LISTEN TO THE TIRES!?

Рет қаралды 1,010

11 ай бұрын

LISTEN TO THE TIRES SKID WHEN I BRAKE!
The purpose with this vehicle is to create a very dynamically rolling car, extra exagerated body roll and super supple suspension, it's usually run on dirt off road.
I installed a steering and suspension kit on this vehicle and currently testing it. I will be assembling a video of my findings to share
Subscribe so you dont miss the detailed video
It’s a Drift kit from ‪@MRC-MATRIXRACINGCLUB‬
Here are the links to Amazon products below,
anything you buy using any of the links, including items not listed, will go towards supporting the channel and I appreciate anything anybody can and cannot do.
STEERING SERVOS - amzn.to/46JHRgv
JIS SCREWDRIVER - amzn.to/44oMU4f
RALLY WHEELS AND TIRES - amzn.to/3riCUeg and amzn.to/3OdYdqD
TIRE GLUE - amzn.to/3NRgmZL
FLAT PLIERS - amzn.to/3O8gCF3
SHOCKS - amzn.to/3PUXEmM
ANTI WEAR GREASE - amzn.to/43o45ll
AIR BLOWER - amzn.to/3JXY8Vo
HOBYYWING 1060 ESC - amzn.to/3pEBrPf
Thank you again for all and any support

Пікірлер: 30

@RCBirds 11 ай бұрын

This looks more than soft. But as I saw it going round the corner it got me

@alantaylor353 11 ай бұрын

That looks fantastic.!!

@AddamsPlayground 11 ай бұрын

I loved the tires chirping! For a bouncing suspension it did very well at keeping it steady! Looking forward to seeing what all you got in there!

@JF-RC 11 ай бұрын

Hi there Rex, a nice first test. Looks like the setup was quite soft. Best wishes 😊😊

@curtisgalbraith8324 10 ай бұрын

I did something similar to my tt-01. Still 4wd but long supple suspension mod that lets it roll, squat, and dive so nicely. It's great on gravel too! If I get a tt-02 I'll mod it like yours! Thanks for such great videos!

@terence79chan 11 ай бұрын

It reminds me of Echo1 from the childhood ghost busters days..so cute and yet a solid performer at the same time . 😍

@terence79chan 11 ай бұрын

Haha I mean Ecto-1

@RFVCXR200R 11 ай бұрын

Reminds me of the suspension on my FAV. When it comes to suspension on my Tamiyas, it's pogo or no go.

@tm5123 11 ай бұрын

Dont think I've heard tire squeal like that on a RC car before, lol. Thats great! :D Look forward to see the detailed version :D

@MegaSockenschuss 11 ай бұрын

I love this thing - it's radiating fun! At least the springs are a bit too soft, imho. A good indicator is the part on the sidewalk around 1:50, when the car don't even out after breaking to still stand. I know you north americans folks love your boaty cars suspension wise, but still. 😅

@rexrcs 11 ай бұрын

🤣

@UncleBobsRC 11 ай бұрын

DUDE!!!!!!! Tire Barking!!!!!! You need to put a tight Tee shirt on the car with all the bouncing 🤪

@lo2713 11 ай бұрын

More bounce than a lunchbox 😁

@rexrcs 10 ай бұрын

Im thinking of adding weight and stiffer springs for more bouciness what do you think, how else can i get more bounce , do you have any suggestions for me? 🙏

@lo2713 10 ай бұрын

@@rexrcs weight should help, i think 🤔 friction shocks will be ideal 😁

@MauzyrockRC 11 ай бұрын

Wow smooshy suspension. It looked awesome. Would you get a sway bar kit for it?

@rexrcs 11 ай бұрын

Id live some soft sway bars for this, Sadly there isnt a straight forward solution for sway bars, Ive seen some custom set ups and the one rcracer presents on his blog but ive accepted my tt-02’s wont be top tier. Sad because the SR is now wasting away because it isnt allowed in any tt-02 races, and it needs a sway bar badly on the carpet surface, i might just turn the SR into a drift car. The TT-02R is being saved for when I may be able to get out to a parking lot race

@chibiskyrc 11 ай бұрын

I love how the motor sounds like tiny engine too

@mtbsyd 11 ай бұрын

Nice video. Now the next step is to see if a dual rate system can be made to give you the lean but ramp up to prevent bottoming out.. none the less I love the compliance of the suspension

@bluegroovemodelsports9650 11 ай бұрын

First comment.....great video

@lemsrccargarage 11 ай бұрын

Looks great. I would suggest to switch to progressive springs instead of linear. Do you have access to a 3d printer? 👍😍

@rexrcs 10 ай бұрын

sadly i do not yet have 3d printer, I need to get one, maybe you guys can teach me how to use it. i was thinking adding weight and stiffer spring maybe it will bounce more and quicker?

@lemsrccargarage 10 ай бұрын

or anti rollbars. @@rexrcs