We just purchased this exact same shed. Took roughly 7 hours to complete. Snapping corners was tricky, but manageable. However, installing the roof on final corners was a challenge, take your time and it helps if your walls are level. I did about 95% of the build myself, it helps to have someone help with the roof installation.

this took 14 hours to complete. we had help from dad, mom, son, daughter, and grandma. we literally used every single tool we owned to finish this. if anyone is looking to do this shed, just know what your in for. if it wasn't for this video the time would've DOUBLED without it. we spent $1000 on this shed, but still we had SO MUCH TROUBLE WITH IT. first of all, we spent multiple hours pushing on the corner walls. we straight up used a sledgehammer to try to get it in. at one point we ended up having THE ENTIRE FAMILY hanging on one of the corner walls to push it in, but only ended up breaking the plastic 😭. and with the doors, the precision that we need to fit the door into place was insane. then the panel that went on top of the back wall DIDNT ALIGN WITH IT. we had to drill new holes into it. moral of the story: be ready for this project people. cause it's nearly impossible.

No matter what you do you’ll never click the corners in that easily

Expectations 40 mins to get done. Reality me and my son 7 hours plus some help from the wife and daughter. But now it is done.

Is there a special trick to get the left corner wall panel in? The right back panel gave us lots of trouble too. It's not as easy as the video shows.

The video was pretty helpful,so easy to follow ,Thank u so much 😂❤

I just bought one from BJs and it was very complicated to assemble. This video helped a lot but it is a lot of screws. I can fix pretty much everything in a home or car but it took me and my wife 6 hours to assemble together. A lot of parts could be combined in one piece but they complicated in many small pieces making the assemble longer to finish.

I would have burned my plastic shed if wasn’t for your video. Thanks

Putting my shed together at the moment. I’m stuck on Section 6.4 where you connect screws to panel. Instructions say put in 18 screws but my panel only has 12 holes for that part. I’m I missing something?

I bought this shed from Home Depot. When I unboxed one of the carton I noticed that the panel with the window was damaged. Because it didn't affect the assembly I decided to wait and see about getting a partial refund. the biggest problems were with the corners. I managed to get three in with a lot of work. The left front I haven't as yet. The video does not show you how the trusses are supposed to line up with the out side wall. Being honest, the written directions stunk. Now to the shelf. I snapped all four pieces in like he did with the video and then proceeded to try and screw on the edge brackets. Those snap-in pieces just spun around and I couldn't tighten the screws. Speaking about the snap-in pieces, those two you tap in to the header piece, even with a light tap they both shattered. We're due for a heavy rain tonight and into tomorrow and we're slated to have snow this weekend. As of now I have no one to help me and can't find a contractor to put it up. As a disabled vet I was hoping for a better product with clear instructions and made in the US. I should've just made it out of pressure treated lumber and it would've been done already. I've spent easy 16 hours already with very little to show for it except three walls and three corners. Because the left front one won't snap in I can't even finish installing the front gable and doors. To say I'm thoroughly disgusted with Lifetime is an understatement! Will not recommend them to anyone I know.

Agreed excellent video, the paperwork assembly manual is good but confusing at times and so, frequent referral to the video is necessary. However, just to comment that the UK supplied shed has some slight design changes including a different shelf fixings and a continuous sky light. One word of advice for anyone buying this excellent USA made (I think?) and that is to spend time and effort on constructing a perfectly level and square base as with an engineered product you cannot make modifications to any dimensions as with a wooden shed. The only real issue was the corner sections which would not bend in to a true right angle and thus had to be persuaded to fit the floor slots. This means that the dark brown corner trims will not fit, not a major problem weather wise, and probably down to the low ambient temperature in spring UK. The video is made indoors under perfect conditions and I am guessing quite warm? Oh, forgot to say, that I had to use some rope to pull the two long side walls together temporarily whilst I fixed the roof trusses in place.

Thanks for the video, it is way better than trying to decipher the instructions. I am more of a visual learner it seems. One thing that bothers me with mine is that the shelving didn't come with the brackets but instead plastic fold-able flaps at each end which are way to flimsy and don't feel as secure as a nice bracket for support.

best to use both directions, the manual and get a good look at the whole video before building...stark realization before watching the video,,,i bolted the panels together before standing them up on the floor....ha!! They are installed separately!!!

I just was installing my shed, and once I got to the last roof piece and the back wall gable it’s not even close to lining up. :(

Do the doors have to be installed?? I’m looking to attach it to the end of my greenhouse and I have a 2x6 frame at the base of the green house that I don’t want to cut out.

If itis going on top of concrete, do I need a frame under or just set up on top of concrete?…

In Step 11.3, did he screw the window into the frame so the bottom 2 panes don't have any window? Is that how it is supposed to be?

How big are the 2 boxes that the shed comes in? Will they fit in a midsize suv?

Wait are you telling me I don’t have to dig out the ground around it? Because I wanna buy this shed I already broke ground to level it up and idk if I have to Anchor the shed to the ground

Thanks But I bought this one. Would the same steps apply for this one? I saw the one you did with the 60075 and this was more at depth on the build. Lifetime 60075 8 x 15 Ft. Outdoor Storage Shed, Desert Sand is what I have bought to build. TY

I cannot click the corners in no matter what I do or how many people help. Is there any way to get it to go in easier besides the block

Not the same shelf. But this is the video in my instructions

Hello, after building my shed {three months ago}, i noticed gaps that developed at the doors. The gap is between the doors and the side panels of the shed. Not sure why this happened but any advice on how to fix it is appreciated

The door Spring on the door latch broke in 10 times of shutting them. Had to re drill the door to get the spring to work. Ahh Not happy and worried what's next to fail.😔😪

Does it matter which side the window is on

Shelf is trash the holes for brackets keeps popping out of walls and keep spinning in the wall itself

I just unboxed and did the parts preassebly, if it wasn't for the video it would be a challenge to do if you don't want to spend a lot of unnecessary time trying to figure out the vague and poorly illustrated instructions that come with this kit..

The corners were very difficult, and if you don't get it just right, the rest of the wall will be off, so that when you get to the next corner, it won't fit. How do i know this? I had to take a whole wall down and try again. It still didn't fit, so that the top of the wall was not even with the top of the corner. The poles for the door hinges would not fit into the holes in the floor, regardless of how long and how hard we beat on it with the rubber mallet. The hole was just too small for the pole! I had to buy a $80 heat gun and stretch the plastic to widen the hole. This step could have broken our marriage if I hadn't thought of the head gun. Either that, or my husband would have set the shed on fire! Just kidding. Kind of. We are currently working on the roof, and some pieces are bowed, so the screws won't even reach the plastic of the roof. We tried having a second person push down on the roof, but that wasn't enough. We'll go back to the hardware store tomorrow to buy longer, large head screws to replace the screws provided. We had the same problem with the shelf that another comment shared. The black pieces you screw into that are supposed to expand into the wall instead just spin. So the shelf is not sturdy at all. We'll probably just dispose of the shelf and use a stand alone unit. As frustrating as these issues were, the instructions and video were so much better than the instructions that come from other products. I would suggest a pause to see the part whenever the statement "oriented like this", so that you can actually see which way it needs to be oriented. We watched those parts over and over trying to capture the frame that would show which way the part went. We haven't quite completed the project. For the price, I would have expected better quality in the parts that have given us a challenge so far. The pieces should be produced accurately enough to fit. Overall, I think this shed will meet our needs.

Not impressed with shed warping from sun now screws are coming loose on roof . And haven't even made my first payment 🙃

good video my friend.Could not have done it with written instructions only Thank you

still confused ? You didnt mention the supports on the window panel and I see no place that looks like thats were they go ?????