No video
*Major Update* My heat shielded headers are back!
Рет қаралды 6,420
2 жыл бұрынAfter an 11-week wait, my fully shielded exhaust system has arrived. It's game-on to reassemble the engine bay and plumbing to get it ready for fluids! As mentioned in this video, the Header Shield system is the ultimate in heat insulation properties; checkout a test video I found here:
• HeaderShield - dyno test
(And btw, I'm not sponsored whatsoever by Header Shield. I'm simply a fan of their product and its capability.)
Enjoy Episode-35!
@dukiemoto8676 2 жыл бұрын
Can’t believe we are at episode 35, and I’ve excitedly looked forward to every episode! This is most definitely one of KZfaq’s hidden gem of a build. Thank you👏
@andywiththen 2 жыл бұрын
Good to see some one actually taking heat management seriously rather then just hoping for the best.
@DanDulac 2 жыл бұрын
Yes indeed. It was pricey to have the shield done but it’s worth the peace of mind knowing it’s the best option. And now is the time to do it before the car is done. 👍
@amplifex4134 2 жыл бұрын
The finish on everything, even at this point, is so right. The factory should take some notes! I'm 47, and this thing makes me make car noises in my head like a kid, 😆... Outstanding work!
@DanDulac 2 жыл бұрын
I’ll be 50 in a few months…and the car noises in your head doesn’t subside. 😁
@garrethnewell9688 2 жыл бұрын
This is an incredible build Dan, you’re going to have one of, if not THE, greatest Ultima’s on the planet. Total respect for everything you’ve managed so far and the exceptional work you’ve put in. You should be extremely proud.
@DanDulac 2 жыл бұрын
Thanks so much for the kind words Garrett! 🙏 This build has been in my head for many years and I’m fortunate to be able to bring it to reality! 👍
@jackleonard2088 2 жыл бұрын
Dan you must be so pleased, and rightly so. I was holding my breath when the engine was hoisted in. Thank you for showing us when things don’t go right the first time, your calm approach is inspiring.
@seandenard3341 2 жыл бұрын
DukieMoto totally agree! Binged all 34 episodes in a week then had to wait a month for this update. Dan, don't keep us waiting so long this time please! ;) Great job, I've learned a lot!
@lefroy1 2 жыл бұрын
Great to see so much progress after all this time Dan. Please do some driving/review/reaction vids after she's finished. It will be so gratifying to see the finished article in motion after following the build all along.
@JoelKSLC 2 жыл бұрын
Engine bay looks amazing Dan, great job!
@Sandhoeflyerhome 2 жыл бұрын
Looks so perfect, like 3D Art. A thing of real beauty. Much better than anyone could have guessed. Well done Dan Dulac !
@macman6107 2 жыл бұрын
It looks great Dan.
@datboi8140 2 жыл бұрын
Absolutely stunning. One day I hope my work has the level of quality yours does. Big fan ever since your first couple videos. Keep up the great content👍🏻
@Carbonblade100 2 жыл бұрын
Can't wait to hear her fire up.... so close...still a ton to do, but as always, so impressed. Everything looks so clean, amazing build thus far. Excited for ya.
@DanDulac 2 жыл бұрын
🙏 thanks so much. It’s getting closer!
@Andrew-vx2ls 2 жыл бұрын
I'm just catching up! Great work Dan. It is very useful to see how you solve problems on this build.
@blakek.7201 2 жыл бұрын
It’s coming together really well can’t wait for the first start
@RichADio 2 жыл бұрын
Exciting developments!
@jamespray 2 жыл бұрын
Worth the wait in all respects. What a bay!
@mytuberforyou 2 жыл бұрын
I think that mounting bracket for the dash unit needs some triangulation/stiffening ribs in the back so the unit doesn't end up in the driver's lap. Even if you are relegated to filament printing, there are some good carbon filament options that would be superior in strength and also weight. Air boxes are SWEEEEEEEET!
@marcopolo6590 2 жыл бұрын
Maranello approved ❤ Ciao 👍
@pyroboobysmith359 2 жыл бұрын
Beautifully thought out, engineered and executed.
@nunonunes2747 2 жыл бұрын
Oh boy oh boyoboy! Can't wait to hear the V10 😁
@denis9450 2 жыл бұрын
Engine bay looks sweet
@huddleberryfin 2 жыл бұрын
Your going to be so happy with those in the end. Very OEM looking.
@DanDulac 2 жыл бұрын
It was pricey to do but knowing I’ve done the best option to reduce heat back there is worth the peace of mind. 🙏
@seanprice8271 2 жыл бұрын
Great taste in cars, you have my dream garage!
@raymundjusay4632 2 жыл бұрын
Great work again & Looks AMAZING 🌟✨🌟🙌🏽🌟✨🌟
@bascorstjens9967 2 жыл бұрын
Absolute killer
@mohamedlarby8526 2 жыл бұрын
Incredible im a fan
@dave5833 2 жыл бұрын
Indeed I am putting a new axle in It’s BRK “ car trailer” Your Build is almost finished and ready to Dyno. The next Barrett-Jackson Fall Road Tour is in New England. You might want to apply send them a pic or two of your baby.
@DanDulac 2 жыл бұрын
Hi Dave-oh cool. Good idea! It is very unique for sure. 😎. Yup, I’ll be ready for a trailer ride in another couple weeks. 👍
@dave5833 2 жыл бұрын
@@DanDulac I will have the trailer finished next week and awaiting your text,email or call.
@user-mj6tg1gr1s 8 ай бұрын
Great work! What epoxy did you use for the carbon fibre epoxy tubes?
@DanDulac 8 ай бұрын
I used high temp epoxy that i picked up from Composite Envisions.
@ItzSillyy Ай бұрын
Was that stainless steel exhaust wrap or aluminum? looking to do this with my gtr
@DanDulac Ай бұрын
It’s stainless. Header Shield did the work. Amazing stuff.
@anomamos9095 2 жыл бұрын
If you had used 7/8th bar in the dash you would have had access to a world of motorcycle accessory and mirror mounts in any material you care to name . There are some in inch but not as many by a very long way.
@craigjarvis9677 2 жыл бұрын
👍👍
@yanni1398 Жыл бұрын
If anyone knows, if my headers are already ceramic coated can they still be sent in to be heat shielded?
@DanDulac Жыл бұрын
I actually had my headers cerakoted before I decided to have them heat shielded. The company who did the work said they would only needed to sand blast small areas at the ends where the heat shield gets welded to the flanges. There’s no such thing as overkill when it comes to heat control. Heat shielding is the ultimate heat insulation available but it is expensive. Worth it though, imho.
@elitecol69 2 жыл бұрын
Why didn't you ceramic coat the headers with ceramikrome instead of the wraping?
@DanDulac 2 жыл бұрын
Hi Fred! I actually Cerakoted the headers and then later decided to get them heat shielded. Heat management is the biggest enemy on these cars and i wanted the ultimate in heat insulation. Other builders have stated while the Cerakote helps, it’s still not enough to keep engine bay temps down.
@SylasG Жыл бұрын
Like Dan said, headershield is a lot more effective at heat management than any ceramic coating.
@rogerbennett2025 4 ай бұрын
with the entire header wrapped with that stuff............will the headers retain ALOT of heat and crack the welds.??? or somekinda distortion .??? .. but that wrap job looks great -- bidenomics has got me so broke right now i would have to do it myself and half of my headers on my 1969 javelin LOL
@DanDulac 4 ай бұрын
No issues like this reported with this kind of wrap. In fact, by not allowing heat to dissipate through the header piping, it accelerates the exhaust gases for more efficiency. It’s quite a setup. 👍
BleepinJeep
Рет қаралды 111 М.
Heatshield Products Inc
Рет қаралды 72 М.
JMSpeedshop !
Рет қаралды 12 М.
Throttlebuddies
Рет қаралды 812
Arthur tussik
Рет қаралды 56 М.