Long Tube Header Install - 370Z/G37 Detailed DIY
Рет қаралды 55,113
4 жыл бұрынThis video is a detailed DIY on how to install long tube headers on the VQ37 engine in your 370Z or G37. Long tube headers are an excellent way to improve the sound of the exhaust note, decrease the weight of the car, and increase peak horsepower through the concept of exhaust siphoning.
This install is not for the faint of heart, as the bolts holding the header to the engine block are very difficult to access. This is not an install for anyone who hasn't worked on their car before. With the right tools however, and following the detailed steps in this video, this project is more than doable.
IG: @the_carizon
Music:
Lakey Inspired - Chill Day
Chill Trap - Mystic Chillhop
I'm Savage - Piano Rap Beat
Lakey Inspired - Warm Nights
Unwritten Stories - In Our Hands
Evan Schaeffer - Around the Bend
Tune Seeker - Summer Breeze
Unwritten Stories - Take Me Far
Sokar Beats - Banger
@David4413 4 жыл бұрын
Wow absolutely flawless video. This is what people need when trying to install the headers.
@thecarizon504 4 жыл бұрын
Thank you! I like document things in detail so others can follow.
@timpeters3952 3 жыл бұрын
Agreed
@v36vhr Жыл бұрын
@@thecarizon504 any tips on installing these? I'm about to order long tubes and I'm planning on installing them myself
@v36vhr Жыл бұрын
@@thecarizon504 did you notice a big difference over test pipes?
@thecarizon504 Жыл бұрын
@@v36vhr no big difference in feel at least from just installing them. Much more noticable difference in weight though. The only way to tell is look at the car performance tuned before amd after.
@AnabolicSonic 4 жыл бұрын
Great video as always, I always use your videos as guides. You definitely are very thorough and I feel slightly more confident tryin this on Saturday.... Also congrats on goin SC!
@abunaiz34nismo68 4 жыл бұрын
Great DIY video. So beneficial! I hope you love your new sound and performance! Sounds awesome!
@vg3348 2 жыл бұрын
Thanks for the video, really helped me install my headers and high flow cats on my 2014 Q60.
@planetearth9316 2 жыл бұрын
WISH ME LUCK my G37's getting them and the rest of the ISR set this Saturday, just wanted to get a sneak peek, awesome video!
@etejeda1984 Жыл бұрын
How did it go with your install? I just did my 370z it was a pain but worth it. Now I need a tune to remove CEL
@ThatRedNismo Ай бұрын
I also made a detailed video on how to do this installation, but the carizon is the goat for making this
@bouttabaglulk2101 4 ай бұрын
Great tutorial!!
@DAZEOFFICIAL Жыл бұрын
I had the honor of going at it twice. For anyone installing isr long tube headers, please use your oem gaskets. Don't use the crap gaskets that come with the headers. It will leak very badly.
@etejeda1984 Жыл бұрын
I just did mine and is throwing a CEL. Did you get that and do you know how to get it removed?
@markdowell619 4 жыл бұрын
Man !! Sorry about the cross threaded bolt and know that would for sure happen to me...Great video..really appreciate your patience and am considering a 370Z ..would love to have similar upgrades as you..
@brandonnumber1112 Жыл бұрын
Thank you doing my headers on my g on Friday
@aaqibkhodra7100 3 жыл бұрын
Loved the video. Very informative. Did have my dying when u said "bust these nuts"🤣
@thecarizon504 3 жыл бұрын
That's how I felt while I was doing that project...
@torvarrisevans7846 Жыл бұрын
Nice bro , was there a big difference in performance over the shorty headers and test
@beanX21 3 жыл бұрын
Yuup I made up my mind about installing headers... I’m taking it to a shop and let them deal with the headache
@thecarizon504 3 жыл бұрын
Not a bad move imo.
@LudeMasta99 3 жыл бұрын
My friend & I used to live a few doors down from you in that same community. I still have only done K&N drop ins to this day... :\ Great videos!
@thecarizon504 3 жыл бұрын
Which car?
@thecarizon504 3 жыл бұрын
Nvm, I remember the pair of Z's, miss seeing them in the garage!
@LudeMasta99 3 жыл бұрын
@@thecarizon504 My friend traded his for an an Alfa Romeo 4C. Quick little sucker. I still drive the black one & my Prelude beater.
@thecarizon504 3 жыл бұрын
@@LudeMasta99 I do like those little 4C's, nice upgrade for sure!
@cre8tivegarage157 4 жыл бұрын
Nice headers 🔥🔥 there probably gonna be loud 👍🏽 like ur good to btw nice nice
@TunaMaster67 3 жыл бұрын
Very helpful video! Can I ask why you went with "Fast intentions" headers? I am installing a complete package on a 2018 370Z. Trying to lock in a exhaust company to get the whole package from. So many shops???? Any advise is appreciated. Thanks
@jonbarlock848 7 ай бұрын
Nice job man and congrats! I have a G37 coupe. I'm debating about getting a plenum power mod, upper & lower port intake manifolds or... long tube headers??? I currently have Stillen long tube intakes, Berk high flow cats and Ark grip exhaust. Thoughts please🤔
@josez3326 3 жыл бұрын
Probably the best DYI video Header install for the VQ lol. What’s the torque specs for the studs and bolts?
@MrMnMade 4 жыл бұрын
this was hella helpful! nice vid! Only question is why did you reuse the exhaust gasket? Since you already had them off why not replace?
@thecarizon504 4 жыл бұрын
Wasn't provided with spares and didn't want to wait for additional gaskets in. The header gaskets I've also heard are reusable, but I would always aim to replace when doing exhaust work.
@lgarla23 3 жыл бұрын
Where did you buy those intake hose's? I need high performance replacements for mine?
@mikeyz131 3 жыл бұрын
Did you reuse the oem header gaskets or use new gaskets?
@richardhepp9544 2 жыл бұрын
Love your videos! Just one question on header installation. You never comment on York specks of header bolts/nuts. Is it a concern?
@richardhepp9544 2 жыл бұрын
Tork specs
@MrDizaier 3 жыл бұрын
i get same harness kit =:) , do u have any issue when u extended o2 sensor????
@johnnyd701 4 жыл бұрын
How will you pass smog with than installed?
@bannyvongphachanh3971 3 жыл бұрын
What’s torque spec on the studs and bolts?
@SimplySteel 2 жыл бұрын
Informative video. For anyone doing this, you may want to crimp those wires instead of soldering especially given their location that is prone to heat and vibration
@sfasiere6737 Жыл бұрын
I crimped mine and they are very secure when I tug on them.
@roadtoamilli1680 Жыл бұрын
@@sfasiere6737hey how did it go crimping them ?! For some weird reason my mechanic hard wired and crimped my extension but it doesn’t want to work !!
@sfasiere6737 Жыл бұрын
@@roadtoamilli1680 There are 4 possibilities - 1. There are 2 black wires for each A/F sensor and they are not interchangeable. 2. The sensors may be covered in anti seize. 3. Don't forget to torque all the sensors. 4. A/F and O2 sensors are not interchangeable. These are everything I avoided for my sensors to work. I drove for more than 5 hours and still don't have a check engine light.
@roadtoamilli1680 Жыл бұрын
@@sfasiere6737okay appreciate it ! Thank you
@emanuelk.9333 2 жыл бұрын
Whoa, I know that road you’re driving on. I’ve launched my mustang there so many times.🤣
@Nickscassera Жыл бұрын
At first I was like dang that looks a lot like where I used to live in Texas. Then I noticed the road signs.. I used to live right near there, small world!
@bp5462 Жыл бұрын
Hey man I know you posted this a while ago I’m about to buy the isr long tubes for my 370 what kind of extension harness do I need I know when you buy them it gives you the 350z extension option on the website would that work or do I need to go another way
@cutsomeone Жыл бұрын
What does exotic mean in exhaust terms? I’ve heard that word used excessively in reference to Nissan exhaust videos.
@blazingverde 4 жыл бұрын
One of the best header intall vids I've seen. anyone know the main diff between long vs short tube headers? just the sound or?
@thecarizon504 4 жыл бұрын
Long tubes allows for siphening, which means more power in the higher RPM range. Shorties are cheaper and allow for customizeability in terms of giving you the option to choose your own down pipes/cats.
@blazingverde 4 жыл бұрын
@@thecarizon504 thank you for the info 👍
@aale7777 4 жыл бұрын
love your Videos by the way your transmission removal video and clutch install really help me alot i was wondering if you could provide me the brand or Part# of that stubby 3/8 ratchet you used thanks
@thecarizon504 4 жыл бұрын
I threw away all the packaging so don't know the model number but I bought them from a home depot as a set. It looks like you can buy off brand ones online as singles for cheap.
@crazykjdm 2 жыл бұрын
Will this fit a 2012 g25x?
@Jeanyuhzz 4 ай бұрын
Does it sound more raspier
@alexsalazar9861 3 жыл бұрын
Will they fit on a g37s?
@aliceinchainz3003 3 жыл бұрын
all i can say is ... i wish you lived next door to me ..lol master mechanic good job.
@ALLVELOCITY 3 жыл бұрын
Left to loosen the bolts on the heat shield right? I’m having a issues where all 3 bolts rounded when I was attempting to remove them and the driver side is the same way. No one shows them removing the bolts. I would assume it’s to the left. But this issue leads to rounded bolts. Can’t even put an Extractor socket on it.
@thecarizon504 3 жыл бұрын
It is to the left yep, normal thread pattern.
@Johnthephoneguy 3 жыл бұрын
Amen, I did short tube and 14 hours later and multiple cuts and massive cursing later it was done. but love the results
@etejeda1984 Жыл бұрын
Have you tune your car to get the CEL removed?
@Johnthephoneguy Жыл бұрын
@@etejeda1984 I have never had a CEL with this setup
@etejeda1984 Жыл бұрын
I thought by installing your long tube headers and deleting the cats would throw a CEL? Maybe I have a bad sensor then of it should not cause a CEL?
@Johnthephoneguy Жыл бұрын
@@etejeda1984 long tube headers, yes. That is why I did short with high flow cats from fast intentions
@etejeda1984 Жыл бұрын
Ok. Yea I was asking for those who did LTH. Thanks though
@Vhr37z 4 жыл бұрын
Currently about to do an install but waiting to get tuned before I do so I don’t mess up my engine
@edgara9316 4 жыл бұрын
You’re vq isn’t gonna blow just because you added long tubes. I don’t know why people are so scary when modding cars. You’ll be fine with no tune. It won’t perform as good as it could but you won’t die
@riomatrix6156 3 жыл бұрын
It shouldn't mess up the engine if you don't run it for a long time without the tune. Also it would be better to do the tune after.
@JDogThrash 3 жыл бұрын
I just bought the Motordyne long tube headers & im not sure if I would be able to do this myself lol. Are there any particular types of shops you’d recommend like a muffler shop or a dealer?
@thecarizon504 3 жыл бұрын
Dealervwould be ideal but it will be expensive.
@williamc1711 4 жыл бұрын
Amazing video, very informative! I noticed that the check engine light wasn't triggered. Did it stay this way or did it eventually turn on? I'm trying to figure out a setup where I don't have any lights go on...
@thecarizon504 4 жыл бұрын
I had the car tuned when I installed the test pipes so it wouldn't throw a code.
@williamc1711 4 жыл бұрын
@@thecarizon504 You're awesome, thanks for the info!
@etejeda1984 Жыл бұрын
The Carizon who did the tune in your car?
@williamc1711 Жыл бұрын
@@etejeda1984 no one....yet! I'm first trying to figure out why the car goes to limp mode even after a fresh start. I keep getting P101 so I'm guessing it's the throttle body as I already got new MAF's.
@etejeda1984 Жыл бұрын
Are you in the DFW area, I'f so you got someone shop to do the tune? Mine seem fine no issue that I know of yet.
@torvarrisevans3961 4 жыл бұрын
Hey bro nice Video , am thinking about adding some shorty headers for my g37. Will I see benefits in hp and what about cel , thank you in advance
@thecarizon504 4 жыл бұрын
You won't feel much of a difference but headers will definitely bring up the power. Long tubes are good for +20-30bhp after a tune. Not familiar with the gains seen by shorties but they are generally less than long tubes. You should only see a cell if you remove your cats.
@torvarrisevans3961 4 жыл бұрын
The Carizon thank you , what about the sound will it make is raspy
@torvarrisevans3961 4 жыл бұрын
The Carizon I have order the shorties header for my g , is it worth it over the stock header. I know that long tube make better hp than the than shorties , but am not a big fan of loud exhaust sound
@MyBryant123 3 жыл бұрын
How many feet do you use in both sides for extend the 02 sensor. ? I going to do this next week on my G37xs
@MyBryant123 2 жыл бұрын
?
@ryanscanlan9875 4 жыл бұрын
Nice vid. Do you think it's worth it on the HR?
@jabari7995 3 жыл бұрын
Hr is worth it, im pretty sure it has more torque than vhr but the vrh has more power
@OGYELLOW 4 жыл бұрын
Why did you reusable the oem gasket? The gasket is alot smaller than the header runners
@TheGuruStud 7 ай бұрын
it's the same size as the head exhaust ports, so it doesn't matter
@ZeroFX32 3 жыл бұрын
Are you going to change the exhaust headers manifold? Fastintentions says to re use the gasket, do you think it's a good idea? Eugene says I have a leak on driver's side and I don't know if re tight headers or put a new gasket this time
@thecarizon504 3 жыл бұрын
I am also experience a potential leak. Can't hear anything, but the afr's are off a point suggesting a header leak. Could be the sensors though. My recommendation would be to change the gasket.
@ZeroFX32 3 жыл бұрын
@@thecarizon504 I put a pair of new sensors and it got just a bit better. After flooring it and stopping or going slow I started to notice fuel smell (like a cold start if you stand outside in the back) so yes, re using the gaskets may not be a good advice from fastintentions
@omarstilllives4188 3 жыл бұрын
I’m looking for sum long tube headers for my q50 3.7, you think you can drop a link of where I can get them?
@CountryQ 3 жыл бұрын
Google isr long tube headers
@Klutcharon 3 жыл бұрын
Hey! Another banger of a video but I have questions I’m new to building cars n I got a z. I installed a borla s type exhaust and I’ve been driving it for a bit and it sounds great but I want a deeper sound and more power. Would headers be the way to go? Also with these headers would I have to change the exhaust I have? Or how would I figure it out? If you answer this thank you so much for your help n time😭🤘🏽
@thecarizon504 3 жыл бұрын
For deeper sound, I would try resonators to pull out the rasp. I am not sure on if they work with the exhaust you have, but an exhaust shop could always put on compatible flanges.
@Klutcharon 3 жыл бұрын
@@thecarizon504 thank you so much for your help I’m sort of clueless out here right now but your channels been a huge guide🤘🏽keep the great videos coming!
@DjNeighborhood 3 жыл бұрын
How do you disconnect the o2 sensor that’s up top?
@thecarizon504 3 жыл бұрын
A lot of patience and scratched up fingers, the space is very tight.
@michaelw4930 4 жыл бұрын
quick question - since I believe you are in the DFW area - does the LTH pass emissions without issue? Was there anything special you had to do to ensure it passed inspection.
@thecarizon504 4 жыл бұрын
I have been running test pipes for two years. It will throw a code for the cats which will cause you to fail inspection, however if you get the car tuned they can turn the circuitry off that checks the o2 limits. This means the car won't throw a CEL which is all the inspectors really look for.
@michaelw4930 4 жыл бұрын
@@thecarizon504 Thanks for the heads up - between the FI catback you installed - which I want to add to my Z; I've been on the fence about getting either LTHs or HFCs. I'm not a 100% sure about SC'ing the Z or just doing FBO; but watching your vids is making me want to SC the Z; I am really excited to see how your SC install goes - bc I haven't seen as much detail as you add to your vids on the interwebz or the Z forums.
@carlosbolanos5361 4 жыл бұрын
I'm shopping for headers , thinking of buying these . I have a stillen exhaust !? You guys think it would sound good ?
@mastertech6049 3 жыл бұрын
Motordyne
@carlosbolanos5361 3 жыл бұрын
@@mastertech6049 They a lil pricey
@anibalmendez6747 4 жыл бұрын
Where can I get those headers do you have the link ?
@thecarizon504 4 жыл бұрын
Google fast intentions long tube headers for 370Z, they make some of the highest quality exhaust parts available.
@raulsaucedo4199 3 жыл бұрын
What header wrap did you use, and hows it holding up.thanks
@thecarizon504 3 жыл бұрын
It was some off brand wrap from amazon, I just searched for "header wrap". And it holds up unless you touch it (for exhaust work).
@markdowell619 4 жыл бұрын
Do the long tube headers create a problem with emissions??? What state are you located?
@thecarizon504 4 жыл бұрын
Texas, and yes, they delete your cats
@t.jaevon 3 жыл бұрын
Do you know if the 370z/ g37 headers would fit in an m37 properly?
@thecarizon504 3 жыл бұрын
Probably not.
@v36vhr Жыл бұрын
I just installed my isr long tubes on my g37. It took me about 10 hours. It was a lot of work but I did it myself
@alexcastro5081 Жыл бұрын
any advice
@v36vhr Жыл бұрын
@@alexcastro5081 hahaha take your time, d o the passengers side first to build your confidence. Soak all the manifolds bolts with pb blaster the day before, you can't use enough of it. Have an assortment of 14mm wrenches , ratcheting wrench, swivel , long flex head rachtes of different lengths , 14mm sockets of different lengths and a stubby rachet. The headers really aren't that bad to do. You'll save a ton of money doing it yourself. Only get longtube headers or z1 motorsports headers. I picked up 15 whp and 6 wtq with long tube headers.
@alexcastro5081 Жыл бұрын
@@v36vhr im thinking about just getting z1 headers but they cost a lot 😂
@etejeda1984 Жыл бұрын
Did you get a check engine light? If so how did you go about removing it?
@v36vhr Жыл бұрын
@@etejeda1984 I never got a cel with the isr lth because the extended j tube on the o2 sensor bung.
@Lofi.z34 8 ай бұрын
I wanna drop this info in there for VHR owners: - Fast Intentions long tubes are the WORST long tubes for the engine: they are too narrow of pipes and non-equal length. - PPE Engineering is the best, they are equal-length and the right diameter piping. I suggest black ceramic coating for heat management. - If you are on a budget, ISR long tubes are a good second choice. They are about 50% equal-length so still better than the FI headers.
@ThatRedNismo Ай бұрын
I’m running PPE’s on my Nismo as well. I love them.
@kevovq3727 Жыл бұрын
Do u need a tune if you install long tube headers?
@roadtoamilli1680 Жыл бұрын
No
@bluecat7574 2 жыл бұрын
Amazing video. I look at my 370z engine compartment and touch nothing. I live in California is there such a thing as California emissions legal headers?
@thecarizon504 2 жыл бұрын
As long as it has a bung for the upper o2's and you don't pull out the catalytic converters you should be ok. That limits your options to just the short headers.
@bluecat7574 2 жыл бұрын
@@thecarizon504 Excellent I did not know that. I will look around for short headers to include o2 sensors. I really appreciate it. Great video.
@williamkennedy8766 3 жыл бұрын
Great video but those are NOT crescent wrenches. They are open/box end wrenches. Crescent are adjustable.
@christiancastro5746 4 жыл бұрын
Oh nice , now I’ll just do this all myself
@vqcyle3206 3 жыл бұрын
What brand headers are these?
@juvenalgonzalez782 3 жыл бұрын
Obx
@Vq_Kev 4 жыл бұрын
longtube headers are amazing!! I got isr longtube headers installed not the brand u went with. Did you feel a big difference?
@thecarizon504 4 жыл бұрын
Maybe a mild difference in power on the top end. Only way to know for sure is to tune and syno it but FI claims 10-15hp in gains.
@MyBryant123 4 жыл бұрын
How Was The Fitment of Header? You had to modify something? Or work with no problems? I ask you because i about 2 days ago
@omarabboud4851 4 жыл бұрын
Hey man wanted to ask i have a g37s coupe rear wheel drive will the isr longtube headers fit on it?
@MyBryant123 3 жыл бұрын
?
@jafaary2614 3 ай бұрын
How tf do i take out the heat shield
@NZ_Lexus_IS-F Жыл бұрын
Why do you need to reorder the the studs, were the header manufacturers too lazy to make a plate that lined up with the original pattern?
@didieresquivel6051 2 жыл бұрын
did you have the car tuned after installing or does this not require a tune to drive like normal
@thecarizon504 2 жыл бұрын
If you are swapping out your catalytic converters yes, I would get the car tuned. I had test pipes before so not as big a problem.
@etejeda1984 Жыл бұрын
@carizon Who did you get it tuned with to remove the CEL since you deleted your catalytic converters?
@k1llerlunat1c78 Жыл бұрын
Did these throw a cel and can you get it off without complete disabling the cel?
@etejeda1984 Жыл бұрын
I just did mine and it did throw a CEL
@k1llerlunat1c78 Жыл бұрын
@@etejeda1984 I appreciate you telling me man! I decided to go with Fast Intentions
@etejeda1984 Жыл бұрын
You went with LTH? Are you in the DFW area? I am trying to find a place who can tune my car.
@k1llerlunat1c78 Жыл бұрын
@@etejeda1984 Dallas Fort Worth? Nah man. Take it to admintuning!
@k1llerlunat1c78 Жыл бұрын
@@etejeda1984 Dallas Fort Worth? Nah man. Take it to admintuning!
@MyBlkG35 3 жыл бұрын
Good job. Are your headers ceramic coated??? If they are, you may want to remove the heat wrap as they will warp the tubes due to overheating. Good luck with your project.
@thecarizon504 3 жыл бұрын
Nope, just sprayed with VHT paint to prevent rust.
@MyBlkG35 3 жыл бұрын
@@thecarizon504 great. Enjoy your ride...
@ThatRedNismo 3 жыл бұрын
Anywhere that I can read more about this? I am about to purchase a pair of used PPE LTH next week, and they are both ceramic coated and heat wrapped.
@MyBlkG35 3 жыл бұрын
@@ThatRedNismo Call PPE, talk to Eric or Paul and they will tell you that ceramic coated headers don't need wrapping at all. Wrapping will deform the tubes and crack them to the point where they will leak and will subsequently have to be replaced. I went through that and it"s a very expensive lesson...
@ThatRedNismo 3 жыл бұрын
@@MyBlkG35 Shit. How long did you have them on your car? The guy I’m buying from says they were on his car for about 1k miles, and they were on the original owner’s car for about 7k miles.
@flipskidaddy 4 жыл бұрын
Feel the pain. I just installed headers, z1 solid mounts, tomei and 3.9gears. my car has been on stand for almost 3 weeks. But getting ready to install a new radiator and she'll be all good to go. I have a 350z btw. But both are a pain.
@Donswan180 4 жыл бұрын
Shorty or long?? It sounds amazing
@thecarizon504 4 жыл бұрын
Long
@crxkid16 3 жыл бұрын
Can’t you see? Lol
@11tahid 3 жыл бұрын
hey i have a 08 g37 would 2016 370z headers fit?
@thecarizon504 3 жыл бұрын
I've been told they di not fit.
@11tahid 3 жыл бұрын
@@thecarizon504 any idea why they dont fit? they both a vq37? the same way you relocated your studs to fit yours i hear it can be done to fit them
@ceejaym10 2 жыл бұрын
this was the most miserable thing ive done to my car myself but it was so worth it
@JoeyAndVehicles 3 жыл бұрын
Does your Z run on a tune? Could you swap these same long tube headers into a stock tune and would it work fine?
@thecarizon504 3 жыл бұрын
You will have to tune to prevent check engine lights since the catalytic converter is deleted.
@JoeyAndVehicles 3 жыл бұрын
@@thecarizon504 Ok thank you.
@etejeda1984 Жыл бұрын
@ carizon who did your tune to remove the CEL?
@VHREDDIE 3 жыл бұрын
Are these equal length?
@thecarizon504 3 жыл бұрын
Yes FI long tubes are supposed ti be equal length.
@GuyX2013 4 жыл бұрын
Do you notice the infamous rasp hiss when rpms come back down to idling speeds ?
@thecarizon504 4 жыл бұрын
You know I was REALLY hopeful this would elliminate the rasp from the test pipes but it is still there, no change.
@dzionassi 3 жыл бұрын
Tell me about performance, was there any improvement?
@thecarizon504 3 жыл бұрын
None noticeable. The only way to tell is on a dyno but you won't really feel it.
@dzionassi 3 жыл бұрын
@@thecarizon504 That what i was told, not worth the hassle if engine is equipt with newer style OEM headers. Probably will go with motordyne type test pipes when hi-flow cats fail...
@vqbeast7502 4 жыл бұрын
Hey man you really didn't have to slice through the 02 Sensors to make them longer. There's a 02 sensor extension harness for Long tube headers. That save you time to do all that work and you could just plug and play the wiring harness.
@damiencole4635 8 ай бұрын
That harness is at least 150
@Chev_chevo 4 жыл бұрын
I just ordered fast intentions catback and test pipes but am torn by max gains from the headers. Are they worth it?
@thecarizon504 4 жыл бұрын
They only provide an additional 5whp of gain over test pipes for natural aspiration. Unless you are really chasing the numbers, it wouldn't be worth it.
@Chev_chevo 4 жыл бұрын
@@thecarizon504 Thanx man 👍
@Danielookinfresh 3 жыл бұрын
Where did you get it?
@thecarizon504 3 жыл бұрын
Fast Intentions
@Danielookinfresh 3 жыл бұрын
@@thecarizon504 thanks!
@Danielookinfresh 3 жыл бұрын
@@thecarizon504 just subscribed, I just watched a couple of videos. Keep it up love the channel
@gary4864 4 жыл бұрын
Took the LTH off my car 2 times now, at this point ide rather pay someone to do it for 400 bones lol
@Skippingworktoday 4 жыл бұрын
are there any goo short tube headers for a 370z?
@thecarizon504 4 жыл бұрын
I hear Z1 makes good shorties.
@Skippingworktoday 4 жыл бұрын
The Carizon I thought those are made for 350’s
@thecarizon504 4 жыл бұрын
Their site claims it fits the 370Z
@ProjectPanda13 4 жыл бұрын
Pretty much any header made for a 350z can fit a 370z/G37. Only thing with using the Tomei or Z1 is you just have to get DE flange test pipes
@flyingjaydenc8734 3 жыл бұрын
Could you do this with a 350z
@thecarizon504 3 жыл бұрын
Yep, and they are almost the same.
@MyBryant123 4 жыл бұрын
What brand bro ISR ?
@thecarizon504 4 жыл бұрын
Fast Intentions
@randyrodriguez4186 4 жыл бұрын
hey fyi its bad practice to use a torque wrench as a breaker bar. it can mess with the calibration
@thecarizon504 4 жыл бұрын
It actually isn't a torque wrench, I misspoke. It's a flexing head breaker bar.
@randyrodriguez4186 4 жыл бұрын
@@thecarizon504 yeah my bad. the video is capped at 360p so it looked just like a torque wrench. and where did you get the flex head breaker bar?
@nokimping4631 2 жыл бұрын
How much horsepower did you gain from this install?
@thecarizon504 2 жыл бұрын
I didn't dyno before and after the test pipes but it's not unreasonable to assume maybe around 10-20 if replacing the catalytic converters. As much as 30+ if your car hasn't been tuned yet and you go for an aggressive tune.
@tybo_g37s Жыл бұрын
"Bust the Nuts...." lol
@ThatRedNismo 11 ай бұрын
Yo, what the fuck? My block does not have empty thread locations for the repositioning of the studs????
@ThatRedNismo 11 ай бұрын
It turns out that on pre 2014 blocks, you don't have to change the studs around. I'll make a video on my installation soon.
@DOMS4. 3 жыл бұрын
I'm here watching this & I don't even have a Nissan anymore.
@henrycesena5481 2 жыл бұрын
No tune is required after the install
@user-dt9kq1xx7k Ай бұрын
Still struggling to have this done lol idk if its different with a G37x but fuck this lol
@B0BBYGAMER 3 жыл бұрын
I wanted long tubes now I'm thinking no fn way hfrc for me
@juvenalgonzalez782 2 жыл бұрын
Do not try to take them off with a 3/8 that will make it hell seriously I had to weld 2 bolts to get them off and to do that I had to slide the headers with my sawsaw
@ProjectPanda13 4 жыл бұрын
Great video. Sub from me
@marshalsiler6580 2 жыл бұрын
Don’t unplug your battery if you have a tune! I was the idiot that did that :,)
@HondaAholic Жыл бұрын
Why not
@TBR972 2 жыл бұрын
Just for ~12 hp in this case don't worth it. But nice vid 👍
@slipknnnot 4 жыл бұрын
This is more difficult than the differential install and clutch ?? tf ? ???
@thecarizon504 4 жыл бұрын
The clutch install was more time consuming but these bolts were harder to get to.
@juniorpro2276 3 жыл бұрын
damn bro you just like me when u call tools by name u make a mistake wrench or ratchet is all the same thing ha.
@haki_amv 4 жыл бұрын
LOL U DID A PULL ON 121 I KNOW THAT SPOT LMAO IT LOOKED FAMILIAR
@TexMoto 3 жыл бұрын
I recognize it too, lol
@ANGRY6LITER 3 жыл бұрын
And its still slow AF. LOL
@Spushed 2 жыл бұрын
So basically what you’re saying is, it is worth the $300 to have a professional with all of their appropriate tools to install at the very least the long tube headers. LOL
@etejeda1984 Жыл бұрын
I dont know of any reputable mechanic that would do this job for $300. Please send me his info if you know of one.
@Spushed Жыл бұрын
@@etejeda1984 it's a header install not a triple bypass surgery. I'd hate to live where you're at if they charge more... My fast intentions LTH and full exhaust install was less than two hours done properly. I know this as I was in the bay watching as it happened. So figure a touch more than $150/hour for the work seems more than fair.
@etejeda1984 Жыл бұрын
If you dont mind me asking you where and what shop you took it too? I have these coming in next week was going to tackle it myself but if its 300 or less to do the job I would consider it.
@Spushed Жыл бұрын
@@etejeda1984 do you live in the PNW? Mine were installed in 2011 over a decade ago. All I remember is that it was in Tacoma Washington.
Lucore Auto and LucoreRacing
Рет қаралды 40 М.
Memo's Garage AZ
Рет қаралды 15 М.
Kapow_g37
Рет қаралды 10 М.
Nguyên Ngốc Shorts
Рет қаралды 833 М.