Yeah, I need one of those in my life now. I think one of my brothers in law got one recently and has been running it non stop until a YM trip this week.

I bought mine for 160 used straight from elegoo, and they have been even cheaper since then a few times. I’m completely new to the hobby, and I’m pretty sure any issues I’ve had have been related to my own ignorance, generally with trying to print very different filaments with the same slicer settings. It’s an amazing printer so far, even with the tinkering, learning, etc. I also got two used Neptune 3 pros for under 100 each, and they are about half the speed with very similar print quality, but they’re nearly silent.

Hey new subscriber here and new owner of the Neptune 4 plus. Just wanted to mention that I'm also getting that squeek and can't seem to find it. So please let me know if you do. And some bonus info for anyone one looking to pick this up, when the bed recognizes the temp has reached 60c it hasn't actual done so completely for the entire bed. So I give it 15 minutes to preheat before even leveling to compensate for thermal expansion otherwise you'll find different results leveling everytime.

LMAH! Lol "Llama" awesome can't wait see that channel grow and this one to continue to grow!

Im pulling the trigger this week! I get to buy my first 3d printer!!! I cant wait! Just had a room open and im going to split it with the wife as office space her work and my printing hobby/ electronics!!!

Dude omg you were talking my language with the old tech. I remember assembling my first computer solo and it was a 486 DX2-66 and i had to do the manual cpu switches LOL. I thought I was such a power user!

Love Elegoo filament. My first PC was a 8088 with 768 bytes of memory (yes, bytes). That was 256 bytes of extended memory with 512 bytes standard (or 640 standard with 128 extended.. many moons ago).

Trade Wars 2002! That was my jam back in the day.

Incredible ! i just bought this printer and im waiting for its arrival and this video comes out ! perfect timing !

Enjoying my 4 Plus. None of the issues others have reported. I use the Elegoo version of Cura for regular prints, and S3D with a 4 Plus profile for Lithophanes. I've only had the printer for a few weeks so it's not fully tuned, but it's very quickly almost as tuned as well as my older X1.

Great vid LM

😊Thanks for sharing your honest experience. Maybe an addition to my collection!! ❤

Subscribed to the second channel and notifications are turned on, looking forward to the new content!

This is the one i reccomended to my friend last week, he got it and loves it!

I like the CRT being the overhead. Really cool!

Oh, Wildcat BBS! I ran a 2 line BBS on that in the early 90's.

I am stuck. Trying to decide between this printer and the Sidewinder 4x Plus. They seem very alike. What I am wondering how the noiselevels are on those two compared ?

Dude you're talking my language - CRTs are the best way to appreciate retro gaming

3 year old filament still good to print right away after being out in the open is great but there’s a lot of filament that you could buy now that you would never be able to use 1 year…QC needs to be a thing again

❤❤❤ I love it lm

I sold mine. It's just to inconstant. It took 2 firmware upgrades to even make it usable. It's awesome you got great prints off your's. Ultimately I got a Kobra 2 Plus.I'm pretty happy with that machine.

great video. been looking at this printer too. you didnt mention it but im assuming this would be considered a helmet printing kind of printer

That price is killer!

I printed out a version of the mushroom that wasn’t nearly that big (even accounting for the extra 33%)… on my SV05 the spots did not fit in the spots on the lid… I tried resizing them the best I could but it never really worked. When I got my P1S, I reprinted it and everything fit perfectly. The spots still don’t make a ton of contact with the indents in the lid but I used enough glue to get you high lmao… I really need to get some 3D Gloop!; I hate using super glue 🤣🤣🤣

just ordered mine :)

Hey I was wondering if you’d recommend buying the creality ke or the Neptune 4 plus. I could get either but I’m not sure if the ke would be better for more precise and articulated parts which I’d be interested in.

Thanks for the video. This helped me decide on trying an elegoo Neptune 4 max series printer. Question is. Once I get the printer connected to the local network/wifi. How do I get to klipper?

You should have done a small comparison with Sidewinder X4 Plus! I'm stuck deciding between the two. They are so similar. Regardless of this, thanks for making great reviews and other informational videos, I've spent the last 4 nights watching them :D

Can you do a comparison with this Nepune4+ and the Artillery SW-4+? They seem similar in price range currently.. comparatively the SW-4+ has X/Y linear rails but I hear it has some FW issues (not keeping Z-offset), Neptune4+ has accelerometer and Elegoo seems to be much better overall in terms of QC and customer support. Since you have experience with both, what are your thoughts? Which would you be more likely to keep/use if you had to pick? I'm thinking about getting a second printer to upgrade from my Ender3v2.. I'd love the bigger volume and Klipper. Just need some help deciding.

Sooooo..... How big of a TPU o-ring can you print on that thing? 😆 Great content as always Loyal!

I have never had power loss recovery work for me, and I have heard of it creating more issues than it solves. Just get a UPS.

Just looked the Plus printer up as Elegoo are having a Sale on, this printer is now £283.99p on the UK site. ( need to save up I guess as bills come 1st sadly ) I really wish to get it to replace two other 3D printers I am now going to dismantle due to them being a pain to use even after I spent time and money upgrading them! ( Aquila G32 chip model now upgraded with dual lead rods and motors & PEI bed & all metal hot end = 550 C max but used at 300 C ) and the ( FLSUN QQ-S Pro Delta Printer also PEI bed upgraded & fitted a Titan Extruder ) No end of issues with both f them no matter the work done? I have a Elegoo Neptune 3 and the Elegoo Neptune 3 Max, the Neptune 3 hot end throat needed replacing ( just got the bi-metal throats now ) The Neptune 3 Max just being a swine as it worked great for ages and now will not do leveling right even after tons of manual and auto leveling done and I getting upset with the time I put in only to have it still not level enough to print right? I have now the BTT Pad 7, I wish to klipper both Neptune 3's But being new to klipper I can't find a video step by step to set up both of them on to the pad 7 klipper control? Anyone know of a help video clearly showing how to do these two Neptune Printers in to klipper by the Pad 7? Maybe then I can get them working better and faster? I having to only do fast printing on the new Qidi X-Plus-3 Printer I have now. I done the hobby for 5 years now but still not able to do all the g-coding and klipper stuff yet?

Make a 486 DX4 100 and you could use the CPU to heat the bead on a 3d printer ;) Does days where crasy.

It's a bit late, but happy MAR10 Day!

I have the machine and I like it, but it is difficult to get the bed perfectly leveled. If only this machine had auto nozzle height adjust!

The cigarette TV lives!

hey it´s a nice coincidence :D I´ve just bought a 3D printer and printed this exact mushroom. I also wanted a bigger version of it and just scaled it 30% bigger. The dots didn´t fit into the head and the head didn´t fit onto the bottom part... So how did you actually scale it? Would be really nice to know for a beginner :) Thank you for the video!

Awesome looking printer and some pretty nice features for the price point. What score did you end up giving it using your system?

Maybe if Loyal eats that super mushroom he'll become a big boy!🤣 If you don't understand that joke, come join us Monday, Wednesday, and Friday at 5:00 PM Pacific (8:00 Eastern) on Twitch for the LM Show!

Don't you ever worry about running out of filament??

"Little" Mario Mushroom. Lol.

It's getting to the point where upgrading older machine is more expensive than buy ones with all the Klipper features are on them. Makes the newer model much more "Starter" friendly.

Can it heat portions of the bed for small objects? ( same Q for the larger printers on the market if you know) Subscribed to the new channel 👍🏻

Oh my gosh!!! I want that mario head!! Did you create it, or could you share the location of the file please @Loyal Moses

Thanks for the video. Question - Can you tell the print speed in mm cube/ sec? Also I have always used Marlin based printers. This being Klipper machine, does it need Klipper skills to calibrate the m/c or work with it in general? I am just not sure where and how much Klipper I need to learn. Thanks again

That's a very cool video, thanks for that! I'm actually looking for buying a "helmet class" 3D printer. And I was going to buy a Anycubic Kobra 2 Max, but then I learned about the software and all about that to use Wifi you need to use the phone app and thing like that. And I know it's gonna bugs me ... The way you explain the workflow in this video, "plug the RJ45, Put the IP in the software an boom, launch the print right from you slicer from you PC", is what I want. So do you know if there is way to do that with a Kobra 2? Or is ther other machines about the same size or bigger, with same quality, same price range, but LAN/Wifi connected and easy to use like that? And did you tried the Elegoo Neptune 4 Max and the Anycubic Kobra 2 Max? I looked for but didn't find any video on those two on your channel. I'd love to hear your thoughts on these two machines. Anyway, thanks again for all you videos, very helpful!

How did you get this printer to work? I got one decent print out of it and everything since then gets shredded after the first layer, genuinely don't know what to do with it anymore.

Quick question have you reviewed the anycubic cobra 2 plus and which machine do you think is better that or neptune for a beginner?

So as of right now both Elegoo Neptune 4 plus and artillery sidewinder x4 plus are both $350 between the 2 which is better?

I want one. Lol

Your video must be the reason Gloop is sold out everywhere until at least mid April. lol

Please can you share your TPU profile !!! I hate how big names paywall there profiles

what size is that mushroom?

Where can I buy the gloop glue from?

why aren't those spots designed to snap in?

how fast does gloop cures ?

I was so enthusiastic to buy this printer model. After a month of use all hell begun... After a blob of death everything went pear shaped. I've got the replacement print head no doubt, but the next one couple of days later... I was so angry, I've just throw it to the bin... No replacement from this company. Since the installation and re-levelling of the latest pre-assembled extruder kit I was not able to print a single usable piece. As the latest repeated fails, I've checked the bed temp and found that: it is all over the place and some parts even 10C degree lower than the set level. I wasted countless hours and countless filament reels with this junk of a printer. Not happy at all! Wouldn't ever buy another elegoo in any shape or form.

The 385mm height is so annoying. I have so many models that I designed to work at exactly 400mm (like the industry standard has been for large format).

404 page not found

The electric noise from the CRT is giving me a headache!