It's a shame the brown shirts at Airgun Nation forums no longer allow this type of content. Thank you for sharing your beautiful work.

Every time I see your lathe work makes me wished I paid attention at school metalwork classes....outstanding. You could hear the difference in the shroud, as you say though, not a great deal. The felt certainly makes it a thud and deadens it a bit. great work.

A beautifully made moderator core for the V3. With the silencer attached the V3 is all but silent! Thanks for sharing the video 👍

Thanks again for the fantastic depth and range of advice given here, both in terms of air gunning and engineering.

the best art in airguns, please don't forget what you promised, pressure gauge for the regulator. Greetings

As you say, it's always difficult to record the difference in sound but I would say that (same as with all my same efforts like this) it usually just highlights the hammer/valve noise, making that the loudest noise after. I have often wondered if anyone has made some form of sound absorbing cover for around the hammer/valve area of a air rifle. I know it always sounds louder when out and in use because, especially on a bullpup, it's right next to your ear. Something for you to work on. As usual, another excellent video. 👏 👍

Stunning job as we see you perform on every video, just a shame you don't do custom work for customers. I suspect you would do a much better job than some of the so called tuning come customising experts out there.

Amazing piece of work

you're a pcp engineer it's sure to every one I'm still shocked bravo bravo bravo

As always very interesting, really enjoyed it

The best airgun knowhow channel. TX. Great job as always.

Perfection just comes natural to you jake and its visiblein each and everyone of you're videos. absolutely spot on .

Moderator looks great, very well machined as always. Will be interesting to see what it looks like when the muzzle brake is completed. 👍👍

My favorite airgun channel! Thank you for your content.

Awesome machining as always. It definitely sounded different IMO, new core without the felt sounded best imo.

Fascinating process and excellent work as always!

Another excellent video 👍🏻👍🏻👌🏻 Can’t wait for the alpha wolf videos😎

Ah lads this quality of work is fantastic. Love the videos. Great to see the effort and passion in your work. I’ll catch up with at the northern shooting show again. The gun is extremely quiet all you can hear is the action imho.

Great work as always Jeff, very informative and help full, great watch Cheers 👌👌👌👌👍👍👍👍👍👍👍👍👍

I just think it's wonderful how you do that with the explanation just supper

Lovely job Jake

Amazing work as always sir!

Really enjoy your machining vids. Brilliant engineering skills. 😊😊😊

Excellent work guys. I made a similar device for my latest build but for inside the mod. It's very quiet.

Machining masterclass.

Sweet job ,hopefully you can do something similar to the Vixen. I need to blow the dust off my lathe lol

Way good n nice work!👍🏻👍🏻

Great watch and as ever watched every second 👍 I really enjoyed this one and I think the results sum it up nicely and literally speak for themselves 💪 Well done 👏 another improvement to a cracking rifle 🤌 just goes to show perfection can be perfected 😊 Nice one jeff/jake 🙌 can't wait for the next one 👌 atb

Vi seguo da un po', perché anche io sono possessore di un AGT Vulcan 3, complimenti 👏🔝 per tutti i lavori e miglioramenti che effettuate sul fucile, purtroppo nn tutti sono in grado di lavorare al tornio come fate voi, sarebbe bello se anche noi potessimo acquistare i pezzi creati da voi. Saluti dall'Italia

Been waiting to watch this excellent as always extremely informative and great content my dad had his moderators made by hand for his powder burners at least six different calibers some very hot some not in fps i only shoot sub 12 so to seebthis level of lets face it artistry just wish i had the tooling proper lathe work that is grand to see cheers for the video it was a agood watch 👍👍😂

Hi Master Chief of airgunology. Good work keep it up more. Regard

I'm not amused by how well you manage them, that you don't test them with some sound meter and also with pellets, greetings and have a good day. It's just that I'm embarrassed to mess with them

I was thinking when i get my Vixen short ,i was going to line the inside of the sroud to see if it takes out the bark ,do you think this will work or what would ypu do ?

Hi, good video mate. I know its difficult but the noise level didn`t seem much difference. Have you ang drawings available for making a moderator.?

What Scope are you using there Jeff?

Hi, my friend, I have a good job, I would like to know if there is a way to improve the functioning of the side lever, why is it so heavy to assemble? very brave

wow well good

What's UNF stand for and what's the point of a shroud?

Your good dam you 😊

Always enjoy the metal work. awesome work as usual..

Just converted my HW100 to buddy bottle and form stock but the supplied shroud is not the best, movement after a few shots its held in place with a grub screw, poor really. Do you know of anyone that could design a better shroud that will enable me to fit a moderator on the end as well. I have taken the shroud off now and I am using just a Wierhauch moderator, but the gap between barrel and bottle spoils it a bit.

Lots of work but it's worth it. 🙂

Xin lỗi bạn có thể cho tôi hỏi đường kính bên trong của lỗ giảm thanh cho cỡ đạn 5.5mm hoặc 4.5mm là bao nhiêu để đảm bảo triệt âm tốt nhất được không ạ

Amazing gun

Sản phẩm tốt đã có mặt trên thị trường amazon chưa ạ

they make lathes with coolant pumps now,😂

Many of us Airgunners would be royaly screwed with your video output.

I like air rifles. and I am very happy with your video, but unfortunately there is no Indonesian language, so I just enjoy the video without understanding your regrets. Please activate Indonesian so I can understand the details of your explanation. Sorry, I made this with the help of Google Translate.

Amazing engineers