LOOK whats inside these new FORD filters

LOOK whats inside these new FORD filters | FL-2051 vs FL-2124

Рет қаралды 35,236

Күн бұрын

watch me hurt the internet here!!! • Why does your 6.7 oil ...
hold your horses YOU CAN USE THIS TOO!! What's good POWERSTROKE gang!?!?! Ford has came out with a new filter fot the NEW 2023 6.7. Watch tonight as we cut open these two filters that have NOT BEEN used. Which are you spinning on??? THANKS so much for watching each weeks episode, means a lot. Let me know below friends & tell me what you all think! Remember to LIKE - COMMENT - SUB - SHARE #fyp #fordtrucks #oilfilter
Join this channel to get access to perks:
/ @powerstroketechtalkwarod
Need something you see me use, I probably got it on Amazon. Use my link below to get PTT tools
amzn.to/3wGaElA
*****************************************************************
Check out our coffee LINE!!!!!!👈👈👈👈👈👈👈👈👈
society-of-auto-coffee-affilia...
*****************************************************************
To get hooked up like PTT please check out this link!
You won't be disappointed, I wasn't...trust me, ALL worth it!
****** www.limitlessautoworksLLC.com ******
**********************************
CHANGE YOUR Rear End FACTORY FLUID HERE!!!
• FORD Superduty - Rear ...
Check out these other 6.7 Playlists!!
6.7 Oil Seals Replacements
• FORD 6.7 Oil Leak Repa...
6.7 Turbo Videos
• Ford 6.7 Powerstroke T...
6.7 Repair Videos
• FORD 6.7 Powerstroke R...
6.7 Engine Light Videos
• FORD 6.7 ENGINE LIGHT ...
6.7 Maintenance Videos
• FORD POWERSTROKE MAINT...
Check out my Instagram & Facebook
@PTT_W_AROD / Aaron Power Stroke
Business Inquiries: powerstroketechtalkwarod@gmail.com
Music: ------------------------------
Slynk - KZfaq Audio Library
------------------------------
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email powerstroketechtalkwarod@gmail.com
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.

Пікірлер: 131

@PowerStrokeTechTalkwARod Жыл бұрын

these poor keyboard warriors kzfaq.infoE43XPBl1K9s

@Mr42960 Жыл бұрын

I hate to correct a master tech, but I'm pretty certain the dirty oil enters the outside of the pleats and the filtered oil exits through the center. This is why the center of the pleats has a perforated metal cylinder, to resist the pleats from collapsing with the direction of flow.

@360plussynthetics Жыл бұрын

Exactly what I was thinking as I shook my head.

@PowerStrokeTechTalkwARod Жыл бұрын

Hey i just started yesterday🤷‍♂️

@billchmelik5697 Жыл бұрын

@@PowerStrokeTechTalkwARod lol...

@Lawnfella Жыл бұрын

That is correct

@real_ultrajoe Жыл бұрын

Does it matter at this point

@gargar8196 Жыл бұрын

Put the cutter in the vise and use a oil filter wrench to spin the filter

@chainweight6203 Жыл бұрын

Great video! Did my oil change last week. Went to Amazon, long wait for 2051, but have the new 2124's available. Didn't trust Amazon, so I walked into O'Reilly, and all they had available were the new 2124 models at the same price as the 2051 for around $22 and some change. Walmart not up to speed yet. So far no problems, 6.7 running great....thx for all the info!

@loganeley2342 Жыл бұрын

You know Arod has been hanging out with the kiddo when he says stuff like "cutty-wuty". Interesting video, thanks for bringing us along. New filter looks like it might be a hair better

@PowerStrokeTechTalkwARod Жыл бұрын

Logannnnnnnn🫡🫡🫡🫡🫡

@arizonalifestylechannel2186 Жыл бұрын

I had my parts Dept get me a few oil filters for my 6.7 from the Ford dealership next door, come to find that is the new filter. I have one on my truck now after doing my first LOF

@Boogieee215 Жыл бұрын

My most recent oil change which was about 3 weeks ago was with the new 2124 after doing some research. Was caught off guard when I tried ordering a 2051 like always and received an email they were discontinued. I do enjoy wix filters as well

@kellyc2425 Жыл бұрын

I bet your engine would enjoy the Motorcraft filter more 😊

@akbychoice Жыл бұрын

The spring in the bottom is a by-pass spring should your filter get plugged. The oil pressure will push the filter down and flow at the top.

@davecarroll4086 Жыл бұрын

Just bought a 12 pk of 2051s @ $16 each... won't have to buy another filter for quite a while.

@herveyforward5956 Жыл бұрын

Thanks for the comparison. Ford is finally trying to catch up to our Amsoil full flow

@bajamedic Жыл бұрын

Just bought a 3 pack of Donaldson filters. Great reviews!

@michaelanderson3063 Жыл бұрын

Locally I can only buy my filters from the dealer. There are none in the after market other then on line. The dealer are only selling the 2124 at $40 with tax. I am happy to see that it looks to be a better filter and should help in filtering my 013.

@stepfour Жыл бұрын

You can get the motorcraft filter online from 21 -28 bucks... I'm all for supporting your local business... but, not that much.

@magnuseriksson5721 Жыл бұрын

Intersting material in the FL-2124 filter. i think it have longer filter life

@cwtex59 Жыл бұрын

Probably since the media looks different it’s easier to track any potential problems by changing the numbers. Silicone may also be different or at least different color .

@BarnStangz Жыл бұрын

Yo mane, thanks for the video, new filter look pretty legit, I'll have to stock up, got a few years worth of 2051's, but I'll have to get the new style... Also, new boots are looking FRESH as well! 128k subs, keep rippin' baby!

@PowerStrokeTechTalkwARod Жыл бұрын

Ripp rippp

@efaraday4 Жыл бұрын

This 2124 looks exactly like the inside of the black filter that comes on the engine from the factory. Wish I took pictures when I cut it open.

@Uncle_Fester24 Жыл бұрын

Cool video. Your watch is badazz!

@PowerStrokeTechTalkwARod Жыл бұрын

Found it in a movie!

@nysucks4508 Жыл бұрын

Changed my oil last month and my parts dept had the new filters in stock

@nobodyhome2318 Жыл бұрын

Motorcraft baby!👍

@emellina1 Жыл бұрын

Looked identical until you ripped into the Fabric...good comparison.

@PowerStrokeTechTalkwARod Жыл бұрын

Hey budddddy

@vais3 Жыл бұрын

The FL-2124 is a synthetic media and the OG FL-2051S are a closer to a glass or glass enhanced cellulose media. Both do phenomenal for filtration but the synthetic media flows a bit better. These filters should be made by Mann Hummel who bought out both Wix and Purolator. They own a few others as well. Micron rating assumed: 20 micron at 95% or better. It’s possible to be 15 micron but we will see once the literature is released.

@joemolina5215 2 ай бұрын

Just got my oil changed at dealership they put a 2124 oil filter that is why I wanted to watch this video

@blake8346 6 ай бұрын

thanks ARod good video

@adrianspeeder Жыл бұрын

FL-1A and FL-1995 for life!

@billspruce8368 Жыл бұрын

I wonder how these compare to Amsoil filters... I have a three change supply of Amsoil 5w-40 and filters waiting in the wings.

@akbychoice Жыл бұрын

I use a large pipe cutter to open my filters. Couldn’t justify the price of the fancy filter cutters.

@Cotton088 Жыл бұрын

Looks like the Purolator BOSS media to me

@CPsGarage Жыл бұрын

Because they are the supplier

@TJ-qz6hr 2 ай бұрын

I just about had a heart attack after changing the oil in my 6.7. After starting the engine, I just happened to look at the old 2051 filter in the drain pan and the box that the 2124 came in and thought, ohhh sheeeet!!! they gave me the wrong filter!!! I immediately went to a ARod video to see what the deal was? I feel better now.

@PowerStrokeTechTalkwARod 2 ай бұрын

Wheeeew

@pmiller7886 Жыл бұрын

Looks pretty legit, gotta look up the price.

@dirtdiggler1980 6 ай бұрын

Something I’d like to add as I was just at the dealer for my filters and I questioned the number change in which they couldn’t explain lol but the price DOUBLED for us up here in Canada 🇨🇦 new number new price I said… but at least with your video I see they have improved it not sure if it’s double but lmao

@akbychoice Жыл бұрын

Couldn’t get a FoMoCo filter anywhere last oil change, first time using anything else but it is a WIX. Damn thing was 3 times the price of the FoMoCo.

@RayLovesCars Жыл бұрын

Oh hey I was wondering about this as our dealership finally got some more powerstroke filters, we’ve been stocking Balwin filters because of backorder issues up on the north side of the border

@kellyc2425 Жыл бұрын

Perhaps easier to clamp cutting jig to work bench, then use a strap wrench on the filter

@timf6916 Жыл бұрын

Well, my Ford Dealer does mine. IT BETTER NOT be a copy cat.

@xeutoniumnyborg1192 Жыл бұрын

12:10 @ARod My best guess on the numbers on the filter cans is this: (Disclaimer, this is Nyborg's SWAG). First 4 digits is a lot number. Last 5 digits is a sequence number in that filter's production run. Again, just my guess. Good info today!

@PowerStrokeTechTalkwARod Жыл бұрын

Hey thanks bubby

@Jon-O. Жыл бұрын

Looks like the new filter has all Synthetic media which gives higher flow rate and smaller micron rating and can hold more contaminates while maintaining the flow rate. The benefits of synthetic media over paper cellulouse media. Its why I stopped using mopar oil filter on my 6.7 Cummins and use the Fleetguard synthetic media or Amsoil's oil filters.

@louhess6355 Жыл бұрын

Is bigger always better with oil filters? The reason I asked that is Will that fit a 6.2 gasser? Are the threads different? Do the gaskets not match up? I've always liked the idea of running the biggest oil filter I could fit on, more volume of oil the better. Does anyone know why it wouldn't fit.

@zfilmmaker Жыл бұрын

I just found out about this (time to do an oil change)...the 2124 is double the price.

@FollowingtheCliffNotes Жыл бұрын

Look a notification on the same day wow

@jeffburger2782 Жыл бұрын

Ya i did not even get a notice

@FollowingtheCliffNotes Жыл бұрын

@@jeffburger2782 I haven’t been getting all notifications only some

@CPsGarage Жыл бұрын

Your being watched cliffy wiffy

@FollowingtheCliffNotes Жыл бұрын

@@CPsGarage possibly. Need to stop watching F r T videos 😂😂

@MrMan5014 4 ай бұрын

8:03 I was always under the impression the oil went the other way…down through the little holes and to the outside of the pleats and into the centre and back up through the big hole…when mechanics cut the filters open to investigate the source of engine failures, always check the outside of the pleats…maybe this one is different but it doesn’t really make sense…🤔

@georgejacobs3938 Жыл бұрын

What filter wrench do you use and a part number for it

@JeepBigE Жыл бұрын

I still have a couple 2051's left before I make the switch on my 2018.

@mjmohn Жыл бұрын

Will Walmart take them back now as a return if you have your receipt? Great Video. Cheers.

@PowerStrokeTechTalkwARod Жыл бұрын

Not sure

@BlakeReed18 5 ай бұрын

@powerstroketechtalkwarod so would I use the new filter on my 2018 6.7, or stay with the original? In the discription it says for '23 6.7's.

@PowerStrokeTechTalkwARod 5 ай бұрын

The new filter supersedes the old filter

@mike-cl1mm 4 ай бұрын

I think the oil goes the other way ! But I believe the reinforcement in the paper is for 100% synthetic oil Wix has a special designation for synthetic oil filters as do many other brands , Ford maybe has an all in one kind of deal ? Maybe , maybe not ,,,, but I am sure about 5he oil flow deal,,, love the channel

@davidwysocki143 3 ай бұрын

The date code starts with the second digit. The filter in your left hand date is 02-11-22. The right hand filter is 09-15-22. Don't know what the other digits mean, possibly production numbers such as shift, batch, line or run numbers.

@Jewalston 10 ай бұрын

Aaron, What is the part number for the PCCV air oil separator on a 2023 F250 Crew Cab 6.7L. I want to change the one on my 2021.

@PowerStrokeTechTalkwARod 10 ай бұрын

There isnt one

@kingranch8516 Жыл бұрын

Waiting for you to say oh gravity

@Duschbag Жыл бұрын

Just a thought... Remove the silly rubber handle from your "CAT" Can Opener, mount that big ass handle in a good Bench Vise... Now you can use TWO hands to rotate the Filter Housing while adjusting the screw clamp putting pressure on the RIDGE BRAND PIPE CUTTER WHEELS... and you'll open it up in less than a minute... No, I'm not a factory trained mechanic but... I have been selling Industrial Tools for over 43 years. 🙂🇺🇸 I was also a (CMS) Commodity Management Supplier to the St. Louis Ford Assembly Plant for six years. I still have my Licence Plate Frame that was given to me by the Tool Stores Manager that reads "I WORK FOR FORD, I DRIVE A FORD" I have many great memories from my time working with the people at that plant. It manufacturerd The Ford Aerostar Minivans. 😟 Then the Explorer's came out along with Mercury Mountaneer and Lincoln Aviator. All different trim levels on a Explorer frame, suspension, engines and transmissions. Just different interiors and exterior trim. Sorry.... I'll shut up now.

@PowerStrokeTechTalkwARod Жыл бұрын

Thanks buddy, ok u can un shut up now😝😝

@TellTheTruth1 3 ай бұрын

I can see there are more pleats, but how deep do the pleats go? If they don’t go as deep as the first generation oil filter, then there may not be really any difference other than the filter material.

@barrywhitley2535 Жыл бұрын

First time and last time watching this channel. Is this guy really a Ford technician? God help us.

@PowerStrokeTechTalkwARod Жыл бұрын

Cya later ding dong

@aiwseman80 4 ай бұрын

Any chance you'd cut a royal purple 40-2051 open too?

@davidwysocki143 3 ай бұрын

it's not a rubber anti drain back valve...it is a silicone anti drain back valve. It says right on the box above the part number "silicone valve". Also the letter S at the end of the part number means it is a silicone valve filter.

@jkcook626 Жыл бұрын

how does Ford oem 2051 compare to Wix and Fleetgard for quality???

@joemolina5215 2 ай бұрын

Hope it doesn’t put any restrictions on oil pump

@bob_frazier 10 ай бұрын

Does the new (FL2124s) come with the info directly printed on the white metal filter or is it a stick on label? The old (FL2051s) has it's label directly printed on the metal filter, right? Could these be fakes from Amazon?

@DannyDelawder Жыл бұрын

I just got 2 2051s at walmart did not see any 2124

@jmadams75 Жыл бұрын

Off topic. 2022 King Ranch Tremor... My lane keep assist completely disappeared from my dash and I can't get it to come back. I can change settings but i can't get it back up on the display. Anyone else?

@PowerStrokeTechTalkwARod Жыл бұрын

Really??

@jrh4187 Жыл бұрын

😎😳😊😎

@coryjohnson3946 Жыл бұрын

Caaaaaan you say….purolator !😂

@CPsGarage Жыл бұрын

Yup they are 100% sure the supplier

@g-man2228 Жыл бұрын

Sooo, longer oil life, or no?!? 👊🏻

@PowerStrokeTechTalkwARod Жыл бұрын

Nooooo

@gorbyagusta7076 Жыл бұрын

You got the flow direction wrong.

@TonyBenton0728 Жыл бұрын

I am using the K&N HP 4005 10 mc now over the 20 mc Motorcraft . The last Ford mechanic didn’t remove the old gasket and put the new filter on top of the old gasket leaked like crazy. Am I correct the Motorcraft filter is 20 mc ?

@CarlosRodriguez-hb3vq Жыл бұрын

I’m always flabbergasted when people double gasket. I mean yeah, maybe my incompetent neighbor did it, but it should never happen to someone who changes oil filters for a living

@kendavis1198 Жыл бұрын

AMSOIL FILTER In a FORD Canister??? How Much was that BABY???

@Go2Sleep911 Жыл бұрын

My question would be is using the 2051 ok i still have a few around. Will warranty work be denied if using the old filter? I mean it shouldn’t with the magnuson moss act, but I Got a free Amsoil eo98 with my was oil order so was going to us that one up.

@TellTheTruth1 Жыл бұрын

It’s more like a pipe cutter been a can opener. Just saying.

@akbychoice Жыл бұрын

I use a pipe cutter.

@williamsantiago7303 Жыл бұрын

That glue job looks cheap. Did the country of manufacture change?

@PowerStrokeTechTalkwARod Жыл бұрын

🤷‍♂️

@logangaskins9003 Жыл бұрын

Outside of a simple answer like “use the oem” Is a cat filter better than a motorcraft? I’d Love to run cat filters

@akbychoice Жыл бұрын

I thought I saw where A-rod was running a Donaldson Filter.

@PowerStrokeTechTalkwARod Жыл бұрын

Fuel

@DesertJeff 7 ай бұрын

Instead of eight holes, they now have five elongated holes

@ryanfriedrich7202 Жыл бұрын

Amsoil my choice over all of these bottom metal flat spring in these is horrible

@jimmyaber5920 Жыл бұрын

Does this new oil filter make CP4.2 pumps last?

@PowerStrokeTechTalkwARod Жыл бұрын

🐠🐠

@davidmills4346 Жыл бұрын

AMSOIL Bypass

@PowerStrokeTechTalkwARod Жыл бұрын

I gave mine away

@scha0786 Жыл бұрын

Come on son, get some micrometers to give some science to it

@PowerStrokeTechTalkwARod Жыл бұрын

Sorry i failed science class, but bill nye might know

@717weston2 Жыл бұрын

I stock a lot of the filters for 6.7 but I buy from Ford dealer probably counterfeit 😊

@rbhe357 6 ай бұрын

The new model is so much more exactly the same .

@MHolt-yq5vg 6 күн бұрын

The higher the CEO and management pay the lower product quality there seems to be.

@jamesplotkin4674 Жыл бұрын

I clicked away after he said the oil flows from the middle to the outside. Before that, he was uncertain of the anti-drainback valve. Nope.

@matthewyates3230 Жыл бұрын

I just did my oil change today and last night kinda just found out they had a replacement filter. Actually relieved you did a video on it because I wasnt sure if I was retarded and put the wrong filter on my truck. : p