Making My First Bowie Knife
Рет қаралды 405
Күн бұрынI wanted to push my comfort zone a little and decided to draw out my own blade design and make a stacked leather handle, also a first for me.
This video is quite long, so I will show some time codes in case you want to jump ahead.
I have to give a shout out to my dear friend Dimitris Polychronis of @JimmysCanal who made the beautiful scriber and piercing saw I use in the video.
Music from Soundtripe.com
A3SGMVQIIYQSPFZ2
5XNS2GNFAZEDWXIR
OUWF4GREPBSD8XWX
00:00 - Intro
01:03 - Blade
04:19 - Heat Treatment
06:36 - Sanding
07:37 - Making the guard
12:01 - Making the handle
16:21 - Making the pommel
19:54 - Shaping the handle
22:48 - Dying the leather handle.
@TheRecreationalMachinist Жыл бұрын
Great work 👍 🇬🇧
@lawrenwimberly7311 Жыл бұрын
excellent job... I would have liked see the grind line go up farther on the blade.
@JimmysCanal Жыл бұрын
Although it's the first Bowie knife you're making, it really looks amazing. Excellent work, well done my friend!! Dimitris
@Ukenick Жыл бұрын
Thank you my friend.
@lawrenwimberly7311 Жыл бұрын
a good sharp razor knife for rough shaping, then rasp then sand, then burnish then soak in linseed oil... let dry, then burnish again
@Ukenick Жыл бұрын
Thank you for that. Very helpful.
@lawrenwimberly7311 Жыл бұрын
@@Ukenick no need to dye... Been doin this for 40+ years here in the US
@lawrenwimberly7311 Жыл бұрын
@@Ukenick If you look at my friends lit, you will find a lot of names you might recognize from the Forged in fire thingy.... I helped many of them along the way...Trenton Tye, Jeff Waggoner, James Helm, just to name a few
Dadsinhisworkshop
Рет қаралды 2,3 М.
AKADEMIA BRONI
Рет қаралды 20 М.
MaxxPC
Рет қаралды 1,3 МЛН