Major rust hole.... How to repair FAST and EASY! D.I.Y. Auto Restoration

Рет қаралды 7,198

Guzzi Fabrication - D.I.Y Auto Restoration

2 ай бұрын

This channel is dedicated to making " how to videos " for the guys working on their own projects at home. YES you can !
SHOP INFORMATION :
Contact us at : guzzifabrication@yahoo.com
Our Address is: Guzzi Fabrication
3206 Main St Suite 106
Rowlett Tx 75088
profile.php?...
Check out my other videos in our KZfaq playlist page:
/ @guzzifabrication3448
Honesty - Quality - Craftsmanship

Пікірлер: 102

@richcaseaxon 2 ай бұрын

That Impala is going to be so nice when done. Thanks for the videos.

@guzzifabrication3448 2 ай бұрын

Thanks ! Yes Sir

@damienmikkelsen6056 2 ай бұрын

Love the dirty finger for marking!!! You’re never without a marker

@guzzifabrication3448 2 ай бұрын

👍

@justinroberts5400 Ай бұрын

Excellent work as always Robert!!!

@guzzifabrication3448 Ай бұрын

Thank you Sir !!

@autofanaticcars 2 ай бұрын

I remember doing this exact style repair on the front frame rail on a 66 Mustang i was restoring in HS it came out excellent and invisible repair once primed and painted 👍

@guzzifabrication3448 2 ай бұрын

Was it a fastback?

@autofanaticcars 2 ай бұрын

@@guzzifabrication3448 drop top the front rail was rotted right under the battery tray

@guzzifabrication3448 2 ай бұрын

@autofanaticcars Convertible, very nice.Yeah that's a common area for rust In that model

@monadking2761 2 ай бұрын

I remember way back repairing the floors on my first car, which was a 63 Impala. I cut thin strips of an old metal can of Sears spectrum oil and wove the strips together to get the conture of the rear floor boards and applied bondo over it. Yes, my fingers were bleeding from the sharp edges hay. I was 16. I never heard anyone call it resistance welds. I always heard them called spot welds. Now I'm still restoring cars, but I have learned a lot since then. Nice work, by the way.

@guzzifabrication3448 2 ай бұрын

Awesome memories ! Thanks for sharing !

@timwest9300 2 ай бұрын

Mr Robert I love your vids , I learn something everytime I watch them, I love your attention to detail, that is the Way I do things, thank you for all your time and help and efforts of making these vids take care and God bless

@guzzifabrication3448 Ай бұрын

Thank you Sir !

@derrickwebb7230 2 ай бұрын

just was taken to school. thought you would have had to replace the inner with a hole like that. saves a lot of work just doing this.

@guzzifabrication3448 2 ай бұрын

Happy to pass it on. Thanks !

@jamesvasquez5465 2 ай бұрын

Robert! I had a great convo with you on the phone about my 64! You are a very humble and talented dude! I appreciate you sharing your expertise!

@guzzifabrication3448 2 ай бұрын

I appreciate you supporting the channel ! Thanks !

@JamesSmith-kg8xg 4 күн бұрын

This is hands down THE DOPEST CHANNEL on KZfaq! Thank you bro, you are inspiring!!

@guzzifabrication3448 4 күн бұрын

@JamesSmith-kg8xg that's awesome man, thanks !!!! Happy 4th

@OldBeaters72 2 ай бұрын

I’m learning from your videos that staying focused is a big part of successful repairs and moving forward. The “how to” that you share helps take the messy guess work away from a hobbyist who otherwise would botch and abort on a job like this. Thanks again for sharing your knowledge.

@guzzifabrication3448 2 ай бұрын

I make these videos for people like you, thanks for supporting the channel !

@UnconventionalMetal 2 ай бұрын

Good choice in tools. Lincoln machines and Dewalt grinders are also my weapons of choice.👍

@guzzifabrication3448 2 ай бұрын

Yes Sir !

@thebull9212 2 ай бұрын

Always informative brother!! That impala is gonna look great wen u get done!!! Keep it up!!

@guzzifabrication3448 2 ай бұрын

Hey brother ! actually that was a couple of years ago, the metal work on that Impala turned out really nice. Have a great weekend !

@timswitzer792 2 ай бұрын

Youre videos are going ro help me a ton on my bug!! Thank you!!

@guzzifabrication3448 2 ай бұрын

Awesome ! VW's are cool !!

@johnwolffe8473 2 ай бұрын

I’ve seen every video you’ve posted, some more than once. Everything about them is top quality. The work you do, the narration, the camera work, the neatness of your shop - all speaks to the highest standards. Bravo for putting out the best stuff in car restoration I’ve seen.

@guzzifabrication3448 2 ай бұрын

Really appreciate the compliment brother !

@jamesrobbins7167 2 ай бұрын

love your channel Robert. from James in British Columbia Canada

@guzzifabrication3448 2 ай бұрын

Thank you James for supporting the channel !!!

@vehdynam 2 ай бұрын

Great information ! Many thanks for doing this , it really helps us in our home garages.

@guzzifabrication3448 Ай бұрын

Awesome ! you are the reason I make these videos

@AndysDogHouse 2 ай бұрын

Hey Robert. I like the way that you remove the old metal. Cool template trick. Wow, Robert, that's a perfect repair. Thanks for sharing.

@guzzifabrication3448 2 ай бұрын

Thank you for supporting the channel !

@djparn007 2 ай бұрын

Thank you, Robert. 👍

@guzzifabrication3448 2 ай бұрын

Thank you for supporting the channel !

@alicenaillis9412 2 ай бұрын

Wow you make that look soooo easy ! Nice job Guzzi Fabrication !

@guzzifabrication3448 2 ай бұрын

Just following the formula, Thanks for watching and the comment !!

@phooesnax 2 ай бұрын

Nice work as always

@guzzifabrication3448 2 ай бұрын

I really appreciate your supporting the channel !

@GetStuffDone 2 ай бұрын

Thanks! I’m learning a lot!

@guzzifabrication3448 2 ай бұрын

That's what this channel is all about !

@benclarke6177 2 ай бұрын

Great video, Robert! Awesome repair - love it!! Keep up the great work on both saving these old girls, AND the videos!

@guzzifabrication3448 2 ай бұрын

Awesome compliment ! Thank you for supporting the channel !!!

@olhemi1 2 ай бұрын

Great Video Thanks

@brianr2113 2 ай бұрын

Love your videos.. gives me motivation to get my 1963 impala restored.... slowly but surely.. thank your

@guzzifabrication3448 2 ай бұрын

A little here.... a little there.... you'll get there !

@stevejanka361 2 ай бұрын

Good evening Robert, another helpful video. I do like your cleanliness. Makes for a better attitude and work ethic. You take care and good luck.

@guzzifabrication3448 2 ай бұрын

Thanks ! I really appreciate you taking the time to support the channel !

@samuelsmith2522 2 ай бұрын

Extraordinary Video!!!

@guzzifabrication3448 2 ай бұрын

Thank you @samuelsmith2522 !!!

@moseshancock3336 2 ай бұрын

Nice video thanks 😊😊

@guzzifabrication3448 2 ай бұрын

Thank you Sir !

@frankkennedy5361 2 ай бұрын

Outstanding results. I will be looking for video to show what technique/best practices you use with plasma cut edges.

@guzzifabrication3448 2 ай бұрын

👍

@WILODSM 2 ай бұрын

Guzzi on the controls!!!! 🔥🔥💪🏾💪🏾👌🏾👌🏾 love your work bro!!!!

@guzzifabrication3448 2 ай бұрын

Thanks !!!!!!

@user-ze9ku1wq1r 2 ай бұрын

I'm on my 64 impala, awesome job 👏

@guzzifabrication3448 2 ай бұрын

Thanks !!

@nick.v4218 2 ай бұрын

Looks good 🙌🏻

@guzzifabrication3448 2 ай бұрын

Thanks !

@Freebird67 2 ай бұрын

Thanks Robert

@guzzifabrication3448 2 ай бұрын

Thank you Sir !

@allenjohnson2016 26 күн бұрын

Thanks my friend, I appreciate the knowledge

@guzzifabrication3448 26 күн бұрын

Hey thank you for supporting the channel !!!

@allan-mw7op 2 ай бұрын

very nice work !

@guzzifabrication3448 2 ай бұрын

Thanks !!!

@charlesloar3210 2 ай бұрын

WOW! Such great info here. Good Job.

@guzzifabrication3448 2 ай бұрын

Thank you Sir !

@ChristerJohansson-ic5be 2 ай бұрын

Thanks for vedio Very nice work

@guzzifabrication3448 2 ай бұрын

Thank you Mr. Johansson.

@glennwilbur2546 2 ай бұрын

Smooth brother

@guzzifabrication3448 2 ай бұрын

Thanks ! we build bikes to, love Harley Davidson !

@jeremyolson2596 2 ай бұрын

Always wondered how they did that!

@guzzifabrication3448 2 ай бұрын

This one is for you brother !

@user-qr7ee2cp4y 2 ай бұрын

Great info! ,I wish I had your skills!

@guzzifabrication3448 2 ай бұрын

That's why I make these videos, for people like you. Thanks !

@egancraneriggingservicesin9142 2 ай бұрын

good tip on template, how do you deal with the por lid? Best i can come up with is to punch holes in the can where the lid goes, try to clean and put some oil in there before i put the lid on. I works ok, what do you do?

@guzzifabrication3448 2 ай бұрын

Cleaning the rim is ABSOLUTELY necessary.... yeah there cannot be any material on the lid or can or you will destroy the can the next time you try to open it... Thanks for bringing that point up !

@fredjones1238 2 ай бұрын

nice explanation no B.S

@guzzifabrication3448 2 ай бұрын

Thank you Mr. Jones.

@JustinRoberts-nm6un Ай бұрын

Hey Robert, I wanted to ask if you would please talk about your frame jig? Did you build it yourself, how did you make it adjustable to be able to fit so many different types of makes and models of vehicles on it. Thank you for all the great content, I would not be making the progress I am on my 1969 Dodge Charger without the help of your videos.

@guzzifabrication3448 Ай бұрын

Thanks Justin ! this video will answer your questions on the frame fixture kzfaq.info/get/bejne/aM6YnLJ-36unYqs.html

@JustinRoberts-nm6un Ай бұрын

@@guzzifabrication3448 Thank you!!!

@guzzifabrication3448 Ай бұрын

@@JustinRoberts-nm6un If you need anything else, ask

@JacobPrecella Ай бұрын

Thanks for all the great videos! Are you welding thru the por15 on the rocker panel when you are plug welding the floor pan down or do you use a weld thru primer?

@guzzifabrication3448 29 күн бұрын

Thanks ! both.

@johnsutter1497 2 ай бұрын

What type of plasma cutter do you use? Thank you

@guzzifabrication3448 2 ай бұрын

That one is a Hobart airforce 40i

@AndySomogyi 2 ай бұрын

Did you paint inside the rockers after you welded in the patch panels ?

@guzzifabrication3448 2 ай бұрын

? Did I coat the inside of the repair panel ???

@AndySomogyi 2 ай бұрын

@@guzzifabrication3448 yes, as in after it was welded, did you spray anything like Eastwood internal frame coating ? I have similar repair, but the paint is very flaky inside the rails, so I’m stripping the paint off , and pumping rust911 with recirculating pump, then I’ll paint the insides with Mastercoat anti corrosion point using an extended wand sprayer I made .