Рет қаралды 20,550
plastering concrete block / brick wall with sand and cement aka stucco ready for the skimming plaster to finish it off, This is the undercoat for the top coat of finishing plaster gypsum for skimming #render #sandandcement #plastering
HOW TO RENDER SAND AND CEMENT A WALL READY FOR PLASTER OR TILES ON AN OLD WALL
Hi everyone this is a video in which I show you a lot of tips on how to go about re rendering an old dusty wall that had loose plaster on it covering the basics and the must dos and don'ts this demo could help the diyer a lot or even a homeowner understand what must be done.
If the video helped or you just like watching plastering be sure to thumbs up and mac scribe for more mac attacks :):)
Spear and Jackson bucket trowel that is still going strong for me after many years = amzn.to/2pcpReS
The pointsman hawk = amzn.to/2O1nKmp
Refina trowel pack and holder = amzn.to/33PbCvi
microphones used =
USB Microphone MAONO = amzn.to/2MQLJnK
Lavalier = amzn.to/33He7iR
Blue Microphones Snowball Microphone - Black = amzn.to/2P0OINg
camera used = amzn.to/34Nx8AX
All amazon links are affiliated links will cost no extra to buy from but we might get a %
tools links direct
www.refina.co.uk/
How to sand and cement render concrete block wall 1st coat scratch coat DIY
• How to sand and cement...
Find us and like us here
/ macplasterin. .
Tweet us here
/ macplastering
/ macplasteringservices
our amazon store affiliate www.amazon.co....
n the video I use a lot of tools I use the refina mega mixer to make the sand and cement in the large 40 liter refina tube I use a refina trowel with a pointsman hawk to apply the render an aluminum straight edge or know as a refina feather edge and a 1200mm speedskim on my skimming to get the wall straight and ready to be floated. Then I just use a float to rub it up which has nails though it to give a key for the next coat or tiles.