The tools used remind us that simplicity is the art.... Thank you for sharing your approach with us.
@j.r.tidwell33185 жыл бұрын
I TRULY ENJOY WATCHING YOU WORK. YOU ARE A INTELLIGENT MAN. THANK YOU FOR SHARING THIS VIDEO. CAN'T WAIT TO SEE PART TWO.
@fareastwood5 жыл бұрын
Thank you for watching! See you again with Part 2
@50guitar Жыл бұрын
So it’s like a big Moxon vice with some bells and whistles added? Very nice.
@TrophyJoe5 жыл бұрын
I like the curved holddown clamps. Very clever. The ‘bench’ needs some demonstration.
@ryandavis75935 жыл бұрын
I loved the video. I couldn’t help to notice that you edited out the trains going by. If you are comfortable with the trains, than so am I. As a wood worker also I am always looking for techniques to add to my own skills. After 35 years there is not much left to learn, however I have learned some new things from you. Thank you from Texas.
@abettermousetrap4 жыл бұрын
This Canadian says " Excellent craftmanship and a beautifully done project" Kudos
@policedog40304 жыл бұрын
6:59 to 7:15 A dado blade in a hand-held circular saw? I didn't think it was possible. Results excellent! I thought the wood dust at the end was about a microsecond from exploding if the sparks from the armature brushes in the vacuum motor set it off. (skeptics see 2015 Taiwan Water Park explosion).
@AndreiIR0004 жыл бұрын
I am wondering about that machine, but it has a chip exhaust port, it must be a wood grooving machine. A strange beast between a planer and a (handheld) circular saw... Can't find it on google though..
@policedog40304 жыл бұрын
@@AndreiIR000 That word "grooving" I didn't think of until you wrote it but that term does turn up a couple Makitas; maybe not available in all countries and maybe not exactly what he used in the video; here is a cut and paste: Makita CA5000X 4-5/8" Aluminum Groove Cutter Milling Machine SKU CA5000X $639.00 www.festoolproducts.com/makita-ca5000x-4-5-8-aluminum-groove-cutter.html Blades $145.00 and $130.00 4-5/8" Dia. C.T. Saw Blade, 90º (A-96132) Cuts 90 and 135 degree variable speed 2200 to 6400 rpm Works very similar to the Festool PF 1200 E-Plus Alucbond aluminum milling machine which is not currently available in the United States. This one looks kind of similar as well but uses a larger diameter blade: Makita XPS01Z 36-Volt 6-1/2-Inch X2 LXT Cordless Plunge Circular Saw - Bare Tool $349.00
@gunterschone84025 жыл бұрын
Nice video. The "small" workbench looks very good and fulfills its purpose. Speedy recovery for your fingers.
I enjoy your uniqueness of thought and approach. This unit very much has my attention, conceptually, as the basis of a top-tier assembly jig. Well done!
@Oldiesyoungies5 жыл бұрын
please show you using the table. it is tough for a foreigner to understand how it is used
@fdek8454 жыл бұрын
発想がユニークで面白いですね。作るのは大変だったでしょう。細かな作業に向いているように思いました。
@ursklahr56013 жыл бұрын
incredible workbench and also a piece of art. Is this your invention? It is not suitable for my needs, but its great to see still new ideas after centuries of improvements.
@lolaa22005 жыл бұрын
Thank you for this video. I love the music , what is it ? By the way it's verry refreshing to see anything about workbench and even woodworking in general that is not a copy of Roy Underhill, Chris Shwartz or Norm Abram. Don't get me wrong, i have the biggest respect for those three guys. It's just do we realy need 10's of clones of them ? I just prefer watching the original. Your work is original both in the design and the Japanese aproach of woodworking. So Thank you for waking me up after so many youtube woodworking (clone) video started to bore me. Just my 2cents
@fareastwood5 жыл бұрын
I borrow these music from the free bgm website "DOVA-SYNDROME". kzfaq.info/get/bejne/etppmKWbr8q4mpc.html kzfaq.info/get/bejne/h6uaaa2Clc-viZc.html I am grateful for your opinion and I agree. While I have the respect for great pioneers in the woodworking, I always keep in mind that I do not make their copies. I aim at my work being original. But it is difficult for me. Sometimes I learn from their videos... I am sorry I cannot express that I want to say well. Because I am not good at English. Anyway, thank you for your comment.
@sirtblairjr5 жыл бұрын
Hi Sir. Hisato, I really like your work bench that you made. Your talent is awesome in many ways. Doing things yourself and self taught is great. Do you have plans to follow because I would like to build a workbench as yours? Thank you
Nice work, indeed. My congratulations. It deals with an original and out of rules project. I think it might be considered as a portable workbench, too. I see you cut the sliding dovetails with your circular saw; it seems a good idea, even if it can be more difficult compared to hand made cut. What about? More, What kind of wood is it ? Thanks very much and all my best. Giuliano, Italy
@jschraubenzieher9104 жыл бұрын
Manual dovetail cuts that long? Are you kidding?
@SomeRandomPerson1635 жыл бұрын
Impressive circular saw skills
@BischBaschBosch5 жыл бұрын
Very clever. I like it.
@robertbrunston54065 жыл бұрын
Looks interesting! I definitely never seen one of these before! Thank you.
@fareastwood5 жыл бұрын
I saw for the first time too! Thank you for watching.
@dustyhush5 жыл бұрын
very special workbench never seen before ( i like it !!!!) ;)
@skitzochik3 жыл бұрын
While beautiful and creative, this worktop just doesn't seem very practical. I have a hard time seeing how these features make work more efficient.
que buena idea amigo excelente el video gracias por compartir saludos desde Colombia!!
@fareastwood5 жыл бұрын
Gracias por mirar.
@iy54995 жыл бұрын
СУПЕР механизм!! Восторг космический!! Нобелевскую премию!! На полном серьёзе. А проект Дом, будет продолжение?
@oskarconka83025 жыл бұрын
Mexicans,what PUTO
@kevdavis32074 жыл бұрын
Well done friend.
@jean-pierreaudet20985 жыл бұрын
Too nice to work with!!!
@SuperDataSafe4 жыл бұрын
Nice work. Very entertaining and instructive to watch. But the dust collector needs a cleaning. ;-)
@yvonbellemare57345 жыл бұрын
nice music
@georgepalchikov71765 жыл бұрын
Truly an unusual approach. Greetings from Russia!
@fareastwood5 жыл бұрын
Спасибо за просмотр
@TMM.T3DM5 жыл бұрын
Great job!
@user-hb6pf4uh5v5 жыл бұрын
使い道が多い作業台凄いです。掃除機であの広さのクズ吸いきれるのかな?最後のオチも面白かったです。
@fareastwood5 жыл бұрын
掃除機は、作業している手元周辺のホコリを吸ってくれないかな〜と思って取り付けてみました。
@ytg63524 жыл бұрын
I 'm curious how it works.
@vitalydukhnovsky88024 жыл бұрын
IMHO, very complex. But, if it works for You - its OK.
@peachdragon74 жыл бұрын
ラストシーンで高評価www
@gm24074 жыл бұрын
I have never seen a workbench like that before. Your title says Workbench new style, is there a specific name for this design other than new style?
@garymosier12394 жыл бұрын
I enjoyed the video after I had turned off the music
@jlinkels4 жыл бұрын
When I saw the intro I thought: Wow I am happy a Japanese woodworking video without the stupid music. But no, that stupid repeating music tune had to be added. WHY?
@GregorShapiro4 жыл бұрын
I think this guy needs a new Makita drill with better speed control!
@roseworld80915 жыл бұрын
A great idea!!
@pablorraco5 жыл бұрын
Man, you are the master!!!
@crossgrainwoodproductsltd92305 жыл бұрын
Sir, could you please tell me what that tiny brass object is you used to transfer the placement of your dowels? Do you think you will ever sell your designs such as this assembly/disassembly table? If you do, I will be your first customer! ~Dolly I had an afterthought. I Would add small patches of leather to the clamping area of the hold downs especially when working with finer woods or when repairing something. Just another brilliant setup!!
@fareastwood5 жыл бұрын
That tiny brass object is thumbtack. My movie → kzfaq.info/get/bejne/qs6hocii28vPoI0.html Then I will not sell the design of this workbench. But you are free to refer to this video and make something similar. I am very happy that you will make the same one I did in this video. Do you get me? I am not good at English. And I will use small patches of leather Thank you for good idea.
Hello from Germany, very nice workbench 👍, where i can find a Plan of it, can i buy it?
@fareastwood5 жыл бұрын
This workbench is my original design. I did not draw drawings. I like this workbench. It increased that I could do it thanks to this. But I have used this workbench for several months and I found a few points to be improved. So it is hard to say that it is a complete design. I'm sorry I can't help you. Vielen Dank fürs Zuschauen
That must be quite a difficult cleanup job when all the sawdust gets into all the slides and runners though . you must surely spend 1/2 your worktime with the vaccuum cleaner,no?Seems an overly complicated way to clamp things when a few dog holes would do. still ,it is different . maybe more a work of art or furniture than a proper ,useful working bench.
@aferetis23795 жыл бұрын
awesome work but.. why so much dust ??? :D :D
@MichaelMarko4 жыл бұрын
Great work!! Hahahahaha!
@carlodevivo29285 жыл бұрын
Is that common pine wood?
@fareastwood5 жыл бұрын
That is Japanese cedar. Thank you for watching.
@AndreiIR0004 жыл бұрын
@elf-build.林久 : What is the (grooving?) machine at 06:59, please tell us!
@JamieKhau4 жыл бұрын
maybe he's using a regular blade on a circular saw, but just moving the fence over on multiple passes