MAKING A STEEL LUMBER RACK FOR MY TRUCK (Part 1)

Рет қаралды 54,935

4 жыл бұрын

After just upgrading my work vehicle I knew I had to build a sturdy rack to accommodate the various materials that I regularly transport to and from the workshop. In this video I build the headache rack for the truck which will be followed up with a part two when I get the chance to fabricate the rear upright portion of the rack. Thanks for watching guys and I hope you enjoy the video!
MUSIC:
Hold Me Down - Camaro
Seven Days - Friday
Bloom - Promised Land
Rex Banner - Freedom
The Beginning - Imagine
MY WEBSITE: beyrer.co.nz/
FOLLOW ON INSTAGRAM: beyrer_besp...
FOLLOW ON FACEBOOK: / beyrerbespokefurniture

Пікірлер: 64

@stallionranchwoodworks 4 жыл бұрын

Fantastic job, looks professional for sure.

@Beyrer_Bespoke_Furniture 4 жыл бұрын

Cheers mate, glad you enjoyed it!

@stallionranchwoodworks 3 жыл бұрын

@Alexis Soren bullshit

@coryhalvorson8874 2 жыл бұрын

Simple fabrication, but excellently done. You are truly a craftsman with an eye for detail. Subbed.

@Beyrer_Bespoke_Furniture 2 жыл бұрын

Thanks a lot mate, I appreciate the support!

@TheKJVpreacher 3 жыл бұрын

Great looking rack! Looks like I found the right rack for my Ranger! Thanks for making this video!

@Beyrer_Bespoke_Furniture 3 жыл бұрын

Thanks a lot mate, I'm glad it helped you out!

@morgancaflisch-peryk1326 3 жыл бұрын

Excellent work, Looks great!

@Beyrer_Bespoke_Furniture 3 жыл бұрын

Cheers, Morgan!!

@anthonypropst1818 2 жыл бұрын

I have see the concrete block method. Damned effective. (Thumbs up)

@Beyrer_Bespoke_Furniture 2 жыл бұрын

Thanks Anthony, much appreciated!

@madskillz28 Жыл бұрын

Quality build great job.

@Beyrer_Bespoke_Furniture Жыл бұрын

Thanks a lot, mate!

@paulbird795 Жыл бұрын

This is amazing! Very inspiring.

@Beyrer_Bespoke_Furniture Жыл бұрын

Thanks a lot Paul, I appreciate it!

@willyd1127 2 жыл бұрын

That is an awesome job!

@Beyrer_Bespoke_Furniture 2 жыл бұрын

Thanks a lot!

@johnnychristensen5983 2 жыл бұрын

Looks great good job!!!!

@Beyrer_Bespoke_Furniture 2 жыл бұрын

Thanks a lot, Johnny!

@butchthurman4685 6 ай бұрын

Nice job looks really nice.

@Beyrer_Bespoke_Furniture 6 ай бұрын

Thanks a lot mate!

@CNTHINGS Жыл бұрын

Cool build! Gave me a few ideas thanks

@Beyrer_Bespoke_Furniture Жыл бұрын

Cheers mate, glad I could give you some ideas!

@joseesparza2345 Жыл бұрын

The rack looks very professional, good job👍👍👍👍👍👍

@Beyrer_Bespoke_Furniture Жыл бұрын

Thanks a lot mate, glad you like the build! ✌🏼

@robertmcmahon1221 Жыл бұрын

Very Good.

@Beyrer_Bespoke_Furniture Жыл бұрын

Thanks, Robert!

@luismasolis8354 Жыл бұрын

Hey my dude, thanks, got a few great ideas and motivation. Greatings from Costa Rica

@Beyrer_Bespoke_Furniture Жыл бұрын

Hey mate, that's great to hear. I'm glad this build gave you some inspiration!

@CycloneDefender 4 жыл бұрын

This is sick bro!

@Beyrer_Bespoke_Furniture 4 жыл бұрын

Thanks man, much appreciated!

@hilariongarza2390 Жыл бұрын

Te quedó chingona, felicidades. ( en Mexico algo chingon es muy bueno)

@Beyrer_Bespoke_Furniture Жыл бұрын

Muchas gracias, compañero.

@mathiasfariassalas3871 2 жыл бұрын

gran diseño,, me suscribi y like

@Beyrer_Bespoke_Furniture 2 жыл бұрын

Gracias, Mathias!

@victorgomez7353 2 жыл бұрын

saludos desde Panama

@Beyrer_Bespoke_Furniture 2 жыл бұрын

Gracias por ver a Victor

@lemkiwoz 3 жыл бұрын

Choice bro

@Beyrer_Bespoke_Furniture 3 жыл бұрын

Thanks, Laurence!

@juliotapia4098 11 ай бұрын

Te felicito quedo muy bueno , de qué medida es el perfil de acero que utilizaste para el rack

@Beyrer_Bespoke_Furniture 11 ай бұрын

Thank you! From memory I believe it was 50mm x 50mm tubing.

@juliotapia4098 11 ай бұрын

@@Beyrer_Bespoke_Furniture muchas Gracias

@harleyjerram9699 3 жыл бұрын

Hey mate, looking at doing something similar. Where did you purchase the materials? (I also live in NZ) cheers

@corybeyrer1039 3 жыл бұрын

Hey mate, I usually get all my steel through Steel&Tube. 👍🏼

@levibridge9515 3 жыл бұрын

What was the plastic piece? Cool build. Anything you wish you could change on the build?

@Beyrer_Bespoke_Furniture 3 жыл бұрын

Hi Levi, thanks for the comment. It was a piece of UHMWPE Black plastic which I decided to attach as protection for the paint as loading and unloading timber from the rack would eventually scratch and damage the paint. After using it for the past few months I am pretty happy with the final result and so far there aren't any changes I would make to it.

@levibridge9515 3 жыл бұрын

Any problems with it chipping? I like the reasoning behind it

@Beyrer_Bespoke_Furniture 3 жыл бұрын

No, not at all. I went for a Thermoplastic coating so it could be sliced or cut through but doesn't chip and I have been told that any areas where steel does get exposed won't let moisture underneath the rest of the coating. Hope that helps!

@69soulseeker Жыл бұрын

What type of metal/wall thickness did you use?

@Beyrer_Bespoke_Furniture Жыл бұрын

Hey mate, I used 50x50mm steel tube with a 3mm wall thickness for this.

@franciscoarango928 2 жыл бұрын

how much angle did you give to the studs

@Beyrer_Bespoke_Furniture 2 жыл бұрын

I angled the two uprights as close as I could to the shape of the cab which ended up being about 20 degrees.

@lancianotransportllc2065 2 жыл бұрын

What thickness steel tube did you use?

@Beyrer_Bespoke_Furniture 2 жыл бұрын

Hi mate, I used 50x50mm steel tube with a 3mm wall thickness for this.

@WakingUpSux 5 ай бұрын

@@Beyrer_Bespoke_Furniture cheers, wondering what you eyeball the capacity is with those materials? thinking about making my own, rated around 700kg.

@Beyrer_Bespoke_Furniture 5 ай бұрын

@@WakingUpSux Not 100% sure on capacity as I am no engineer but I have carried some heavy loads of plywood and packs of hardwood on this rack with no flexing so I'd say you wouldn't be far off with 700kg. Best of luck with your project mate!

@WakingUpSux 5 ай бұрын

@@Beyrer_Bespoke_Furniture Much thanks brother!