Lowest Revving Diesel Engines

Рет қаралды 249,280

Күн бұрын

Diesels themselves run at low revs, but what about those with the lowest redline amongst all,
- Chapter -
00:00 Intro
0:37 Detroit Diesel 12V-71
1:46 Kharkiv Model V-2
2:35 Napier Deltic
3:36 EMD 16-645
4:55 Kelvin K2
5:58 Lanz Bulldog
7:00 MAN B&W 6S50MC
- Disclaimer -
This video is fair use under U.S. copyright law because it is transformative in nature, uses no more of the original than necessary and has no negative effect on the market for the original work.
- Credits -
“V12 Detroit diesel 12v92 twin turbo cold start” by car2069
• V12 Detroit diesel 12v...
“DETROIT DIESEL 12V71TT TWIN TURBO 12V71 V12” by OldForgePower
• DETROIT DIESEL 12V71TT...
“Detroit Diesel 12v71 Cold Start and Rev” by Johndeere 100
• Detroit Diesel 12v71 C...
“12V71 Detroit KW Road Train. Hear this baby sing” by Phil Dixon
• 12V71 Detroit KW Road ...
“t34 start 1” by Admiral
• t34 start 1
“Russian V-12 Diesel Tank Engine Part 1” by Johan Christersson
• Russian V-12 Diesel Ta...
“The REAL SOUND of T-34-85 TANK” by Urbex Polska
• The Sound of T-34-85 Tank
“T-34-85 sound recording by Pole Position Production” by Pole Position Production
• T-34-85 Tank Sound Rec...
“Napier Deltic engines arrive at the Anson Engine Museum” by TANISLA2
• Napier Deltic engines ...
“NAPIER DELTIC ENGINE” by DEAN WATERS
• NAPIER DELTIC ENGINE
“Baby Deltic engine start after revised coolant system installed” by napierhero
• Baby Deltic engine sta...
“Five Deltic Convoy Passes Stalybridge 11th October 2011” by Phil6219
• Five Deltic Convoy Pas...
“EMD 16-645-E6 diesel engine in Port Lavaca, Texas” by ken444444
• EMD 16-645-E6 diesel e...
“HD: NS SD40E EMD 645 Start Up” by Stall Five Productions
• HD: NS SD40E EMD 645 S...
“The Sounds of the EMD 645 Diesel Engine: Start Up, Idling, And Notch 8!” by WATWAREHD
• The Sounds of the EMD ...
“B&P Butler shops SD40-3 in notch 8 ! !” by B83024
• B&P Butler shops SD40-...
“1942 K2 Kelvin Engine. 8 1/4 Litre - 2 Cylinders.” by Jeff Otton
• 1942 K2 Kelvin Engine....
“Engine Restoration Sumburgh” by Shetland Amenity Trust
• Engine Restoration Sum...
“Kelvin 'K2' Petrol/Diesel engine, First Run 10/2/2015” by TANISLA2
• Kelvin 'K2' Petrol/Die...
“Kelvin K2 Sounds” by Steve Lalonde
• Kelvin K2 Sounds
“lanz bulldog start after 40 years” by Julien Jansen
• lanz bulldog start aft...
“Lanz Bulldog 45PS zieht LKW” by Lanzniggl
• Lanz Bulldog 45PS zieh...
“Lanz Bulldog D9511/9506, verkauft/sold/vendu” by derLanzmannheim
• Lanz Bulldog D9511/950...
“Lanz Bulldog D8506” by Robin 1994
• Lanz Bulldog D8506
“11,640 HP Man B&W 6S50MC. Baby Big diesel running” by Steam Guy
• 11,640 HP Man B&W 6S50...
“Diesel MAN S 50 MC” by freitaucher
• Diesel MAN S 50 MC
“Try engine Hitachi Man B & W” by jhon'fery Sinaga
• Try engine Hitachi Man...
“MAN B&W S50MC-C ÇALIŞTIRMA ANI” by Murat Öztürk
• MAN B&W S50MC-C ÇALIŞT...

Пікірлер: 599

@oneilphinn6370 3 жыл бұрын

I respect this guy for what he is doing a hundred percent

@VisioRacer 3 жыл бұрын

My pleasure!

@gaiaartemis 3 жыл бұрын

Visio really is the goat

@burroaks7 3 жыл бұрын

@@VisioRacer kzfaq.info/get/bejne/jdaCnLimnsm8f6c.html kzfaq.info/get/bejne/iatjfrSWx93XpqM.html check em out I think you will find them interesting

@perrygoldstein2217 3 жыл бұрын

Giving the lost specs that we all look 👀 for

@alternativeperception6949 3 жыл бұрын

I agree he's VERY VERY good at making these high quality and informative videos

@cake6420 3 жыл бұрын

Visioracer exists and my depression is no more.

@VisioRacer 3 жыл бұрын

Happy to help!

@Chappomusic 3 жыл бұрын

Wait untill you see his OnlyFans page -:)

@beaterbikechannel2538 3 жыл бұрын

He's here to lighten our sunday evenings up. That cutaway Deltic engine is in York Railway Museum UK.

@evanjones2539 3 жыл бұрын

This guy takes footage from other KZfaqrs and makes money out of them.... I am glad I use an adblocker...

@darianzielinsky5912 3 жыл бұрын

@@evanjones2539 lmao that's what every reaction and review channel does.

@GhostOfDamned 3 жыл бұрын

I know right

@9139reg 3 жыл бұрын

The Deltic engines were also used in the "Ton " class minesweepers and mine hunters

@willrussell2134 2 жыл бұрын

The funny thing is it's featured here as one of the lowest revving diesel engines, but in railway terms its renowned for being one of the highest.

@LukeEdward 3 жыл бұрын

They may smoke like a son-of-a-buck, but you can’t deny those Detroit diesels sound great when warmed up!

@joeyknight8272 3 жыл бұрын

They do sound wonderful

@CheekiScrubb 3 жыл бұрын

the sound they make is music

@BlackJack-pf8kd 3 жыл бұрын

My only complaint about them is the unnerving feeling of it becoming a runaway diesel

@HeyItsJonny 3 жыл бұрын

Yes, they do sound great. I drive a Series 60 12.7L every day.

@ricknelson7824 3 жыл бұрын

If you ever ran a screaming Jimmy you can appreciate a well tuned cat or Cummins. The Detroit engines use fuel at ridiculous rates and fall off the torque curve like a rock. They do run under almost any condition and leak a lot. I will keep my k19 engines and let those Jimmy lovers extol their virtues.

@joshbobst1629 3 жыл бұрын

The opposed piston engine he mentions at 3:30 is a crazy efficient design, mostly because it doesn't lose a lot of heat through the head, because it doesn't have one. They have other huge advantages as well. The crank throw of each piston in a set can be way oversquare, that is, the bore is much larger than the stroke, but since there are two pistons racing away from each other in the cylinder, the effect is of a very long stroke. This means you can get the torque of a long stroking engine, with the higher revving ability of a short stroke. This also means plenty of room to completely burn the fuel. Other major advantages are no head gaskets to blow and no valve train. Although Fairbanks-Morse still makes some monster examples for Navy ships, they mostly went out of fashion in the 1970s because they are all two stroke engines, and it was quite difficult to get their mechanical injection to play nice with emissions regulations. Achates power looks to revitalize the type with computer designed harmonic balancing of exhaust pulses to more completely scavenge exhaust gases. They report 55% efficiencies with their prototype, which means 270 hp from their 2.7 litre three cylinder. kzfaq.info/get/bejne/i6xlnZR126mdZWg.html

@lukes2219 Жыл бұрын

This man engines

@LatvianVideo 3 жыл бұрын

Imagine one of those 2000L engines throwing a rod

@falconflylow 3 жыл бұрын

Would probobly sink the ship o.O

@wyattrichardson6237 3 жыл бұрын

I imagine it would be like a small nuclear warhead going off in the engine room

@Weissherz 3 жыл бұрын

there are ~30000L versions of man engines think about those and i've seen inside of those engines a piston is as heavy as a tank

@JunkFriend2 3 жыл бұрын

One of my teachers used to work as a marine engineer on a ship. They had a marine diesel throw a rod. To make the engine not try to use its power to work the broken cylinder, they filled the cylinder with concrete and went on with their job.

@bozhijs4205 3 жыл бұрын

Tad ir ļoti ļoti bēdīgi 😁

@donellmuniz590 3 жыл бұрын

My dad drove an off-highway Kenworth log truck, a 300,000 lb triple, in the 1970s, with a 600hp 12V-71. No diesel sounds as awesome as an old Detroit.

@mrstr8pipes 3 жыл бұрын

You will be known as the 1 who taught us about engines, on KZfaq. #1

@muaythai193 3 жыл бұрын

Him and William Moser are absolute legends on YT.

@flyingdutchman4794 2 жыл бұрын

A couple of things: 1a. I worked for an International Harvester dealership as a kid - IHC designed a whole truck series, the Transtar 4370, so that the Detroit 12V71 and 12V92 engines would fit on the frame and under the hood. They'd install a 16V71 if you didn't mind having the ass-end of the engine inside the cab with you. 1b. 1:40 Good to see the Australians gettin' their boots stuck in! 2. 1:55 The Kharkiv diesel was part of what made the Soviet T-34 the best battle tank of WW2. The irony is that us Yanks could have had our own version of this superb machine, had the US Army not been knackered by Not-Invented-Here Syndrome. Great videos mate; I subscribed and keep up the excellent work. Greetings from the States!

@16jan1986 3 жыл бұрын

I sail on a ship that has the new camless B&W 7G60ME-C9 a twostroke with at redline of 97rpm and delivers 17000Kw

@Thomas_Bergel 3 жыл бұрын

Will it find in my honda yo?

@kaptein1247 3 жыл бұрын

97 rpm?

@thatonescrambler 3 жыл бұрын

6 digits in torque

@16jan1986 3 жыл бұрын

@@kaptein1247 yes 97rpm is max you can actually see each individual cylinder moving under the strain of combustion

@doobielew5439 3 жыл бұрын

It would be amazing to see that engine running

@goralAdrian 3 жыл бұрын

About copies of Lanz Bulldog - in Poland we have Ursus C45. Behind that tractor we have fun history. After World War II Polish goverment want to show tractor made in Poland in 1st may parade in Warsaw - 1st may in Poland is Święto Pracy, it's polish version of Workers' Day. They take Land Bulldog, examine tractor, and make some copy of vehicle with Ursus logotype. After this all tractors hits the road to Warsaw to be presented as a new machine for farmers. On parade people seen one tractor, because another machines broke down during the trip to Warsaw. Some people to today said that tractor was Lanz Bulldog with painted Usrus logotype.

@everythingtractors9332 3 жыл бұрын

Also Hanomag tractors

@ahoorakia 3 жыл бұрын

If the parts are interchangeable ,then they are the same!

@michaelr9285 3 жыл бұрын

It's great how your channel has evolved, clearly one of my favorite channels on KZfaq. Stay safe 👍

@cluricaun78 3 жыл бұрын

really digging the sounds of these engines. Thanks for another amazing episode VisioRacer!

@VisioRacer 3 жыл бұрын

My pleasure

@srcobra50 3 жыл бұрын

Hey Vizio did you know that the bulldog tractor can run at zero rpm? There’s a video out there showing it turn back and forth making it literally run at zero rpm. Enjoy your videos keep up the great work been watching for years

@VisioRacer 3 жыл бұрын

I have seen it, yes. Thanks btw!

@osnariderz5075 3 жыл бұрын

@@jzxtrd337 all engines can run backwards

@Schadenmaster 2 жыл бұрын

4 strokes can't

@samuellindstrom2137 2 жыл бұрын

@@osnariderz5075 I'm sorry but not all engines can't run backwards. Especially most 4-strokes with timing belt or chains.

@wildman510 2 жыл бұрын

Most hotbulb engines can do that I think.

@eliaslundstedt5607 3 жыл бұрын

Ah yes the Deltic Diesel, a very cool engine

@1210MIKES 3 жыл бұрын

One o my favourite and intercity 125 ✌🏻❤️

@stevie-ray2020 3 жыл бұрын

The English Model-Engineer Magazine (a fortnightly publication) ran a series of articles in the 1980's detailing how to machine & build a scale working model of the Napier Deltic engine. Was quite keen to make one, but unfortunately I recognised that it was beyond the capabilities of my skills, & my very small lathe!

@eliaslundstedt5607 3 жыл бұрын

@@stevie-ray2020 wow that would have been a really cool piece if you did make it

@stevie-ray2020 3 жыл бұрын

@@eliaslundstedt5607 I remember seeing pics of some of the readers' finished Deltic models, but what I can't remember is which fuel the model what designed to run on (diesel, petrol, or alcohol)!

@Genius_at_Work 3 жыл бұрын

@@stevie-ray2020 A real Diesel on that small Scale would be borderline impossible; I can't imagine DIYing my own miniature Fuel Pumps and Injectors. Fabricating every other Part sounds flimsy, but possible so Petrol or Alcohol should be fine.

@aaronburratwood.6957 3 жыл бұрын

I’m so ignorant about engines from around the world. Some really great examples of ingenuity from older to new and marine diesels too. 👍🏽

@kimmer6 3 жыл бұрын

We used to use a twin turbo Detroit Diesel V12-71 as a starter motor on General Electric Frame 5 and Frame 6 gas turbine generator sets of 24 Megawatt to 32 Megawatt output. The 12-71 would fire up and idle for a few seconds, then accelerate to wide open full power for the next 10+ minutes. It drove a Twin Disk torque converter which turned the accessory gear box. That was coupled to the gas turbine by a jaw clutch. The screaming Detroit would crank the gas turbine to 20% speed where it lit off. The diesel would help accelerate the gas turbine up past 60% speed and then disengage. It would idle for a minute then shut off. That was about 12 minutes of Detroit Diesel engine abuse every time you needed to start up the gas turbine generator. They were very reliable. Ours were rated 600 horsepower.

@donellmuniz590 3 жыл бұрын

Wow!

@alternator7893 3 жыл бұрын

2:36 those multi crankshaft opposed piston engines (not to be confused with boxer or flat engines) can reach a thermal efficiency of over 50% making them some of the most efficient internal combustion engines in the world, however they are extremely hard to repair

@rbagel55 3 жыл бұрын

You know your engines well. I must admit, I have learned a lot by watching your videos. So I had to subscribe

@MONTYRAMONES 3 жыл бұрын

I don't know why the starter of this engines mesmerize me, makes me relax, even my wife don't understand why I see this videos to get asleep, awesome material as always

@parkerkowens 3 жыл бұрын

Thank you for the quality videos Sam!

@VisioRacer 3 жыл бұрын

I thank you!

@judgejimbobrowntown7600 3 жыл бұрын

I love the sound of the bi directional train motor

@donellmuniz590 3 жыл бұрын

An engine that goes both ways? How very 21st Century of him/her/it! 🤣

@RatFabTacoma 3 жыл бұрын

one of my favorite channels for a long long time

@ChrisDIYerOklahoma 3 жыл бұрын

Greetings from Oklahoma! -- great videos (as always!). Keep up the awesome work and thank you for making videos on all these engines. Fascinating!

@LooseDeuce 3 жыл бұрын

Haven't seen your videos in a while, but you've grown so much since and your English is so good now! keep it coming! Hope to see the GM 4.3L Vortec featured one day.

@davidpeters6536 3 жыл бұрын

Another cracking video. Thanks. The Deltic, I can't wait for the dedicated video.

@elekl4621 3 жыл бұрын

Is this a new intro? I like it. Good work as always, the week isn't complete without a video od yours. Thank you.

@fpscanada3862 3 жыл бұрын

Hey man i respect you for learning good enough English to make this video and being confident enough to use your english even with your accent. great video!

@wizrox 3 жыл бұрын

Super, skvělý a přesně takhle jsem to myslel v tom minulém komentáři. Fakt klobouk dolů za to, co děláš a jak to děláš.

@carlarthur4442 3 жыл бұрын

Remember when I worked on British Rail , I was a Signalman , and used to get a lift off the drivers on those Diesel engine the power was awesome they used to go forever , brilliant video. thanks 🙏

@FilterYT 3 жыл бұрын

Thanks VisioRacer, another very well researched video.

@johnnytarponds9292 3 жыл бұрын

Loved this one! Lots of rarely seen stuff.

@donkmeister 3 жыл бұрын

Love this! Just a point about the superchargers on the 2-strokes, the supercharger is not there for power-boosting purposes but rather to help flush out the exhaust gases from the cylinder at the bottom of the stroke. This needs to happen from idle speeds, hence why they use a supercharger rather than a turbo for this purpose. Adding turbocharging then boosts power. You'll hear this use of a supercharger/blower referred to as "exhaust scavenging", and on some engines they use an electric blower instead.

@eugeneoreilly9356 3 жыл бұрын

Correct,I was trying to explain that to somebody else on here.Last off the Detroit's were the 92 series.Always remember that sound as here in Ireland our capital city's bus fleet were powered by them up to end off 80,s.

@DaInfector 3 жыл бұрын

Glad you continue to make videos, good job man

@HaraldOnTheRocks 3 жыл бұрын

keep up the good work, Sir!

@chompette_ 3 жыл бұрын

One slight thing worth mentioning is the deltic engine at 3:10 is a turbocharged 9 cylinder version used for small single engine locomotives, the 18 cylinder supercharged engine that was used in pairs in the famous class 55 sounds much more impressive, as shown in the clip following

@peterthepilot4413 2 жыл бұрын

Excellent I’ve seen engines that I’d never encountered!

@Mikehoncho191 3 жыл бұрын

I love how every time I wonder about something, my main man Visio uploads a video on it😂😁 love the vids man keep it up👍

@kristopher2263 3 жыл бұрын

Been watching for a long time, first time I’ve ever seen you! Lol. I love your content!!

@damnthiccassboye7138 3 жыл бұрын

Can we just say how his voice is so satisfying, good job bro👍👍👍👌

@mkai8978 3 жыл бұрын

Love you channel. Thank you, 🇲🇾

@fredzephire4071 3 жыл бұрын

You have been producing these very informative vids for quite a while now and i love your content, i'm not sure of your back ground but i'm getting used to your accent ( hell i have trouble with English and i'm Australian lol). Please keep up the good work, i love your enthusiasm.

@VisioRacer 3 жыл бұрын

I am a Slav, from Slovakia ✌🏻 Thank you

@grahamnutt8958 3 жыл бұрын

@2:35....... The good old Deltic was a very familiar sight in 1970's 🇬🇧. I used to live near a main railway line and it was in very close proximity to a coal fired power station...... The Deltic "throb" was distinctive to say the least. OMG.... showing my age here lol 😆. Thanks for the upload VR 👍👍

@YotaLC-wo6qf 3 жыл бұрын

VisioRacer, not the channel we asked for, but the channel we never knew we needed.

@tymac3306 3 жыл бұрын

Love your videos Mr.Racer, lol

@naveedakhtar4133 3 жыл бұрын

Nice research into specific type of engine

@EYVOAuto 3 жыл бұрын

Crazy, I can't believe how big and powerful some of those engines are!

@waynewatts-ellson61 3 жыл бұрын

Hi visioracer I have been watching your videos for a long time now. Always enjoyed your content keep it coming it's nice to see the face behind the voice as well! Greetings from the United kingdom

@szymon6207 Жыл бұрын

C360 2200RPM SPEED 26 KMH ONLY

@chriswilson2431 3 жыл бұрын

Great to have someone young interested in old engines. Also, helps he’s so bloody gorgeous!

@simsum1argh882 2 жыл бұрын

I love these videos.

@jamesburke9651 3 жыл бұрын

Your videos are really great. :))

@greatkingrat 2 жыл бұрын

I really like this “face reveal” format. It seems more professional. I’ve been a fan for ages. Keep up the awesome work and the amazing research.

@bill84 3 жыл бұрын

I liked this, good work

@nicolasbiette5573 3 жыл бұрын

Great research, very Nice and instructive vidéo,continue 👍🤟🤙💪🏍🏍

@larryadams8432 3 жыл бұрын

I enjoy your videos very much,

@nickthompson9697 3 жыл бұрын

Bulldog is one of my favorite tractors.

@justan0therdude 3 жыл бұрын

Hi there from Germany :-) You make great Videos, i always enjoy them, even the Outro Sound is great. Keep up the good Work! You've made a Video about Engines, that are not reliable and schould not be buyed. I was wondering if you could say something about the PSA DT20C Engine? Cheers ;-)

@VisioRacer 3 жыл бұрын

Thank you very much, I appreciate your support! About the engine - I do not know much about it, I would have to research it.

@gerardfoo7336 2 жыл бұрын

Thank you for the well presented informative vidio.

@KingBanter 3 жыл бұрын

My buddy has just installed an EMD 16-645 In his Civic Type R. Savage performance

@stuforty2 6 күн бұрын

Very interesting video 👍

@bloodreno 2 жыл бұрын

Bruhhhh I’ve been watching your videos for quite a long time and this whole time I thought I had subbed 🤦🏻‍♂️ sorry for the late sub and please keep making videos!

@nicholasprocknow9885 3 жыл бұрын

That cab over at the beginning sounded sick

@michaelbenoit248 3 жыл бұрын

I see tons of videos on gas engines, finally something on the diesels.

@quirkyMakes 3 жыл бұрын

I would love to see and hear some of those giant marine engines. Love seeing all the different engine designs out there.

@domminion599 3 жыл бұрын

Borat explains diesel power!😂 Veri nice!

@wilcofaber9863 3 жыл бұрын

Emd 645 brings good memories. A beast of an engine.

@16bcivic 3 жыл бұрын

Deltic sounds awesome!

@madmax2069 3 жыл бұрын

As do most 2 stroke diesel engines.

@XMarkxyz 3 жыл бұрын

Nice, interesting collection of engines; I think the Super Landini tractor with an engine similar to the Lanz is a little lower revving at 620 but the most courious thing is it can still run making only half a turn, it's called "mezzo giro", and you can even reverse the engine rotation, but to start it you have to be brave enough to turn with your hands the flywheel

@danielcastaneda7801 3 жыл бұрын

Is this a face reveal?? You look exactly how I thought you would haha keep on with these videos! Been loving them for years

@michaelmarchei8539 3 жыл бұрын

I always knew Visio would look like this without ever seeing him LOL. Cool Dude 👊

@DsBt256 3 жыл бұрын

0:23, yes the known eastern european way of starting diesel engines.

@youneverknow111 3 жыл бұрын

i never used it on any machine i have,if cant start without it something is wrong

@shuenshuen 3 жыл бұрын

@@youneverknow111 when tuning the engine first start or when its really cold i spray a bit of brake cleaner in my intake on my mopeds. Gets it started way easier and once it runs I kind of have an idea how I should tune the carb (main jet mostly)

@kaptein1247 3 жыл бұрын

western europe too

@youneverknow111 3 жыл бұрын

@@shuenshuen i understand its for easier starting,but like mechanic i been teached if it dont start on its own something is wrong,

@shuenshuen 3 жыл бұрын

@@youneverknow111 this is often true, however its not a large problem when working on 2 stroke mopeds 50-74cc. They sometimes just need a little bump to get going. Especially because I mix my own gas with 2 stroke oil before putting it in the tank, so when I haven't started the ped in a while the oil will start sinking to the bottom, making it harder to start. Brake cleaner perfectly fixes that as its kind of the opposite of oil.

@BenyoXD 3 жыл бұрын

nice new intro PS: haven´t been here for a while

@tijnsnijders 3 жыл бұрын

Seen many of your vids, funny to see the face behind the voice!

@VisioRacer 3 жыл бұрын

Funny in a good way? 😄

@1210MIKES 3 жыл бұрын

Awesome 👏🏻 ✌🏻

@manuelweiss3904 3 жыл бұрын

I love the sound of the Lanz tractor.

@HATECELL 3 жыл бұрын

Those Lanz Bulldog are very special. Instead of a reverse gear you can let the engine run backwards, and you need to heat them up for them to run. If you let them idle for too long, or drive downhill for too long, the engine will cut out because it gets too cold to ignite the fuel. But due to their low compression ration and simple fuel system you can run them on pretty much anything that burns. They're the OG multifuel engines

@eliaslundstedt5607 3 жыл бұрын

Ah yes, the heart of the SD40-2, the EMD V16 645

@thegeforce6625 3 жыл бұрын

Can’t forget the 567 and 710’s too :D

@Tractors101 3 жыл бұрын

The SD40-2 is such a common and yet classic machine

@eliaslundstedt5607 3 жыл бұрын

@@Tractors101 Yeah, I wish I could come over to america for just that reason, and some history sightseeing and museum touring. I would also like to go to Florida to visit the best private air museum, Fantasy of flight

@truckinman86 3 жыл бұрын

Fun fact: the 8v71 is almost the same total displacement in cubic inches as one cylinder of the EMD 567, the difference is only .45 cubic inches.

@hamidsherzad2004 3 жыл бұрын

yeah we support you my dear

@780brando 3 жыл бұрын

love these

@belgian_i30n 3 жыл бұрын

Okay but how about the HIGHEST revving diesels hm?

@BTD7REAL 3 жыл бұрын

he's already got a vid on that

@DYWTE 3 жыл бұрын

think it's the Audi TDI race car, 8000 RPM limit.

@reedtarted1932 3 жыл бұрын

@@DYWTE I thought it was a motorcycle of some sort

@ugsl5236 3 жыл бұрын

He did that years ago

@SolaricAngel116 3 жыл бұрын

@@ugsl5236 He needs to update.

@ZarijaFilip 3 жыл бұрын

Interesting video

@dirtbiketherapy 3 жыл бұрын

Can you do a video on the few diesel aircraft engines? Keep up the killer vids man 😁

@VisioRacer 3 жыл бұрын

Good idea

@GJM- 3 жыл бұрын

Please, let the specs on screen for longer time, and keep going! Greetings from Argentina.

@juliussd5901 3 жыл бұрын

Thanks for the great video! I think the bore and stroke figures might be wrong for the EMD engine, though

@iasked8741 3 жыл бұрын

Props for the cameramen of the sovjet motor

@aaron9250 3 жыл бұрын

good video

@Colt-tf6xf 3 жыл бұрын

You need to head to Brookville PA to see a single cylinder 200 horsepower Snow diesel engine, under 300 rpm, 14 foot flywheel, and weighs about 40 tons.

@donellmuniz590 3 жыл бұрын

FYI, there's a company called Wartsilla that builds diesels for the world's biggest ships, up to 20 Cylinders, and 40 feet high. They turn 60 rpm.

@bergasms 2 жыл бұрын

Love it. Technically the Lanz Bulldog can run at 0 RPM, as the cylinder doesn't quiet kick over but bounces back and forth. If you can call that running.

@nigelclark7360 3 жыл бұрын

Very good Very interesting.

@stigsslaviccousin5579 3 жыл бұрын

Tento chlapík je veľký frajer, má úžasný kontent

@VisioRacer 3 жыл бұрын

Ďakujem, vážim si to!

@Damien.D 3 жыл бұрын

The Deltic is a seriously smooth running beast. Anyway.... TANKS! TRAINS! Massive engines with STAIRCASES on cylinder head \o/ We want MORE :P

@noahbraastad5957 3 жыл бұрын

Thanks for doing this video!

@damienansell8252 3 жыл бұрын

Lver

@jackkonnof4106 9 ай бұрын

The gp35 locomotive I used to run was a little over 2500 hp gm v16 and at full throttle {run 8} only turned 870 rpm and it sounded like it was gonna fly apart. I remember the crankshaft sticking out the back was like 5 inches in diameter.

@newtronix 3 жыл бұрын

The deltic is an insane engine.

@tomc.2808 3 жыл бұрын

NICE !!!

@1toonhead 3 жыл бұрын

I'm surprised you haven't done the English Electric diesel engines. We had them in some of our trains. Max rev was 750 to 900 rpm depending on models. Some are still in full service after 60 years and in my opinion have one of the best sounding large engines.