No video
Make Your Own: DIY RIMLESS AQUARIUM
Рет қаралды 203,787
Күн бұрынDon't wanna do it yourself?
Waterbox Rimless Aquariums ► geni.us/3j45ZmZ
AQUAPROS T-Shirts! ► bit.ly/2qXd0Zf
Like This Video? Give It A THUMBS UP! 👍
Don't forget to SUBSCRIBE! bit.ly/SUBAQUAPROS
Get Our FREE 15 Aquarium Tips ➨ www.diyaquapros...
Daily Pics and Vids on Social Media!
Instagram ► / diyaquapros
Facebook ► / diyaquapros
Twitter ► / diyaquapros
Check Out Some Playlists:
DIY ............► • How To Make: DIY Canis...
Fish ..........► • Archerfish Profile: Ca...
Science ....► • Aquarium Photosynthesi...
Plants ......► • African Water Fern: Bo...
Reviews ...► • Aquatek Premium Regula...
Popular Videos You Might Like:
DIY Project .......► • How To Make: DIY Canis...
Aqua Science ...► • Aquarium Photosynthesi...
Plant Profile .....► • Java Moss Aquarium Pla...
Fish Profile .......► • Monster Fish: Vampire ...
Review ..............► • Iron In The Aquarium: ...
Some Of My Favorite Stuff
Fish Food .........► amzn.to/2fq4dcp
Project Pump....► amzn.to/2fq2Z0E
Heater ...............► amzn.to/2fMtfH3
LED Light ..........► amzn.to/2fq2N1v
MUSIC: / lakeyinspired
In This Video:
Today were are making a 20 gallon long aquarium rimless! Its pretty easy to remove the rim or brace from a tank and make your own.
Thanks For Watching Guys!!! Don't Forget To 👍 The Video!
@AQUAPROS 4 жыл бұрын
Don't wanna do it yourself? Beautiful Waterbox Rimless Aquariums ► geni.us/3j45ZmZ
@wasd____ 7 жыл бұрын
Safety note: glass should always be sanded wet to keep the dust from becoming airborne. Breathing glass dust is a bad idea.
@an-insane-llama 5 жыл бұрын
Pro tip. Nobody wants bleeding lungs
@donochetti2177 5 жыл бұрын
Whoops...
@ANT1_chad 4 жыл бұрын
From what I've read, crystalline silica is more harmful to breathe. Anphoric Silica, any glass that is clear, is less harmful.
@naveed4119 4 жыл бұрын
cWg_Studios yea but the glass dust will end up cutting your lungs much like sawdust would.
@naveed4119 4 жыл бұрын
cWg_Studios well it could cause long term damage such as nodules forming in your lungs and if the modules get too big it can cause death.
@schunter20 5 жыл бұрын
If you have the patience of Buddha and the finger strength of Thor then you too can have a rimless tank in a short 5 hours.
@theofficialdannydevitoyout9154 4 жыл бұрын
Ouchmydragonballz I’m 13 and did it in 10 minutes with a kitchen knife
@montezcrenshaw3552 4 жыл бұрын
I'mnosuperman 🤣😂😂😂
@lemur1248 3 жыл бұрын
Username checks out
@Leuthen57 3 жыл бұрын
Haha totally feel that
@wesdfk 3 жыл бұрын
I did it in 20-30 minutes whith a razor blade
@danielnguyen148 4 жыл бұрын
I was really confident right before I started reading comments 😅
@laraarias803 4 жыл бұрын
I did mine and it went perfectly :) how did yours go?
@danielnguyen148 4 жыл бұрын
@@laraarias803 It well thanks for asking. I have a 55 gallon tank but I ran into some issues later on with supporting all the water weight without the frame. The width is 12in but without the extra support; the glass was popping out at 13.5 inches in the middle. I had to empty the tank and silcone a quarter inch thick 12x5in glass in the middle of the tank.
@dandles5939 4 жыл бұрын
I just violently ripped mine off with my bare hands on an established tank, guess I got lucky
@laraarias803 4 жыл бұрын
Braden Overgaard on an established tank!????? I could never I was even nervous doing it with an empty tank😂🙈
@nathanmciver6737 3 жыл бұрын
Man glad I complained about a filter! The jokes get tiring. I'll take this as a sign not to look further down the comments
@TheWaterBox 7 жыл бұрын
I want to try it but I've always too freaked out that it'll bust! lol
@saltf.3856 6 жыл бұрын
It works WAY faster and easier if you use a heat gun. Heat up the plastic and use a towel and pull it up. Works great. 20 dollars from Lowes. 10/10 would recommend
@membercup714 6 жыл бұрын
I'm Salty let’s see the tank
@cardboardbox9977 6 жыл бұрын
I use a steam gun
@an-insane-llama 5 жыл бұрын
Do you need to reseal it after? I'm always told that's a must.
@leonotthelion 4 жыл бұрын
@@cardboardbox9977 I use a real gun. 0/10 Would NOT recommend
@adaml5473 4 жыл бұрын
leolion1993 not funny didn’t laugh
@2001kbass 4 жыл бұрын
I love leaving to bottom rim on and painting the back black to hide the wires. Its my favorote tank look if its ginna be against a wall or not viewable from all angles.
@MrZoom4 2 жыл бұрын
Thanks, turned a $9 new 10 gal into rimless today and it came great. Tip for removing the silicone after the rims are off. Use a hair blower and fine steel wool. Start with a blade for the heavy stuff but clean up is a snap with heat and steel wool. Nope, not a scratch, I'm surprised too.
@ashtonmendoza7043 4 ай бұрын
I know it’s been awhile but i’m curious as to how your tank has held up over time, I plan to do this to my 10 gallon
@uncpandabear408 3 ай бұрын
@@ashtonmendoza7043same
@skipcharlie 5 жыл бұрын
Good video. A flexible plastic pant scraper works even better. I've done this successfully on a 75 gallon and 30 gallon extra tall with no issues so far. The 75g I used a glass center brace that is 8 inches wide. The 30g extra high I was nervous about not bracing because it's so tall. But, I've had no issues for over a year now. I did not remove the bottom trim on either tank though. Only the top.
@Members_Onlyy 5 жыл бұрын
i have a 65 gallon tank. can i do it on my tank?
@jrcell5832 5 жыл бұрын
Where did you get the brace
@maikolrodriquez 2 жыл бұрын
How have they held up?
@aoooxl9859 Жыл бұрын
@@Members_Onlyy glass clamps connector work well too and don't forget the center brace
@dramoth64 6 жыл бұрын
A couple of things people should note. 1. Do not use that type of box cutter. Use the one that you can really slide the blade out so that you can really get into the corners... if using the box cutter! And if you want to use a putty knife, get the one that is curved on one side going up to a point. Much safer tools. 2. If you want to use a brace like shown in the video, get two pieces of glass. One cut to the outside width of the tank, one to the internal width of the tank. Silicone the two pieces together and press together to ensure that there are no air bubbles showing in the silicone. Once the pieces are stuck together properly, but before the silicone has set, fit the brace into the tank and move it about to ensure that the width is set properly on the top piece. Once everything is in place, wrap some painting masking tape around the brace tightly so that it doesn't move while you are waiting the 24 hours for it to set. Once the silicone is set, trim any excess silicone from around the brace and then silicone it into place. Looks much neater and nicer and is a lot more sturdy.
@TwoOnesTanks 5 жыл бұрын
dramoth64 can I go rimless on a 75 gallon glass tank?
@gohil_yajur 5 жыл бұрын
dramoth64 is bracing necessary?
@jerml6136 2 жыл бұрын
Two One's Tanks did you go rimless on your 75 or find out info?
@dramoth64 2 жыл бұрын
@@jerml6136 I completely missed the question from way back when. But the answer is depending on the thickness of the glass. 75G is roughly 280 litres, so 10-15mm glass would be best. If you're doing a 75 long, I would definitely use bracing. But if it's a cube shape, you can get away with it being rimless.
@Zedong99 4 жыл бұрын
Okay the comment section is full of “I broke my tank” comments but here’s something different to make you feel a bit more motivated to do it... I did break my tank a little bit too tho lol but actually it’s not that hard! Taking your time is the key to this! And also it is really cheap to do it, I probably spent like 30 bucks max but because I bought a rotary tool, that helps with the corners A LOT!!! But yeah, just follow the steps, take your time and be careful! Gonna try again now that Petco is having the 1 gallon, 1 dollar sale lol
@brooklynbound0 3 жыл бұрын
Don’t buy from petco please, they neglect their animals and don’t actually care about them.
@probablyabouttoargue3264 3 жыл бұрын
Here’s something different to make you feel a bit more motivated, I did break my tank 10/10 hands down best review ever of a project ever .
@stereosympathy 7 жыл бұрын
Thanks! I was literally just walking out into the garage to take the rim off my first tank when I got this video notification. Your explanation on bracing has dispelled some of my nervousness about my 10 gallon tank falling apart after I take the rim off :)
@AQUAPROS 7 жыл бұрын
+stereosympathy yay for perfect timing!
@wyzemann 7 жыл бұрын
This was a spectacular demo. I'm not ready for this technique as of yet, but I love the education. Thank You, AQUAPROS!
@coopermccom2316 4 жыл бұрын
My heart sunk when i cracked my tank doing this
@draco4914 4 жыл бұрын
Happened to me too. I have 2 more tries lol.
@matthewmaca6675 4 жыл бұрын
Cooper McCom same. I just siliconed the piece that broke off back
@boloradoanthony6130 4 жыл бұрын
Same, just a like a really large chip, but either way I started over. That can be my new quarantine tank😂
@MegaZidzid 4 жыл бұрын
put few drops of acetone- nail polish remover, to loosen the silicone first.
@probablyabouttoargue3264 3 жыл бұрын
You guys do know you can heat up a knife and just melt slits in the plastic and pull it off.... Sure you might have to scrape but not as hard....
@davidrozo8094 7 жыл бұрын
great video! I love rimless tanks. Just fyi you can wet the blades to remove the silicone a lot easier I usually just use a little bowl of warm water. thanks aquapros
@PresidentCarter1217 7 жыл бұрын
I did this on a 5 gallon and after step 1 the glass cracked
@billnye4708 3 жыл бұрын
😂😂
@jasonuscg 6 жыл бұрын
Use a pizza cutter, seriously.
@killhamtaro1514 7 жыл бұрын
hey buddy. you can use a proper glazing knife and you wont have to worry about putting stress on the glass. they look like pizza cutters. i use them when cutting glazing on glass window packs when i service vinyl windows.
@cathe-2179 3 жыл бұрын
Why are all the rimless tanks so expensive
@tanshengyang7344 3 жыл бұрын
They are more expensive because most of the rimless tank have thicker glass.
@scottwpilgrim 5 жыл бұрын
I usually heat up a box cutter blade and cut through the rim on opposite sides.
@matarese2868 7 жыл бұрын
Definitely gonna try this on my 5.5 gallon shrimp tank, just got some giant hair grass in for that tank too
@AGENTSIXTY9 7 жыл бұрын
Did this on a 2.5 gallon and when I was on the last corner it cracked
@malachigrey4895 6 жыл бұрын
the glass on those is paper thin
@mikena8519 4 жыл бұрын
even three years later this was good to find. longer video explaining all the steps very clearly - yes. but the extra explanations help with any nervousness of some of your diyers out here. thanks for the extra bracing steps too... you make it look easy :)
@benjaminrapp7418 3 жыл бұрын
This guy should do radio! Excellent speaker and very clear voice.
@Jameson77777 7 жыл бұрын
Not sure I would trust doing this for a tank inside the house. Maybe one out in the garage & cement floors. Lol
@royflacko6531 4 жыл бұрын
Have the same tank for 3 years no problems yet going rimless
@laughingc0w 5 жыл бұрын
If I keep the bottom rim, do I still need a brace?
@bengeorge4180 4 жыл бұрын
would a heat gun help with this?
@ProdByAce Жыл бұрын
i have a 75g can i remove the wood rim if its already sufficiently braced in the middle the glass seems well thick enough
@chipi1972 5 жыл бұрын
I'm going to do this to my 10 gallon. I'm going to brace it In the middle like in the video but I'm also going to add little triangle to brace all 4 Corners.
@scottwpilgrim 5 жыл бұрын
Cool.
@jonathanramirez1809 4 жыл бұрын
How'd that go?
@markholthouse88 4 жыл бұрын
Just did it on the same tank, works like a charm. Used a hard plastic scraper normally used for putty and wall repairs and it worked really well. I am hoping your statement about not needing a brace support is still accurate because I’m going to put some water in without it🤞🏼. I did leave the bottom rim on so I’m hoping that adds strength. Thanks for a rad video!
@andremartinez418 2 жыл бұрын
So is it still good without the brace?
@kelsibwells432 6 жыл бұрын
There are just so many do-it-yourself projects out there these days and a ton of videos I subscribed because I just have to say that you have impeccable taste I really like the way you do your stuff and you have an eye for detail that a lot of people lack or give unnecessary detail
@dkstacker 3 жыл бұрын
Easy peasy! I removed the rim within 5 minutes by first adding an ice cold water, drain the water, then add boiled hot water. This causes the silicone to expand and loosened up the rim. So easy!!😛
@ebenoid6643 Жыл бұрын
If you cut the corners first it comes off a lot easier. Mine was naturally cracked haha the trick is peeling plastic off without the plastic breaking.
@snufalufagesXI 7 жыл бұрын
if you heat the paint scraper it will easily cut through the silicone
@802sti 4 жыл бұрын
I removed a Zoo med sliding trim. It was plastic coated foam, so it came off in chunks, but fun to do. I did cut myself on the glass when i went to clean it. So i put electrical tape on the edges. I was going to anyway, as i was trying to fit a new cover on it. so for me it didn't need to be cleaned from the silicone. I only needed the painters knife and tape for tools. The glass did not break at all, but it is a large tank, i would say the same size as the video.
@mile_highexo9348 3 жыл бұрын
You should make a video on how to make lids for these. Or does anyone have an idea?
@NickSLZT 4 жыл бұрын
I made a 220 Marineland aquarium rimless the same way. Very nice video by the way.
@odycastro777 4 ай бұрын
try heating with a hair drier to make the silicon sealant softer and easier to remove.
@Paul-044 Жыл бұрын
Clever idea. I should of done this before I spent $320 dollars on a Landen 30 gallon rimless aquarium. But I have to say I'm really glad I bought it.
@peachpanda96 3 жыл бұрын
I got a lil adhd and started removing the rim of a tank I’m setting up..had to come check a video to make sure I hadn’t done something terrible
@wellsryrye 8 ай бұрын
The backlash is real haha. I converted a 20 long into a rimless. It bows little bit. But not serious enough to worry about. But I am glad I am not the only one who does this haha
@JunkTrunk11 6 жыл бұрын
I saw another one of these where the guy was using a hot knife. Creative and effective.
@Joestacemazjojo 5 жыл бұрын
I respect how at the end he pushes you to go get others opinions as well, on how to do this same project and others. It sucks how these guys putting up videos trying to help us have to say such things to cover themselves from all the negative replies they expect to come. Great job, and video, as always very educational and helpful. Off to do my own now
@Ucceah 6 жыл бұрын
scraping off silicones is easier on you and the blades, if you wet it with a little sopy water and a sponge.
@alexkaswan8435 6 жыл бұрын
now i have a broken tank YAY
@dominicreyes7629 5 жыл бұрын
I feel u
@kb2825 3 жыл бұрын
When you have a large tank the rim is very important . I have a 75 and the upper rim snapped in the middle and now the tank is bowing out. Either new rim or discard tank was my option but im interested trying to save it with adding my own structure
@chrisloya6988 2 жыл бұрын
Thanks for the tips, I'm going to do this on a 20g. My advise for the razor blades, try using blades for cutting carpet. Imo, their much more sharper and last longer
@sergiomagana7538 5 жыл бұрын
Do I need to brace my 29 gallon tall, I just recently removed the rim.
@Dirtyboot 3 жыл бұрын
I found this video after doing it myself on a 5 gallon nano. Use a good knife (instead of a putty knife) and cut up through. After that the pieces come off like nothing. Took me 15 minutes doing it my way.
@StainedBrain 5 жыл бұрын
I have a 10 gallon from Petco that I wanna take the trim off of it. Will it break easier? Like are Petco ones poorly made?
@billnye4708 3 жыл бұрын
Tearing apart my 55 gallon making it rimless ! I have to pick up some acrylic to make a brace other then that this was pretty easy !! Take your time !!! Be careful I sliced my finger wide open on some acrylic!! Be done in 3 days hopefully
@nubnub9635 3 жыл бұрын
Acetone for the thin stuff left after a run with the razor. Give it a try if you're still in the rimless game.
@binskins1006 3 жыл бұрын
Did it for the first time, looks great cant wait to set it up👍
@andrewhirilall3324 6 жыл бұрын
Awesome Video! Just wondering where you got the glass strip to brace the tank, and what type of silicone do you use?
@sammyers1889 4 жыл бұрын
I’m wondering where I’d get glass for my 50 gal tank to brace too
@bear_mcpike5353 4 жыл бұрын
Hey Mike. Thanks for the video. Quick question; have you ever de-rimmed a 75 gal tank before? Would you recommend? I note that in this video you mentioned doing a 55 with a brace, but I'm not sure if you were just referring to 'bracing' or if you meant de-rimming. Thanks. DM~
@jaiqiliu.4602 5 жыл бұрын
thanks for the video ,i just finished rimless my 10 gallon,and will do for the 20 later.
@bettabegoodjr2104 5 жыл бұрын
20tall you think I could do rimless?
@jaiqiliu.4602 5 жыл бұрын
@@bettabegoodjr2104 i was planing to do the 20 gal long not the tall one .i guess it is ok but not sure. i think the taller tank needs more thick glass to be safe .
@hidychui9873 5 жыл бұрын
What is the mm thickness on these Petco rimmed glass? I just got a 20g high and now having 2nd thoughts.
@josevargas8034 6 жыл бұрын
How's the 20 long timeless doing?? I'm thinking of doing this to my aqueon 20 long. I have a broken 10 gal aqueon also that I could cut a brace out from to use for the top of the 20L. I'm still up in the air about it. Suggestions?
@danastanford3128 3 жыл бұрын
Have you ever done this to a 55, I have started this project and now I’m a little freaked out
@VinylUnboxings 3 жыл бұрын
It'll probably bow an extra 1.5 inches
@probablyabouttoargue3264 3 жыл бұрын
And just like that I’m no longer interested in doing this even though I have a better method than scraping it with metal... I know glass can bow but I’d never be able to sleep 😂
@sal9842 5 жыл бұрын
I really like how you explain the process thank you
@Deb1Gilmore 6 жыл бұрын
Just came across this video...Thank You!!! I, personally, dislike the rim at the top of tanks. Bottom doesn't bother me too much. Crazy, I know!
@cooleo9853 6 жыл бұрын
I agree
@kendrac5191 5 жыл бұрын
Im the same
@kindmama 3 жыл бұрын
Thank you so much! I brutally ripped both top and bottom rims right off our 5 gal because I wanted a clean look for a terrarium. Then like magic, our missing frog whom escaped said aquarium 4 months prior appeared in the basement. We assumed one of the 3 dogs or 2 cats got her but nope, she was found hungry n dehydrated but otherwise fine. So now I'm frantically putting together that 5 gal rimless and worried about the bottom rim being necessary for structure. ^lots of words, but mostly just thank you.
@ivyv4875 3 жыл бұрын
Okay but now how do I get the razor scratches out :/
@EIKON_BroadSparty 7 жыл бұрын
Great video, Thanks! I got a 46 bow front where the top brace broke. I removed the top trim and plan on adding a glass brace in the center. Is bracing needed on the two sides as well?
@AndrewAment 4 жыл бұрын
I am glad more and more pet stores now sell rimless aquariums.
@XcZuNiTy 5 жыл бұрын
Actually heating up the top rim with a heat gun or hair dryer loosens up the silicone so it’s easier to remove and scrape off.
@ericmiller2582 4 жыл бұрын
so doing this with a 55 you think i could get away with two braces on the sides and one in the middle?
@crtr7623 2 жыл бұрын
I tried this with a 10 gallon but it ended up cracking the side panel. So just be careful with aquariums with thinner glass.
@mr.smithskitchen3224 7 жыл бұрын
that was really cool, I may try that on one of my 29g. thanks for sharing this with us.
@jasonsgamingcorner6094 5 жыл бұрын
Where would you recommend getting the glass to brace the tank? I am setting up a old 30 gallon I had laying around and like the idea of rimless.
@bosniakedisniksic 5 жыл бұрын
Home depot, lowes, menards, ace hardware, hoods, etc
@MichaelMulin 7 жыл бұрын
who else LOVED the idea and thumbs up BEFORE WATCHING!!!!!!!
@3D1ofakind 4 жыл бұрын
I wish I watched this video, ended up cracking a fish tank
@lorib1696 5 жыл бұрын
I'm considering doing this with a 45 gal corner pentagon tank. How would I brace that? Diagonally from the center of one long side to the center of the other long side? Will the three short sides try to bow as well?
@ryanbeharry5636 2 жыл бұрын
I’m making a 90 gallon rimless tank, the glass is 12mm thick. Do you advise any suppose?
@michellegianni5881 Жыл бұрын
I want to do this to a 40 breeder. How many braces do I need to add? and where do I source the glass for the braces?
@MoreChannelNoise 6 жыл бұрын
I actually prefer the rim especially on the bottom where it hides the silicone.
@suzyq5367 5 жыл бұрын
I like the rim too. It looks more finished. The reason for the rim is to support the glass panels together.
@CaptainSavageAquatics 7 жыл бұрын
Great video! I found it very informative!! Keep up the great work!!
@Solidus2 2 жыл бұрын
I have a 20 gallon long is there a link for that glass brace and silicone?
@victorgerhardt1504 3 жыл бұрын
Use a hot knife to cut a 4 to 6 inch section. It will come right off?
@MrMills-rs4zg 6 жыл бұрын
is it okay if the corner flex a little when you apply pressure?
@theflannelflyer9437 7 жыл бұрын
Thank you so much mike I was Loki g for this for the longest time I am derimming a 20 long right now! Like you said though every tank is different as I found out mine was absolutely the worst (R.I.P) sliced my thumb open with a paint scraper but it looks nice hope you check out the tank coming soon!
@Red_Pilled_Woman 7 жыл бұрын
Great video! I so want to do this! My water is exceptionally hard and the rim hides water line. Blades don't even touch it! Bar Keepers Friend works like magic but I only use it in an empty tank. Ideas to remove stains around fish?
@harv0la 6 жыл бұрын
There's nothing worse than having the same problem as someone and seeing that they found no solution :(
@heyabbottdog 3 жыл бұрын
Forgive my ignorance, but wouldn't this have been made easier with the assistance of a heat gun?-maybe I'm wrong.
@chasetrimble8567 5 жыл бұрын
Where do you get the glass pieces for the braces?
@gwrulzmylife 2 ай бұрын
thanks 😊
@ejclydegod 5 жыл бұрын
I bought a 30 gallon tall, frameless aquarium by Aqueon. It doesn’t have a rim on the top, but it does have it on the bottom. Do you think it would be safe to remove the bottom rim?
@feminista89 6 жыл бұрын
I had almost the exact same tank as you, and I realize you said all tanks were different, but this proved to be near impossible.
@aboredcouple8321 7 жыл бұрын
Great video. I have a question, can the brace be plexiglass?
@jerml6136 2 жыл бұрын
No! Plexi absorbs moisture & warps.
@devachapman6777 6 жыл бұрын
Question. for a 40br would you add 1 center brace to the middle or 1 on each end ? like a modified Euro brace? enjoying for videos.
@BlessedWithPets 2 жыл бұрын
Where can I get the glass cut? I need 3 pieces for my 55 gallon. I got the tank for free which is amazing but the rim was destroyed and I had to remove it. Please let me know because I’d like to order it pretty soon. Thanks for the video! Great quality!!!
@Kopsu87 7 жыл бұрын
it seemed like the bottom rim leaves a gap under the bottom glass. is that normal? my tank has this sort of rim as well and im scared the bottom can crack.
@Emily-wp3tu 6 жыл бұрын
Kopsu I know this comment was from months ago but did you ever set it up? I’m taking off the rim of my 55 gallon and noticed the gap too. Not sure if I should silicone the gap to be safe.
@hakman239 2 жыл бұрын
What about scraping off the silicone on the sides where 2 edges of the glass meet is that ok?
@bettabegoodjr2104 5 жыл бұрын
Was that a 20gal tall rimless aquascape at the end of video you did?
@kye88 7 жыл бұрын
for helping with the removal of silicone acetone will help.
@dontreadmyprofilepicture3768 6 жыл бұрын
I have to take off the rim because the clamp from the lamp I bought didn’t fit the tank with the rim
@kg2nc 7 жыл бұрын
You did a really good job removing the rim. Lots of good info. Thanks
@AQUAPROS 7 жыл бұрын
+Ruben Thanks Ruben!
@salamannader 5 жыл бұрын
I would really like to do a rimless 5 gallon, but I have a cat. Do you recommend something specific for creating a glass lid? What mechanisms should I use for it to rest on top?
@notmyrealyt2443 3 жыл бұрын
Take your time and be carful round the corners
@jacksonwuepper245 7 жыл бұрын
I'm taking the top off of my Fluval Edge 6 gal. Do you think it will make the tank unstable or anything or will it be fine because the tank is so small?
@shadybreezy3103 7 жыл бұрын
I'd be so afraid to try this!! But great video, I appreciate your attention to detail.
Дима Масленников
Рет қаралды 6 МЛН