TIG Welding Basics - SIMPLE Tips & Tricks How to Get Started

No video

TIG Welding Basics - SIMPLE Tips & Tricks How to Get Started

Рет қаралды 220,922

Күн бұрын

On this episode of Make It Kustom, I go over the very basics of TIG welding. If you want to start TIG welding steel, this is for YOU!
Thanks for your support!
Merch store www.japhandsku...
Gloves from this video butlerscustoms...

Пікірлер: 494

@toms8868 Жыл бұрын

I’ve been watching your channel for several weeks now. I’m a 57 year old retired electrical engineer with 20 years military service USAF. My father owned a body shop in Louisville, KY and I’ve been working with collision repair, restoration and refinishing off and on since I was a kid. My wife and I live maybe 9 miles from Lake Michigan in a small lake community (Saugany Lake) in Rolling Prairie, IN. I teach a flight and aviation program in our local community high school part time (3 hours a day….somebody’s gotta do it😜) and have my own small, home based company, just me, restoring classic cars. I’ve been doing this off and on for about 4 years now, but as I’m now easing into retirement, I’m doing much more. I’ve populated my small shop with what I need for many years. As I gained more room, I get to buy more stuff!!!Just now starting to form metal with the English wheel, planishing hammer, metal brake, etc. I’ve never used these before, but I’m making great progress with your help and others on KZfaq. You are a very talented young man and I’m really enjoying learning with these new tools, tips and tricks. I’ll chime in every now and then and very likely plug in with questions. I’m a MIG only guy, but I should start playing with my new TIG this coming week. Just watched your latest TIG video and I can’t wait to get started!! Keep up the great work!! Best of luck to you and your family and circle of friends. It looks like you’re enjoying life to the fullest!! Now that I’m retired (kinda), I’ll be sharpening and executing my skills to reintroduce classic machines back on the road. Best Regards, Tom Savchick

@morgansword Жыл бұрын

I think of Karl as a young talented and caring person who really could teach something like this to just about anyone who is willing to pay attention. I am ex military, a ground pounder who served in 66, 67, in Nam. I did get to play as I call it in the motor pool when stars aligned for me. I went as a kid working for dad, drafted and then to the woods again for a short period of time. I hope I'm not boring you but reading your comment really peaked my curiosity as the three "W's" bounced around in my 73 years head. Cutting a long long story shorter, my experience in mechanics as I started working on the islands in southeast alaska got me out of the brush and into a job that became almost a freedom for my life time of wrenching on heavy equipment. I would of probably got killed in the woods as I was recluse in setting chokers or any of the jobs related in logging. I wasn't trained persa but just felt comfortable in mechanicing. As a mechanic, it requires in small companies a broad range of different skills, as in fab work. I just loved to create something from junk to a working solution. Logging eventually did slow down in the many areas I worked at, won't bore you all the reasons I eventually went to working on customer vehicles in a mechanical shop to finally getting a small shop in my small hometown. Okay, I discovered youtube and it is probably the last good reason to feel like I accomplished something in life. Helping someone who was a lot older than myself in 05 got myself crippled and out of a chance to enjoy the one thing I still love. Crippled bad enough to never walk again and even the use of my arms are really limited. When you get older, time can also be a limit on your ability to crawl under cars and trucks to restore them.... heck, this is almost not me talking. I really just loved restoring my old trucks I had gathered up and fixed up for personal use mostly. The last failed surgery got all of my tools, shop, home, in 16. I almost lost hope except for people like Karl who still build stuff and I live out time through them. I watched everything I had go away for money for self insuring my health just trying to be able to still work. I have been a single man since many years ago, the wife said, I can not be alone and so you just work too much. Enough on that and so where I am going is just seeing others I can relate to still out there doing the things and wishing it were me. I really hope I did not bore you and question as to why reply to someones comment as a stranger. Loneliness is most the reason.... if you read all this and was not offended, I thank you

@MakeItKustom Жыл бұрын

Hey Tom thanks for your kind words I’m glad the channel is helping in your metal shaping journey!

@tinkeringinthailand8147 Жыл бұрын

Ditto Tom (I am 58), I even try to film some of my work and stick it on my channel. Like I commented, this video seemed to fill in a lot of gaps that other tutorials missed and taught me a lot. God bless :)

@tinkeringinthailand8147 Жыл бұрын

@@morgansword Isn't life wonderful Morgan; "Rollercoaster" or the raindrop running down the window pane, Who knows :)

@andreasmeerkamp8627 2 ай бұрын

What kind of TIG welder did you buy? Are you happy with it?

@michaelanderson3771 Жыл бұрын

Karl I have said this before and will say it again. You are a great teacher mate. So grateful for your tips and helpful guidance. Keep it coming brother.

@phoenixx_rising Жыл бұрын

Best TIG instruction I've ever seen. For a 60 year old DIY'er, this is exactly what I needed.

@nickcollins9403 8 ай бұрын

58 yrs old and trying here

@pibble3962 Жыл бұрын

This is absolutely the best break down of TIG welding. You are a wonderful teacher and artist. Thank you!

@papawheelie5835 Жыл бұрын

Who else noticed the way that the post flow was instrumental in slowing the heat soak? The same instant the post flow cut off, the discoloration from heat appears. Also, Karl, so glad you emphasized cleaning your weld materials to get better results. When it comes to more "exotic" materials such as stainless, or titanium, even aluminum to an extent, it's extremely important to have everything super clean..... and that includes the filler material.

@malcolmyoung7866 Жыл бұрын

That was a pretty cool effect, even for just the visuals…

@MakeItKustom Жыл бұрын

Yes absolutely critical especially in exotics. Ti is my favorite to weld. So satisfying lol

@thebeardedstork432 Жыл бұрын

Hey Karl, I retired from teaching (HVAC/R & Welding) almost three years ago. You are doing a fantastic job with these videos. You have the knack for teaching! Keep them coming!

@CKMAX Жыл бұрын

I live in the Las Vegas area and have thought about attending one of the classes you do with Christian however I must admit one of the reasons I have not attended is my lack of tig welding skills. Zero experience! Mig, yes....tig, no! I know at the end of the class the project needs to be welded together so I'm thinking I should learn to weld first. This video explains a lot. Thanks for all you do!

@MakeItKustom Жыл бұрын

No tig experience needed! The class is about the shaping. Some guys mig their tanks togetehr

@carlking6435 5 ай бұрын

Just the Info you need. No bla bla. nothing unnecessary.. Brought to the point. Got all information to start TIG in just a bit over half an hour. Will take me definitely 100 times more time to get the routines. Thanks for that

@Robert-il4pi Ай бұрын

Karl you are amazing. As an old trade school (TAFE) Engineering trades Teacher in Australia the clear simple language you use is very effective. I watch and like all of you shows. You are very helpful and encouraging, keep it up.

@jameslangford4748 Жыл бұрын

Absolutely beautiful teaching. I am a novice mig welder with a Lincoln 140 dreaming of the day I can Tig my headers myself. THIS is exactly the kind of video I need to learn from. You inspire. I APPRECIATE what you do so much. Thank you for sharing. You are so kind. I designed and fabricated a set of equal length fender headers. I just have to tig them. You just helped me get there ! I know I have a way to go but your kindness helped me start. THANK YOU !

@brucematthews6417 Жыл бұрын

I've watched a bunch of beginner TIG videos and I get a little extra from each one. This video was certainly worth the watch along with the rest. PIcked up a couple of new things. As well it reinforced some ideas from the others. So yeah, a hearty WELL DONE! The extra emphasis you put on the more important factors was great.

@bigmackstruckstop9213 Жыл бұрын

You and Brent make good teachers,I enjoyed your show.

@mikeanderson1139 Жыл бұрын

just watched this vid again and ready to give it another shot. I went to welding school a couple years ago and TIG was by far my weakest discipline. Maybe, old dog (72) new tricks, we will see .

@williammurfin6354 Жыл бұрын

Me old college teacher said to us " I can scream in your ear all day and you read every book written on Tiging the best thing you can do is burn metal". "Its all about time behind the arc." Mind you he said this whilst giving us a clip behind the ears with an old hard welding glove. We picked thing up real quick from him. Great teacher!!! I rather get slapped by his bloody glove than the pipe he smoked, that bloody hurt and the hot ashes!!!

@MakeItKustom Жыл бұрын

Holy! Lol times have changed lol 😂

@williammurfin6354 Жыл бұрын

@@MakeItKustom At college during lunch breaks we used to cricket in the hallway with a cricket bat and a lump of solid steel. Everyone wore welding gloves to catch a ball. But the sparks from it bouncing off the floor, walls ( if it didn't go thru it) and machinery. I think we were the reason for so rules coming in.

@MidYearMitch Жыл бұрын

Wow that’s a fantastic video! Ive been wanting to buy a tig machine. I took a short welding crash course class put on by my work and they just said weld and people struggled to figure out tig. I think those little exercises are incredibly helpful and I’m excited to get a tig and try them out.

@karlstehle8750 Жыл бұрын

Best welding teacher on you tube by far....thanks to the professor...I re-watch your videos over and over till I get it. Awesome experience!

@qivarebil2149 Жыл бұрын

"The best"..? Have You seen Jody at Weldmonger? Or Justin at The Fabricator Series? Karl is OK, but far from the best.

@Isadore123L Жыл бұрын

Excellent teaching video. Exactly what a person like me needs. Done some stick and mig, wishing on a low-cost tig but all the real beginner questions: how many amps should I buy and/or run; why thoriated or lanthanated; how thick of a tungsten; what grind angles & why; how much gap on arc; what's the first things to concentrate on as a novice. All those basic, basic things got very well covered. Elio was a big help as always with syntax on equip part names, video setup and camera shots. Well edited for cuts between view showing your hand technique and shaded camera shots to show arc and puddle. May want to go a shade or two darker to cut down camera glare so it shows more of the puddle ahead of arc and shape of the arc hitting the puddle, but your explanation about dipping ahead of the arc and how filler cools the puddle as the arc moves toward that added filler is precisely the sort of advice beginners like me don't always observe and I learn faster when given those details of how & why every part of the motion has purpose. Your talent for communicating the subtle and practical sides of your trade as well as remarking on your own preferences in practice is a talent all the best trades teachers possess. That talent is why I signed on as a supporter of your channel. The best trades teachers also love what they do, which is readily apparent in the results/progress of all your projects. Also, great when you show projects like your brother's Buick where all the friends got together to bang out a big project so fast by each contributing a talent where that person excels.

@herbcaldwell943 Жыл бұрын

I couldn’t have said it better !

@MakeItKustom Жыл бұрын

Thanks for your support Jim! I’m glad the information is landing 🛬 I’ll make sure some more Tig content comes out soon 🙏👊

@RicardoGarcia-104 Жыл бұрын

For an affordable TIG. Look into a primeweld TIG 225 It’s under 900$. But comes with a great set of reviews. Also look in the fabrication series with Justin. He has some beginner TIG welding video. That have helped me grow to be a much better welder Best of luck in the welding journey

@jimjones5469 9 ай бұрын

Thank you for your videos. You are a great teacher and explain things that are very technical in a manner that anyone can understand! keep up the good work!!!

@billdeeb4456 Жыл бұрын

Karl once again, I am blown away by the way you teach ,demonstrate and demystify things . TIG welding has always intimidated me just because of the foot feed, and how it runs. and you, sir have explained a way to remove that from the equation and get a beginner started . I also find it interesting that the basic principle is similar if not the same as Gas welding (where I started some 45 yrs plus ago) very old school and that was just how we did sheet metal patch panels back then . Of course some 35+ yrs ago I graduated to a mig welder . Now in my 60’s I would love to learn tig ! Interesting that after all these years we are never to old to learn and I will basically have to brush up on my gas welding skills ! Lol

@MakeItKustom Жыл бұрын

Glad this answered some questions for you!

@bladewes591 2 ай бұрын

One of the most explicit videos I've ever seen. My TIG welding experience actually got up there after watching this very helpful video, appreciate you bro 👍🏾👍🏾

@comingtofull-ageinchrist6736 Жыл бұрын

great tip on the shape of the weld indicating strength or weakness. I never really thought about a weld being concave not being as strong as it could be. I guess there is also the opposite side of that where it indicates the weld is too cold and not enough penetration! Thanks, Karl!

@MakeItKustom Жыл бұрын

Maybe something I should have covered is too cold. Thanks for the idea!!

@robertjones1709 Жыл бұрын

Thanks for the Tips on TIG, I've been using MIG for years, I may just break down and Snag me a TIG welder 👍

@kevinbishop5950 3 ай бұрын

Best beginner how-to TIG video I have ever seen. Very calmly explained. Thank you

@dennislange1757 Жыл бұрын

I learned a lot. Thanks for keeping it real and giving your buddy credit for his technical knowledge. You are genuine. Stay that way!

@lazyhoundracing9621 Жыл бұрын

Great video. I have been dipping in the center of the puddle and need a pile of tungsten because I dip a lot. Thank you for the tips and thank you for your time.

@MakeItKustom Жыл бұрын

You’re so welcome !

@saltyreesescup3104 Жыл бұрын

Thanks Man, I Just Purchased A 140 Combination Unit That Does Mig Tig And Stick. I Know Basically Nothing About Tig.

@jgraham8248 Жыл бұрын

Hobby mig welder here. I've been thinking about giving tig a shot. You present in a very understandable way that is not overwhelming yet informative enough to grasp the basics of what is actually going on. Very good video....thank you!!

@deankay4434 Жыл бұрын

I do not own a TIG, but owned a new MIG since 84. But I never owned a bicycle until a big used on showed up one day. This is more lesson on the TIG as I had to learn the bicycle by my self. This looks good, I just have to figure out how to get the money now. No money & time... or no time and enough time. I wish it would work out better for both. Thanks Karl.

@T3glider Жыл бұрын

If you saw my handwriting, you might not be telling me to hold it like a pencil!

@MidYearMitch Жыл бұрын

Haha same 🤣

@MakeItKustom Жыл бұрын

Hahaha 😝

@aaronsalvesen4553 Жыл бұрын

🤣🤣🤣

@Plan_VGaming Жыл бұрын

😂 same bro😅

@Not_Built-Right Жыл бұрын

Add another one to the tally, my dad says my handwriting is a new form sort of like the Egyptians he calls it Hydrogliphics 'cause it looks like it was written underwater thanks dad .

@jaymichael91 Жыл бұрын

Getting ready to construct my flat bed. This was a big help thanks.

@mtwTV70 Жыл бұрын

Very informative. I’m slowly trying to learn TIG on my own. Can’t wait for a video on lighter gauge. Later maybe one on lighter gauge to heavier gauge materials. All the info is greatly appreciated.

@chrisallen2005 Жыл бұрын

When I started I took a 30 hour class at my local tech college. It was 600 dollars and worth every penny. Did not have to worry about the cost of electricity, argon or any other consumables. Endless precut steel and aluminum blanks. Also no distractions. We were there to weld and weld. My skill level went through the roof over those thirty hours.

@DimitriBianco 5 ай бұрын

Thank you for this simple and clear video! I have a project car and have never welded. I just purchased a welder a week ago and will be starting to practice soon based off of this video.

@nickcautrell2514 Жыл бұрын

Big tip I learned regarding air flow in the shop. When it's really hot out in your non air conditioned shop a fan blowing on you to cool you off will obviously mess with your gas coverage. However, a large fan right next to you blowing away will still pull a lot of air past your legs and lower body but not affect what's on the table getting welded.

@owenjames5308 Жыл бұрын

I’m taking classes for my associates degree in welding right now, and I’m far ahead on my assignments. Having nothing to do, a senior student noticed & offered up some of his tungsten, a cup+torch, and some time in his booth every day for the rest of the quarter (Love this guy.) Today was a lot of trial and error, so I came to the tube searching for answers. I couldn’t have found a better video. I learned quite a lot and have lots to apply/try when I go in and get to it tommow! I apreciate your words of wisdom and sharing your experience, as well as how it Carries over to your technique. Cheers!

@fuaakay6651 2 ай бұрын

Karl you’re the MAN! Such a natural teacher. Man you really explained some of the most nuanced things in this vid. Such as amperage travel speed etc. Thanks bro

@rennch. Жыл бұрын

Well, this is definitely the best TIG training video I've found so far. Off to the garage now. Thanks man.

@terryrushing1255 Жыл бұрын

I've been been tigging for a couple years now. Good video for starters.

@MrHayabusa1299 Жыл бұрын

Very informative video. I bought a 200 amp TIG from Eastwood about ten years ago. I used it on some heavy gauge steel when I first got it. TIG welding is so much slower than MIG welding, at least for me. Now that I’m ten years older and might have more patients I want to dig it out and stack some dimes. Once I master steel I want to learn to weld aluminum.

@SchysCraftCo. Жыл бұрын

Very well explained and very helpful and useful information. Keep up the great craftsmanship and hard work my friend. Fab on. weld On. Keep Making. God bless.

@MoonBuiltGarage 7 ай бұрын

Great instructions! I finally picked up my first TIG machine and I am working on just the basics right now....taking it slow and not rushing into it

@StuartBertram110 Жыл бұрын

Hi Karl as always a great instructional, I love how you explain everything in a way that normal people can understand. Also if you don't mind a good friend of mine has a little side hassle "Tig Tickets", they are pre cut and cleaned coupons for practising Tig Welding. They are a great thing to have for people learning how to tig. I'm fine if your not cool with me giving my mate a shout out and you need to delete the comment. No hard feeling at all. Once again thanks so mich for all your content I always look forward to seeing what's coming up next. Thanks Stu

@MakeItKustom Жыл бұрын

That’s a great idea! TIG TICKETS 🎟️ for practice. I like it. Anything related to anyone furthering their skills is welcome 🙏 always

@StuartBertram110 Жыл бұрын

Thats great thanks very much

@indigojewsnap7307 Жыл бұрын

For four months I took TIG lessons. If only my tutor was like you. Probably learnt more in the last half hour than in the four months put together. - Thank you.

@MakeItKustom Жыл бұрын

Amazing man I’m stoked this was relatable to you

@fadmdcmncorymiricylbabyhof5235 Жыл бұрын

These tips are VERY helpful. This is what I need to go back into the shop for work. I'm a bit rusty.

@orangeorchid9067 11 ай бұрын

I'm currently taking a 6 week continuing education class at a local JC on welding and I've learned waaaayyy more from you about technique and process than from my class instructor! Thank you for taking time to share your valuable knowledge and experience with us.

@rickcrow3149 4 ай бұрын

This is the best TIG welding video I have ever watched.

@andrestockbridge3000 Жыл бұрын

I’ve been wanting to try TIG for a while now and recently invested in a new 4 in 1 welder to replace my ageing MIG. Tutorial is excellent for getting going and learning important tips early. Many thanks!

@michaelguinn5736 Жыл бұрын

Morning Kurtis!! I've been fabricating for 40+ years, started out stick welding on a old Lincoln welder that was sold by K-Mart if I remember correctly... started Tig welding probably 20 years ago...I found out if you're not feeling well or having a bad day, don't Tig weld!!

@MakeItKustom Жыл бұрын

Yea that’s the truth isn’t it lol no stumbling into work and having nice welds

@sarahbahr1273 10 ай бұрын

Thank you SO MUCH!! 🥳 You're videos have been so informative to watch! 2weeks old welder here. No education.. this HELPS!😊

@alandouthwaite6980 8 ай бұрын

At 86 I am going to buy a low cost tig welder and have a go. I have in the past done gas welding, stick welding and mig welding but only as an amateur. I gat rid of them long ago, which was a mistake, my mig welder was a big pro job but I virtually gave it away, however About a year ago I bought a cheap gasless mig welder and nearly burnt the workshop down !!!...Now all those years ago, a tig welder cost an arm and a leg so I had not even thought about tig but now it looks like this video is going to cost me some money (but not a lot). Your instruction is brilliant and so easy to follow that I am looking forward to learning how to do it and hopefully be able to do a decent job without those damned gasless sparks burning me and the workshop down. Thank you so much, now back to the video !!!

@jdwisdom9433 Жыл бұрын

This is about the simplest explanation of how to do it without all the extras that confuse and distract. Thanks Bro! JD

@paulvanhouts3365 Жыл бұрын

Hi Karl, I am ready to learn to weld Aluminium. I recently bought a 200 watt tig, a cheap import because I am retired. I like mig welding, self taught, as I was for arc welding. My mig can be set for Aluminium too but watching the you tubes on Aluminium welding it seems tig , while slower, gives the best results. I enjoy these info videos. I haven’t tried tig for steel but after this vid I can see that it provides a good grounding on techniques that apply to both. Keep up these great vids. Also looking forward to more on the zephyr, the truck and mini Buick.

@wojo1034 Жыл бұрын

I just started welding and have not even opened the Tig gun on my Vevor 270. I still have to get another gas bottle for 100 %ag. Thank you for your videos you are a great teacher.

@rodwatson8732 Жыл бұрын

Best intro video on TIG I've seen. I always like how relatable you are in your videos. I don't even work on cars any more, but I never .is your videos. They help make the Alaskan winter go by quicker. 😆 Thanks much.

@mopar4656 Жыл бұрын

Totally comprehensive explanation. Thanks Karl.

@davidson2004fatboy Жыл бұрын

AMAZING TEACHER, U BLESSED Bro.👍 WORK HARD, STAY HUMBLE 🙏

@deltabloo 11 ай бұрын

Excellent. I just bought a new tig welder… it’s not even out the box yet…I’ll be rewatching this video again I’m sure!

@gregoryl.4872 4 ай бұрын

Thanks so much for the detailed training session. I've been struggling. Your video just may be a game changer.

@lawncuttingplusdelta Жыл бұрын

This is a great lesson !! … I feel like I’m there and it’s practical and to the point ! …. Great camera work , to see the weld in real time ,like I’m wearing the mask !!!

@dirtyford633 Жыл бұрын

I always use the stubby caps on mine, and cut my tungsten into thirds. Sharpening both ends, and I get twelve tips out of two tungstens and they're good to go. I know I'm dipping, but with that many ready to go, no issues. Side note, picked up Ray's Shrinking Disc, funny thing he's only 2hrs from my home, and watched your video again a few a times. I was fixing old repairs on my rear quarters, done by god knows who. 3/8" thick filler and waves just as deep. That disc made my life SOOOOO much better. I had hammered and heat shrunk to what I thought was good enough, +/- 1/16", but now, it's all down to barely seeing any daylight under a straight edge, and no oil canning, which I was fighting like crazy. THANK YOU FOR EVERYTHING YOU DO! I can't emphasize enough how great your channel is. I was smiling ear to ear after using your tips and getting to a point I never thought I'd be capable of.

@MakeItKustom Жыл бұрын

That’s so great to hear man there’s no better comment to read than ones like this! So glad that you are having success with it!!!

@comingtofull-ageinchrist6736 Жыл бұрын

thanks again, Karl! I've learned a lot from watching your channel. I respect the fact that you shared the process, even the parts where you had to correct yourself. I think more is learned from that than is realized.

@ericboothe8236 Жыл бұрын

This is what I’ve been waiting for. Someone that could explain it in the simplest of ways. Thank you Karl

@Kawasaki_King 9 ай бұрын

Thanks dude, yesterday i was trying to feed the rod as if it was coming out of a mig, or an arc welder - today it's all beginning to make sense this black magic voodoo tig stuff! Great starter lesson! 🤘

@ratt727 Жыл бұрын

Great tech session, have my miller mig, but tig is something I would like to learn soon

@johnmcdonnell6109 Жыл бұрын

Karl, Great video! I bought a TIG welder about 5 years ago and haven't powered it up except for unboxing to ensure it would turn on because I didn't know where to start. You have given me a place to start! I hope that you continue this with a series that then gets into the intermediate TIG and then advanced with maybe showing some of the technology upgrades like the pulse and the more into pre and post flow and why you would turn them up or down based on material types and thicknesses. Also looking forward to seeing more on the COE project and the Zephyr! Keep up the great content!

@AotL0000 10 ай бұрын

Tried Tig welding today for the very first time and made some good progress imo without any tips etc gonna try again tomorrow after this vid

@sengalsolutions7386 Жыл бұрын

After struggling as a beginner - this nailed it for me. Thankyou.

@davidabernathy1615 4 ай бұрын

Very Helpful!! I've always looked at TIG welding as the difficult welding, so I stuck to stick and MIG welding. You have motivated me to start working on my TIG welding. Thank you!

@stanleymichael4849 9 ай бұрын

Hi,am a welding instructor, after watching the vidio ,I appricieat the way you damontrate.great.

@Qspecialman 7 ай бұрын

A really interesting video Karl. The great thing about KZfaq is you can always learn something, your videos are particularly helpful and informative. Thank you for taking so much trouble.

@tonytribisonna9886 Жыл бұрын

This video was very helpful very good point you made about being comfortable holding torch and cable around your arm and shoulders instead drag on the ground same as a spray painter when painting a car doesn’t have the air hose dragging on the ground supporting the air hose on shoulder and arm so has better control of spray gun good video I enjoyed it.

@jamesdover7110 10 ай бұрын

Really helpful I've never tig welded but I'm about to learn and these are very helpful tips especially the foot petal thanks

@trottermalone379 Жыл бұрын

Great communication on a complicated topic. Your grasp of the video medium is about the best I have seen!

@bigrednick100 Жыл бұрын

Thank you for the video. I bought a tig welder about two years ago. Ran like three beads. Then it kind of fell to the way side. Update to now, I run a small plasma cutting business as my side hustle and I’m getting more and more in to fabrication. After watching this tig doesn’t seem to intimidating. Thank you for breaking it down. I don’t mind mig, but for what I’m starting to make I’d like to have smaller beads. I think this will help a lot.

@stevpush Жыл бұрын

just started watching your channel i watched your mig tutorial video and now this one just intrested in how all this works this was an excellent video thank you

@penguinbrand Жыл бұрын

I really appreciate the explanation of the use of the pedal. I have not seen that addressed on KZfaq before. Thanks for sharing all of your knowledge. You have skills Sir!

@comingtofull-ageinchrist6736 Жыл бұрын

This was super informative, Karl! Thanks, brother!

@danmurphy5660 Жыл бұрын

Been waiting years for this video mate. Well done lads.

@ricksennema9228 7 ай бұрын

Thanks Karl , about to start some TIG welding so overdosing on KZfaq how to videos … gotta say that your video was one of the easiest and make sense videos out there ! Thanks

@OtisMamed Жыл бұрын

I’m just about ready to start TIG welding. This is great stuff! I now have some homework once the regulator and tank are here. Thanks !

@SuperGemma2010 8 ай бұрын

what a fantastic quick guide to tig welding, you are a fantastic teacher, concise and easily understandable, you have mastered the method of demonstration over explanation, the best teaching method of all time, thanks mate, your a legend, love your work

@MakeItKustom 8 ай бұрын

Glad it was helpful!

@borisklimov1030 5 ай бұрын

Hi! I'm a low poly model designer. I used to work with cardboard, and recently I purchased a TIG device for learning how to work with metal. My goal is to improve my patterns for welders, basing on my practice, not only the theories. And your video is a good start point for me. Thank you! Do you have by any chance a video about safety and such things like plus and minus plugs, the difference, how to use connector with clipper?

@listprop 5 ай бұрын

Much appreciated vid. I am just starting TIG for hobby purposes and this is just what I was looking for. Thank you!

@paulhedman7387 Жыл бұрын

Thanks Karl, I haven't done any tig welding in over 20 years and may get one of the cheap welders just to see if I can still do it. My eyesight isn't what it use to be but they do make some strong readers. Elio (sp) is doing a great job with the filming. I am always looking forward to your next video. Because of you I've also gotten hooked on Brent at Halfass Kustoms. Completely different approaches to the subject but both successful in your own way. This is the great thing about art, I'm involved in wood turned art and have gotten to know many other turners around the world. We all do different things in different styles but it's still pretty much the same.

@squarefour1 6 ай бұрын

Great tutorial. You speak well. Video is great. Technique is perfect. Thanks for the help. I like the step by step

@martinmessersmith2900 10 ай бұрын

Your instruction, as always, is amazing! I've tried TIG welding unsuccessfully, now hoping with your shared wisdom and some training exercises I'll be able to get it down.

@josephus333333 4 ай бұрын

Thank you for the clear and comprehensive instruction. A cut above others.

@waynespiteri122 Жыл бұрын

Thanks Karl, your video was very helpful. Just picked up a new Everlast 185 in order to carry on my panel work on my 34 Chev. Haven’t picked up tig torch in 30 years , hopefully your tips sink in , thanks and keep on what you are doing.

@robertstacy6374 9 ай бұрын

Thank you again for a to the point video that is easy for me to understand. One more way for me to add something to my skill set.

@hughtube1 Жыл бұрын

Another great video. I have been on a TIG course recently and I have learnt more form your video than from the course. Thank you for a great explaination. Hugh

@kirkoglesby6175 Жыл бұрын

Thanks again for the information, Karl!

@joycefields7389 11 ай бұрын

This video is so helpful. I’m trying to go into aerospace welding job. I learned more from you then at a welding school.

@ericc.363 8 ай бұрын

I have to agree you have a talent for teaching, I know plenty who have skills but not everyone is able to teach a skill.

@ve9mj 8 ай бұрын

My tig arrived today!!!...great video!!!...Looking foward to practicing those techniques...

@RobertBeck-pp2ru Жыл бұрын

Thanks for this vid. You touched on many of the problems I have experienced as a beginner in tig welding. Mig has been my go-to method for most of the automotive welding I do. It seems much more forgiving and faster, but if done right, tig is much more precise.

@b_for_brett Жыл бұрын

Super useful video Karl, thanks 👍

@andreimiklin 10 ай бұрын

Probably the best tutorial Ive seen on TIG basics! Thanks!

@philsson4935 9 ай бұрын

Thank You for the video! I'm trying to learn as I go, but you have explained a lot........ I pause, go try, and come back to watch again. Like you say, =Practice! Once again, Thanks! When I thought /didn't, you made things clearer. It was me, and my technique.....Still going to keep at it, as a beginner, but with your help, it make's it much easier!!!!!!!!👈👍

@andremontjoy6922 11 ай бұрын

I found it very helpful. I tried my hand at Tig welding and couldn’t get comfortable enough to use on rebuilding the front end of my tacoma . And had to Mig weld it. So now I can try again