Making Router Lift II DIY Router Table lifting attachment

Рет қаралды 233,568

2 жыл бұрын

In this video I will show how to make router lift attachment for router table. Lift made with comfortable height regulation from side without extra tools for fast and easy use.
Project plans;
drive.google.com/drive/folder...
Links to parts I used:
Bevel Gears- s.click.aliexpress.com/e/_DE1...
KFL08 Bearings- s.click.aliexpress.com/e/_Dmn...
LMK12LUU Linear Bearings- s.click.aliexpress.com/e/_DCA...
688ZZ Bearings- s.click.aliexpress.com/e/_DDs...
12mm Stainless Steel Rod- s.click.aliexpress.com/e/_DDs...
Link to router I used in this project: amzn.to/3wm456y
#craftydude

Пікірлер: 89

@howardnd9043 Ай бұрын

Ingenious. All I could think of at the end was "a child could do it". But somebody had to come up with the idea to share with the children. You are that guy. My next project as soon as I finish the build of my router table, which is about three hours from completion. THANKS!!!

@avilamedrano107 Ай бұрын

Agradecido por darnos los planos y sobre todo las diferentes piezas con enlace. Muy generoso por su parte. Es el sistema que mas me ha gustado de todos los que he visto. Gracias

@harry1066tube 2 жыл бұрын

This is the best video guide I've viewed to anything Diy - No need for pointless chatter! Excellent design, just what I need to build, thanks for sharing. Subscribed

@CraftyDude 2 жыл бұрын

Thank you🤜🤛

@rodfav2656 2 жыл бұрын

First time I've actually seen someone give links to all parts needed! Awesome! Thank you so much. Love your work and will make one myself as soon as the parts arrive. I've subscribed too.

@CraftyDude 2 жыл бұрын

Thank you very much👍 I get many questions as ''Hey Dude where you get that parts" , so I decided just left links in description section🙂

@bradleytuckwell4854 2 жыл бұрын

Such a tidy and beautiful made lift one of the best I’ve seen. Thanks for the free plans I’ll be making that for my table that I’ve just made

@CraftyDude 2 жыл бұрын

Thank you🙂 I will make new router table too, its first step to it, this lifter projected with tilting opportunity in the future👍 drive.google.com/drive/folders/1WKn4kZkhZFZll0VG0g1-43U9dQg9BTbD?usp=sharing

@toddharshbarger8616 2 жыл бұрын

I think this is the best DIY router lift mechanism i have seen! I also love all of your DIY tools

@CraftyDude 2 жыл бұрын

Thank you👍 you can check my router table video, there this lifter installed and how it works😉

@germanrepublic 2 жыл бұрын

I always watch your videos in amazement and am thrilled to see what you come up with. I am quasi "workshop novice", just starting to learn about wood and thanks to you and your excellent videos and tutorials I will probably be able to build myself piece by piece really good tools. Thanks for the provision of various construction plans - you are virtually "my hero"! ;)

@CraftyDude 2 жыл бұрын

Thank you very much!Glad to hear that my projects helps you improve your woodworking skills🙂👍

@user-zh5wd4rr1k 2 жыл бұрын

Всё станки высшего мастерства, 100 баллов. 👍🤓

@CraftyDude 2 жыл бұрын

Спасибо😉

@myelinmusic9760 2 жыл бұрын

Great job. Thanks for helping us all out!

@Grammostola 2 жыл бұрын

I love builds like these...then I look at the current wood prices and realize that buying a pre-built metal variant is probably cheaper right now.....

@CraftyDude 2 жыл бұрын

I dont think that you can get same as this or I didnt saw it in market..but prices in these days just shocking, wood, metal, scews 💰 🔝

@francisconascimento2034 2 жыл бұрын

Fantastic, Very good Brasil 🇧🇷🇺🇸

@pking39 2 жыл бұрын

Awesome idea. Thanks for sharing

@CraftyDude 2 жыл бұрын

Thank you🙂👍

@jorgedivinoxavierdesouza5435 Жыл бұрын

Muito obrigado pelo projeto parabens !!1

@casroy777 Жыл бұрын

Subbed ,thanks for links

@CraftyDude Жыл бұрын

👍🙂

@marciopenha4139 2 жыл бұрын

Gostei do projeto,simples e funcional.

@CraftyDude 2 жыл бұрын

sim, funciona muito bem👍🙂

@UniCorn-wf1hi 2 жыл бұрын

Thanks for sharing

@CraftyDude 2 жыл бұрын

You're welcome👍🙂

@thanasiskatsambas7534 Жыл бұрын

Good morning, I am following your channel. Your projects are awesome. Well done. I am trying to do this project of the router lifter. I do have a problem with cutting the inner part named 8. The png photos you posted on the Google drive are helpful except the photo 8. I will appreciate it if you can post the skp. File in order to manage to make the plan out of the perspective. Thanks a lot

@KerajinanKayu363 2 жыл бұрын

Sangat kreatif bang

@CraftyDude 2 жыл бұрын

Terima kasih🙂👍

@nivioramosjunior7386 2 жыл бұрын

Your project was wonderful, it is certainly the most beautiful on the Internet. I'm a novice hobbyist, could you give me the complete router table project? If not, no problem. I'm your fan. Post new videos soon. a big hug.

@CraftyDude 2 жыл бұрын

Thank you👍 Are you asking about router table plans?🙂

@nivioramosjunior7386 2 жыл бұрын

@@CraftyDude Yes!

@CraftyDude 2 жыл бұрын

@@nivioramosjunior7386 I didn't finish full plans, but that's what I used then I make this table drive.google.com/drive/folders/1ZeA6mg5yi1z8JwcJ4PB33sWrGyCdjHlf?usp=sharing

@Dando.22 2 жыл бұрын

Respekt 👍👍👍👍👍

@CraftyDude 2 жыл бұрын

👍👍👍🙂

@brettkelly3873 2 жыл бұрын

Love your work - very creative. What did you use for the drive shafts and where did you get them from?

@CraftyDude 2 жыл бұрын

Thank you very much👍 I left a links to parts I used in this project, check video description section😉

@brettkelly3873 2 жыл бұрын

@@CraftyDude Thankyou so much for your speedy reply. i looked at the description - could't see the threaded drive shaft for lifting - only the stainless steel guide rods

@CraftyDude 2 жыл бұрын

Thats 8 mm diameter threaded shaft, not cnc, nothing special, usually you can find it in every materials shop as 1meter lenght or 50cm, I used that shaft just couse it have small thread and allows to lift slower and more accurate, and they is very cheap

@brettkelly3873 2 жыл бұрын

@@CraftyDude thank you for that.

@NWMT Жыл бұрын

Very nice! I am new to stuff like this, but can your files be sent to a third party for either 3D printing or metal laser fabrication? Forgive a rookie question.

@CraftyDude Жыл бұрын

No you need program as fusion360, to make toolpath for cnc machines

@victorincio1836 10 ай бұрын

Amigo, muy bueno su confección de este elevador de Reuter. Agradecería nos ayude con las medidas y nombres de los aditamentos que usa, para pedir con propiedad en el momento de comprar , si es posible en qué lugares se consiguen, muchas Gracias.

@CraftyDude 10 ай бұрын

Verifique la sección de descripción del video👍

@stevesiefken6432 Жыл бұрын

Nice work! By the way, do you have a video of how you made the corner clamps?

@CraftyDude Жыл бұрын

Thank you👍 yes I have it, Diy corner clamps from wood | kzfaq.info/get/bejne/fLSmhdx-u9PQYIU.html

@hug58h Жыл бұрын

Very nice. But where does one get the machined parts? I’ve never see. Such things before.

@CraftyDude Жыл бұрын

Hi, check video description section, I left links to parts was used in this project

@DB-dj6zk 7 ай бұрын

Can you help me understand how to connect KFL08 bearing, the gear and the threaded rod used to raise and lower the router? Does the rod just sit in the bearing with the gear set screws tightened around the rod?

@CraftyDude 7 ай бұрын

Bearings and gears has tightening screws, you just need set in place and tighten them

@DB-dj6zk 7 ай бұрын

@@CraftyDude are you saying the threaded rod is tightened in the bearing and the gear? How does rod turn if both are tight?

@nailabc2303 7 ай бұрын

👍👍👍👋👋👋🙏🙏🙏

@enginkavukcuoglu9625 2 жыл бұрын

👍 👍 👍

@CraftyDude 2 жыл бұрын

🙂👍

@TheMontego69 2 жыл бұрын

May I please request the Original updated Sketchup file? Love this router lift want to build one.

@CraftyDude 2 жыл бұрын

You can find link to all measurements in video description section👍

@wiseoldfool 2 жыл бұрын

Good work. Are you going to add dust collection?

@CraftyDude 2 жыл бұрын

Thank you👍 Its first part of my new router table project, dust collection collector will be in fence as usually🙂

@wiseoldfool 2 жыл бұрын

@@CraftyDude I've found dust collection in the fence alone is not sufficient, so I will be experimenting with methods of dust collection below the table as well. I am looking forward to watching your project progress.

@CraftyDude 2 жыл бұрын

Yes its interesting for me too, makita air cooling system blows air straight from bottom part and vacuum cleaner in fence have to make strong air channel, which dont let dust move down, but i will make extra collector for vacum cleaner if its will be needed🙂

@wiseoldfool 2 жыл бұрын

@@CraftyDude Interesting!

@danjazzbass1983 5 ай бұрын

friend, do you sell this system? I need something like this for my Routers...... the one I have is big and I want to leave it on a table just to do that type of work

@CraftyDude 5 ай бұрын

I have added link to plans in video description section, if you want to make one👍

@mpruijssers1 7 ай бұрын

Do you have build plane? On letter? Technical Drawing

@CraftyDude 7 ай бұрын

Check video description section😎

@DIALFMMHz Жыл бұрын

hola amigo la corona de sierra para hacer el agujeró de que medida es gracias

@CraftyDude Жыл бұрын

Diámetro del enrutador Makita 65 mm, por lo que necesita un poco más grande

@DB-dj6zk 7 ай бұрын

I also wanted to ask with your design is it possible to lift the router from the top as well as the side?

@CraftyDude 7 ай бұрын

With some changes it’s possible. I used this router lift in my router table project, you can check it in my channel

@DB-dj6zk 7 ай бұрын

What keeps the router from dropping? Are the gears locked after raising the router?

@CraftyDude 7 ай бұрын

Threaded rod, as it stays in place and won’t spinning I didn’t make extra lock

@DB-dj6zk 7 ай бұрын

That is ingenious! I have never worked with something like this before. I think your design is really good. It’s very simple and very easy from others that I have seen. Thank you very much.