No video
HOW TO WRAP A BOAT - CAMO!!
Рет қаралды 63,940
Күн бұрынWrap Materials:
Felt Tip Squeegee: amzn.to/2VRn3Cd
Edge Sealer: amzn.to/2DZxdGG
Knifeless Tape: amzn.to/2VsxbSy
Punch Set: amzn.to/2HaXu6N
Heat Gun: amzn.to/2HbrtvF
Square Blades: amzn.to/2VpbhQ2
Simple Green: amzn.to/2E2UGXE
The above are Amazon Associate links
Where to get the wrap: www.camoskinz.com/
Minuteman Signs: minutemansigns...
My Email (Business ONLY): mainetroutwhisperer@gmail.com
Instagram: www.instagram....
Facebook: / mainetroutwhisperer
Check out my Lure Company!
Trout Whisperer Tackle Co. Website: www.troutwhisp...
Trout Whisperer Tackle Co. Facebook: / troutwhisperertackleco
Trout Whisperer Tackle Co. Instagram: / troutwhisperertackleco
@CruizinWithTheCarsons 3 жыл бұрын
One of the BEST vids on youtube I've seen regarding a DIY boat wrap. Good job and way to go on walking us through the entire process in detail.
@TheGibbons334 4 жыл бұрын
I want to wrap my boat and have been looking for a good video showing how. This was great!! Thanks 👊
@garycotz563 Жыл бұрын
Holy cow man... I'd never consider doing this... but now? HELL YEAH! Got a skiff to do so THANKS for the GREAT Video! Did good, didn't waste any time either.
@mainetroutwhisperer Жыл бұрын
I love it and it transformed the boat
@jamesdoiron8456 Жыл бұрын
Wow what a transformation awesome job love to have my own boat done
@usmcmma 4 жыл бұрын
Looks really clean and wow what a big difference it made! Gonna wrap my hunting canoe with this!
@refsa01 4 жыл бұрын
Great 👍 job 👏 guy , that was pretty impressive , I have a hard time just putting on decals on my truck. I have always wanted to do a wrap on my boat , just not sure 😕 that i may do a good job. And you're right the pros charge too much.
@reelphatties6426 3 жыл бұрын
Killer video this is the way I will wrap my Drift boat
@changievangie 4 жыл бұрын
U made look so easy. One of my dyi project...
@livefreefishmore1008 5 жыл бұрын
That came out pretty good!
@rashauneverett9382 5 жыл бұрын
Great job, came out good. Nice Tacoma as well
@rhinohd 5 жыл бұрын
Looks Great! I think I have my next off season project! Tight Lines!
@Harlanmote 4 жыл бұрын
The worst part for me was going over rivets. Pop the bubbles with a pin. I used a socket to go over the rivets.
@keithmoore3800 2 жыл бұрын
So clean! Great job/video
@greggiono8789 5 жыл бұрын
Big improvement,great attention to detail.
@russellhansen7004 2 жыл бұрын
Very nice job on Wrap!
@precisionanglingYT 5 жыл бұрын
Pretty Slick. I’ve been looking to do the same on my boat.
@Harmons_Rd 4 жыл бұрын
Great video, looking at wrapping my boat. Did you use the permanent vinyl or removable? How’s it holding up? Cheers!
@Jim_Tabor 2 жыл бұрын
Thanks for sharing , looks nice
@ericbrayman3244 3 жыл бұрын
That looks amazing.
@kenbrown5449 Жыл бұрын
Excellent job!
@williamthigpen4480 4 жыл бұрын
Great job. Looks awesome
@houndsmanone4563 3 жыл бұрын
Damn tht boat looks sweet, brother. You saved some mega bucks doing it yourself. Enjoyed the full-watch. 👍🏽🙂
@bassfishingmaine6691 4 жыл бұрын
I want to wrap my boat too and this video explained it perfectly
@py8pointer 5 жыл бұрын
Looks great. Good job👍👍
@lsgt5132 3 жыл бұрын
Awesome video boss.
@danielroth1551 2 жыл бұрын
Great work. 💪👌
@terrymunn1224 Жыл бұрын
I live over in NB Canada and was wondering what you went with the permanent or removable and how its holding up.Thanks Terry
@mainetroutwhisperer Жыл бұрын
Did removable . It’s pretty rugged
@socalsaltwateranglers 3 жыл бұрын
That's Fooken Awesome! Great Job and she looks Sweet! New Sub 🤙🏻
@slappy2825 3 жыл бұрын
How has the vinyl held up? Please comment on the durability!
@tonyvaldivia7300 3 жыл бұрын
Looks Good!
@Pitchpullin5 5 жыл бұрын
any updates on the trout tracker?
@heathergibson7507 5 жыл бұрын
Boat looks good!!
@hunterstomytrain 2 жыл бұрын
great job
@powrider911 4 жыл бұрын
dude that looks sick im goin to check out that wrap website now!!!!
@mainetroutwhisperer 4 жыл бұрын
powrider911 AKA REELBROTHERZ it is sick! Pretty easy to do also!
@powrider911 4 жыл бұрын
Maine Trout Whisperer is yours the removeable or permanent one on the site?
@mainetroutwhisperer 4 жыл бұрын
powrider911 AKA REELBROTHERZ removable
@legendsclubproduction 2 жыл бұрын
Well done👍🏼👍🏼
@mainetroutwhisperer 2 жыл бұрын
Thank you!
@JohnSmith-st5ud 2 жыл бұрын
Awesome
@Silverxxx450 3 жыл бұрын
Awesome 👏
@joshstaples9892 Жыл бұрын
I had a knot in my stomach the whole time you guys were putting the vinyl on..one wrong move 😬😂
@mainetroutwhisperer Жыл бұрын
No kidding! Hah. 20ft piece just hanging out there
@stevecollins1506 3 жыл бұрын
Nice video thanks! how did it hold up so far?
@TravisInCanada1 4 жыл бұрын
Good job, just a bit of advice with the knifeless tape, pull it at a 45 degree angle and not straight out.
@BirchBarkOutdoors 3 жыл бұрын
45 degrees in which direction? Towards the pull?
@mauriceb77 3 жыл бұрын
Nice!
@lesliemartin9179 2 жыл бұрын
Hey, that looks sweet, what finish is that, Satin, or gloss?
@mainetroutwhisperer 2 жыл бұрын
Satin I think? It’s a pretty flat wrap. Certainly not gloss
@vdubplate 2 жыл бұрын
How has it been holding up
@terrymunn1224 7 ай бұрын
the link to the wrap does n ot work. where did you get it ?Thanks
@mainetroutwhisperer 7 ай бұрын
I think they went out of business. Try Metro Restyling
@Tiggitytye 2 жыл бұрын
How has it held up?
@brandonthompson5795 Жыл бұрын
What size kit did you order for this boat
@mainetroutwhisperer Жыл бұрын
I believe I said in the video. Think I got a 20ft roll of it and cut it in half down the middle
@barryseifert6053 4 жыл бұрын
Hey Trout Whisperer how the wrap holding up.Any problems!
@mainetroutwhisperer 4 жыл бұрын
Barry Seifert it’s great! No issues!
@barryseifert6053 4 жыл бұрын
@@mainetroutwhisperer Thats great i, going to do that to my boat.I live in Pa but go to Maine twice a year to fish .Maybe i will see you up there.
@tedcontreras9729 4 жыл бұрын
Could a aluminum bass tracker be wrapped?
@mainetroutwhisperer 4 жыл бұрын
Ted Contreras yeah why not
@JohnDrach 2 жыл бұрын
How did the wrap hold up around the rivets? Do you find water was getting in there?
@mainetroutwhisperer 2 жыл бұрын
Worked awesome. No issues. It lives in my garage most the time though. Has spend 4 days at a dock once and no issues.
@JohnDrach 2 жыл бұрын
@@mainetroutwhisperer Did you put edge sealer or anything on the rivets to keep water out?
@mainetroutwhisperer 2 жыл бұрын
@@JohnDrach I didn’t. Def didn’t even need it
@JohnDrach 2 жыл бұрын
@@mainetroutwhisperer Awesome. Thanks for the info. Ive got my wrap and all tools sitting in the gar age for this weekend coming up
@andrewtulip7409 4 жыл бұрын
Why put a white decal on it after camo
@mainetroutwhisperer 4 жыл бұрын
Andrew Tulip that’s my business logo...
@flogistics-ti5nx 25 күн бұрын
Dude you need to update your video. The company website doesn't work. They either went out of business or something. their reviews on the Facebook page are horrendous. Shitty company to buy from.
@mainetroutwhisperer 25 күн бұрын
@@flogistics-ti5nx I did a drift boat wrap video recently and used a new company.
Hold Fast Marine -DIY tips and tricks-
Рет қаралды 111 М.
Gale Force Twins
Рет қаралды 1 МЛН