fan setup. Going with a single fan helps with the empty space issue, but not much. I think an air cooler could disatract from that, but most of us aint putting an air cooler in there. Hence, we install an AIO and then we're left with cables from the AIO being exposed running up into the top space. I could tolerate that, but, again, all that open space at the top just makes the case feel empty despite all the great parts we install. I think IM going to build in the 011D RGB.

@sevsnk3043 8 ай бұрын

Any chance for a fan placement video for this case?

@everymangamer1608 6 ай бұрын

Great video. Just wondering why the aio is push pull and 6 fans? Can we just use the stsndard layout but set to intake without push pull? Thanks

@nielswolf6013 7 ай бұрын

Why didn't you use the Lian Li UNI FAN SL-INFINITY REVERSE BLADE for the side and bottom? For the rest a great review Christopher!

@overlance 3 ай бұрын

earned a new sub! do you think theres a major difference in the thermals compared to the o11 dynamic evo?

@iHaveTheDocuments 7 ай бұрын

My next case. Case and infinity fans are on the way.

@aidansedore5182 8 ай бұрын

would this fit a aero 4090? my 12pin connecter is always touching the glass and i dont want that

@midicronica1 5 ай бұрын

What kind of screws did you use for the aio for push and pull ?

@Jordiephotography 7 ай бұрын

Thanks for the explaining and the effort to show . I am thinking aout bying this one . 😊. But can i ask why the radiatior is upside down? don`t you get airbubbels on the top of it ?

@ThijsSH 7 ай бұрын

Yup this is true, he needs to rotate the rad by 180 Edit: just remembered it doesn't matter cause there's still a tank on the top side of the rad. So as long as either end is higher than the pump it is okay.

@thefluxlife 8 ай бұрын

Goodness I hate to admit I enjoyed the build montage music.

@boosivemotorsportofficial 7 ай бұрын

I know the cpu temp is high but intel. Especially their 14th gen chips. Are well known to run hot anyway. This case would be better suited for AMD Ryzen I reckon 🤔

@marcosv8426 8 ай бұрын

I wonder how this case would look with the vertical GPU mount. How much worst will the GPU temps be compared to the EVO?

@inmitch 6 ай бұрын

Yeah, it might even be cooler, as hinted by Christopher with the regular 011 Evo Case. Pretty sure he showed a few degrees cooler with the regular Evo, with a Vertical mount.

@jakerhodes8523 3 ай бұрын

Could you do three bottom intake and back two as intake and use the side aio as exhaust. Alittle bit of postive pressure but better then six intake and two exhaust??

@TheSjuris Ай бұрын

Much better to cool aio with air from outside the case.

@86669Tommy 8 ай бұрын

Thank you for the review. I would appreciate an expert's take on negative vs positive flow with this case. You opted to make the side fans push, which has downsides of "positive flow" being less efficient and turbulent, seeming out of balance with 6 push vs 2 pull, and there seems to be no dust filter. However that's only theory and a side pull config may have drawn too much hot air from the GPU into the AIO radiator. Would you be willing to spare some thought and share your considerations? Will you plan to thermal test the various possibilities? (I am planning on 2x 120mm rear exhaust, 3x 140mm bottom intake, but not sure yet whether to get push or pull side fans, and thus whether to buy reverse fans or not)

@ethenjordan2010 7 ай бұрын

I got reverse fans. Why not, they look 10x better. Also seen a lot of reviews do two exhaust and 6 intake like this with good results.

@ThijsSH 7 ай бұрын

Yup, 6 intake and 2 exhaust is the way to go

@paul_7612 6 ай бұрын

I got mine with 3 bottom intakes, side mounted aio with intake pushpull config and the 2 rear fans as exhaust. The temps are like 1-2C more than the standard O11 so nothing to worry about... old glory R7 5800X3D with 4080 Founders. NZXT kraken Z73. All the fans are Lian li AL120 and the other 3 in pushpull on the aio are the pre-installed NZXT ones

@StelsAssassiN 8 ай бұрын

Can we use uprigth gpu brackets for 40xx dynamic evo in this case? I want the gpu on side intake, bottom 3 140 intake and aio 240 on back for test. Pleeeeease!!

@ChristopherFlannigan 8 ай бұрын

I don't have the bracket for the EVO so couldn't test it

@StelsAssassiN 8 ай бұрын

@@ChristopherFlannigan =(

@MichaelJohnson-gr4yy 8 ай бұрын

I just found this video because I'm considering this case. But WHAT IS THAT CASE IN THE BACK??? That case looks AWESOME!

@ngkraft4242 8 ай бұрын

Cooler Master HAF 700 EVO

@Propixia 8 ай бұрын

He has a review on it

@ChristopherFlannigan 8 ай бұрын

HAF 700 EVO

@NFHKarma 8 ай бұрын

The Hyperion gr701 was also in the back

@JackTotGaming 8 ай бұрын

about to do a new build and not sure if I should go with this or the Phanteks NV5, any thoughts? I am leaning towards the NV5

@DariusPL 8 ай бұрын

I have exactly the same question 😁

@JackTotGaming 8 ай бұрын

@@DariusPL I am really leaning towards this now lol; it just looks so good! I also have limited space (height wise) and this comes in a good bit shorter.

@ChristopherFlannigan 8 ай бұрын

NV5 is cheaper, but this one looks better

@JackTotGaming 8 ай бұрын

@@ChristopherFlannigan after seeing all these review videos I am going with the O11 Vision; it just looks so good.

@mcod99 8 ай бұрын

Not a fan of this version, I prefer the aio on top.

@ChristopherFlannigan 8 ай бұрын

EVO perfect for you

@mcod99 8 ай бұрын

I think so, the XL edition looks great. @@ChristopherFlannigan

@ShabazDraee 7 ай бұрын

Do you think the AMD Ryzen™ 7 7800X3D and the 3080 ti would be too hot for this build?

@ShabazDraee 7 ай бұрын

Also I was thinking of having rear with two exhaust 120 m and base with 3x 140 mm intake and AIO with the gigachad version as intake. Would that work for this build?

@SupremeMp4 7 ай бұрын

I'm planning a 7800X3D build with a 6800XT so hopefully it isnt too hot@@ShabazDraee

@JohnnyZenith 8 ай бұрын

Have you ever reviewed the Corsair 5000x? That would be nice.

@TheDaveyd29 8 ай бұрын

glass top, madness, its a nope from me

@ChristopherFlannigan 8 ай бұрын

Each to their own

@TheDaveyd29 8 ай бұрын

@@ChristopherFlannigan sorry i should have addedm, this is just regarding the case, your vids i will always watch you gdo a job job my man, thank you

@wankerka 8 ай бұрын

With out the top fans is a bit concerning for me...... well see for now

@ChristopherFlannigan 8 ай бұрын

No problem

@ACE112ACE112 8 ай бұрын

00:37 35kg of mass*

@ACE112ACE112 8 ай бұрын

i/o at bottom oof

@hanskreider9824 7 ай бұрын

Hahahha that was also the first thing I thought 😅

@xXEPIKgamerXx 7 ай бұрын

Only flaw is it doesn't have the IO accessory that I can move the IO to the bottom left closest to me.

@manny2684 8 ай бұрын

Why does your case look so beat up?

@IIV_ThePatriot_XII 4 ай бұрын

Franchement.....comment tu as montée ton watercooling, Faut pas le monter dans ce sens, bon nombre de vidéo américaine/anglaise/française etc... sur youtube précise qu'il faut pas monter un watercooling avec les sorties vers le bas, regarde comme c'est tendu franchement....

@ysoserious8526 8 ай бұрын

Why the Hell is AiO built in this way? Everyone knows that the pump has to be on the highest point not the lowest. This build will start to be pretty noisy after a while. Edit: I am stupid it is built in correctly. But still: If I ever plan to build a system with an AiO, I would NEVER buy a case that has no option to put it at the top of the case. It is always the best choice for an AiO. This case is bettter for Custom Lopp builds.

@StelsAssassiN 8 ай бұрын

Oh, you have to see video from gamers nexus about aio. In this build aio stand correctly.

@ysoserious8526 8 ай бұрын

@@StelsAssassiN You're right. I was stupid, sorry. I watched the Video and also JayzTwoCents Video. NOw I get the science behind it correctly, SO thx for your comment. But still: If I ever plan to build a system with an AiO, I would NEVER buy a case that has no option to put it at the top of the case. It is always the best choice for an AiO. This case is bettter for Custom Lopp builds. And i still have to say that the Hardware components aren't matching good here. Why would anyone match a 14900k with an 4070? And when you do it like this a 1200W PSU is complete overkill.

@StelsAssassiN 8 ай бұрын

@@ysoserious8526 custom will be fine. I think, he have deadline from lian li and take 4070. Ty for answer)

@ThijsSH 7 ай бұрын

@@ysoserious8526not true, it is better to have the AIO at the front as intake. Maybe unless you have it as intake at the top, I don't know what the temps would look like this scenario tho