Make A Metal Drill Press Vise Without Welding | DIY Homemade Drill Press Vise

Рет қаралды 1,860,614

2 жыл бұрын

This time I'll be making a simple and heavy-duty metal drill press vise without welding. This is a DIY metal project so it could be made by anyone who knows how to work with an angle grinder, drill, and tap.
DIY Fractal Vise Jaws From A Gear Teeth - • Bench Vise Improvement...
Music by Epidemic Sound (www.epidemicsound.com)
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips.

Пікірлер: 237

@MikeMurphy-dj3qu Жыл бұрын

This KZfaq Channel is better than most. I love the fact that this craftsman makes tools without welding. Many of the channels assume that everyone craftsman has access to welding. You can see that this person is a craftsman, not just another KZfaq hack. Well done.

@davidsneddon2242 2 жыл бұрын

Absolutely brilliant WDT, first class engineering and re-purposing. Love it.👍

@bamabackroads1203 Жыл бұрын

Anytime you use something you built with your own hands it's 1000 times more satisfying than using something you bought. Excellent design.

@Oh6Torch Жыл бұрын

This vise is better constructed than ANY cast iron drill vise in its class. The materials used are far superior.

@Teddykhil Жыл бұрын

Bloody Yippa M8, Will make my own also. Yeh, it might be cheaper to buy one, but, If you make it yourself, you have the pride and satisfaction of knowing it was made by YOU.

@Bob_Adkins Жыл бұрын

That's a beautiful vise, I like it more than my cast iron drill press vise of the same size. 1 thing I would change, and already changed it on my purchased vise: The pivoting handle lever was a pain to use. I found it slow to turn, and was always grasping to find it or turn it the right direction. So I replaced it with a small crank handle, now I love it.

@Baetzibaer Жыл бұрын

Beautiful, but forbiddingly heavy and accordingly clumsy to handle. And non-yielding positioning on the drill's base looks pretty awkward.

@mojoomla Жыл бұрын

Simply SUPERB Videography ! Not a single second of camera defocus anywhere even with such close up shots !!!

@TheDistur Жыл бұрын

This is a great example of how to make stuff without a welder. Thanks for the video!

@williamstenger8452 Жыл бұрын

Now that is "Yankee" ingenuity at it's finest! Yes, it's easier to buy one ready made, but making your own really personalizes a tool.

@andytraverse Жыл бұрын

Great video. My test piece as an apprentice engineer in fitting was to make a precision machine vise using only steel flat stock bar, a hacksaw and files, a rule to mark out and drill/ream holes using a pillar drill. Oh and a lathe to screwcut the leadscrew!

@hobbyless4089 Жыл бұрын

What's an apprentice engineer?

@Felipera_ Жыл бұрын

You made the screw yourself? That's so cool!

@amandahanson8188 3 ай бұрын

I'm impressed. I am getting into machining and this is a great demonstration. It's the kind of inspiration that gets the creative juices flowing. You earned my sub. Cheers from Wisconsin.

@AM-dn4lk Жыл бұрын

I loved this build. Apart from being functional it was beautiful. You have some good angle grinder cutting skills.

@tonycummings5427 Жыл бұрын

I just subscribed to your channel I really like your work its neat and professional looking . Another reason to build your own tools is the pride of making something yourself that will be around for generations to come. I look forward to seeing more of your projects. Really nice work brother.

@rd-iz7mo Жыл бұрын

Brilliant design and beautiful craftmanship 👍🏼

@danalexandroaie3233 Жыл бұрын

I really like it, I do not have a grinder yet, but I will buy soon and make a similar vise. I think the model you built fits 110% to my needs. Thank you very much for posting that nice video. I already subscribed.

@kevinbowker2385 Жыл бұрын

Excellent build! Thanks for sharing.

@ElTelBaby Жыл бұрын

That is absolutely BRILLIANT...

@schaynedavids1176 Жыл бұрын

Displayed great craftsmanship and integrity.

@jimmorrison7053 10 ай бұрын

I will use this to make my own PCB HOLDER thanks for sharing your knowledge man, God bless you.

@uriel-heavensguardian8949 Жыл бұрын

Love this! I watched this months ago! Now I can come back and support. Thanks for this.

@SJG-96 Жыл бұрын

Yes I agree, it absolutely brilliant.

@sgntbilco Жыл бұрын

Why buy it when you can have the pleasure making it. Nice job !!

@georgebennett676 2 жыл бұрын

Dude, that is a great looking vise! I would pay for a vise like that. I would bet others would too. Great job!

@markolsen7438 Жыл бұрын

You can buy them at Harbor Freight for under $20

@luckysakonta3724 Жыл бұрын

Very well executed, absolutely neat 👌🏽

@harm3336 Жыл бұрын

Excellent job. Very clean and neatly done. I will watch for more of your projects.

@waynegoebel395 Жыл бұрын

Your handle - WDT- says it all. Very nice.

@leehaelters6182 Жыл бұрын

Very elegant. Only seconds of viewing were needed before I knew that you are my kinda craftsman/engineer. Subscribed immediately! Now, can you show us how you will make another beautiful vise using the Kurt Angle-Lock idea, much obliged!

@josephgiustiniani2834 Жыл бұрын

Very nice project, especially for those who do not have a welder, or a lathe. Careful handwork. I also agree with your statement as to why not just buy one. This is the kind of project that gives you practice in measuring, filing, cutting, finishing. Is this a vise one is going to put huge amounts of force on or beat on with a hammer..? NO...! But on a workbench where one needs something sturdy fairly heavy, and easy to maneuver, this fills the need nicely. THANKS for sharing.

@madwilliamflint Жыл бұрын

Some REALLY nice techniques here. Wish I could find a piece of steel like that.

@Exsig12 2 жыл бұрын

Awesome work!! Thank you for sharing.

@luiscatari579 Жыл бұрын

Excelente, un hermoso y preciso trabajo. Una joya de un taller. 👍

@cristianpopescu78 Жыл бұрын

You are a mechanical Genius!👍love it.

@user-hf9jx4yq2z 11 ай бұрын

You made it.... because you enjoy building... 😊👍👍👍

@georgeblack589 Жыл бұрын

That's actually pretty nice! Great build!

@lordieshepherd Ай бұрын

Absolutely brilliant. I would much prefer to make my own than buy something off the shelf that is nowhere near as good. Well done!

@viorsa8200 2 жыл бұрын

Excelente tutorial , la súper/prensa ,un trabajo magnífico , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España)🤓 😜

@dm3stone Жыл бұрын

Fantastic build. Well done.

@adeilson701 Жыл бұрын

Excelente trabalho !!!

@MCsCreations 2 жыл бұрын

Fantastic work, dude! Nicely done! 😃 Stay safe there with your family! 🖖😊

@nitacook8119 Жыл бұрын

Great job. Very creative. Well done. Thanks for sharing.

@antonionunes7728 Жыл бұрын

Boa noite amigo, eu estava precisando muito dessa dica da Esmerilhadeira, muito obrigado

@tinker-ing-around2317 Жыл бұрын

Bravo sir! Well done!

@oybekabdukarimov7644 Жыл бұрын

Без слов понятно, идеально технически подход!

@nobuckle40 2 жыл бұрын

Very enjoyable. Thank you showing a non-welded version.

@JuanGarcia-1125 Жыл бұрын

Merecidísimo like maestro! Gracias por compartir y saludos cordiales desde Reynosa Tamaulipas México!!!

@tareqarar70 2 жыл бұрын

You are an artist!

@Nperez1986 Жыл бұрын

price and non returnable time used = priceless. It's cool to learn how to make one incase

@johnnyshinnichi1785 11 ай бұрын

I love the angle grinder roller thingy👍

@joujimiichi1 Жыл бұрын

Excellent build man!

@antonbeckmann5217 Жыл бұрын

Nice clean build. Great details.

@Youtubeforcedmetochangemyname Жыл бұрын

The enjoyment of building it that's why I make a lot of my own tools

@jockellis Жыл бұрын

Great work but I’m more interested in the attachment to the angle grinder. Have you made a video on this. I have problems trying to do critical cuts.

@mrfireblade900cc Жыл бұрын

Superb workmanship coupled with a great design idea.. Top draw

@arifsanjaya9673 Жыл бұрын

Clean job, amazing sir 👍👍 thank you

@omarsedano4301 Жыл бұрын

I love it good job. Now I’m gonna have to make one. Thank you 🙏🏼

@bangsidi Жыл бұрын

thank you Very inspiring. your work is so perfect

@nivonivo5132 Жыл бұрын

Değerli ustam mükemmel bir el işçiliğinin eseri olmuş.emeğine yüreğine sağlık başarın daim olsun

@muratbasarir6046 2 жыл бұрын

İts perfect job sir.greetings from Turkey

@jamesrichardson771 Жыл бұрын

Wow💥 you are quite amazing my friend !!! I can't stop thinking' imagine if this guy had a welder💥 thanks for sharing your "incredible skills" my friend 👍

@Nettle314 5 ай бұрын

Beautiful!

@mebarkiahmed Жыл бұрын

Thank you, you are a creative craftsman

@pierredessage5530 Жыл бұрын

Vraiment merci beaucoup pour tout!!!

@andriale7939 Жыл бұрын

Tanpa las sedikit pun 🥰🥰 Like idea pren

@obeadedayo9452 Жыл бұрын

Good work, I appreciate this a lot.

@pavlosflemetakis8460 4 ай бұрын

Great work and very useful Thanks so much for sharing

@user-rm4zi5jl3e Жыл бұрын

чистая работа,молодец вы,руки мастера.

@krishnanramalingam915 Жыл бұрын

@richardmahan4197 7 ай бұрын

Brilliant! Well done, sir.

@cuanham Жыл бұрын

Very cool build. Thank you

@fuckingpippaman Жыл бұрын

Awesome. Made with little tools and better than any cheapo vice

@Hoodamax Жыл бұрын

I stumbled across this. Great video.

@elvisdepaula8312 2 жыл бұрын

Muito bom mesmo

@alexbuts7915 Жыл бұрын

Класс! Единственно что - к этим тискам нужны сменные накладки, чуть выступающие над этими зажимным уголками. Чтобы можно было в тисках не только сверлить, но и пилить, резать.

@francescobattaglia5322 Жыл бұрын

Fantastic looking !!!

@moinshaikh2265 2 жыл бұрын

Very Lovely job.love it.

@sddiymakeitworthit7512 2 жыл бұрын

Well done 👍

@homemadetools Жыл бұрын

Good work. We shared this video on our homemade tools forum this week 😎

@frankdavila4374 9 ай бұрын

Podrías publicar las medidas por favor. Excelente trabajo pienso hacerlo para mí taladro. Felicitaciones

@gregshuffield1976 Жыл бұрын

you did some damn nice work for using hand tools

@abasesmaili9744 Жыл бұрын

سلام بسیارزیبا وتوضیحات کامل عالی متشکرم

@GlennRobinson777 5 ай бұрын

very clever - well done!

@rubenclark8017 Жыл бұрын

Looks awesome!

@anthonygarcia1762 9 ай бұрын

I also love building my own tools because you can build it more rigid and to last longer.

@SuperRAMESWARAN Жыл бұрын

Super work. Thanks

@michaelmurren3432 Жыл бұрын

Awesome build.

@m.a.drawing6253 2 жыл бұрын

Amazing ✨

@user-jn9wl1bt4x Жыл бұрын

Очень хорошо! Мастер!

@jeffersonofficialchannel2034 Жыл бұрын

Brilliant ideas 👍

@pmittal19 Жыл бұрын

Awesome sir, you are really so perfect..

@rw2452 Жыл бұрын

You used a drill press to make a drill press. Nice.

@jxjfudsydudi2737 Жыл бұрын

thank u bro so very good u used ur mind i never seen without wld.

@Anton-sg1ei Жыл бұрын

У тебя золотые руки)

@antoniobolson3908 9 ай бұрын

Lo más ➕➕➕ prolijo que encontré en internet gracias 😃🙂😃🙂🙂😃 haré uno!!!!

@tadeuszjakubowski6470 Жыл бұрын

Dziękuję za naukę

@sergeykirichenko1290 Жыл бұрын

Super master class ! 👍💪

@elan1970 2 жыл бұрын

Nice job....well done

@antonioschum Жыл бұрын

I love it,,,fantastic work👍👍👍♥️♥️

@RD1. Жыл бұрын

Brillian and amazing

@paulwhitmore4240 Жыл бұрын

Nice bit of engineering that well done

@jeanehrenberger116 Жыл бұрын

Really nice build and very good info how to recreate it. The only thing that made me giggle: UNP (the hotrolled U thingies) and 'perfectly flat' in the same sentence 😄👍 over here a straight and not bowl shaped one could be called waste at that point