Making a 2400 meters LONG RANGE 8-Channel & Digital Trim Radio Control For RC Models. PART-2

Рет қаралды 707,302

Жыл бұрын

How to make long range remote control with 100mW NRF24L01 PA LN (E01-ML01DP5) 2.4Ghz module and Arduino.
If you like my projects and want to support me to make them sustainable...
Patreon: patreon.com/KNDYP
KZfaq JOIN: / @kendin-yap
Necessary materials:
2 x PS4 Analogue Joystick (10K) : s.click.aliexpress.com/e/_DBS...
2 x Toggle switch: s.click.aliexpress.com/e/_DCd...
2 x 100mW NRF24L01 PA LN (E01-ML01DP5): s.click.aliexpress.com/e/_DmE...
2 x Arduino Nano: s.click.aliexpress.com/e/_Dlh...
2 x NRF24 wireless 3.3v adaptor: s.click.aliexpress.com/e/_Dlm...
2 x 100uF (16V or above) electrolytic capacitors : s.click.aliexpress.com/e/_DBJ...
4 x Female Header Pin (15 pins): s.click.aliexpress.com/e/_DDq...
2 x 10K potantiometer: s.click.aliexpress.com/e/_DCV...
Universal PCB board: s.click.aliexpress.com/e/_DF8...
AA Pil Kutusu (6xAA Cells) : s.click.aliexpress.com/e/_DFM...
veya 18650 pil kutusu : s.click.aliexpress.com/e/_DER...
5mm LED: s.click.aliexpress.com/e/_DB6...
330R Direnç: s.click.aliexpress.com/e/_DFk...
Rocker buton (10x15mm): s.click.aliexpress.com/e/_DDv...
Tact buton (6x6x7): s.click.aliexpress.com/e/_Dm2...
Screws: s.click.aliexpress.com/e/_DEv...
Heat-Shrink: s.click.aliexpress.com/e/_DnM...
26AWG cable: s.click.aliexpress.com/e/_DCR...
Soldering tool for Connectors: s.click.aliexpress.com/e/_DkM...
Thanks for watching. If you want to support, join this channel.
/ @kendin-yap
DIAGRAMS & CODES: www.rcpano.net/2022/10/30/mak...
OR tinyurl.com/49treus3
PART-1 Video: • Making a Long Range Re...
Radio Box 3D STL Files: drive.google.com/file/d/1DkdL...
My Website (KendinYap): www.rcpano.net
Required materials for regulators:
1uF electrolytic capacitors : s.click.aliexpress.com/e/_DDV...
10uF electrolytic capacitors: s.click.aliexpress.com/e/_Ddf...
100nF ceramic capacitor: s.click.aliexpress.com/e/_DmU...
7805 5V Regulator IC: s.click.aliexpress.com/e/_DDv...
7809 9V Regulator IC: s.click.aliexpress.com/e/_DlX...
80W soldering iron: s.click.aliexpress.com/e/_DD7...
Digital Multimetre AC DC A830L : s.click.aliexpress.com/e/_Dmj...
Digital Multimetre AC DC ANENG XL830L : s.click.aliexpress.com/e/_DEJ...
UT61 Profesyonel Digital Multimetre Tester: s.click.aliexpress.com/e/_Dmt...
My website: www.rcpano.net
#DiyRC #DiyArduinoRC
Thank you for watching. Please Share, Like and Subscribe for More Amazing Videos.
All of my videos: / kendinyap-video

Пікірлер: 866

@JannieH Жыл бұрын

Simply incredible how far electronics have advanced in the last 40 yrs. Back in the 80's I built a six channel on the old 27Mhz band. The receiver was most daunting. True AM super heterodyne technology, hand turned pick-up coils with 455Khz IF coils. Miracle to have got it working at all. Well done on this very well presented project...Brilliant.

@orange_tweleve Жыл бұрын

Hand tuned couls , rhat truly something tbh

@yaminsiddiqui4690 Жыл бұрын

legend

@paradiselost9946 Жыл бұрын

im fiddlinga round with a project retro build... 50s style. a motor driven PWM? the tX is the easy bit actually... just CW.

@dubab.249 6 ай бұрын

I remember those times, it was enthusiasm and not this today, you type in your laptop and you're done.

@ashwinrawat9622 2 ай бұрын

Hi, where can I find design for such a thing? I would love to build something like that.

@brianparisien9262 Жыл бұрын

Fantastic! I've been looking for something like this for a long time! Many thanks for your generosity and sharing.

@marcofe82 Жыл бұрын

Hi, it's absolute impressive what you've done! I can't imagine how much effort you spent in this!Stunning!Lastly, Thank you so much to have shared this project!

@trentsuveges7622 Жыл бұрын

Dang that's gotta be the coolest thing I've seen ever!

@antonisvianos8017 Жыл бұрын

Till now have made 6ch control, drone, retracts, rc airplane all work perfect. With few words Kendin is MASTER!!!!!!!!!

@maraqltv7748 Жыл бұрын

mini bayraktar lan adam. hela olsun abi !

@knightflyer909 Жыл бұрын

Excellent range test! The best I have seen yet. Thank you.

@rctruckjp Жыл бұрын

Me encanta sus proyectos. Quisiera aprender más de usted. Me toca meter el esfuerzo para lograrlo pero con sus videos tengo guía para lograrlo. Saludos desde Colombia. Sigue así mi hermano.

@333donutboy Жыл бұрын

This is going on my "project list". I subbed because I'm looking forward to more content. Thanks!

@senoltetik6709 Жыл бұрын

bende devamını bekliyordum bu işe gönülvermeye hazır ama maddi yetersizlikleri dolayısı ile başlamayan yeni nesil için çare olmuşsunuz .teşekkürler.

@benjaminjohnson6476 Жыл бұрын

Very nice. Seems like a cool project to do. Love you're content type. Keep it up!

@jonoyb4721 Жыл бұрын

Purely awesome! Amazing skills! Congratulations!

@mmtechchannel8002 Жыл бұрын

It's really amazing. It has a really long range. This distance is enough for me

@dudkipl2802 Жыл бұрын

amazing. perfect for anyone who has time and doesnt want to waste money on an expensive RX and TX

@Jabanoflier Жыл бұрын

Awsome build. Great flight too.

@juliocesarvelandia3386 Жыл бұрын

Muy elaborado, de principio a fin. Total: Una obra de arte. Y para hacerlo, hay que saber si o SI.

@MehmetSutas Жыл бұрын

Mükemmel bir proje olmuş. Elinize sağlık.

@surveyengineer2372 Жыл бұрын

Hocam helal olsun. Diyecek söz bulamıyorum artık.

@haydensuperville1967 Ай бұрын

Brilliant and Extrodinary Work......Masterful Indeed!!

Жыл бұрын

Harika bir maker örneği olmuş hocam, ellerine sağlık

@ismailmercan5393 Жыл бұрын

Mükemmel ötesi bir çalışma emeğinize sağlık 👏👏👏

@StyleTechnique Жыл бұрын

Allah razı olsun, bu projelerinizi bizimle paylaştığınız! Çok sağolun!

@mehmetalikocaslan5152 Жыл бұрын

Elinize emeğinize sağlık. Çok güzel bir proje olmuş. çalışmalarınızda kolaylıklar dilerim.

@stargazer279 Жыл бұрын

im glad i found your channel, i will be able to build some projects with your videos as reference

@hadibiseyleryapalm2870 Жыл бұрын

Mükemmel olmuş. Kaliteli içerikler için teşekkür ederim.

@weareelectricgi Жыл бұрын

very cool and very clean build. awesome 👍

@pcantele Жыл бұрын

Wonderful job!👍

@berkaykara1255 Жыл бұрын

Hocam çok güzel çalışmışsın tebrik ediyorum 🥹👏👏

@allengentz7572 Жыл бұрын

Thank you for sharing this project well explained and would be an excellent challenge for me.

Жыл бұрын

2. videoda geldi. Gerçekten güzel çalışma olmuş. Emeğinize sağlık.

@kuro1803 8 ай бұрын

coolest thing i eve seen today

@beytullahaztekinn Жыл бұрын

This project is wonderful.

@mckone9 Жыл бұрын

Eline sağlık hocam. Good job

@slowpasha Жыл бұрын

Abi sen napıyon ya, işi baya ileriye almışın reis 😂👍

@josefix1987 Жыл бұрын

Thank you so much for this educational video, I learned so much.

@fluffyflunk Жыл бұрын

Nicely done. Simply beautiful. I'm very tempted building one for myself even though I don't need it since I'm blessed with the TX16S.

@skatehero7703 Жыл бұрын

Harika olmuş. Emeğinize sağlık.

@umitbaba5690 Жыл бұрын

Really amazing buddy, I don't know what to say, amazing! I will make too

@deneyselhobi9333 Жыл бұрын

Hocam ellerinize sağlık Çok güzel bir çalışma olmuş tebrikler

@khaleedan 5 ай бұрын

Well done mam really unbelievable ❤❤❤❤

@zahidhamood6079 Жыл бұрын

Outstanding sir... One the best video... Appreciated 👉💯💯❤️

@user-ld2mv2hr6r Жыл бұрын

Thank you. I'm jealous of your skills

@frankdearr2772 4 ай бұрын

great topic, thanks 👍

@aliseref9767 Жыл бұрын

Çok güzel bir çalışma olmuş, ellerinize sağlık.

@IzergilBaba Жыл бұрын

It would be interesting to try the same project, but with the ESP32 with external antennas connected through the ESP-Now protocol in Long-Range mode. The price range will be the same, and ESP32 can be programmed in Arduino IDE. Also, the weight of the receiver can be reduced using some tiny ESP32-C3 modules, such as Seeeduino.

@drumbum7999 Жыл бұрын

no.

@downey2294 Жыл бұрын

how would that work?

@g.p.7880 Жыл бұрын

Nice 3d model 👌👌👌

@EdgarMorales-vw2wr Жыл бұрын

Good JOB CONGRATS!!!

@mrwaqas6208 9 ай бұрын

Thank you so much to have shared this project🥰🥰

@varunkulkarni3240 Жыл бұрын

very nice projects, watched all videos, nice keep it up 👍

@tekosis1 Жыл бұрын

Elinize sağlık çok güzel çalışma.

@Krash_fpv Жыл бұрын

Very nice build quality....I really want to learn Arduino....time to start studying

@c.n.palanivelrajan6080 Жыл бұрын

Thank you for awesome and incredible idea

@Lukenukkem Жыл бұрын

Nice work. I may have taken the time to etch out my own circuit board.

@kemalylmam8684 Жыл бұрын

On numara beş yıldız...

@nickoyumicko7954 Жыл бұрын

Thnaks for your sharing , good job 👍

@isayildiz6478 Жыл бұрын

Çok güzel bir çalışma olmuş tebrikler

@arunsasidharan2577 Жыл бұрын

Simply awesome. Can you make a auto pilot too?? That would be great 👍

@adalante35 Жыл бұрын

çok güzel bir çalışma olmuş elinize sağlık

@qqpp6017 Жыл бұрын

Thank you for the good video. ^^

@conorstewart2214 Жыл бұрын

For the Transmitter you don’t need to connect power and ground to the switches, you can just use the internal pull-up or pulldown internal resistors.

@onebreh Жыл бұрын

it changes the behaviour of the pot. For linear input you need to connect power and grund too.

@conorstewart2214 Жыл бұрын

@@onebreh I know how a pot works, I am on about the toggle switches which they connected to both power and ground, they are connected directly to a digital pin, they have nothing to do with the pots and for switches you only need to connect it to either power or ground, not both, and use either pull up or pull down resistors which are present in the arduinos digital pins. Also pots don’t need to be linear, you get logarithmic pots too. Edit: see how they did the buttons, they can do the switches like that too with only 2 wires.

@isaacluz7398 Ай бұрын

Professor muito bom. Já sou seu fã. Obrigado por compartilhar seu conhecimento. Saúde, obrigado.

@motivational67624 4 ай бұрын

very good 🎉🎉🎉

@JaydenLawson Жыл бұрын

Was hoping that you would build the vTX system too! That's what I'm most interested in

@conorstewart2214 Жыл бұрын

VTXs are very complex devices, they are far beyond what a hobbyist can do, just like most kinds of radio control, including the modules used in this video, they just use off the shelf radio modules they didn’t design them themselves. Video in general is a lot more difficult to work with and in drones or robotics they usually just take the camera and connect it to a VTX sometimes through an OSD chip.

@SrunEmpire Жыл бұрын

Nice and love your content

@paimo27 Жыл бұрын

This is very awesome project

@EDITZKING2012 Жыл бұрын

Yes

@anthony3D Жыл бұрын

Bon travail 😎👍

@hassenfit2589 Жыл бұрын

You are genius Bro

@wallaguest1 Жыл бұрын

looking great

@dz-abouttechnique1849 Жыл бұрын

Nice video!

@dobo1980 10 ай бұрын

When changing the channel inversion to control the servo, I noticed that there was an error in the assignment of channels to pins. Namely, the A3 NANO CH4 pin of the transmitter controls the D0 (RX) pin of the ATmega328P-PU_DIP CH1 of the receiver. It is similar with A1 - CH2 of the transmitter, and on the receiver it is CH3 - D3. TRIM in the transmitter works well for me. I haven't changed anything in the code, the pins are assigned as in the shared code. How and where can this be fixed?

@muhammetusta4198 Жыл бұрын

bu kumandayı yapmak istiyordum kumandalar pahalı geliyordu ama sonunda hayalime kavuştum ve kumanda sipariş verebildim kendin yap videolarını çok seviyorum yaptığın maket uçakları çok özenerek yapıyorsunuz inşAllah kumanda geldiği zmn bende sizin gibi bir tane maket uçak yapabilirm iyi günler

@agahgokdag1845 2 ай бұрын

Yaptın mı?

@muhammetusta4198 2 ай бұрын

@@agahgokdag1845 kumandayı aldım uçağıda yaptım pervanesi kırıldı sipariş verdim geri pervaneyi takıcağım ve uçurmaya devam edebileceğim

@jefersonmedeiros7677 Жыл бұрын

Very nice !

@bulenboncuk426 Жыл бұрын

vidio kaçırmışım bügüm karşıma çıktı son derece ınanılmaz güzel 👍👍

@gauravkhanekar3924 Жыл бұрын

Really Awesome man...😍🌹👌🏻 Can you make this Tx with some more extra Channels and Colour touch display like professional Tx16s. With different kind of RC model selections, and custom starup Logo and custom startup audio and other audio for mode selection. Thank you...😃🌹

@rckhmer6780 Жыл бұрын

ល្អណាស់😊😊❤❤

@alexanderrodriguez9434 Жыл бұрын

Hola amigo excelente proyecto

@karangupta4978 Жыл бұрын

I'm gonna attempt this built this summer... wish me luck guys.

@KHALED-sk5cu Жыл бұрын

Amazing bro.. 👌

@mohammadnazmi6146 Жыл бұрын

خیلی خلی عالی بود

@AlioshNeira Жыл бұрын

awesome!!!

@SchwanaCARDHUT Жыл бұрын

MERCI ET BRAVO 👏 👏 ...............

@user-su4ln3nq7q 9 ай бұрын

이건 뭐 봐도 못만들겠다...진짜 대단하네 ㅎㅎ 수신기 만드는 방법도 있나요?

@jozefnovak7750 Жыл бұрын

Super!

@eon147 8 ай бұрын

eline sağık abiiiii

@ioannisbatas1614 5 ай бұрын

Superb !!!

@bdrkrg5460 Жыл бұрын

Hocam çalışmalarınız çok güzel sizden 3d programlara dair bir videoda bekleriz

@davidepiccini9254 Жыл бұрын

Wow comgratulation

@user-gf7qo7lm9y Жыл бұрын

Hi @KendinYap, I have a question. I already made the transmitter and the receiver you showed in the video, but there is a problem. The transmitter sends signals(printing values in serial monitor), but the receiver does not receive them. The receiver POW and RX LEDs are on, but the transmitter LEDs - L and TX are shining very weakly. What can I do to fix this problem? Thanks a lot! :D

@amir.mahfoozi Жыл бұрын

This is a rival to the Bayraktar TB2 😁

@oxi4825 Жыл бұрын

Wow 👍

@doverivermedia3937 Жыл бұрын

You sir, are a GENIUS ! I've still got my old, non working vintage 'fleet' UK brand Tx from when I was 12 (i'm now 58).I'm also studying arduino and coding and now have a 3d printer, so this will be a fabulous project but using the old Tx & joysticks as the housing.It will be a real nostalgia trip. Question: Is there any difference in latency with the DIY system compared to shop bought systems ? And are there any interference issues ? or any other disadvantages with the DIY system i should know about ? Thank you for your excellent content. Amazing resource !! uk.

@Kendin-Yap Жыл бұрын

Thanks. Latency is higher than commercially produced RCs. Especially at long ranges. But a typical model airplane is flown within a radius of 150-250 meters. Therefore, the delay remains within reasonable limits. Signal link stability is also not as good as commercial production RCs. This type of Diy remote control systems is sufficient for models with small electric motors. But I don't recommend it for big and fuel engine models. But I should also point out that; I do not recommend very cheap (under 40-45 usd) commercial production RC systems for fuel models. Because they also have signal stability problems.

@doverivermedia3937 Жыл бұрын

@@Kendin-Yap Thank you for the excellent response/advice. I will definitely bear all that in mind when choosing my application carefully.