Lumen LED Halo Rings Installation Instructions

Рет қаралды 695,668

10 жыл бұрын

LED Halo Rings by Lumen www.carid.com/universal-headli... will increase the light output and visual effect of your vehicle's headlights. Lumen LED Halo Rings can be used as OEM replacements or easily wired into existing headlight assemblies not originally equipped with them. Provides up to 50,000 hours of lifetime vs. 2,000 hours for traditional bulbs while using a fraction of the energy without getting hot. CAN Bus compatibility ensures no flickering, bulb out warnings, check engine lights, or other data loop errors on modern vehicles so equipped. Available colors and diameters of angel eyes you can see at CARiD's website www.carid.com/

Пікірлер: 187

@adilchaudhry8642 6 жыл бұрын

That has to be one of the most cleanest civics I have ever seen

@GHP99 6 жыл бұрын

Lol, one of the last original Civics.

@vatoloco1348 5 жыл бұрын

lol I have a 09 civic but its rebuilt and when I got it decidef to take off the bumper and the dude that had it before me had it up with double sided tape😅 so I decided since it was already ruined to paint the decals since the tape was showing through

@newyorkboss6124 5 жыл бұрын

They just did it for commercial 😂

@coydog7902 5 жыл бұрын

*Confused screaming*

@hakage8517 4 жыл бұрын

Haha, not many left

@gplusgplus2286 5 жыл бұрын

Silicone will go dry and you will never be able to take the headlight apart again. Use the same material, its called butyl sealant.

@Vishal_ks 4 жыл бұрын

if u throw heat air ...then it will loose...so u can remove easily

@soppingwetburgers6493 4 жыл бұрын

@@Vishal_ks hes talking about the material used to seal the headlights, please dont make comments about shit you don't understand

@fintansky9369 3 жыл бұрын

@@soppingwetburgers6493 He was talking about how the silicone is easy to take apart. Don’t comment about shit you don’t understand.

@yahbahisrael6522 Жыл бұрын

Cap....heat gun will take it apart

@seal-n-shinedetailing7348 6 жыл бұрын

I just installed mine last night on my g37. Went with starry brand halos. Made a little 3 minute video outside in day time as that's when they get the most use. Over 300 colors and patterns , I'm a happy customer. They make any vehicle stand out . Try not to fall in love with them

@mark-fu4yu 4 жыл бұрын

Thanks for the tutorial. Finally someone that explain straight & direct！ 'old is gold'

@DapimpBDSD 3 жыл бұрын

"Took us about 2 hours to do these halos" So it'll take 1 week for me to do it you say........

@chinaleighshawtymane 2 жыл бұрын

Did you do them ?

@anthonygiordano6265 4 жыл бұрын

I wish you guys showed the electrical connections and how it was all done a bit better. Only thing stopping me from going ahead with this job.

@danielzukowski5184 3 жыл бұрын

Me too

@diegouy8277 3 жыл бұрын

Just splice it to your headlamp or your running lamp (if you want them on all the time)

@langamaphumulo5009 4 жыл бұрын

Thank you for your very professional,precise and straight to the point demonstration.

@TimSzabo Жыл бұрын

@@carid Yo! I am a student at El Camino and you are part of our program :D so cool you guys posted a nice video like this!

@phatista 6 жыл бұрын

Why did you use oversized halos? Why not just use smaller ones? Doesn't look right. They are cut off.

@KB-xe8mt 3 жыл бұрын

It gives an eye-like look where the bottom is like a lower eyelid. You can do smaller to sow whole ring. It depends upon what appearance you prefer.

@AvinashArora0 10 жыл бұрын

Fantastic guide, well spoken, and all steps clearly outlined!

@widowmaker777 8 жыл бұрын

I always listen to well articulated men who have white hair.

@animaxofficial4559 5 жыл бұрын

😁😁😁

@NeoJSsk 5 жыл бұрын

They have the real experience !

@mark-fu4yu 4 жыл бұрын

Exactly！

@cablenowadays6586 4 жыл бұрын

Except bernie

@saby8765 3 жыл бұрын

I thought this is Scooty

@michaelmarini3123 6 жыл бұрын

Thank you for the straight forward explanation, it covered my few question very well...

@NanoProtection 10 жыл бұрын

Looks really cool! Well done CARiD! ;)

@newyorkboss6124 5 жыл бұрын

Finally good ass instruction video we need more like these other ppl caint explain it right

@wuzihuzi 3 жыл бұрын

When I searched this it was literally all Jeeps!

@jerryrivera7704 2 жыл бұрын

I like the way u installed and showed how to ..very simple clean and fun.

@Biddybalboa Жыл бұрын

except the electricals the most important part

@janierios1194 3 жыл бұрын

THE WORK IS SO DAMM HARD,

@mikhailalphonso9611 9 жыл бұрын

i bought those for my em2 civic aftermarket projector headlights and its pretty bright and it was a perfect fit also. pretty east to install. i think oracle invented this new kind of halo. its like a ccfl and led hybrid. its bright like an LED ring but smooth like a CCFL ring.

@El_TerribleVP 7 жыл бұрын

Tk you Sr. Very professional tutorial!

@CCBurban 5 жыл бұрын

Car Id has a KZfaq channel I got goosebumps 🤭🤭🤭

@elandy4831 8 жыл бұрын

Thank you CARID

@jamesryan6224 4 жыл бұрын

"Slotted" screwdriver. You're welcome. lol

@RotogripRocks 4 жыл бұрын

Thank you Larry David

@hiroshi138 8 жыл бұрын

Nice tutorial. Clamping the two pieces back together (vice tape) to re-set the glue may be more effective, no?

@mikeyjohnson9316 7 жыл бұрын

I have aftermarket headlights with a ring around it but it's not bright enough I wanted to order sum like this and install them .. but wouldn't the light behind it still be on when the rings turn on?

@AznXReveal 8 жыл бұрын

Would you happen to know the size for an Acura TL 3rd gen (2008)? Thank you

@abdovwmk4 3 жыл бұрын

Great video so helpful

@edgarcuello5349 7 жыл бұрын

nice video what size the ring you used en this Honda civic

@akamekira2769 5 жыл бұрын

Will it get burn?? Bcs the wire didnt connect with any 12V relay

@kingturk3918 2 жыл бұрын

How do you know what size you need for specific model . Example golf mk5

@utube31291 8 жыл бұрын

I wanted know what's the diameter of the picture hanging wire?

@-.__ Жыл бұрын

By wiring it to the parking lights does that mean the lights would only be supplied power when the parking lights are on? I'm not too familiar with headlight assemblies yet

@ramonzamudio4442 6 жыл бұрын

Please help me I cant find any tutorial to install led halo rings in a mercury grand marquis 1986. Maybe you can tell me how to do it.

@bigodeku1491 3 жыл бұрын

Quick question guy's, what's the functions of the red and black wire connector that comes with the projector? Secondly, where do that connects to?

@shivandabideen4587 8 жыл бұрын

very well stated and layed out... awesome and helpful video

@Spartan117A51 8 жыл бұрын

+CARiD hey carID I'm not scared to take apart anything I'm just scared with the wiring part? how do I do the wiring the right way?

@tlowwilliams3783 4 жыл бұрын

Where can I go to get mine's done I have halos but I want to change the color

@chechilesgarage2536 3 жыл бұрын

Hey buddy, I'm trying to install an angel eyes in a VW T3 but I've ordered a 163mm complete angel eyes and the led driver but does not work, I tryed everything even directly to the battery and nothing happens... The led driver output is 900v 25hz... I though I did ordered wrong? Could you help me?

@Soldier1287 5 жыл бұрын

are they on when the headlights are on, or do they turn off

@willcarruthers7989 3 жыл бұрын

are these road legal cos I want to buy them but they technically interfere with the reflectors in the light

@blackpower143hp 5 жыл бұрын

Very good video.

@randomrangoon5476 4 жыл бұрын

Straight forward. Thanks

@erinpitt580 4 жыл бұрын

The HALO don't have backing to reflect to halo light out to the front of the car, and the inside of the headlight assembly is soaking a lot of light and reflecting it back out kind of drowning out the halo effect. Use adhesive reflective tape on the back side only of the halo, to prevent the light from soaking into the headlight assembly, and the halo will be brighter and more "seperate" light source from the headlights when they are off and just daytime running lights on, And with headlights on at night. You will get more light projected outwards from the HALO to the front of the car, and it will look way better at night.

@JonRedeye 4 жыл бұрын

Erin Pitt what reflective tape would you suggest?

@tonycervantes4816 5 жыл бұрын

Can i put on 97 nissan maxima gxe car id ?

@badxblondie 3 жыл бұрын

Does anyone know if this will work on a 2020 Honda Civic ex sedan with stock lights???

@davejalenderki 10 жыл бұрын

Nice video.

@jamesnewell3521 6 жыл бұрын

Was here wonder if it could work in my car, but when I click on the vid it’s my exact car 😁

@jamesnewell3521 6 жыл бұрын

Thanks much. Love from Jamaica.

@LeSigNagE 6 жыл бұрын

Sorry to hear that :-(

@bcob8989 3 жыл бұрын

@@LeSigNagE what

@tonycervantes4816 5 жыл бұрын

What size i need for 97 nissan maxima gxe can you help me CAR ID. AND NICE JOB . YOU DO

@coydog7902 5 жыл бұрын

Your a legend!

@Merlin333J 7 жыл бұрын

Interesting halo build, it raises a couple of questions. 1.) Can the clear plexi wand withstand the temperature of the main headlight and UV? 2.) what wattage, type and size of LED are you using? Thanks

@JohnDoe-rd5hu 7 жыл бұрын

Hi do you have a video on how to wire to a switch for a on and off in side the car?

@JohnDoe-rd5hu 7 жыл бұрын

CARiD if i do wire them to the parking light would they turn on and of while the turn signal is on?

@rgbtape5946 9 жыл бұрын

Well done

@SlipBscsr12 9 жыл бұрын

I'm just a little confused with the wiring part, but I'm sure I'll get it

@banggangmelly700gang7 9 жыл бұрын

Any for Infiniti i30

@hello12321hi 5 жыл бұрын

I tried to do this in the oven but it turned into a cake. what do i do?

@Dalvarus 7 жыл бұрын

I installed CCFL rings and they melted as the top was above my headlight will the plasma do the same ?? Please anyone

@Dalvarus 7 жыл бұрын

CARiD it was because if the halogen but im unsure whether i should go for the plasma wouldnt the halogen do the same to the plasma ring?

@tinkusing3761 5 жыл бұрын

Very very good

@robertomorales5347 Жыл бұрын

i fkn need the patience of this mister to do this shit hahahaha

@chanraj100 5 жыл бұрын

i always afraid the glue may leak after time,,

@robertfranks3934 2 жыл бұрын

cant you glue it

@vertigo7096 10 жыл бұрын

This a terrific instructional, thanks.

@demigod5219 7 жыл бұрын

does having halo rings & vinyl tint on your headlights enhance or decrease the effect of either? or does each just do its own thing even together?

@katogee7042 3 жыл бұрын

Can they 1998 grand marquis

@adaywithshaman2318 2 жыл бұрын

is that safe from dust?

@urban8644 6 жыл бұрын

Easy to install

@mik3ybabii 8 жыл бұрын

would soldering the connection directly to the lights power and ground be a bad idea?

@superdutyzack 8 жыл бұрын

+CARiD.com I have a custom headlights that have Halos but are poor quality and I want the RGB Oracle set, would these fit my truck?

@csanisha2 8 жыл бұрын

help full video . thank you

@silossilos1927 2 жыл бұрын

I was considering this for my older car, nd lucky me the example is ! 🤣

@glock23gen4 5 жыл бұрын

Seems like a lot of hassle

@chrism7067 4 жыл бұрын

well thats just how it is to install something aftermarket inside your head light housing. Dont do it if you dont wanna put in the time or pay someone else to do it

@wolfgurl88 4 жыл бұрын

I'd rather pay more for a complete kit already done

@shanerikalundy320 9 жыл бұрын

How do u know what size u need

@krisjones0926 8 жыл бұрын

Measure you're headlights? Did you even watch any part of this

@ukkano 6 жыл бұрын

I don't even own a car, i just liked the speech

@3koolboy 2 жыл бұрын

Anyone know what that Tool was called to drill that Slot for the Halo?

@magia5035 2 жыл бұрын

That shit is ghetto fabulous.

@kxmikalbot9639 4 жыл бұрын

This adds HP! Let's goooooo! Lmfao 😂

@leorodriguez6080 4 жыл бұрын

Cringe comment

@Masomanable 7 жыл бұрын

that was the easiest front bumper removal ive seen.. can you do it to my car

@Mooch2myLoO 6 жыл бұрын

its even easier when u have the quick release .. u can get it off the car within 15 seconds

@sandhyabipin 5 жыл бұрын

2 things to clarify 1 shade on light beam reaching area 2 Chance for melting of soldering led for connection wires because of heat producing in the reflector chamber when halogen head light bulb is on for long time ride Please advise.

@shawnmacritchie5351 3 жыл бұрын

i see water in the headlights down the road

@joboss9511 5 жыл бұрын

Doesn't seem that great of a halo assembly for how much time you have to put into the whole process.

@dennisthemenace8825 3 жыл бұрын

By the prophets were you blinded by its majesty

@MrJiblack 5 жыл бұрын

Hot water will loosen the bond to

@dilukabeylk 6 жыл бұрын

Note the amount of reflection from the headlight reflector itself that has ruined the halo light quality of contrast.

@SentinelEx 5 жыл бұрын

I agree. It looks so dumb tbh.

@chrisnguyen1944 6 жыл бұрын

Or u coulda just stick it in the oven at the right temperature amount

@JamesWilson-du4xt 7 жыл бұрын

I tried it at 500 degrees but it took too long so I set it at about 950 and I over heated it but it came apart so I'm not complaining lol

@DirtyMikeHoncho 4 жыл бұрын

What kinda oven do you even have that goes past 500 lol

@Keepitgoinging 2 жыл бұрын

But why?

@hustlerkc11 2 жыл бұрын

Gonna leak like faucet, have to add new sealant in the channel.

@godzilla7148 6 жыл бұрын

Bernie Sanders before he became a socialist!

@LoserSnoozer 6 жыл бұрын

BRRRRRRRRRRRRROOOOOOOOOOOOO

@ELP1125 3 жыл бұрын

💀💀💀

@danfuerthgillis4483 4 жыл бұрын

I would blow a gasket if this failed after a few days and had to remove everything again!!.

@Chupria 3 жыл бұрын

That's way too much work. If you sell a 2004 Saturn Ion Sedan complete headlight and halo ring already pre-installed I might buy it.

@stevenharpervw 5 жыл бұрын

But your reducing the reflective efficiency of the reflecting With that big circle. This makes no sense

@bmanclassics4350 5 жыл бұрын

Jus turn the rings on at the same time I guess 😅

@djmonster13 5 жыл бұрын

the process was well spoken but it would have been easier to just install the right size halo and not cut into the reflector. Never use hanging wire guys nor cut your head lights. Use the right shit in the right place.

@Thesquiggleman 3 жыл бұрын

Fuck it I’ll just ask my garage to do it 😅

@chrism340i 6 жыл бұрын

or u can buy a bmw

@RagingBad 5 жыл бұрын

chris s there are many BMW's that comes with halogens

@J-O-N- 5 жыл бұрын

No thanks, we'd rather not be in the shop every six months.

@magicalpieceofpugtato8359 5 жыл бұрын

LOL!

@mikexcanxjerk 5 жыл бұрын

when I see ppl with a bmw with full halogens from like 2000s I just laugh , like you really bought a base model car.

@jivdis1x 5 жыл бұрын

@@J-O-N- you bought the wrong BMW.

@scarh3426 5 жыл бұрын

Should had used smaller rings would had look better

@sringfield45 6 жыл бұрын

Who uses scotch locks like that? He wouldn't be putting mine in

@jayrock305 5 жыл бұрын

If your going to do it do it right

@mathewchillackal3165 5 жыл бұрын

Well that little cutted spot for halo....it will ruin our headlights after in future.

@monjier 5 жыл бұрын

Just buy Stok headlights in the future if that's the case

@themarianaboys3759 3 жыл бұрын

yal wrong for puttin them lights on that car bruh. smh

@badimpulses17 6 жыл бұрын

When you can't afford a BMW

@pxndxlunx5821 6 жыл бұрын

manifest 73 bmws arn't the only shits to have them shits.

@jivdis1x 5 жыл бұрын

@@pxndxlunx5821 do tell, what is the first car brand that comes to mind when you see halo rings?

@brosk1s883 5 жыл бұрын

jivdis1x riced out JDM cars. BMW has had hexagonal halos for probably a decade now, you wouldn’t remember BMW for having this style of halo unless if you’re really into old cars