Door Lock amzn.to/3yelBez Door Hinges amzn.to/41LP3Gq

The suspense is killing me. I can't wait for Matt to put the "Beware of the badgers" sign up again! Great series...

I love how the cladding appears 3 minutes in 😂😂😂.

Sorry Matt, but tha's just wrong.... A new door without a "Beware of Badgers" sign.... Have you got no shame man?😁😁😁 Great video! Looking forward to see the full workshop. All the best!

The door was a nice idea but you need to install another piece of timber on the door to cover the gap from door to frame. This piece of timber will help stop the door pushing past the frame but more importantly cover the bolt on your lock. At the end of your video it was very easy to see where the lock was, a nice gap to get a pry bar in there if you want to gain access or the perfect spot for a grinder to slot in and cut the bolt off. Easy access to your shed then. Also invest in a set of hinge bolts. They cost under a fiver but will stop someone attacking your external hinges and gaining access.

The door cane out great! Strong, sturdy and beautiful! Thanks for sharing!

Now on to the next!

You should paint a brace on the inside of the door, for strength ha ha. The shop build is Looking good!

Have to say, that looks pretty dammed good. 👏🏾👏🏾

Digging the slab foundation for my workshop and this series has been great! I've also made my own plywood door recently but used cheap CLS studs edge on to make a square frame. I used a grooving blade to cut a groove for the plywood and then put it together and screwed the frame tight. Looks great and much easier than arguing with the brace police if you make a slotted door 😅

I like your hat 😂, seriously though you've done a brilliant job 👏

Hi matt, Love the shed/workshop, just one thing as your door opens out wards, you might want to do is add a few hinge bolts to the hinge side of your door as it is easy to knock the pins out of the hinges and pull the door open,

Really enjoyed longer format. Workshop looking great

we just put the latch cover on backwards and knife round it, bang on every time

Perhaps if you made a door another time id put a rebate into the frame. As it is now you have a gap around the perimeter of the doors and rain will blow in or run into. You can also add draught proofing the the frame with a rebate to keep it warmer in there and keep the sound in. It’s also an idea to put a 9 degree angle on the sill of the frame to stop water pooling and running into the shed. A weather bar on the bottom edge of the door can also help prevent this which is a preventative step you could take now it’s built.

👍👍👍Thanks

Oow, that woodshop is coming together nicely! Nice project, Matt! I think I'd have encountered the same "it is not a mistake it is a feature"-problem 😄

Matt! It will not be a finished door, or a workshop for that matter, without a proper ‘*beware of the badger*’ sign, like you had on shop doors before now. Other than that: lovely work! Also good to see some color, was wondering about that.

Great!

Nice job of making the door, I loved your design features. I often look at Proper DIY also a great channel. Looking forward to the inside work. Take care Mark

Nicely done Matt, I particularly like the detail you added with the battens and that they more or less line up with alternate ridges of the cladding ! With that shallow pitch roof and the cladding it's looking a little like a shipping container build, and that's not a criticism - looks great !

You make it look easy and I know from building my own shed a few years back that it isn't, especially if you are working alone. That mortice lock went in like a dream. Looking forward to watching you work on the interior. Thank you.

Splendid stuff!

Looks brilliant Matt you have done yourself proud with the building of this shed, don't forget to put up your Badger Sign before you finish. Stay Safe. Barry (Wirral)

Great job, I really like the board and batten look on the door.

Fantastic. The new workshop is really taking shape. Love it!

Loved this series Matt. Looking forward to seeing you back in a proper workshop.

Awesome to see you walk in your new workshop at the end! Finally back to some normalcy

Hey Matt, I hope you're doing well & have fun in your new workshop. Cheers :)

Nice to see it coming together Badger! Gonna be a decent space.

It's looking really good. I'm looking forward to seeing the inside being insulated and finished

Very nicely done. I am enjoying the workshop build, thanks

Ollie’s (Bradshaw Joinery) hinge jig is genius. So simple it is ridiculous! Coming on mate. I have some workshop banter podcasts to catch up on now the six nations has finished and I am not binge listening rugby 🏉, 👍🏻

This has been such an exciting journey! Can’t wait to see the inside!

Brilliant Matt. You explain things so well they are easily understood. Take care Matt. Cheers, Huw

Loving the beard-grow progress in the video, suits you well! And the teaser at the end was a nice touch, excited to see next episode. Will you be doing a tour of the new workshop once it all done and decorated?

Badger, you make this build look easy! I noticed that you used ply wood to build the door and painted over it . Won't the ply swell up and get ruined by the rain or damp weather?

Thats a mighty fine door to go with your fab new workshop Matt

Are the pins on the hinges not a vulnerability security wise? Loving the new workshop build.

I'm really enjoying this build Matt, lovely job and looking forward to the reveal. Well done Sir.

Looking great Matt, looking forward to the finished space.

Loving this series, the building looks great 👍👍👍👍

Enjoying this series of videos Matt you've done a great job

Will u do a full price brakedown? Would be very intrested to know how much its all cost. Thanks.

Nice build Matt. Have you consider the security of the shed if you’re going to be storing tools in there? I’d recommend replacing those screws on the hinges, lock and frame with some longer/thicker ones as they’ll put up more resistance to attack. Any protection you can add to the hinges will also help as with a outward opener they are you weakest point. You may consider a multi locking strip further down the line which you can probably fit to that door retrospectively or a metal skin to protect the wood from attack.

Fair play …you bring DIY to a new level…especially “Y” ….great watch

Its looking good man well done Oh dont forget to hang the Badger workshop logo on the out side of the door ,

Great video again Matt. I want to move so I can build my own workshop 😁

Exciting to see whole workshop done 🎉

Great workmanship throughout 👍👍👍

Its looking really good Matt, I bet you are much more satisfied at building this workshop than if you’d have bought one ready made. This is much more robust. And at 3:03, magic cladding appears all round the shed, oops, continuity error!

Great progress as always!

Hi Matt, Very nice work mate. You are definitely a happy chappy with the progress. Onya mate !!

Love it, nice and neat job👍

Correct me if I'm wrong Matt but shouldn't the vapour barrier be on the other side of door under the MDF sheet. Most of the moisture/water vapour is going to be created by you inside the workshop exacerbated further by any form of heating you may be using inside the workshop. Having the vapour barrier on the warm side will reduce the amount of moisture entering the insulation. Top job otherwise mate.

Great job!

Looks great. Can't wait to see the inside. Must be such a relief after spending the winter in that tent!

looking good hun xx

such a nice result!

Nice job.

Nice job Matt !! well done

Looking great Matt, and some really useful tips. Cheers.

Just a joy to watch, happy Wednesday ❤

looking forwarding to seeing the rest You suit the beard looks good. best Will

Nice, like the longer format.

Very nice! Can't wait until I need a new shed for my workplace, I'll build it myself this time, just like yours! Can't wait to see what you'll do inside!

The door trim is perfect ! All you need is to attach the "Badger" plaque : I hope you saved it.

You must be really happy about having a workshop again pretty soon ! Walls to screw things into ...

Beards coming along 🤘

Great workshop for you, would also make a great garden bar 😉

Fantastic work, Matt! The shop is looking great! 😃 You only forgot about the little plate... "Beware of the Badger". Or did you leave it on the older shop? Anyway, stay safe there with your family! 🖖😊

Good information and the blue looks great . Are the windows a security risk? As people will see what you are keeping in there thinking shutters will be good?

Good video Matt, but why didn't you hang the door on the left so it could be latched back against the front wall when fully open, rather than protrude past the corner of the workshop and obstruct the side access?

What particular screws do you use for the making the frames in the shed?

Loving this Matt.. It is a grand job. Are you going to give us a lowdown on the trend cordless router? Bob (Weston super Mare)

Hi Matt what was the thickness of the ply you used for your door

What model is the hand held router you used for the hinges?

Shouldn’t you have wrapped the door in tyvek? Or is marine ply?

Looking great Matt! Quick question, will you be doing anything about the door gap? Draught strips etc or are you using it as venting?

What’s the tape you used between the mdf back of the door panel? Love the panel look

You're going to bake in that black thing this summer.. especially without opening windows. Good job, otherwise! :)

Great job! Hope you'll find the "Beware of the badgers" plaque. I'm curious, do you plan to have a way to lock or unlock the door from the inside?

Hi Matt,,, barn paint have you used any colour other than black? Who makes Barn Paint?? I made a planter a year ago and the paint is used has not weathered well.. Barn Paint looks like it may be the answer.

How does the size of this shop compare to your last shop?

Great vid m8! I love the door build. What ply did you use for the outside, was it hardwood ply 3/4 inch?

Hi Matt, what's the total cost of whole project?

Matt is that barn paint the same as bitumen?

Just wondering how the door stays closed when you're inside. Do you plan to install a latch?

Which size wood did ye use for the door frame ?

shouldn't vapour barrier be on the warm side of the door (inside the room, not behind the insulation. moisture which goes through the insulation won't have anywhere to go because of the vapour barrier you created)?

Can I ask ?… why cut out the bottom sole plate from the frame then replace it with the door frame… why not leave it in place ?

Hey, you got to make your first sawdust in your new shed! However,I have fallen into a devil-may-care attitude towards the alleged dangers of badgers. So has my dachshund. Surely the lack of a little sign on your workshop door has nothing to do with it. Right?

the last one I watched was you fitting cladding so why are they not in the right order as no cladding in this one