Madcow "Sport-X" high-power model rocket assembly (part 3 of 3)
Рет қаралды 432
This video shows step-by-step instructions for constructing the Madcow "Sport-X" three-inch diameter high power rocket kit. Options for the payload bay are also discussed.
Part 1: motor mount, shock cord, nose cone.
Part 2: fins, payload bay.
Part 3: recovery system, finishing.
This kit is available from the manufacturer at www.madcowrocketry.com/3-spor....
@michaelc6817 2 ай бұрын
Nice looking rocket when done. Look forward to seeing it launch!
@TinyHouseHomestead 2 ай бұрын
You should not store your parachutes in your rockets! 😁👍👍🇺🇸
@REAR_rockets 2 ай бұрын
I've found it doesn't make much difference as long as you fluff them out before launch. I don't usually store high-power chutes in the rockets since I use them on multiple rockets.
Rocketry Education and Research (R.E.A.R.)
Рет қаралды 331
Rocketry Education and Research (R.E.A.R.)
Рет қаралды 374
Rocketry Education and Research (R.E.A.R.)
Рет қаралды 292
Rocketry Education and Research (R.E.A.R.)
Рет қаралды 366
Rocketry Education and Research (R.E.A.R.)
Рет қаралды 99
Rocketry Education and Research (R.E.A.R.)
Рет қаралды 288
Rocket Vlogs
Рет қаралды 414 М.
Rocketry Education and Research (R.E.A.R.)
Рет қаралды 128