I've got to stop watching these builds. I don't know which one to build FIRST ! WOW...I love these builds!!! THANKS FOR POSTING

People who have never gone through that with a bench grinder don’t REALLY know what it’s like to want a belt grinder. It’s like a rite of passage: you must wear out at least one bench wheel before you get a fancy belt setup.

Cutting, tapping, drilling, welding, painting - finally awesome belt grinder.

Great video and belt grinder! Such a tool make life easier :)

Dziękujemy za film. Świetna robota.

This goes on my ToDo list!! Great work!! Well done!!

Very nice! I started one about four years ago I really need to get back to it. You have given me a couple ideas.

It's crazy how much tools you can make yourself that are cheaper and better

You are a wery smart guy like made in poland 😎. Keep Up The god work.

Excellent job !!! I really like the design of this unit. Thanks for sharing.

Wow truly a nice simple effective machine. You should be very proud. I made one a couple years back just out of scrap and a treadmill motor. I had like 3 bucks in it and though it does still do a good job I thin it is time to do another one right. I will be blending a few that I seen Together but this is really close to what I want to build.

Wow! Great job. Thanks for sharing.

That is the greatest can opener I ever saw!

💪🏽💪🏽💪🏽💪🏽💪🏽wowwwwwwwwwww keep putting up all this great content man ure incredibly talented God Bless💪🏽💪🏽💪🏽💪🏽

very clever use of the plasmacutter, thanks for this brilliant idea !!

I learnt lot-lot by watching your videos! Thx

Thank you, especially for the dimensioned pics.

Good project to make with my everlast welder and some scrap metal. thanks for this.

After watching well made video production and quality builds I stumbled on this video and I’m like: boy that is some crude rough measuring and all… then I’m like… man that’s still better than what I would muster up. Good job

Wow... that thing is amazing. Great job!

That's one awesome grinder! Love the versatility.

Great job!!, and most of all, thanks for sharing your pics with the measures!!. That will help a lot. Keep it like that!!!💪

Awesome build man! This is the best how to that ever watched on a belt grinder! 👏👏

Dobra robota, szacun za wykonanie 👏👍

Wow! Beautiful work!

Great video one of the best belt grinders I have seen and also it looks easy to build with scrap metal

Un espectáculo, siempre sigo tus trabajos, sería genial un tutorial con las medidas. Exitos futuros.

That's what I'm looking for ...a sander that don't require a alot of out sourced parts..I like every thing to be in house

Love that Coke can trick! Great grinder!

Great video. You have some new innovations, particularly the use of a compression counterbalance instead of an expansion spring. Don't know why more people don't do that. Expansion springs break all the time. Since you don't have a mill you should use your plasma cutter more often. It seems to leave a nice clean edge. Loved that you slotted with it. Would have liked to have seen how it did on the curved slot. I really enjoyed watching you work. Looks like this 4th of the July weekend I'll be starting on mine. Sorry honey.

What an ingenious idea. Use a scissor jack to assist placement.

Me gusto la explosión de la cola; jajaja muy buena ; tu diseño esta excelente .. saludos.

I like the use of the jack.

Great job, thank you brother. You are so talented

I like this design. The circumfrence of the wheels on the grinding surface and backing plate should be colinear. This will ensure no space between the belt and backing plate. Your setup has about 1/8th space between belt and plate. This will give bevel grinds a radius.

absolutely love the colour scheme. I'll be starting my belt grinder soon and I'll be hard pressed not to do orange

Amazing job, dude! Really nice! 😃

Buying the motor for the one I’m building tomorrow! Fun build.

Came here from Made in Poland. A guy there had said you have a good channel yourself. He was right! I've subbed to your channel. BTW the coke can made me LOL.

szlifierka pierwsza klasa !! Profesjonalna robota

Good job❤❤❤

Very nice. Love the adjustability n using a ram instead of spring for tension. Maybe down the line you can wire in a potentiometer or a step switch so you can adjust the speed. Another great build though. I want one

Found the video I wanted, Great work and love it

וואו איזה עבודה כל הכבוד לך

Well done 👍 was excellent easy information

Bardzo dobra robota. Świetna maszyna do dalszych prac.

Your the friggin man this is so cool . Bravo genius genius !

Very much admired your work !!! Definitely like ;))) the Most simple project of grinder.

right that's it i realy need to get in the shed an start makeing stuff again!! been wanting to make one off these for ages as i make swords and knifes and i gring the blades on a cheep buggerd belt sander i now have to atach my drill to to get it to work!! that said it dose work fine could do with a bit more power though, not to much or i'll loose my fingers haha, love you videos!!

Great machine! One bit if advice: you need to turn the gas spring around so that the oil inside lubricates the seal!

Looks good!!

Beautiful work respect😁

nice job , bravo from middle East 🤗

Сколько просмотрел фидеороликов- этот самый простой в исполнении, орегинальный!!!

Man that works it's amazing, I'm from Argentina, I would like to try made one for me, it so possible to have we plans, to take the rigth measures. PD: THANKS for share this videos

Excelente trabajo, gracias por compartirlo 👍🇦🇷

Oh ya very good. Versatile!

Dewalt, Hitachi, Porter Cable and Bosch downvoted this video. Amazing work !

Yup, I am going to construct me one of those. All I need is the steel, a welder, and hardware. Lmao

genial muy buen trabajo

That is one of the best I have seen. I would love to build the same thing. Any chance you would provide some measurements and other necessary information? I am willing to pay for the info. Thanks for a great video.

great job man!

The further you get away from this belt grinder the better it looks!!!

ماشلله به این همه هوش👏👏🖒

Show de bola seria bom as medidas 👍👍👏👏👏👏👏👏👏👏👏

I would give more thumps up they won't let me! great build!!

bottle opener. perfect.

Very nice work. Congratulations.

Great project, sorry I missed your premier, had to work.!.

Oh, and the plasma cutter. Can't forget that.

Lustig meiner sieht fast genau gleich aus und ich hab auch nen Hochdruckreinger Motor

عمل رائع ومفيد

Great work. Next time you might consider plasma cutting the radial slot.

WOW!!! You put about 10 times more weld than actually needed. but it's an ok idea...

Excellent experience well done if I try I can do but I never done my self 👍👍👍👍👍👍👍👍👍

Видео огонь 🔥, особенно порадовал конец, лайк и подписка однозначно!))

Maravilloso trabajo amigo saludos

Very nice!!! Спасибо!

Интересная конструкция👍

Good job 👍👍👍👍👍

Good job. Ya gotta build a belt grinder; it's a rite of passage! Feel free to embed your video on our homemade tools forum :)

Mae excelente maquina...

Beautiful...... especially it's 45 to 90 degree inclination and vertical to horizontal setup

Awesome work! There's _always_ room for one more homemade belt grinder on youtube.

Good job!

Muito bom, já me inscrevi ,só uma pergunta tem como conseguir as medidas desta máquina?

Cool work 👍👏

Very nice work in belt grinder wow awesome idea I realy like this homemade belt grinder I sulute you 👍👍👍🤝🤝🤝

Well done bro! I like the design I all ready build mine from a copied version by made in Poland I think i will try to build your design next time and post the video on KZfaq.

Nice design. Just a note for people who are gonna build one after seeing this...you DON'T need THAT much weld bead on stuff!!! You'll probably save yourself a week of work and $50 in wire if you just weld things as much as they actually need to be, LOL :-D

I love these kinds of videos, I just wish there was a way to get the plans to build this. I would pay for them.

Top show de bola 👏👏👏👏👏👏👏👏👏👏

Thanks !! great job(s) .. Do you have plans available for your projects ?

Good job! Thank's!

Great work.

Nice Spark Generator you built :)

Very creative and nicely done!!! I thought I had been unsubscribed from Made in Poland for a minute...😁 New Subscriber!!!👍👍

Bom trabalho.

Another great build. Clearly you don't just start without having a design to work from. Do you work from a set of drawings that you have designed yourself or are there resources available online that you can download and use as a template that you can modify as you go along?

ciao very beautiful. have you had problems aligning the abrasive belt between the engine pulley and the others?