LS400 Timing belt and Water Pump Replacement Part II

LS400 Timing belt and Water Pump Replacement Part II - Will It Run?

Рет қаралды 19,360

9 ай бұрын

In this video I'll cover how you can replace the timing belt, water pump, timing belt tensioner, roller, serpentine belt tensioner and roller, radiator fan, alternator, AC compressor and much more on a Lexus LS400 engine.
Here are links to products which were used in this video:
My Amazon Store: www.amazon.com/shop/myratchets
AirCat Compact Ratchet (The Zippy Zappy): amzn.to/3LRVscQ
AirCat Stuby Impact Gun: amzn.to/3LQP9Gt
Paint Pen Markers: amzn.to/3tin8RA
Long Ratcheting Wrenches: amzn.to/45hXaLu
Facebook: / ratchets2015
Twitter: / ratchets15
Instagram: / ratchetsandwrenches
Disclaimer:
Due to factors beyond the control of Ratchets and Wrenches, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Ratchets and Wrenches assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Ratchets and Wrenches, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Ratchets and Wrenches.

Пікірлер: 45

@myRatchets 9 ай бұрын

My Amazon Store: www.amazon.com/shop/myratchets AirCat Compact Ratchet (The Zippy Zappy): amzn.to/3LRVscQ AirCat Stuby Impact Gun: amzn.to/3LQP9Gt Paint Pen Markers: amzn.to/3tin8RA Long Ratcheting Wrenches: amzn.to/45hXaLu

@mbox314 9 ай бұрын

The video of the removal process is edited very well. You get the sense of how many fasteners need to be removed without having to sit through the entire process.

@curtismorrison8171 9 ай бұрын

Although I am not fixing vehicles, I still love these videos.

@wesfields9322 9 ай бұрын

1uz engine has to be one of the easiest engines to work on a timing belt. Lexus/toyota been doing it for a long time now and still going strong. Glad this owner is trying to keep this relic alive.

@Clamlifenc 9 ай бұрын

That’s a lot of work, I appreciate your time to show us how it work, thanks

@williammouri1096 7 ай бұрын

I think that belt was counterfeit. That would have been a disaster for someone with less experience. Great video as always!! Excellent.

@youtubeuser1110 4 ай бұрын

Dude thank you so much this video is so detailed great work

@JackdeDuCoeur 9 ай бұрын

Nice work

@ZayedGR 9 ай бұрын

Did u changed front main seal

@MyWolffy 9 ай бұрын

Yea I’m pretty sure the marks didn’t line up only because the belt was backwards lol but you’re right it doesn’t matter at all lol. But I think they referenced them where you’re looking at it not as sitting in it so left cam would have been passenger side. Just for ease of install on inexperienced techs lol if ya got the marks lined up then it don’t matter

@Juntasification 9 ай бұрын

Can't see it from video, but usually the belt rotation is marked on the belt also. I would have try'd it other way, but it probably doesn't matter. One Honda engine I did, the belt had no rotation marks, but it try'd to walk off the cam the other way, and not the other so go figure.

@myRatchets 9 ай бұрын

No if you put the mark for left camshaft on the left cam than the mark for R cam would be towards crank

@spiridondimaris465 9 ай бұрын

Good job my friend

@JonnyDIY 8 ай бұрын

Great job Eman! 👍 that lil AirCat seemed to really speed up the job and thanks for sharing the tip about lining the stuff up in order of removal. Problem with me is I've never had a garage 😆 just a driveway and I put all the parts back in car or box. I usually take pictures though. And now make videos so can always look back through footage if stumped

@carlosmunoz7934 9 ай бұрын

Great video

@kxmikalbot9639 29 күн бұрын

1995 currently in the process .. you said to do the timing i have rotate until the marks meet again? its a fun one.. taking apart all its components .. mine is extremely dirty. bought it off for 900 and all it needed was this exact job. and the radiator. everything else is good . but also doing the oils. yeah.. its a fun job (no sarcasm) thankful for what you do man.

@johngracia8914 9 ай бұрын

I'll be honest with you. That looked like a pain in the * with that giant LS V8, but you showed her some love.

@johannriedlberger4390 9 ай бұрын

Manufacturer torque spec of the harmonic balancer🤣

@adambennett2176 9 ай бұрын

Hey hey!!!!! Do it your selfers!!!!!!

@rmedal4594 3 ай бұрын

Your right, the belt marks would line up if you had put it on with the arrows facing toward the engine. But yes, it doesnt matter.

@Lordvoldemore 9 ай бұрын

Heck yeah LS400

@stevec5657 9 ай бұрын

That's really strange the painted timing marks don't line up. I looked up the part (Mitsubishi CD190) and it appears to be the right belt. Very cool video series btw 👍

@timd1833 9 ай бұрын

If the belt is put on with the lettering facing you, the marks would line up. But, it doesn't really matter if all the "pulleys" are properly in place.

@themechanic6117 9 ай бұрын

This just happened to me doing a timing belt on a toyota v6 , the belt marks didn't line up because the belt was installed backwards . I know it's not necessary but I just removed it and flipped the belt around and all is well again lol

@CarlosContreras-gk9gp 9 ай бұрын

❤ you are awesome ❤

@Sanghax3 5 ай бұрын

Hey, do you recommend changing the crankshaft seal while everything is apart? I know the camshaft seals you should leave alone. But it seems like the crankshaft is right there so it would be easy to replace it. Thanks

@Billy-rr7re 9 ай бұрын

hey hey hey do it yourselfer

@Paradoksis 8 ай бұрын

Thank you very much for the video, I am from the Russian Federation and we have a bad literature on the repair of this engine .

@razaq7712 5 ай бұрын

What happened if the camshaft during 180° the crank it's up on piston number one

@tetttettamilli6761 9 ай бұрын

@RnW - Sidenote (important) - So did u get that "although changed leaking ECU capacitors vehicle still had driveability issues" sorted?

@myRatchets 9 ай бұрын

I got another rebuilt ecu for it but that was bad too so now waiting for another one :)

@DearSX 6 күн бұрын

I see some of these water pumps come with a gasket in the package?

@MrMaybe-mv9cs 4 ай бұрын

How much would u charge for something like this like what’s a good price to pay

@RotoRCol 9 ай бұрын

at 2:22 what did fall into the coolant?

@Mattschindig 8 ай бұрын

Timing Belt Cover Spacer.

@bigdogpete43 9 ай бұрын

Timing belts and chains are a real failure point for lots of engines. It seems like an integrated gear driven component would be a much better way to go.

@stansbruv3169 8 ай бұрын

Wait! The old paper towel in the socket trick? Please pardon my ignorance but what’s going on there please?

@myRatchets 7 ай бұрын

That way you can have the bolt in the socket and hold the socket upside down if need be and it won't fall out.

@perfectpeanut3244 6 ай бұрын

The belt didn't line up because the crank mark actually goes right under the crank. The line gets lined up with a circle under and then lined up to the hole after it. The timing marks didn't line up because the belt was placed too forward.

@joshlampe3458 9 ай бұрын

13:20 YOU DID IT WRONG! It is required that you say "click" when torqueing fasteners with impact wrenches. Even the drug addicts at the auto body shop know that, come on man.

@gabinorivera1460 6 ай бұрын

You used the wrong mark on the crank. The marks on the bottom

@MyWolffy 9 ай бұрын

I absolutely HATE seeing RED rtv 😢 makes it look like such cheap work using red rtv …. So much better looking to use grey. I can’t say it’s worth buying oem Toyota sealant but why do people use the most hideous stuff when working on engines. What’s so hard to use grey lol

@myRatchets 9 ай бұрын

Grey is not as coolant resistant as red rtv