How To Hand Build The Perfect Mug

  Рет қаралды 100,396

Little Street Pottery

Little Street Pottery

2 жыл бұрын

We've had numerous requests for a video specifically focused on the construction of Ann's geometric mugs. This very detailed, step-by-step guides the viewer through the process of creating the perfect mug! This is also a relaxing pottery video to just watch Ann work as well.
If you would like to learn Ann's underglaze painting, glazing, and decorating process then check out Ann's Video Workshop Series. These workshops are very detailed (typically 1.5 - 2 hours in length) where Ann provides step by step instruction and are designed to help potters take their work to new levels of craftsmanship and artistry. vimeo.com/showcase/6725318
HERE ARE THE LINKS TO SOME OF THE TOOLS ANN USES:
Xiem Tools X-Bevel Bevel Cutter for Pottery and Ceramics:
amzn.to/3jbsBAT
Cutting Mats: amzn.to/3iHNRzq
Also check out the BEST pottery tool makers in the universe:
Hand Extruder from our friends at Diamondcore: diamondcoretools.com/collecti...
Here is the rubber mats we use to make our stamps: amzn.to/3etFx3z
Dowel Rods: amzn.to/3dgHJuZ
ProPlus Sponge: amzn.to/35963KE
Ultimate Edger: amzn.to/2Ss5zMX
Brushes Ann Uses: amzn.to/3orvX4y​​​​
Best Red Ribs Package: amzn.to/35Q2GrP​​​​
The Cameras we use: amzn.to/3n79LML​​​​
Best Cheap Lens we film with: amzn.to/3jiHOyW
ALL of the music used by Little Street Pottery is legally licensed from Artlist

Пікірлер: 151
@sarahkewin9678
@sarahkewin9678 8 күн бұрын
You are the Bob Ross of pottery. It's so relaxing to watch you work, and I'm learning so much!
@sinsinnomore5555
@sinsinnomore5555 2 жыл бұрын
Finally, a Perfectionist Potter! I've watched other channels where they slop the slip, scribble the design, and wobble the lip... For actually trying to learn this craft by watching others, this is the Quality Instructor needed. Thank You for generously offering this instruction.
@barbwired310
@barbwired310 2 жыл бұрын
I would say that mug is as perfect as human hands can make. Great tutorial-you are incredibly talented in both making and teaching pottery!
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks so much! We really appreciate you watching!
@amyshimm
@amyshimm Жыл бұрын
You included so many important details, and the video angles were so clear. It's one of the best handbuilding videos I've seen!
@shaunhall960
@shaunhall960 2 жыл бұрын
I'm a jewelry artist just getting into working with clay. I think whenever you start working with a new medium it really does kick your creativity into overdrive.
@sherierodrigues1569
@sherierodrigues1569 2 жыл бұрын
Dear Ann. I would just like to say how much I appreciate your videos. I know they take time and effort, you are so beautiful and generous to share your art with us, I along with all your many fans, have a lot of pleasure listening to your very calm voice and watching your hands create fabulous work. I go tomorrow to our local pottery group for the first time, and I will be taking a far amount of your tips with me, I'll blow them away lol. Thank you, l like your style. Sherie Rodrigues from Australia 😍
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks Sherie! Would love to see your work! Thanks for watching and the kind words!
@dickwhite8246
@dickwhite8246 2 жыл бұрын
Very nice tutorial. An idea - when preparing the handle blank for attachment, rather than cut the top end square with a knife or needle tool, I use a large biscuit cutter or circle cutter that approximately matches the diameter of the mug rim. That way, I get a concave end on the handle that better matches the mug where I am attaching it.
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Great idea! Thanks for sharing!
@carolynpearce4829
@carolynpearce4829 Жыл бұрын
Pastry mats! I use a pastry rolling pin because I don’t have a slab roller either, but I never thought of using pastry mats. So glad I watched this older video.
@pottery59
@pottery59 8 ай бұрын
Thank you for producing and sharing this video. It is QUITE helpful. I have made many-a-mug but now it's time to move away from a *rustic* look of my mugs to a more *refined* look. This video is exactly what I need as a tutorial to accomplish that. Your presentation is perfect! And kudos to the videographer; it's very well shot.
@LittleStreetPottery
@LittleStreetPottery 8 ай бұрын
Thank you for watching - glad it was helpful!
@freesurfable
@freesurfable 2 жыл бұрын
Thank you Ann for sharing generously the different steps to create this beautiful mug. Your tips and tricks are precious especially for a beginner. Hello from south of France
@montgomery59
@montgomery59 4 ай бұрын
I've been struggling with bottles (mostly to have a nice oil bottle for beside my cooker), but I am reasonably confident in closed forms. I hadn't considered closing the form and then adding spout or pourer to the form. I know what I'm throwing tonight!
@mindygeist7157
@mindygeist7157 5 ай бұрын
Thanks so much! I never would’ve thought to use my wheel for a hand built mug,you’ve just made my life so much easier and answered so many questions 😊☕️🍩💕
@grammyscat422
@grammyscat422 Жыл бұрын
Great tutorial! I lay a piece of plastic wrap over the slab after texture and cutting and before picking it up. It helps to keep finger marks off of the texture when wrapping and connecting.
@mamemckee2190
@mamemckee2190 2 жыл бұрын
Great demos, Ann. Thanks!
@heatherjonz102
@heatherjonz102 2 жыл бұрын
I love it! Beautiful mug!!
@amandaraddatz5874
@amandaraddatz5874 2 жыл бұрын
My Goodness that’s an amazing mug. Thank you for taking us through the process!
@camistonge
@camistonge 2 жыл бұрын
Really great tutorial. Thank you teaching.
@kizzygee123
@kizzygee123 2 жыл бұрын
This is a really good tutorial! Thank you for this!
@dianemoore5985
@dianemoore5985 2 жыл бұрын
This is one of the best I've seen on handbuilding a mug! I'd like to see you post elaborating on drying to prevent warping. Thank you so much!
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
With porcelain like mine I have to really allow it to dry slowly. I cover with plastic and keep it away from the air conditioning for the first 24 hours. You can’t rush porcelain, it’s a diva clay! Other more groggy clay may be more tolerant to dry quickly but I’ve only been working with porcelain.
@adrianasilveira4561
@adrianasilveira4561 2 жыл бұрын
What a lovely design.
@morningcoffeepottery5416
@morningcoffeepottery5416 11 ай бұрын
Beautiful!
@BBugel
@BBugel 2 жыл бұрын
I have rarely learned as much from a video as I did from this one!
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks 😊 I appreciate you watching!
@carolthomas6337
@carolthomas6337 Жыл бұрын
Thank you Ann.
@francesgribbon5322
@francesgribbon5322 2 жыл бұрын
Thank you for this video!
@eileenc5159
@eileenc5159 6 ай бұрын
Thank you sooo much for this video. I had not seen it on line before although you did it 2 years ago. So helpful. You have gone over such important steps like using the shrinkage ruler, beveling the edges. Perfection. I am so appreciative. I will watch the video on making the stamp. You’re super terrific. ❤
@pritinagwani507
@pritinagwani507 Жыл бұрын
Excellent, highly precise job.
@colettevarize4230
@colettevarize4230 2 жыл бұрын
Beautiful work. I love it
@conniemezzo9370
@conniemezzo9370 2 жыл бұрын
Ok Ann...you have convinced me to try to make a textured, hand built mug AGAIN, but this time using YOUR technique! I have to date been unsuccessful.... But with your video as my guide, I'm going to try again 😊 Thank you for another very detailed teaching video!
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Awesome...would love to see your version!
@annettebowen1540
@annettebowen1540 2 жыл бұрын
So clean, I love that your slabs don’t have bulky seams!
@artemisarrow9545
@artemisarrow9545 Жыл бұрын
simply amazing
@ReapWhatYouSeauxLeJeune
@ReapWhatYouSeauxLeJeune 2 жыл бұрын
Very nice! Great tutorial!
@alphonsechanekayebone7871
@alphonsechanekayebone7871 9 ай бұрын
Beautiful mug and design...
@ECBurt
@ECBurt 5 ай бұрын
Best video for making a handbuilt mug!! Thank you, you do a great job explaining, love your clean edges...and I have to buy that tool for handle making!
@carolynsnyder7043
@carolynsnyder7043 2 жыл бұрын
I always enjoy your videos! This was great instruction for a mug! Thank you
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks Carolyn! I appreciate you watching!
@BBugel
@BBugel 2 жыл бұрын
Thank you for this wonderful video!
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
You are so welcome!
@Spinquilter
@Spinquilter 2 жыл бұрын
Fabulous tutorial. All of your tutorials are fabulous and easy to follow!! Thank you!
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks- I appreciate you watching!
@nancycowell-miller4321
@nancycowell-miller4321 2 жыл бұрын
Great detailed demo! Thanks 😊
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks for watching!
@tksmith3698
@tksmith3698 2 жыл бұрын
Thanks Anne
@BenLe42
@BenLe42 Жыл бұрын
Thank you so much! What a great video. Your attention to details shines through all your work! The devil is in the details, and you aint got no devil left in any of these mugs
@LittleStreetPottery
@LittleStreetPottery Жыл бұрын
Glad you liked it!
@jillwhite790
@jillwhite790 2 жыл бұрын
Excellent video! Thank you for sharing your expertise. I have struggled with hand built mugs, but now I'm more hopeful.
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks Jill! Keep trying!
@taliawurtzelhirsh9474
@taliawurtzelhirsh9474 Жыл бұрын
This was a great video!! I made 2 beautiful mugs after watching.
@LittleStreetPottery
@LittleStreetPottery Жыл бұрын
Awesome! Would love to see - feel free to drop a link in the comments to share your work!
@juliatoft9183
@juliatoft9183 2 жыл бұрын
So very grateful to you for making these high quality videos. Yesterday I hand built a mug which would have been so much better if I had only watched your video first! Today I will try a second one haha. Again, thank you!
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks Julia! That makes my day and is why we do it!
@marilynbruce753
@marilynbruce753 2 жыл бұрын
I can only echo all the other peoples responses. I really need this tutorial thank you.
@alexforget
@alexforget 2 жыл бұрын
I really like your video, they are very well shot and narrated.
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks! We appreciate you watching!
@danenderle3580
@danenderle3580 2 жыл бұрын
Fantastic tutorial! Thank you for time and effort it went in to share your talents with us! Your instruction is very clear, through your voice and quality camera work! The music is also very relaxing to accompany your beautiful creation.
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks Dan!
@maryamvlogs432
@maryamvlogs432 2 жыл бұрын
Very nice good job 👍
@charlottesmom
@charlottesmom Жыл бұрын
Arrgh!! I just bought canvas cloth to make a slab rolling board, I could have saved some $ by using pastry mats 😫. I also bought 1/4" square dowels to put on either side of my rolling pin to get the desired thickness and I know I have at least two yardsticks hanging around the dowel was only $1.00 though. This is the first video of yours I've seen....so far and definitely bot the last!
@LittleStreetPottery
@LittleStreetPottery Жыл бұрын
Yeah, we go cheap here at LSP! :)
@simonebertino8600
@simonebertino8600 2 жыл бұрын
Nice work
@Pherine1
@Pherine1 2 жыл бұрын
Excellent Ann, I hope my mugs will improve x x
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
I predict they will! :) Thanks for watching!
@peterl4864
@peterl4864 2 жыл бұрын
WOW!
@livingtheplantedlife
@livingtheplantedlife 12 күн бұрын
Very pretty 🤓
@Lisa-om1zn
@Lisa-om1zn 6 ай бұрын
I’m new to slab pottery. I love your videos, I learn so much. May I ask what is the tool you used to work on the bottom section?
@zeliaq
@zeliaq 2 жыл бұрын
I licked it vey much. Great tutorial. Thanks a lot.
@jackiemorrison6024
@jackiemorrison6024 2 жыл бұрын
Thank you Ann for making this. I did a pm to you on fb asking you to do this video. Fb gave me a time out of 7 days 2 days ago. They misread a post but there is no way to fix it so will just have to wait it out... thanks again..Im going to try this
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Whaaaa??? That's weird...I hope this is what you and others were looking for - we had fun making it!
@sharonsabbagh1457
@sharonsabbagh1457 2 жыл бұрын
Great demonstration. Question which wheel are you using ? Question. Your slip looks thicker is there a recipe you would like to share?
@freddiemoretti8456
@freddiemoretti8456 2 жыл бұрын
Cheers...Freddie
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Hey Freddie! Hope you are doing well!
@agentcomptable1091
@agentcomptable1091 8 ай бұрын
the best
@Jawst
@Jawst Жыл бұрын
Thank you so much for this tutorial it's absolutely brilliant, way better than anything else I found! ❤️ is it possible to glaze the mug with a basic sodium silicate wash to make it food safe and retain all of its features?! A lot of people use sodium silicate for cracks effect, but nobody I've seen has done any videos about using it as a sealer and glaze!
@LittleStreetPottery
@LittleStreetPottery Жыл бұрын
OK - sodium silicate is not a glaze - we just used it to dry out the clay - the silicate actually burns away in the fire. You can use it to decorate the mug with the silicate (as we did) but you will need to bisque fire (to your clays specifications for vitrification) and add a glaze on the inside to prevent staining from any liquid poured into it. Hope that helps!
@janjones8229
@janjones8229 Жыл бұрын
Ann, thank you for your generosity in sharing your knowledge through these expertly made videos. May I ask, how long is the handle section? Warm regards!
@LittleStreetPottery
@LittleStreetPottery Жыл бұрын
These are about the same as the height of the mug - 6"
@teralee4987
@teralee4987 Жыл бұрын
This is possibly the best slab mug tutorial that I've seen (and I've paid for online workshops...). Quick question - do you let the slab dry a bit before shaping it around the cylinder? Thanks in advance!
@jimruel2121
@jimruel2121 Жыл бұрын
Hi Teralee! Yes, Ann let’s it dry just a bit (so the clay does not slouch) when wrapping. It’s porcelain too so it dries out pretty fast.
@denisewood9636
@denisewood9636 2 жыл бұрын
Great video, thank you! Can you explain how you finished the top of the handle, it looks like you added a band there?
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Yes, sometimes I add a little band around the top of the handle both as a decorative transition (especially on larger mugs) and to add a little strength. I just roll out a little coil, wet it and attach. Thanks for watching!
@linesydclb8845
@linesydclb8845 2 жыл бұрын
Hi Anne, thanks for the video - you have such a lovely narration voice. Where do you get the ruler that gives the clay shrinkage, please?
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks Carolyn! I got the ruler from Diamondcore. There is a link in the description for the extruder that should take you to their site. Thanks for watching!
@ellenhorovitz3517
@ellenhorovitz3517 Жыл бұрын
Great video, can you reference where you bought your extruded tool and the bevel maker for joining the cuts? Thank you in advance
@LittleStreetPottery
@LittleStreetPottery Жыл бұрын
Diamondcore - other link in description.
@deeraun-linde9711
@deeraun-linde9711 2 жыл бұрын
Thank you for the wonderful demonstration! Beautiful hand built mug!! I also love that geometric shape. Can you tell me where you purchased it or who makes it? Thx!!
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
We made our own patterns from rubber mats...check out the videos from 2 weeks ago...it explains how we made them. We are working with someone to potentially produce these for us so subscribe and stay tuned!
@deeraun-linde9711
@deeraun-linde9711 2 жыл бұрын
@@LittleStreetPottery Thank you! I’ll check it out!
@user-pr7op5oe5j
@user-pr7op5oe5j 8 ай бұрын
very, very beautiful and accurate! what kind of ceramic mass did you use?
@LittleStreetPottery
@LittleStreetPottery 8 ай бұрын
Standard Porcelain #365
@brucewohlfeld2157
@brucewohlfeld2157 Жыл бұрын
Great instruction! Where did you get the angle cutter?
@LittleStreetPottery
@LittleStreetPottery Жыл бұрын
In the description
@laelhouse
@laelhouse 2 жыл бұрын
좋은 설명 감사합니다 잘배우고 갑니다 구독 좋아요 누르고 갑니다
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
대단히 감사하고 환영합니다!
@bbjo787
@bbjo787 2 жыл бұрын
I always love your videos, however, I would LOVE to have seen the finished product after glazing.
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Yep...us too! We try and combine work to minimize firings and saving energy. You might like tomorrows video short coming out...start to finish in 60 seconds!
@leslieg8219
@leslieg8219 2 жыл бұрын
Where did you get the handle tool from? Beautiful mug and your instructions are wonderful.
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks... Diamondcore makes the handle extruder
@carolinacamargo3159
@carolinacamargo3159 Жыл бұрын
Great video! How humid/dry should the slab be?
@LittleStreetPottery
@LittleStreetPottery Жыл бұрын
I cut mine right off the slab so its wet but not sloppy...not leather hard either. Thanks.
@cathyschlereth9824
@cathyschlereth9824 10 ай бұрын
Ann, can you tell me the measurement around the carpet tube is that your using. I tried one from our carpet store and it seems too large. Thanks so much. Cathy S
@dlmcder
@dlmcder Жыл бұрын
What type of clay do you use and where could I purchase it and what is the con firing for this particular Clay thank you for the information.
@mkamb2159
@mkamb2159 Жыл бұрын
Hi there! Thank you so much for your amazing tutorials ❤ I noticed when I make a slab of my buff smooth it’s really too wet to manipulate afterwards. So I role out a bunch and sort of leave them out to harden a bit before making mugs. The consistency of your slab in the video looks like you’ve done the same. I wanted to ask, is it something you do or recommend? Thanks again - your fan
@LittleStreetPottery
@LittleStreetPottery Жыл бұрын
I typically can use the clay right after rolling out - but that will depend on the clay. If your clay takes a little time to set up then what your are doing makes sense. Thanks!
@mkamb2159
@mkamb2159 Жыл бұрын
@@LittleStreetPottery thank you!
@augustawallace3422
@augustawallace3422 2 жыл бұрын
I noticed a piece of clay that is at top of handle. It looks like a "ring" same shape as extruder and pushed against to fit perfectly
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Yep, sometimes I add that to create a transition between the handle design and mug texture...I think it looks more natural that way sometimes. Thanks for watching!
@lj.3589
@lj.3589 2 жыл бұрын
I noticed that too and was a bit disappointed that it wasn't part of the demonstration as it really improves the appearance of the handle. I can't like the video without that instructional element.
@rachiebunbun
@rachiebunbun Жыл бұрын
Hi Ann! I'd like to ask, where can I find the ruler you used in you video? It's perfect for handbuilding!
@LittleStreetPottery
@LittleStreetPottery Жыл бұрын
I got those at Diamondcore but not sure if they still sell them. If they don't then I'm sure Sheffield Pottery probably has something similar.
@smartypantsify
@smartypantsify Жыл бұрын
Anne, where can I purchase the rubber mat to make the chevron design?
@LittleStreetPottery
@LittleStreetPottery Жыл бұрын
Links in the description.
@erwinmurray3520
@erwinmurray3520 2 жыл бұрын
What type of clay is it
@bettymollick3820
@bettymollick3820 2 жыл бұрын
Where can I purchase an extruder tool like the one used to create the mug handle? What is the exact name of this tool please. I very much enjoyed your video. Thank you for sharing your talent!
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Our friends at Diamondcore has them link : diamondcoretools.com/collections/clay-extruders
@bettymollick3820
@bettymollick3820 2 жыл бұрын
@@LittleStreetPottery Thank you! for your quick response and again Thank You! for your tutorial. I look forward to learning from you in the future.
@deborahvidinha3311
@deborahvidinha3311 2 жыл бұрын
Can you please tell me where to purchase the handle extruder? Mine are plan I like that bump you have in yours
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Diamondcore...there is a link in the description....enjoy!
@deborahvidinha3311
@deborahvidinha3311 2 жыл бұрын
@@LittleStreetPottery thank you!
@dianemoore5985
@dianemoore5985 2 жыл бұрын
Your clay doesn't seem to stick to pastry sheets, that's good. Is it hard to keep from cutting them when using a utility type knife?
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Sometimes I have to just bend the edge of the pastry sheet to start the peeling of the clay but generally, they don’t stick. (Depends on how wet your clay is too). I don’t use the utility knife on the pastry sheets...just the needle tool.
@dianemoore5985
@dianemoore5985 2 жыл бұрын
@@LittleStreetPottery thanks. Appreciate your videos 🙂
@mjceramics5552
@mjceramics5552 Жыл бұрын
Ann, you said something about refining the rim if you have a banding wheel but I didn't catch what you meant. How can you get that nice rim without a pottery wheel?
@ellen7100
@ellen7100 2 жыл бұрын
Is it porcelain? and which cone? Thanks for the nice videos.
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Standard English Porcelain #365 - Cone 5. Thanks for watching!
@ellen7100
@ellen7100 2 жыл бұрын
Thank you very much, unbelievably, porcelain is burned at cone 5
@williamblack4611
@williamblack4611 2 жыл бұрын
What a beautiful mug. I must have the hands of a gorilla. Just can seem to make hand-built mugs. What are the most important steps in the process.
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Measurements must be accurate! Try not to stretch your clay and mess up your measurements which will induce warping etc. keep going!
@dianemodel5824
@dianemodel5824 2 жыл бұрын
Where do I get the tools you used?
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Diamondcore, the best tools! (And I’m not a paid endorser)
@helenamedeiros5045
@helenamedeiros5045 2 жыл бұрын
😍👏👏👏👏👏👏👏
@dianemoore5985
@dianemoore5985 2 жыл бұрын
Guidance on locating the tubing and cutting mats, please?
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Link to cutting mats in description...the tubing we found in the trash behind the carpet store 🙂.
@dianemoore5985
@dianemoore5985 2 жыл бұрын
@@LittleStreetPottery lol, thank you 😊
@anythingnew001
@anythingnew001 2 жыл бұрын
Did it need firing for finishing? Or not at all?
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
This is just green ware stage...check the community section to see the finished pieces. Or, our video on Glazing Textured Pottery! Thanks!
@anythingnew001
@anythingnew001 2 жыл бұрын
@@LittleStreetPottery ok thanks
@angelasmithers4628
@angelasmithers4628 2 жыл бұрын
Could you say where the tool for forming the foot is from please?
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Hi Angela...I use a hand made wooden tool to form the foot but I’ve seen other folks use a notched credit card etc. check out our “10 Things to Make Your Mug Sexier” video for ideas!
@angelasmithers4628
@angelasmithers4628 2 жыл бұрын
@@LittleStreetPottery Thank you, I'll check it out :)
@marianoarquesmengual1732
@marianoarquesmengual1732 2 жыл бұрын
Where can i buy this? 01:54
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
I used to be able to get them at Walmart but can’t find them anymore. It’s a silicone pastry mat so I’m in search of a new brand. I’ll post if I find a suitable one...let us know if you find one! Thanks!
@maryannreeves3592
@maryannreeves3592 2 жыл бұрын
Please show this using a banding wheel. Many handbuilders do not have a wheel.
@jimruel2121
@jimruel2121 2 жыл бұрын
Noted! Thanks!
@dccreations1361
@dccreations1361 7 ай бұрын
I'm SHOCKED that you wouldn't have a slab roller. Lol
@LittleStreetPottery
@LittleStreetPottery 7 ай бұрын
Too cheap!
How To Throw Taller Pottery
15:16
Little Street Pottery
Рет қаралды 74 М.
The 25 BEST Pottery Texture Tricks!!
12:43
Little Street Pottery
Рет қаралды 103 М.
小女孩把路人当成离世的妈妈,太感人了.#short #angel #clown
00:53
New Gadgets! Bycycle 4.0 🚲 #shorts
00:14
BongBee Family
Рет қаралды 18 МЛН
Hand building a bellied, square foot mug
32:37
Curly’s Clay Creations
Рет қаралды 151 М.
10 Amazing Textures for Pottery - AFFORDABLE AND EASY!
11:50
Little Street Pottery
Рет қаралды 65 М.
Slab Built Mug Tutorial
12:56
Hower’s Art Class
Рет қаралды 145 М.
Hand Building Mugs - Three EASY Ways!
15:39
Little Street Pottery
Рет қаралды 52 М.
Five Easy Folded Pottery Projects! Don't FEAR the FOLD!
17:06
Little Street Pottery
Рет қаралды 363 М.
Hand building a slab mug with texture tutorial
15:09
Curly’s Clay Creations
Рет қаралды 70 М.
How to Make Your Own Pottery Maker's Mark
15:04
Florian Gadsby
Рет қаралды 128 М.
Mug Handle Cracks? The best way to attach pottery mug handles!
20:34
Krystal Osman Ceramics
Рет қаралды 19 М.
5 Ways to Add CURVES to slab ceramics // hand building ceramics for beginners
10:18
MEU IRMÃO FICOU FAMOSO
0:52
Matheus Kriwat
Рет қаралды 9 МЛН
Final muy inesperado 🥹
0:48
Juan De Dios Pantoja
Рет қаралды 13 МЛН