Longhorn Agile Bridge Design

Рет қаралды 1,067

JRB Tree Climbing and Saddle Hunting

Ай бұрын

The Longhorn Agile Friction Hitch was designed by JRB and has unparalleled performance. This demonstration shows how JRB uses the Longhorn Agile Hitch to create an adjustable bridge design for his primary/long bridge on his tree saddle. Related Videos:
• Tying the Longhorn Hit...
• Tying the Longhorn Agi...
• Longhorn Agile Hitch, ...
• Blake's Hitch Tensione...
#jrbtreeclimbing
jrbtreeclimbing.com/
www.apecanyon.com/ Use JRB15 coupon code for 15% off!
www.rocknarbor.com/ Use JRB10 coupon code for 10% off!
/ jrbtree (Private Group)
/ jrbtreeclimbing (Public Page)
/ jrbtreeclimbing (Your support is appreciated)
DISCLAIMER: Viewers assume responsibility for their own safety. This video is provided for demonstrational and informational purposes only, and is not considered advice nor instruction. Climbing and related knot tying activities are dangerous and should be performed only with appropriate training, supervision and protective equipment. The author disclaims responsibility for the clarity, comprehensiveness and accuracy of the content, as well as all liability for accidents or injuries incurred. - JRB Tree Climbing LLC
#jrbtreeclimbing #treeclimbing #saddlehunting #arborist #climbing #knots

Пікірлер: 19

@kennethrogers1129 Ай бұрын

Exceptional , may have to convert from web bridges to rope and cord

@feldwebel7734 Ай бұрын

Thanks John 🙂

@jrbtc Ай бұрын

You are welcome. This was fun. There's many possibilities for a bridge and I compared many combinations before settling on this combination.

@ChrisTietjen_00 Ай бұрын

Nice system. I know the poachers not as a constrictor knot. Good to see how you assemble everything on site.

@jrbtc Ай бұрын

A standard scaffold or poachers knot will get really tight and be difficult to remove. But with those two extra turns, I find that it is quite breakable and even removable should we need to do so.

@mattvogel5712 Ай бұрын

I’ve learned to tie both the Longhorn Agile Compact and the 523 Ascender. I’ve installed a double adjustable bridge using 9.5 Ghillie rope with 7 mm cord. I rappel with a Carabiner and a Munter hitch on 9.5 mm Rogue with a back up Longhorn Agile friction hitch. I really like the easy one handed tending and the ease of breaking under load. Currently I have the 523 on my adjustable bridges, and the Longhorn Agile on my lineman’s and my rappel rope. You recently answered a similar question, by saying the Longhorn Agile can be used on all three applications, but I’ve seen you tie the 523 Ascender on the same application. My question: which hitch is better for a saddle hunting scenario? This way I only have to master one friction hitch!

@jrbtc Ай бұрын

Comparing the JRB Ascender Hitch and the Longhorn Agile Hitch, LAH is larger, but it's easier to install and remove, and its overall performance is slightly better. Most of my Facebook group members prefer it. With this video, I have eliminated the JRBAH from my own system. I use only LAH and Blakes Hitch currently. By the way, 6mm Sterling TRC will work great with your 9.5 mm ropes and it will outlast other cords such as Sterling standard 7mm accessorycord.

@mattvogel5712 Ай бұрын

Perfect The LAH it will be. I have the Tethrd ESS saddle. It has relatively small aluminum bridge rings which make for limited real estate to tie two bridges with the LAH. I think my final bridge set up is going to be a 9.5mm single adjustable with a LAH and a shorter second non adjustable bridge using the 7mm cord tied with the hunters bend. I really like how the carabiner attached at the crossing point of the two cords positions it nicely for a Munter rappel. I’ll upgrade to the 6mm Sterling. It’s very satisfying creating these hitches and using them in a hunting situation. I feel so much better (safer) on a friction hitch than I do relying on a Ropeman-1. Part of that is because I’ve become super confident relying on the basic Prusik that they began selling years ago as tree stands became more popular, and safety harnesses were included with your tree stand purchase. When I think of the home made climbing tree stands we made as young adults, modeled after the Baker Tree Stand. The risk factor was a 10. It’s a wonder I’m still alive today. It’s been a real joy watching your videos, learning to tie and implementing the various hitches and knots. I appreciate you. Thanks a million 🤘🏻.

@mattvogel5712 Ай бұрын

By the way I’m about an hour south of the Ape Canyon Outfitters in Butler Pa, I think they’re having a grand opening soon!

@jrbtc Ай бұрын

@mattvogel5712 I can relate to your comment about some of the questionable contraptions we used in the past. Now, it's about time we got ourselves and our fellow hunters tied in and safe. As for your 2nd bridge, consider this: kzfaq.info/get/bejne/at5_qNqc35e8n6c.htmlsi=6BHQAoM_rN-JDmqL

@jleatherman2006-yk3mt Ай бұрын

I used 8mm resc tech with 6mm trc to replicate, but not climbed on it yet. The 6mm longhorn agile hitch seems to allow the bridge rope to move too easily in both directions. Will it tighten up once i climb on it? Is there a way to tighten the hitch without having to completely retie? I already weaved the blakes hitch tensioner bridge through for second bridge.

@jrbtc Ай бұрын

Jennifer, I see you just joined the JRB Tree Climbing Facebook group. That's the best place to ask a question because you can include a photo or video clip. It's not possible for me to make much of a guess without seeing what's going on. However, it's recommended that anyone using this bridge design gets familiar with the Longhorn Agile first. It holds well in one direction when configured properly.

@Simon-80 18 күн бұрын

ia the longhorn hitch on the 8mm rope a 6 mm?

@jrbtc 18 күн бұрын

Yes, that is stated in the comments in minute 3. Sterling TRC is 6mm.

@Simon-80 18 күн бұрын

@@jrbtc thx, my english is not the best.

@jrbtc 18 күн бұрын

@Simon-80 no problem. Everyone I answer a question, I double check my website to make sure I answer it there for the next person. jrbtreeclimbing.com/content/bridge/

@Simon-80 17 күн бұрын

@@jrbtc you doing it very well! the most things i understand although iam german. Your Website is very good too. Thanks John

@SteveLeingang 23 күн бұрын

Neat rope work! Learned a few new knots today. Not sure the swivel carabiner is LS rated though. Nice you clearly show how to tie also.

@jrbtc 23 күн бұрын

The Swivel Carabiner used in this video is the DMM Director and it's commonly used by arborists in these applications. I climb with 2 bridges, and connect each bridge independently to my climbing line.