A documentation about the creation of my first concertina, a 25b Anglo, from household supplies and old accordion reeds. Go to this page for more information: www.concertina...
Пікірлер: 39
@SqueezeboxOfDelights4 жыл бұрын
Makes me want to build a concertina...
@theaccordiondude64164 жыл бұрын
I tell you that is absolutely incredible
@bveracka7 ай бұрын
It really is. He did an amazing job with it and aside from using better "spring steel" wire to make the springs, everything is really tip-top on this project. I'm truly amazed.
@paulabuls58025 ай бұрын
I love your shop built tools (like the skiver). Inspirational. We’ll done Sir!
@dsch63674 жыл бұрын
Great use of material that you have. The best designs always reuse material on-hand to come up with an item that performs as needed. Attention to detail in the process is the attribute that makes the craftsman.
@bveracka7 ай бұрын
This truly is a huge accomplishment. I tried making one myself some years back, but I put the project on the back burner for several reasons - primarily to learn to make or buy some better reeds, and because I play accordion I've considered making a one-row cajun accordion instead. Anyways… The _ONLY_ thing I'd do differently (and what I did myself) is to buy some good steel wire like "spring steel" or strong steel wire - not heavier gauge, just stronger stuff - to make the springs. This will ensure the springs last for a long time, and rebound with the best action possible. Softer steel in paper clips will likely wear out over time, but I guess you'll find out. Other than that very small quibble, this is an _amazing_ build, and you did a really great job with this. It's easily one of the most impressive KZfaq project videos I've seen in _years_ - and that's really saying something coming from a guy who watches so many. Give yourself a pat on the back!
@cas_creations7 ай бұрын
Thanks for your kind words and I'm glad you got a lot from the video; it's a big reason I make these. This first concertina was built fairly roughly and I've learned a lot since then. My more recent concertina I built reflects this and I improved many things such as using phosphor-bronze wire for the springs. Surprisingly, the paper clip springs have held up relatively well even after all this time though. I may make an improved 30 button anglo build video in the future.
@bigbraincontent3 жыл бұрын
Great build!
@user-om8mz3ey6k2 ай бұрын
I remember back in the 60s taking my mother's mouth organ apart. The reeds were all individual like mini concertina or accordion reeds. Now they seem to be just on a plate. I wonder why they changed.
@tomsch58014 жыл бұрын
Awesome work.
@fakiirification3 жыл бұрын
the only way this could be any more impressive is if you had made the reeds yourself as well! LOL. great work!
@elizabethschartman89584 жыл бұрын
Very impressive!
@torstenf8613 Жыл бұрын
Would it be possible to get/buy/see your blueprints? For the instrument, and the tools?
@cas_creations Жыл бұрын
Thanks for your interest, but unfortunately I don't have much in the way of documentation for this particular instrument. There is a lot of information about concertinas here, though: www.concertina.net/forums/index.php?/forum/7-instrument-construction-amp-repair/
@finniefletcher42794 жыл бұрын
I am going to make this at some point.
@theyetigamer4343 жыл бұрын
That looks amazing! I want to make one but reeds look expensive. How much did you pay for yours?
@cas_creations3 жыл бұрын
Thanks! There was little to no expense involved in this concertina, as many of the parts were made from household materials (i.e., heat sink aluminum from old computers, random scrap metal, paperclips for springs), and the reeds came from an old accordion I had around, so the price really depends on the amount of scrap you have lying around. On my second concertina, I salvaged reeds from a broken accordion found on eBay (which is my recommendation for sourcing reeds given you have some reed-working abilities, as buying reeds by themselves is often more expensive), so the bulk of the expense there was from that.
@sziluchannel7 ай бұрын
Thank you for the video, nice instrument! Could you share your plans? I am planning on building an duet concertina, and it seems like there are no plans with dimensions online.
@cas_creations7 ай бұрын
Thank you! I don't have plans at the moment but I do have a crane duet build video on my channel as well.
@MandolinSunrise3 жыл бұрын
Another excellent vid, thanks again. I was wondering, the aluminium axle/stud, how are they holding out? Is there any way to make rivets from steel nails?
@cas_creations3 жыл бұрын
Glad you like it! I haven't had any problems with the aluminium rivets a year+ later (this concertina was built in the summer of 2019), though it is true that traditionally harder metal such as brass is used (though brass is still a relatively soft metal). What's nice about aluminum is that it is easy to shape with a hammer, so square-profile aluminium from something like a heat sink can easily be formed into a round hole and it will very effectively clamp the lever to the post. I expect that steel nails could work too, such as finishing nails, but as it is harder to shape than aluminium, it would be important to create a hole that fits very tightly around the nail to eliminate wobble.
@kidneykid9 ай бұрын
Awesome video! How did you make the reeds?
@bveracka7 ай бұрын
That was my number-one question. I've had a go at making my own (see my comment), and part of the reason why I put it on the back burner was because of the reeds. I just couldn't get the sound I wanted; I can tune free reeds with some level of proficiency - I wouldn't have a go at a big chromatic accordion but I can do harmonica and cajun accordion reeds - but actually _making_ reeds from scratch is a whole other mountain I've yet to climb. Even if he bought them, the result of his project is truly amazing. I've never seen anyone make an accordion or concertina in their home shop like this. It makes me want to have another go at mine.
@Oleg7212K7 ай бұрын
Excuse me, could you tell me, how much will it cost, to get plans and dimensions to make this instrument by myself?
@cas_creations7 ай бұрын
Thanks for your interest, but I don't have plans available for this instrument at the moment
@Oleg7212K7 ай бұрын
Thank you for your answer, it’s a little bit sad (I am talking about plans). The instrument you have made is pretty good, great work 🤝
@bveracka7 ай бұрын
@@Oleg7212K It's not _really_ hard to make the box, buttons, etc. so you can easily copy whatever design you like best and just build it based on pictures - that's not the hardest part. The real difficulty comes with getting the action just right (when you press a button, you need it to work), and also making your own reeds and tuning them properly. Having plans wouldn't help you with either of these things. I hope that helps to motivate you to try it. I've gotten about 75% of the way with mine, and this guy's shown it can definitely be done! There's just not a lot of info about how to do it online; you have to really dig for it.
@Oleg7212K6 ай бұрын
@@bverackaHello, I already started from the bellows. 😁
@bveracka6 ай бұрын
@@Oleg7212K Awesome! I hope you complete your project eventually. It's _so cool_ to know that people are building their own concertinas, since the Chinese-made ones are terrible. Also, when it's finished, you'll know how to repair or modify it since you built it and know every part of its inner workings. I've dreamed of making my own 1-row / 10-button diatonic accordion, which is a similar project with very similar construction. TLDR: _Mega-_ kudos to you for starting! Upload a video when you start making the other parts and show it off! 👏
@genaromorales69462 жыл бұрын
I'm heavily considering making one. Any suggestions on where to find the reeds?
@cas_creations2 жыл бұрын
I got mine from an old broken accordion. Try to find one with aluminum reeds (usually newer accordions), as some of the really old models have zinc reeds which add to the weight of the concertina considerably.
@gatowarden2333 Жыл бұрын
Where do you get those white things with the yellow rectangles?
@cas_creations Жыл бұрын
If you mean the reeds, I got those from an old accordion. Try to find aluminum ones rather than zinc for weight purposes
@gatowarden2333 Жыл бұрын
@@cas_creations OKay
@saintgoar9869 Жыл бұрын
did these reeds come out of a push button accordion as opposed to a piano accordion?
@cas_creations Жыл бұрын
Just regular old aluminum piano accordion reeds
@saintgoar9869 Жыл бұрын
@@cas_creations does it play different notes on the push and pull? I thought piano accordion reeds played the same note?
@cas_creations Жыл бұрын
@@saintgoar9869 I tuned each reed tongue on each reed differently to achieve bisonority. Before doing so, the reeds played the same note on the push and pull