Make rear seats fold down. 4th Gen Ram rear seat mod

No video

Make rear seats fold down. 4th Gen Ram rear seat mod

Рет қаралды 13,962

10 ай бұрын

Want your rear seats to be able to fold down on your 4th Gen Ram Crew cab pickup? Check out this video on a solution for this problem. Disclaimer ,I am not responsible or liable if you screw up this mod and it doesn't work on your year, make, model of truck. Proceed at your own discretion.
With that said its a fairly straight forward mod and works great allowing access to behind the seat storage etc.

Пікірлер: 22

@higherthanmost1112 8 ай бұрын

THANK YOU!!!! Everyone showing off flipping it down, thanks for sharing the process. I’ve just been pulling only seat back trying to get it come down

@Temptation_Offroad 8 ай бұрын

Welcome! I'm glad it helped out.

@notfamousprepper7369 6 ай бұрын

Doing this tomorrow. Thanks brother!!

@Temptation_Offroad 6 ай бұрын

Welcome! Glad to help!

@user-qj4zb8vg8n 5 ай бұрын

That plastic ends up breaking over time anyways. I just remove it and then put some 5/16" fuel hose with a couple zip ties on the bar hoop on the back of the cab. you might have to trim a little more of the bottom of the metal tab on the seat to clear the fuel hose, but just go slow until it just clears and you'll have plenty still grabbing when the back drops back down. and no rattling! I started with the electrical tape...but it wears out pretty quickly from driving and operating the seat.

@Temptation_Offroad 5 ай бұрын

Good idea

@cpaoutdoors9926 9 ай бұрын

Thanks bud got a 2020 warlock same problem tackling tomorrow morning

@Temptation_Offroad 9 ай бұрын

It goes pretty easily. Just be careful cutting so you dont hit the seats and try to leave a little of the white plastic if possible, otherwise it may rattle a tad and then you just have to put a little electrical tape around the metal to get that to stop. Its easy though.

@Temptation_Offroad 9 ай бұрын

The other seat i got rid of too much of the white plastic compared to the one i showed in the video. So it made noise if you pulled it forward and back. All i did was put some electrical tape around the bracket i cut (shown in video) and then that went away. (Easy fix)

@chamakese55 8 ай бұрын

For anybody watching. At the bottom of the plastic after you cut the metal and plastic. Cut a bit off at a 45° angle, the plastic won't get caught

@Mrjackietreehorn 4 ай бұрын

How’d it go with your 2020 warlock? I have a 22 and my seats don’t tilt up when you raise the bench… wonder if this will not work on the 5th gens

@justinvero1 2 ай бұрын

When you have the base of the seat folded all the way up, do they still stay in the up position locked like original also after this mod? Or will they fall forward when folded all the way up? Thank you!

@nickovallee 5 ай бұрын

When it’s fold up doe the seat fall down when you break?

@Average-Joe 3 ай бұрын

You mean BRAKE?

@4g63tpowered 28 күн бұрын

Yup doing this today. I have 2 subs under the seat i need a spot for a rifle...

@4g63tpowered 28 күн бұрын

It worked buddy I have the full back bench seat and did exactly what you did and I now have a storage area! I also had to cut the plastic off. It's got movement now, hopefully it doesn't clunk to bad

@dirtsailoroff-road5580 3 күн бұрын

@@4g63tpowered Does it make noise? I'm considering this but don't want it to be annoying lol

@4g63tpowered 3 күн бұрын

@@dirtsailoroff-road5580 it does have a rattle on like washboard roads. I wrapped the hooks on the seat. Thinking wrapping the loops on the back of the cab would be better.