Making a FLUID BED!
Рет қаралды 16,486
2 жыл бұрынMaking some fluid beds cheap and inexpensive to use with powder paint.
Music: KZfaq Music Library
@robertchadwick2925 Жыл бұрын
Thanks for sharing how you build your fluid beds.
@papabearoutdoors2393 9 ай бұрын
Just a heads-up, the Gorilla glue is water reactive. You can read it on the label. A slight smearing of water on the surface of your parts. will catalyse the glue and cause it to set quicker.
@B8N_Tackle 9 ай бұрын
Good to know, thank you!
@triadproit3259 2 жыл бұрын
You can get the end caps that fit right into the coupling. Use pvc glue to connect it. Great video!
@B8N_Tackle 2 жыл бұрын
Thanks for the tip bro! Appreciate your support! 👊
@stillwaterbaitco 2 жыл бұрын
Cool video, I had no idea what those were until I saw it. Seems like an awesome way to coat jig heads.
@B8N_Tackle 2 жыл бұрын
I had been told before that they weren't worth it but found recent that they work well with certain thicker powder paints.
@bradz4363 Жыл бұрын
Gorilla glue is water activated. You are supposed to wet the area before gluing. No water defeats the purpose of using gorilla glue
@OS-po4hf Жыл бұрын
filter paper for brewing coffee, may work better
@huxmetalworks7371 3 ай бұрын
Great work I am new here but I think you do great work i have a question what is the length of your cup thinks for sharing
@B8N_Tackle 3 ай бұрын
I will let you know when I get in the shop, I want to say like 3 inches.
@B8N_Tackle 3 ай бұрын
2 and 3/4 inches
@biggybrocosta 2 жыл бұрын
How far down do you push the cup into the base to seal it? Are you still using the lunch bag as your filter or did you find something else that works better, I’m having issues with solid colours volcanoing all the time.
@B8N_Tackle 2 жыл бұрын
Hey Mike! Thanks for the comment! I push the cup all the way down in as far as it will go, you may need to sand or trim the edge of the cup and paper to get it in there, but you do still want it snug. I don't use these with solid color paints only the thicker 2 colored paints. I have the Volcano effect as well but when I turn down the air that usually goes away. I have stuck with paper bags, but if you find a better material please let me know, I feel like it's just a touch too thick.
@triadproit3259 2 жыл бұрын
I use printer paper
@kevinmcglothlin7347 6 ай бұрын
I have a 5 to 30 gallon fish tank air pump. Just curious as what you use. I’m new to powder coating and just trying to get a feel for the appropriate materials
@B8N_Tackle 6 ай бұрын
That should work fine bro! The amount of air will depend on how many cups you want to run at a time. I usually just run one or 2 at a time.
@krzysztofnowak6770 2 жыл бұрын
WITAM SUPER FILMIKI ROBISZ DOBRĄ PRACĘ POKAZUJĄC RÓŻNE TECHNIKI . MOJA PRZYGODA Z WYLEWANIEM GUM TO DOPIERO POCZĄTEK ,CHCIAŁBYM SIĘ DOWIEDZIEĆ GDZIE MOGĘ KUPIĆ TE SZCZYKAWKI ALUMINIOWE DO ODLEWU CZY POSIADASZ JAKIEŚ STRONY INTERNETOWE JESTEM Z POLSKI POZDRAWIAM KRZYSZTOF
@B8N_Tackle 2 жыл бұрын
Najpierw bardzo dziękuję za miłe słowa! Nie jestem pewien, czy którakolwiek z witryn, na które chodzę, aby wziąć polskie kredyty. Paypal byłby najlepszym wyborem. Dużo zamawiam od Epic Bait Molds i Angling AI.
@OakfieldDon 8 ай бұрын
Having trouble trying to find the top lid that will keep the powder intact when not in use. The Home Depot guy gave me the same thing used for the bottom of the base. It don't look or work like yours. What exactly are you using for the top lid? Where did you get it?
@B8N_Tackle 8 ай бұрын
Test caps that match the same size pvc. www.lowes.com/pd/Charlotte-Pipe-2-in-x-2-in-dia-PVC-Schedule-40-Spigot-Test-Fitting/3357826
@OakfieldDon 8 ай бұрын
@@B8N_Tackle Thank you. I'm going there tomorrow. Also. I ordered filters from TJ can't wait for them to arrive. Thanks on that too
@OakfieldDon 5 ай бұрын
Finally got everything set up using 4 inch pvc with TJ Tackle filters. I Filled it halfway. I readjusted the air. But, I can't get it to rise nowhere near the top without the volcanos spilling out it first. What am I missing?
@B8N_Tackle 5 ай бұрын
Filter media may be upside down, also you definitely need to seal the media to the bottom of the cup all the way around, if you don't you will get volcanos in specific spots
@OakfieldDon 5 ай бұрын
@@B8N_Tackle So it's shiny side up. Right? And I used epoxy resin to seal it. I made 4. I'm gonna try another one tonight when I get home from from work.
@B8N_Tackle 5 ай бұрын
@ThoughtManifest FYI, did you mean 3 inch, I'm not aware of a 4 inch. But yes I did Shiny side up and they worked great for me. But also keep in mind not every color powder paint is created equal, I still dip my blacks and white because they are a heavier powder and don't fluidize as well.
@OakfieldDon 5 ай бұрын
@@B8N_Tackle I was referring to 4 in long. For some reason, the air valve hole on yours looks higher up than mine. Also, I did test it on black high gloss powder.
@B8N_Tackle 5 ай бұрын
@ThoughtManifest yeah black does volcano, it's very heavy
@darrellhaeker4417 Жыл бұрын
What are the base caps and what is the source?
@B8N_Tackle Жыл бұрын
The base cap is a 3" test cap from home depot or lowes.
@donaldmatthews7572 Жыл бұрын
Where do you get the caps?
@B8N_Tackle Жыл бұрын
Home depot or lowes in the plumbing section.
@morrowoutdoors1336 Жыл бұрын
Where do I find the valve
@B8N_Tackle Жыл бұрын
I bought those at a pet store, fish tank air bubbler stuff.
@mikef9966 2 жыл бұрын
lay paper down ,if u spill just pick up paper and pour it back in
@B8N_Tackle 2 жыл бұрын
Thanks bud!
@djradrs199 2 жыл бұрын
watch Adams Videos (SDG Custom ) his fluid bed videos he has a SWEET set up
@B8N_Tackle 2 жыл бұрын
Haha I watch all of Adam's videos.
@B8N_Tackle Жыл бұрын
I could see maybe using 2 or 3 at a time for different color combos but I agree that thing is insane! Cool as hell just to make it though! Much love to SDG he is the man!
@djradrs199 Жыл бұрын
@@B8N_Tackle I made a 4 cup version with a manifold like Adams and have a couple extra cups to easily swap colors 👍👊😎
@B8N_Tackle Жыл бұрын
@@djradrs199 awesome man! I need to sit down at some point and make more cups.