Mac Pro Trashcan(6,1) Logic Board Repair

No video

Mac Pro Trashcan(6,1) Logic Board Repair

Рет қаралды 11,774

Күн бұрын

Mac Pro 6,1 repair
I/O board repair - dead because of lightning strike via Thunderbolt device.
Thank you for watching!
Contact Us:
/ logicboard.macbook
main.iboff@gmail.com

Пікірлер: 22

@imun1ty 2 ай бұрын

Troubling that a MOSFET can be defective in some units or is it the heat that the trash can generates the cause?

@edwinwilson2810 3 жыл бұрын

Can you please tell me the spec and model number of the MOSFET that was replaced. Thanks in Advance🙂

@Mrgeorgeymc 3 жыл бұрын

Great skills 👍

@iBoffRCC 3 жыл бұрын

thank you

@mrrobotvpn5012 3 ай бұрын

Do you have a schematic for this or could make one?

@atoopuk 8 ай бұрын

Hi, I found your video as I've got the same problem, do you know where I can find a replacement 58888d mosfet?

@shamimhas 2 жыл бұрын

Good work

@mndlessdrwer 2 жыл бұрын

I was always saddened by the fact that Apple never revised this model to add support for DDR4 RAM and the Xeon E5/E7 v3/v4 CPUs. It would have made a huge difference for people who wanted more processing power, though it also would have likely required them to order a different extrusion process for their aluminum heatsink wedge in order to cope with the higher TDP of the chips. I'm currently running a 20-core Xeon from the E7 v4 product family and it's quite nice, though I am running Windows since making a hackintosh is just a pain. It would also have been nice to get more upgrade paths for the graphics cards, though AMD moving away from Crossfire and Apple and nVidia not being on good terms, I can see why it may have been problematic to try to upgrade a machine intended to use two graphics cards like these.

@iBoffRCC 2 жыл бұрын

That's why they redesigned the machine as Mac Pro 2019, much more modular than this one

@kanzai12 4 жыл бұрын

LoL 'trash can', akhirnya! ada upload video baru ni.. sila upload lagi kalau ada hihi

@iBoffRCC 4 жыл бұрын

mmg akan ada :)

@thealonseitor 2 жыл бұрын

when i turn on my MAC PRO 2013, the leds of ports turn on by a few seconds but after then turn off and mac don't start, do you now whats the problem?

@WinrichNaujoks 5 ай бұрын

I have the same problem. Did you ever find out the reason?

@mrrobotvpn5012 3 ай бұрын

Take the casing off. What error led's do you both get when you hold a magnet up to power supply to the right of the HDMI? There is a manual with the led errors. my suspicion is the button battery is dead on the PSU board if you take it apart or a blow mosfet or fuse.

@officialcwiggy6350 26 күн бұрын

@@WinrichNaujoksI just had one of my three trashcans do this yesterday! Open it up disconnect the fan at the top very carefully! If you can and blow compressed air all over and into it. If that does not help please replace thermal paste on the CPU! It fixed mine.