Making an industrial oak and steel coffee table

Рет қаралды 81,746

3 жыл бұрын

I made this table from 5x9cm (2 x 3 1/2") oak stickers used for drying lumber. After drying them for a while, it was time to turn them into something nice. This table is a first piece of furniture I'm making for my future house I'm planing to start building this year. I started by planing two sides of each slat on a jointer. Other two sides are planed down on a planer down to final dimensions of 4.5x7 cm. Some of them were quite curved so it took a while.. I used d3 polyvinyl acetate glue to glue the slats together into a block. Block was planed on a cnc. Sides were trimmed down and grooves for steel legs were also milled. Legs are made from 8x100mm hot rolled steel welded into rectangular shape. 8mm screws are welded to the underside of the rectangles and they hold the table board . All the corner welds were grinded down and left visible trough polyurethane matte varnish. Wood is sanded first with belt sander with 100grit sandpaper, then with orbital sander with200 grit and finally by hand in between coats of varnish with 240 grit. Varnish is semi matte water based acrylic.
Thank you for watching and don't forget to like and subscribe! :D
My instagram: lignum_chan...
My facebook: / lignumchannel
Website: www.lignum-art.com/
Music:
Sonatina No 2 in F Major Allegro - Joel Cummins
Sonatina No 2 in F Major Rondo - Joel Cummins
Sailor's Song - Joel Cummins
Sarabande - Joel Cummins
Intro music: Danse Macabre - No Violin by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: freepd.com/Classical/Danse%20M...
Artist: incompetech.com/

Пікірлер: 135

@LesterSuggs 3 жыл бұрын

Sweet baby nascar Jesus, this guy has serious heavy duty equipment.

@lignumchannel 3 жыл бұрын

@chefdan87 3 жыл бұрын

That's what I think every time i watch one of his videos. "I don't know if I'm more impressed by his projects or the kickass tools he has...."

@drmkiwi 3 жыл бұрын

Nobody is going to mess with that table - it looks like you could drive a truck over it and it would still be good. Ouch to the robot attack! Amazing you can get such nice timber that was 'scrap' previously used for stickers. Thanks for the video. Cheers, David

@maxgruber9883 3 жыл бұрын

Amazing as always! Love all your stuff!

@hmstjohn6236 3 жыл бұрын

Wow, simply amazing work.

@markodjukic7666 3 жыл бұрын

Simplistic, but beautiful design.

@lignumchannel 3 жыл бұрын

Glad you like it! Thank you!

@robertevans6481 3 жыл бұрын

Have not seen a table like this one,well the mounting of the legs,very cool....and a second thumbs up for 😻

@lignumchannel 3 жыл бұрын

Thank you very much Robert! I knew the cat would be the star of the video :)

@JT-hw6mq 3 жыл бұрын

Awesome. Best use of a garden tool I've ever seen- glue scraper! And the cat is awesome too.

@lignumchannel 3 жыл бұрын

XD Yeah it is! The craper too ;)

@ivanwalker3391 3 жыл бұрын

Absolute class! Always!

@Wingnut_Stickman 3 жыл бұрын

It helps to keep your wits about you when pushing across a 24" unguarded jointer. Later, chainsaw juggling.

@prokogo 3 жыл бұрын

I’m so happy a have a channel, where I can hit “like” button even before the watching the video!) This time it was an evil attempt of a robot to grab the power over human. I always knew there is something doubtful in them, Futurama taught us well!

@onepairofhands 3 жыл бұрын

looks great guys - cool result

@ellieboa 3 жыл бұрын

beautiful! happy new year, and can't wait to see the house build!

@lignumchannel 3 жыл бұрын

Happy new year Ellie! I'm really looking forward to the building process.. Cant wait to start!

@BernardSandler 3 жыл бұрын

May your new home bring delight and wondrous memories. Loved the video as always. Really enjoyed the interludes of timelapse paint drying. New perspective! Hoping that bit did not leave too much of a dent!

@lignumchannel 3 жыл бұрын

Still hurts a bit.. ;) Thank you so much Bernard for great wishes! I wish you all the best in the new 2021!

@erdetm 3 жыл бұрын

What an awesome table!

@lignumchannel 3 жыл бұрын

Thank you erdetm! :)

@TomsBackyardWorkshop 2 жыл бұрын

That massive jointer is terrifying.

@lignumchannel 2 жыл бұрын

Yes, quite so, but it makes you extra careful and focused when using it.

@kevinchamberlain7928 3 жыл бұрын

I so desperately want to work there! And that surface planer!!!! WOW!

@lignumchannel 3 жыл бұрын

Old, in between two wars machinery is the best! :)

@normanspragg5036 3 жыл бұрын

I love your glue scraper...... ;-)

@bartvanhalder11325 3 жыл бұрын

Just a small detail: i never thought of positioning a forstner bit with a scrap piece. Thank you for the idea!

@lignumchannel 3 жыл бұрын

Simplest solutions are the best!

@XTJ7 3 жыл бұрын

Also works with a hole saw if you accidentally used one that is too small and need to use a bigger hole saw - without a scrap piece it is impossible to center, with the right scrap piece it is... a piece of cake :D

@ive886 3 жыл бұрын

Awesome work! As usual

@lignumchannel 3 жыл бұрын

Appreciate that, thank you!

@johnymohny9089 3 жыл бұрын

Professional job well done

@renderwood 3 жыл бұрын

I do envy the gear you have at your shop. I even had to check how expensive is Kuka robot, 55k€ it seems. Please post more cool stuff like this!

@flingshotlife 3 ай бұрын

I just ran into your channel! SWEET A$$ robot arm! Okay I will Follow you. Hunt the Good.

@AlvarroLB 3 жыл бұрын

nice design!

@davidegaleotti94 3 жыл бұрын

Happy new year! Nice project as always :D

@lignumchannel 3 жыл бұрын

Happy new year! I wish you all the best in 2021! Glad you like the project!

@user-be6jl6sc3y 3 жыл бұрын

Good job and cool music for video 👍😂 oh, the cat is best

@wayphun72 3 жыл бұрын

I am always so impressed with the creativity of your projects, how do you come up with all these designs?!

@keranzhuo2640 11 ай бұрын

This table arrived well packaged and on time. kzfaq.infoUgkxn94T8Mu1iMnsLCMNOI9srXSsLkI4JXKW Like another reviewer advised, I pulled everything out and made sure everything was included (everything was!). I built it alone and it took me about an hour. The color is great and for the price the lift part works well. As others have mentioned, it’s not the smoothest opening/closing, but it works. The screws do show, but I plan to order white sticker covers if that bothers us too much. Really happy with this table! UPDATE: it’s been over a year since we got this coffee table and we still love it! It gets HEAVY use as our dining table, foot rest, and school desk. Over time, the opening and closing mechanism has gotten smoother. I added a new photo with the white screw cover stickers. They blend in perfectly and make it look a little cleaner. 100% recommend!!!

@DanielH 3 жыл бұрын

Love it.

@lignumchannel 3 жыл бұрын

Thank you Daniel!

@patrik5123 3 жыл бұрын

Very cool design

@lignumchannel 3 жыл бұрын

Glad you like it, Thank you!

@craftandhandmade68 3 жыл бұрын

i like the video also the music specially Sarabande

@suzukilive6272 3 жыл бұрын

Very very nice 👏👏👏👏👏👏

@lignumchannel 3 жыл бұрын

Thank you! Cheers!

@cymepku8163 3 жыл бұрын

2:36 - Классное применение тяпки ))

@spawacz34 3 жыл бұрын

With a scraper like that i too could make such beautiful projects...

@Vitalii_Libertas 3 жыл бұрын

Шикарно!!!

@bozidarskobalj3166 3 жыл бұрын

for the cofee table raw it can corner bend too looks even more with structure align

@chrisdoucs 3 жыл бұрын

Wow, Coool !! ;- )

@krpi007 3 жыл бұрын

Topčina!

@viorsa8200 3 жыл бұрын

Una mesa divina de la muerte,el estilo industrial es genial,un poco bruto para mí gusto,si tienes que mover la mesa o le pones ruedas o usas un transpalet ,un saludo cordial y por supuesto un gran like desde Narón, Galicia ( España)

3 жыл бұрын

Very nice 👏👏

@lignumchannel 3 жыл бұрын

Thank you very much!

@GnosisMan50 3 жыл бұрын

A lot of wood for a small table but very nice nevertheless. I really like the legs too. It gives me some good ideas of my own.

@lignumchannel 3 жыл бұрын

Glad you like it! Thank you!

@user-bv8ou1wu7k 3 жыл бұрын

Отлично. Простым людям, среднего достатка будет сделать проблематично... Очень красиво...

@user-gx5xc7ot5h 3 жыл бұрын

Это был стёб?

@user-bv8ou1wu7k 3 жыл бұрын

@@user-gx5xc7ot5h нет.

@keithspencersr.6806 3 жыл бұрын

Outstanding work, but strong enough to be a shop workbench.

@user-be4cn5qx4s 3 жыл бұрын

2:36 LoL you have robot hand's but still use this tools😂 Awesome table.

@oldmanfromscenetwentyfour8164 3 жыл бұрын

Good thing you didn't nail your head into that bit! Welcome to the Head Bangers Club! Excellent work as always! Planning on making Videos on your home construction?

@lignumchannel 3 жыл бұрын

Yeah, good thing I have a thick scull ;) Yes I plan to film each step and make a series of it.. I might even start talking ;) Glad you like the video!

@sirindekorist 3 жыл бұрын

👏

@ehudmigdan 3 жыл бұрын

First!!! Love your vids

@taylornieves5420 3 жыл бұрын

No buddy, sorry to say.

@lignumchannel 3 жыл бұрын

:)Almost, but thank you !

@rigo6156 3 жыл бұрын

The look on his face after the Kuka punched him. 😂😂😂😂😂

@lignumchannel 3 жыл бұрын

Shock of the year so far.. :D

@chakireladraoui9331 3 жыл бұрын

👍❤👍❤👍❤👍❤👍❤👍❤👍❤

@byeongjlnlee2855 3 жыл бұрын

🤩

@micaheckenfels533 3 жыл бұрын

Very impressive as usual! Do you happen to know what kind of surface planer that is? I love that it has the additional vertical spindles.

@nicolek4076 3 жыл бұрын

There is nothing that cannot be improved by the introduction of a cat.

@RobsonWilliam82 3 жыл бұрын

But none of that would be possible without hot glue! 😂😂

@lignumchannel 3 жыл бұрын

Both correct! :D

@arlingtonhynes 3 жыл бұрын

Beef stew?

@msmith2961 3 жыл бұрын

The unguarded jointer?

@user-xk6nd8lq4i 3 жыл бұрын

🎄👍

@elizabethb913 3 жыл бұрын

Glad you survived the robot attack to finish this beautiful design. I see that robot (or other) attacks are the same in any country: Object: *is stationary* Human: bumps into object Human: gives mildly offended and accusatory look at said object

@lignumchannel 3 жыл бұрын

XD I' really laughing at loud right now! Yup, That's exactly how I felt.. Why would you do that, why ?:D

@willofthemaker 3 жыл бұрын

Thats the biggest jointer I've ever seen

@jesseleal1388 3 жыл бұрын

Wait! So, there’s not only one, but two freaking robots here?!

@christopherbooth9077 3 жыл бұрын

Apart from the excellent work (all the way from the design to manufacture including robot programming! - that's some 'knowledge set'!) there's planning for and making a great video at the same time. I'd love to know what model(s) of Kuka robot those are, what Kw spindles are being used, and what programming software you're using, Lignum.

@FOMI1970 3 жыл бұрын

The robot got even for making him work so hard in your builds 😂

@lignumchannel 3 жыл бұрын

But they had a month long break while I was on a field project.. Maybe He was mad because I left them for so long.. :D

@muddyfences5559 3 жыл бұрын

Feel free to send the robot to me for a little discipline. No charge. Love the table.

@lignumchannel 3 жыл бұрын

XD Thank you Muddy! I think the bump hurt him as much as me ;P

@pietropal2424 3 жыл бұрын

Hi, very nice project. May I ask you exactly what product did you use to finish the steel parts? They looks really nice. What's "polyurethane matte varnish"? A link would be great, thank you!

@deniskenn 3 жыл бұрын

thats a scary ass jointer

@myroslavhabovda9115 3 жыл бұрын

awesome work!! If you dont mind me asking. what software are you using to run the kuka robot? Ive got one standing here in my shop and wanting to put on spindle and use the robot. thanks

@mogicano 3 жыл бұрын

Mucha máquina para reverenda mierda!

@weberwoodshop 3 жыл бұрын

Cool table, but I’ve never heard of “INDUSTRIAL OAK AND STEEL COFFEE” ...Is that what you give your giant CNC’s in the morning??? PLEASE TELL ME WHERE I CAN GET SOME!!!

@lignumchannel 3 жыл бұрын

:D Yes and the quite enjoy it ;) Glad you like the table Blake!

@kasicaprasica573 3 жыл бұрын

Veoma lepo odradjeno sa mnogo preciznosti. Hoće li biti gitare?

@lignumchannel 3 жыл бұрын

Hoce, dvije su trenutno u izradi.. Hvala Kasica! :D

@rogercortes7669 3 жыл бұрын

4:30 ouch.!! 🤭😁😂🤣🤣🤣🤣🤣 that surely hurts.

@lignumchannel 3 жыл бұрын

It was more of a shock than pain :D

@rogercortes7669 3 жыл бұрын

@@lignumchannel hahaha 😂

@martinblazevski2736 3 жыл бұрын

Yuri what did u use to coat the metal? And all the respect from me as a classical musician/furniture builder for finishing the vid with Hendel's Sarabande!

@TheArtificiallyIntelligent 3 жыл бұрын

This is lovely. Only thing I would change is me not having all those tools or a friend like you. Also, is that a HUGE glue up on the right at 1:25?

@christ186 3 жыл бұрын

I noticed that too. Damn I'd hate to move it and I have a commercial cabinet shop with a fork truck!

@ugglan3579 3 жыл бұрын

I am also wondering!

@lignumchannel 3 жыл бұрын

Thank you fwapcom:D Yes it's a glulam piece, we didn't glue this one though.. we ordered it from Austria. I't a project we are currently working on. It will be a part of a facade on wood technology center building and yes, I's a pain to move around..;)

@Jessegrey25 Жыл бұрын

Is MDF a good workbench top?

@peterc938 3 жыл бұрын

Ill phresh

@vladimiryan1335 3 жыл бұрын

Надеюсь, парень ударился не об фрезу! Берегите голову)

@erichbachinger943 3 жыл бұрын

In lignum veritas

@DrStudley15 3 жыл бұрын

Wow did you really just cut the top to size with a 2" router bit

@duncanevy 3 жыл бұрын

On 2 spindled industrial robots!!

@lignumchannel 3 жыл бұрын

Closer to 3" :D

@Automative 3 жыл бұрын

;o)

@doubledarefan 3 жыл бұрын

Next: CMC (Catuter Meowical Catrol) cat house climby tree.

@lignumchannel 3 жыл бұрын

@express375 3 жыл бұрын

Bro, I'm maybe 5 smacks in the face/head ahead of you. I would have had to bleep that part a few times. I bet there's still a lump ;)

@lignumchannel 3 жыл бұрын

:D yeah there is. I thought what the hell smacked me? XD

@intohouse 3 жыл бұрын

What sort of CNC/router is that?

@nateschmitz9827 3 жыл бұрын

it's a Kuka 6 axis arm I believe, I think he bought an old automobile production facility in a small country and converted into a woodworking shop, I could be wrong though!

@lignumchannel 3 жыл бұрын

:D you are close Nate.. Yes, it is a 6 axis kuka but we bought them from bmw factory in Germany and moved them to the workshop here in Croatia..

@user-yf9np2ke9i Жыл бұрын

วันนึงผมจะเข้ามาอยู่วงการนี้ไห้ได้

@anonimus_srb953 2 жыл бұрын

Dobar sto brate ,ako mozes da mi kaze dimenzije celicnog flaha i vrste drveta,hvala unapred🇷🇸☦️❤️🇭🇷✝️🇷🇸🤝🇭🇷

@kristian95iversen 3 жыл бұрын

Why use the robot arm to cut the table to size? Doesn't it seem a little wasteful?

@KarstenBecker 3 жыл бұрын

It appears to me that you are new to the channel :D He uses them for larger projects and complex 3D shapes. And as he got them when BMW didn't want them any longer, the price was probably very reasonable. Although for a lot of things a regular 3 axis machine would have also done, but really: Why not?

@lignumchannel 3 жыл бұрын

:D You are right Karsten! If I have it, why not use it..