Make your own RC Car Battery Pack or Repair NIKKO Ni-Cd 6.0V-620mAh

Рет қаралды 583,423

10 жыл бұрын

Replacement 1.2v (6v total) battery pack → amzn.to/2xwS2HP
You can try to fit it back into the case or just wrap electrical or duct tape around it. But it may not fit well in your charger if you do that. This pack I rebuilt was a Nikko Ni-Cd 6v. But you can do this with most others. You can also just buy a new pack, but it's fun to crack stuff open and see how things work.
SUBSCRIBE→ kzfaq.info?sub...
•••••••••••••••••••••••••••••••••••
For those who offer to buy me a drink, thank you! I have Venmo and CashApp.
Venmo: AdamCash
CashApp: $AdamDIY
•••••••••••••••••••••••••••••••••••
Business Inquiries: please email:
/ adamdiy

Пікірлер: 124

@TheKBYERLEY 3 жыл бұрын

Thanks for the tutorial. I was able to refurbish a TMH Flexpak 7.2 v used with a Tony Hawk Skateboard RC toy. Apparently the battery pack is no longer manuals yet and I didn’t trust the ones on EBay. I used solid copper wire and flattened it with a hammer for the conductive strips between batteries. The case is a pain on this particular battery pack, but it can be done.

@bryantjacobdelacruz 10 жыл бұрын

can u make a video on a rc new bright land rover model 2022BS becasue i lost my battery and i wanna know if u can put anything else bassically "improvising"

@KedarKulkarni1 7 жыл бұрын

Hi many thanks for sharing your knowledge through video however, I have seen many videos on this topic but none of them explained how do we charge those packs which power adapter to use. is it ok to use any 12v power adapter for charging the batteries or we need specific ones. all these questions remained unanswered and kinda discouraging to moving forward towards making a battery pack. it would be really great if you can answer them either here or by extending your video for this topic.

@matyaskorvin8537 9 жыл бұрын

hello, I want to ask if the batteries are charged when they are finished

@sheetalgoel2004 6 жыл бұрын

Hiii Can we charge this batteries with the charger and this batteries r recharable?????

@minezgio3175 9 жыл бұрын

my rc car has 4.8v Ni-Cd can i replaze it with 7.2V or 5.2V Nc-Cd?

@022lukas 4 жыл бұрын

Any way to make charger for this kind of battery pack?

@Frankfrank9191 9 жыл бұрын

Danke für den Tip - ich wollte den Akku schon wegschmeißen, aber jetzt ist wieder alles ok ! Viele Grüße aus Deutschland !

@AdamDIY 9 жыл бұрын

Frankfrank9191 Not a problem! I'm glad to be of help.

@shawnearnest6950 7 жыл бұрын

how do you do that

@anthonymina8398 8 жыл бұрын

Will the battery wont drain the power if you solder it? I think it will.

@steveclough6794 5 жыл бұрын

i just altered the batteries compartment soldered on deans connectors and run the rc on lion packs much more power and much longer run time

@user-uu2uc3ls1x 2 жыл бұрын

Хорошая работа.(good job)

@hanantahir4181 6 жыл бұрын

This is nice is that rechargeable?

@puddingtane4827 6 жыл бұрын

How do you change a stunt monster truck RC car or truck

@creators6874 5 жыл бұрын

Hi Please can you make a vedio about how to make 1.2 v charger

@kev6648 6 жыл бұрын

hi i just bought a 4.8v 700mAh rechargeable Nicd battery but i intend to use only maybe 2 to 3 months later can i just leave it as it is then only charge it after 2 to 3 month later. will the battery spoilt? And can i used a handphone usb charger to charge example samsung charger ? thanks

@graemekann4739 3 жыл бұрын

Hi would this work with nikko vaporizer

@marvoncarmichael1281 10 жыл бұрын

is that rechagerable

@tiagoramalhais5493 4 жыл бұрын

Just tried it with 1000 mah IKEA batteries and it works but I feel the power is reduced, I might try with higher mah, didn't solder anything just used aluminium foil for the connections

@sujithextremexu 4 жыл бұрын

i am trying to use 1000 mah instead of 700mah. it is not working why?

@denniscabaljao2273 3 жыл бұрын

What kind of battery are those?

@Giannior21 3 жыл бұрын

What type of battery it takes inside?? Pls answer me

@Robbnlinzi 6 жыл бұрын

So. Silly question. I need a 700mah 7.2v pack with SM connector. Can I use a 4.8 volt safely?

@abhinandansharma9451 7 жыл бұрын

Hi there can u pls tell how to fix my problem I have an rc supersonic monster truck 1/12 size I bought it few days back It's new It worked superb for the first 4 times When I charged it the next time it got too hot and the adapter melted but I suddenly reached and switched off The charger now works properly but I don't know what happened with the battery When I installed it in the car The car don't run properly and works only for 2-4 min even after charging Pls tell It doesn't catch the remote signal and battery not works properly Please tell me how to solve this problem Please reply

@djnoyon 10 жыл бұрын

Hi there thanks for your video. Can you please tell me where I can fund this small welder you used and what is the actual name for them? Is it copper cable you used? It was clearly under-stable for one part you welded but other side of the battery is not clear I mean how did you connect all these 5 batteries?

@AdamDIY 10 жыл бұрын

The welder is called a "Soldering Iron" and the copper is actually solder wick. But you can just use any cheap wire, I just had that laying around at the time. You just connect the positive side to the negative side of the next battery. So instead of having all of the batteries pointed the same direction, you need to flip every other battery.

@DISHENGANESAN_36 2 жыл бұрын

9.6 volt how many hours to charge this battery?

@lavidaenbolas 6 жыл бұрын

Thanks

@Naruto_Uzumaki_Sonu 3 жыл бұрын

0:34 what is the name of yellow chells please reply please

@sngaming5631 10 жыл бұрын

good video but would you know how to change the spring in the battery cover ....it has seperate batteries put in not the pack.pls help me

@dpvideo7821 4 ай бұрын

Hi Adam, thanks for this tutorial - quite helpful. Just one important question - how do you open (dismantle) the plastic pack. It seems it is glued and I am afraid not to brake it? Thanks again. DP

@olivierdella3875 8 жыл бұрын

Hello, After ponssage and before welding, you apply a leg. Coult you tell me what that leg ? In advance thank you.

@AdamDIY 8 жыл бұрын

+Fab ien I'm not sure what part you are talking about but I think it's the metal lead that was part of the original battery case. Your's may be different.

@syedmaazuddin2217 8 жыл бұрын

he is telling about the grey thing that you applied before soldering i think its flux

@karinavernon6428 8 жыл бұрын

Hi, what are the voltages of each individual battery please

@seregahv7531 7 жыл бұрын

Аккумуляторы имеют 1,2 v.

@bernardosicarelli6974 3 жыл бұрын

So, I want to ask something... Is there a method to open without damage the covers? Something to get the old ones to replace?...

@griffo5 3 жыл бұрын

You have to break it to replace it, ill be posting a video up soon on how to do it. And converting to nahm.

@nadirabegum3137 3 жыл бұрын

Remote control?

@RainBringer 8 жыл бұрын

Hello! It's a great tutorial, thank you. But I have a problem: I can't open the battery to replace the inner cells! How is it opened? Glue? Clips?

@AdamDIY 8 жыл бұрын

Almost always the case is glued shut. You will need to carefully split it open and then glue it back together when you are done.

@RainBringer 8 жыл бұрын

I've tried to open it with a knife (since the gap between the halves is too thin for a screwdriver), but the plastic breaks where I push the knife and it doesn't seem to do the work

@RainBringer 8 жыл бұрын

+Rain Bringer I've managed opening it. With a very thin and heated knife I've carefully melted the glued stitch between the two halves.

@chhoteali573 9 ай бұрын

You are best brother

@ghostxd1277 6 жыл бұрын

Listen bro my truck is mouse potato crawling monster truck with 700mah and I want to extend it to 2000mah so will 2000mah batteries will damage my truck?????

@avig7462 5 жыл бұрын

It will damage it but after using it for some time

@wicho99w99 4 жыл бұрын

AVI GAMING why would a high capacity batter hurt the rc car? I thought the only thing that matter is the voltage

@danielstermark8752 4 жыл бұрын

Nice vide question.. I have a nikko vaporizer.. it uses the nikko 6v battery pack.. but after some year, it could only hold charge for a few minutes.. so I opend up the box and put in standard alkaline batteries, hoping to also get a little extra speed.. but the car just moved slower than before, almost stood still.. so I got muself some new Duracell 1200mah rechargeble and put them in the pack insted.. a little better result, but car just moves really slow... Any idea why that is?

@ericksanches.s 9 жыл бұрын

I could use 1.5v batteries?

@maarabsultan2565 4 жыл бұрын

Yes

@trsdcreation9504 4 жыл бұрын

you make 3.6v battery for rc toy

@kazi9608 8 жыл бұрын

What are those cap things with wires that you can put on batteries?

@AdamDIY 8 жыл бұрын

Are you talking about the copper wire and solder?

@kazi9608 8 жыл бұрын

+AdamDIY no its not in the video but its black has two wires at the back of it and you can put it on those rectangle batteries

@kazi9608 8 жыл бұрын

+AdamDIY also how would you turn this on and control the rc?

@rosevicente8621 7 жыл бұрын

great video thanks huge savings yay

@1sThatreallyK2 6 жыл бұрын

Are they the original battery’s

@septa814 Жыл бұрын

Mantap bang 👍👍👍

@simonp7095 3 жыл бұрын

How u open them with hammer or sharp knife

@TheNeuman 3 жыл бұрын

I would Dremel them around the edges.

@DIRTYDOO 9 жыл бұрын

Why not 2000mah they are cheap and last longer

@maniyarirfan9717 5 жыл бұрын

Pictures about San Bernard Shaw charging in Agra

@mags3659 9 жыл бұрын

i use 9.6v

@flux6826 8 жыл бұрын

i m not able to solder the wire on the cell. the solder do not stick on cell. why? plz reply

@AdamDIY 8 жыл бұрын

rough it up with a little sandpaper and also use flux

@seregahv7531 7 жыл бұрын

У меня тоже, даже с кислотой с трудом паяются контакты на аккумуляторы. Таблетка аспирина или ацетилсалициловой кислоты могут помочь.

@illynoizzz 7 жыл бұрын

Serega Da чел на англ помимо флюса упомянул наждачку, чтоб слегка отшкурить поверхность. не знаю, у кого как, у меня идеально сработало с обычной канифолью, даже без этого вонючего аспирина )))

@seregahv7531 7 жыл бұрын

А я парюсь, даже когда зачищаю. В основном пальчиковые аккумуляторы совсем не хотят зауживаться.

@grahambate3384 8 жыл бұрын

y didn't u buy big mAh battery?

@illynoizzz 7 жыл бұрын

Why do you suggest to use only the same Ni-Cd batteries? IMHO 1. Ni-MH are much better because of no "memory effect" 2. You can assemble new battery pack using batteries with much more capasity: Sanyo (Panasonic) 2500 mAh or Ansmann 2850 mAh for instance instead of these ones noname 600 mAh. Just imagine, you can increase the running time up to 5 times :) What do you think? P.S. I got more simple case. My son's Niko car is powered by 4*AA batteries, so it's 4.8V. So I bought the Xiaomi 10000 mAh powerbank which supplies with stabilized 5v. Then I solder the USB cable to +/- on the car and made a place for this powerbank inside the cockpit. So I was amazed when my son played all day long with this car and then my wife also chaged her smartphone in the evening also from this powerbank. LOL

@TonyTapay 7 жыл бұрын

I imagine he's using NiCd batteries because the pack goes with a charger that is built specifically for NiCd batteries.

@illynoizzz 7 жыл бұрын

Tony Tapay take a closer look at typical ni-cd, ni-mh chargers specs: i.e. Lacrosse BC-700, Maha Powerex, etc. They have pretty much the same charging logic for both of these types. So it doesn't matter for a charger what to charge: ni-cd or ni-mh.

@TonyTapay 7 жыл бұрын

That's good to know.

@johndow1974 7 жыл бұрын

Not entirely true, there are differences, e.g. cut off V delta is different for once (5mV vs 10mV as I recall). Also Ni-Mh are more fragile when it comes to overcharging. batteryuniversity.com/learn/article/charging_nickel_metal_hydride You may still give it a go...

@Manuel9x9 6 жыл бұрын

You know nothing about batteries. Higher amperage force to charge longer and higher.Nikko charger is not build for ni-mh and those batteries weight much more than ni-cd

@gailbabcock6207 4 жыл бұрын

but my charger won't turn on!!!!!!!!!

@ravinderravi1980 2 жыл бұрын

Sir I want Ni- cd battery

@sreckod2269 9 жыл бұрын

Hi, did you damage the batteries? In local store they say tac welding is only option, but since I saw you I think soldering is good option. I plan to use 5 x 1.2V 3000mAh NiMh batteries. Do you think the charger will cope that?

@AdamDIY 9 жыл бұрын

+Srecko D No the batteries were not damaged. I don't know why you could not solder them. Maybe someone else knows and would care to comment. I'm not that savy on what mah specs you need to keep to.

@Skidtire 9 жыл бұрын

Mah stands for capacity, foe replacing the cells on your pack you will want a higher Mah then the ones you are replacing, hope this helps

@thomaskhensen 8 жыл бұрын

+Srecko D Hi, im about to buy new batteries. Did it work for you with the 5x1.2v 3000 mAh NiMh batteries? and is it possible to charge them with the charger?

@3DxPOD 2 жыл бұрын

It's not a good idea to heat up the batteries, is what I was told.

@CheapCheerful 2 жыл бұрын

@@AdamDIY From what I can tell, soldering these little NiCDor NiMH batteries isn't a problem for personal use, so long as you don't linger too long with the heat. The reason spot welding is preferred is that people are usually connecting 18650 / Lithium batteries together which die very quickly with heat (or much worse... boom!).

@WavoGiveaway 9 жыл бұрын

Hello

@Mobile-Game-Magic 7 жыл бұрын

Good Job ;)

@codymattes9934 9 жыл бұрын

can you make one on making a 9.6v battery or fixing a 9.6v battery

@terminashunator 8 жыл бұрын

+Cody Mattes Same method, except the batteries will be soldered end-to-end. Just observe how the original one is made.

@codymattes9934 8 жыл бұрын

+Electro_Leet ok thank you i tryed that and before i put it in the rc thing i made ot for it was working but then it did not work

@codymattes9934 8 жыл бұрын

+Cody Mattes and also did you have to use soldering past or not

@terminashunator 8 жыл бұрын

I personally use Flux and silver solder. Home Depot carries it.

@wazirbains4206 5 жыл бұрын

make 27 mah battery cHrge within phone cHrger

@trolencio-ev7yg 4 жыл бұрын

Dude, ¿how I open the batery pack

@user-rn8zt1tb2i 4 жыл бұрын

Don’t use button tops, they won’t fit with solder on top of them. USE FLAT TOPS

@viralshah1201 3 жыл бұрын

It's only your video I can able fix it

@ganeshjabhvgh1816 6 жыл бұрын

Not EPD

@ifeyanaroberts1094 6 жыл бұрын

i can't find the charger how can i get one or make one

@chiranjeevjain5660 5 жыл бұрын

Me too same help me

@khushi3508 3 жыл бұрын

Kya

@tifanychavez4998 4 жыл бұрын

here's a few things for fixing a car battery

@miltonbarahona8105 7 жыл бұрын

HELLO, PLEASE, I HAVE A New Bright CAR WITH 6,4V Lithium Rechargeable Battery.....CAN I USE 7.2V 2200mAh NI-MH Rechargeable BATTERY? OR Ni-cd 9.6v 2400mAh Rechargeable Battery? CAN I USE 7,2V OR 9.6V? THANKS FOR YOUR ANSWER.

@seregahv7531 7 жыл бұрын

Всё делается в китайском стиле! Пишут одно , а на деле другое! Написано 6V ! А лепится 5 батарей! ??

@ivandurov6751 5 жыл бұрын

они по 1,2 вольта

@user-uu2uc3ls1x 3 жыл бұрын

так 5х1,2V=6V

@seregahv7531 3 жыл бұрын

@@user-uu2uc3ls1x а, понятно аккумуляторы. ))

@superdesu2799 9 жыл бұрын

it reads 7.5 because you're using five batteries

@mutrcouk 5 жыл бұрын

5 x 1.2V = 6V

@alexschomers1796 3 жыл бұрын

Is his house haunted? His sand paper just slides away while hes using both hands to solder

@homerdustin9687 7 жыл бұрын

how many hours to charge 700mah 6v to the 250mA output charger? help me guyyys

@homerdustin9687 7 жыл бұрын

heed answer here

@homerdustin9687 7 жыл бұрын

need

@AnilKumar-ys4ub 7 жыл бұрын

1 hour

@armyjaictin6147 6 жыл бұрын

700√250x1.4= answer is in hour

@knockbitzhd 5 жыл бұрын

@@armyjaictin6147 how about AA2000mAh 4.8v with 250mA output charger? kinda wanna upgrade my rc battery need also an answer here even is 9 months ago hopefully u answer XD

@royalnil5806 4 жыл бұрын

first you learnt solding then try good video

@0hSh00t 8 жыл бұрын

No need to open the pack with a hammer, LOL! Glues are chemical bounds, that can be dissolved by the appropriate 'chemical' (some by water...) For this one I first tried rubbing alcohol (great for loosening hot glue bonds), which didn't seem to work (being an impatient guy). I then tried Tamiya Lacquer Thinner (search Tamiya 87077 on eg eBay). After a couple of minutes, a little force with a knife split the case, without any damage. Otherwise a great guide, tx!

@HariKrishnaDara 7 жыл бұрын

Did you just dip the batterypack in the thinner?