Plunge Base Router to Router Lift with the Router Raizer

Рет қаралды 332,229

4 жыл бұрын

Save money and instead of buying a dedicated router lift, turn your plunge base router into a router lift with this 'Router Raizer' add on.
This add on works for numerous plunge base routers. NOTE: if you have a different model of plunge base router DO NOT FOLLOW THIS GUIDE EXACTLY, look at the instructions as the procedure may differ between different plunge base routers.
Check the manufactures site for a list of compatible routers:
www.routertechnologies.com
------------------------------------------
Below is a list of tools/supplies from the video and a couple additional tools that I really like, as well as video/audio gear I use to make these videos. Some of these links are generated by Amazon and provide me with a small percentage/kickback should you use them to purchase any of the items I use. Thanks for supporting me and this channel!
🛠️ TOOLS/SUPPLIES:
Router Raizer: amzn.to/3jfaQ31
Router Raizer (Rockler): www.rockler.com/router-raizer
Xtreme Xtension: amzn.to/30BGDmr
T-handle ball end allen wrench (5/32"): amzn.to/3hcZzyl
Incra T-Rule 6" ruler: amzn.to/2MS8n38
🎥 FILMMAKING GEAR (affiliate):
Lumix GH5 Camera with 12-60mm lens: amzn.to/2ACvlVE
128GB SD Card UHS-I: amzn.to/3dBJfG7
Rode Wireless GO: amzn.to/2MBvTxr
Rode VideoMicPro: amzn.to/2MztvY0
3.5mm TRS stereo breakout cable: amzn.to/30biPHa
Cold Shoe Extension Bar: amzn.to/3dBhixZ
Blue Spark Desk Microphone: amzn.to/376o2lg
Desktop microphone stand: amzn.to/30mpjmX
🎼 The music I use in all my videos comes from Epidemic Sounds: www.epidemicsound.com/referra...
------------------------------------------
Are you a Patreon member? / 42pursuit
---Follow 42 Pursuit!---
INSTAGRM: / 42.pursuit
TWITTER: / 42pursuit
FACEBOOK: / 42pursuit
WEBSITE: www.42pursuit.com
Thanks for watching!

Пікірлер: 258

@jed2055 3 ай бұрын

For those who don't want to install a purpose made router lift there is an easier way, you still get the precision lift and its so easy too. All I did was install an old scissor lift car jack on the shelf under the router. To raise or lower just turn the crank shaft receptacle by hand. The load is so light compared with a heavy vehicle that you can turn it easily without the crank shaft. Bolt or screw the jack in position and turn the jack slightly offset so it isn't sticking out to your belly button. This method guarantees the router won't move down either so its rock solid in any position. My router always moves back down when I back off on the jack because it is spring loaded plunging model.

@dfinma 26 күн бұрын

This sounds like a GREAT idea. Any pictures or video?

@micheldesjardins7199 3 жыл бұрын

I have done this modification to a big Porter Cable 2.5 hp plunge router 2 years ago and I am completely satisfied with the result. Works great with the Kreg base I using.

@siph2o 4 жыл бұрын

I've been looking for something like this forever and just learned about this product a few days ago. This saves me from replacing my router table and router to accommodate a router lift. I already ordered mine with a collet extension that should will arrive in a few days, and I'm glad to have found this video to walk me through the set up. Thank you!

@42Pursuit 3 жыл бұрын

Glad you found this video helpful!

@gregconnell6320 6 ай бұрын

I know this is 3 years old, but I just followed your video while I installed the RZ100, It was a breeze, I watched you do section, then I followed, done in no time. Thanks for posting!

@42Pursuit 6 ай бұрын

Awesome! I'm glad it helped!

@patrickguyot1290 9 ай бұрын

I have one of these DW625E,its been in a box for years,its too heavy to use comfortably. Tbh,i have bought a Makita DTR50 and routing has become something i look forward too I love your video and if i ever need to use a big router this is the way to go Thank you for sharing 😊

@Strony04 2 жыл бұрын

Thank man, I was just looking to buy a lift and a new router, because this model cant work with a table. This changes everything. Thank you so much. Saved me a lot of cash.

@42Pursuit 2 жыл бұрын

That's awesome! I'm glad this video was helpful for ya! :)

@fuddly123 4 ай бұрын

Ordered mine from rockler and the the Extreme extender and t-handle wrench from amazon ! the raiser is coming tomorrow , can't wait to install it .Your video was extremely helpful and you made it look very easy .Thank you so much -will post my results after tomorrow's install on my Ryobi 3 1/2 hp plunge router - Fred

@ErikMcGowan 3 жыл бұрын

This was the perfect video to let me know I could make serious use of this product... Really well done!

@42Pursuit 3 жыл бұрын

Awesome! Thanks! Glad you got some value out of it.

@Landruman2002 3 жыл бұрын

This is a wonderful video. I have the same problem with my router, and after seeing your solution, I may buy those or similar products. But what’s even better is the quality of your video. Kudos to you. Your narration isn’t too lengthy or over bearing like some you tubers; your presentation was excellent and well spoken. In addition, your editing was spot on, with speed ups at the right times. I’ve seen hundreds of videos on KZfaq, and videos with your quality are rare to come by.

@42Pursuit 3 жыл бұрын

Thanks so much! That's what I'm aiming for as I appreciate videos that are straight and to the point myself. Thanks for watchin!

@msgajhimelret9496 3 жыл бұрын

Thanks for posting such an indepth video on how easy their system is to install. Found one on Amazon for $231.00 but will keep looking and You might think of sending this to their company as a How To for their viewers....

@42Pursuit 3 жыл бұрын

Amazon seems to be in and out of stock lately for a reasonable price. Check Rockler.com if you're in the states. They usually have them for $110. That's a great idea, I'll hit them up! 👍

@Sly_Wolf_1 3 жыл бұрын

OMG! You are fantastic! I have a ELU MOF177E, served me well for decades! But you just solved my decades old problem, Thank you!

@42Pursuit 3 жыл бұрын

Right on! This add-on is a game changer, I've been using it regularly since publishing the video and it's been working like a dream. Thanks for watching and commenting!

@Sly_Wolf_1 3 жыл бұрын

@@42Pursuit Glad to hear that, but you honestly will never appreciate just how much you helped me by posting this video. It's been such a great router and still is, they just don't make them like that anymore, and now i won't moan about using it in my table. Thanks again.

@SuperEwokk Жыл бұрын

Great demonstration video, thanks. It's hard to find clear non-show off, clearly shown and explained videos. I have the same model Elu router that I intend to put in my (yet to be made) router table, so that was an added bonus. Just need to get the lifting gear now and I am looking forward to not having to fiddle around under the table. Can't wait.

@42Pursuit Жыл бұрын

Glad you found the video helpful!

@mikery2316 3 жыл бұрын

Very well done. A concise but thorough explanation and demonstration of what looks to be a very useful product. Thank you.

@42Pursuit 3 жыл бұрын

Thanks for your kind comment! I'm glad you found the video helpful.

@quakerweb 6 ай бұрын

Thank you for the good video. I installed one on a Porter Cable 7539 & Rebel router table. Was fun to do and it works well. HOWEVER, WATCH OUT for the little dust button (Dust cover #31)! Don't leave it on the router table out of its socket. It's about the size of a button battery and can drop easily into the router motor. It happened to me without me knowing it... I noticed it missing and, before turning on the router, scoured the area around the router hoping it would be somewhere other than where I dreaded it might be. Finally took the router apart and fished it out. Now, when I make a height adjustment, it goes into its own receptacle - no matter what...

@davidlyons7238 3 жыл бұрын

Well done. That price is nice too. Love seeing something assembled. I have a miserable time with printed instructions. Thanks I'll look into this.

@42Pursuit 3 жыл бұрын

Totally! I wish every company would do video instructions as well as printed. Thanks for watchin!

@madmikemakes3056 3 жыл бұрын

Great video. My Triton router just ran a bearing so I'm going to adapt my AEG router with a top lift.

@matshallsten19 2 жыл бұрын

Hi. Watch this video only now. You have to work as a teacher. For this was the clearest instructional video I have seen. Excuse the spelling. Many greetings from Sweden.

@42Pursuit 2 жыл бұрын

Wow, thank you so much for your kind words! Your comment is super encouraging!

@Junior-rz3ox 2 жыл бұрын

Thank you for this video. I have an older Ryobi and it is listed as one of the routers it fits. Perfectly done and very well explained.

@42Pursuit 2 жыл бұрын

Awesome! Glad it was helpful for you!

@brucesannino6181 3 жыл бұрын

I bought the RouterRazor and the Xtender four years ago and installed it with my Freud 2000. I LOVE IT! The balance between the quality, function and price absolutely makes the two tools excellent value. My two gripes are more like adjustments for my use. First the hex socket for the elevating rod faces up on the table. Included is a little rubber plug. If you don't put the plug back in after each adjustment the socket quickly fills with sawdust. Then you can't insert the elevator crank handle in the socket for the next adjustment. The little plug is hard to keep track of. I have shop air at my router table so I automatically give it a puff before I make the next adjustment. Second, when installing or changing a bitt the hex key used to tighten\loosen the bitt in the Xtender is very akward to insert in it's recess, then you can only turn it less than half a turn before your hex key hits the table top. I bought a tee handle ball tip extended hex wrench. Poof, it goes right in, it's off the table and I can turn it easily with ample force. I'm delighted with both these tools and support from Bob the developer was just excellent. I HIGHLY RECOMMEND BOTH THE RAZOR AND THE XTENDER.

@42Pursuit 3 жыл бұрын

It really is a great upgrade but not without a few drawbacks. I've got some improvements on it I'll be making a video about in the near future. Keep an eye out for that if you're interested :) And thanks for watchin'!

@georgehayashibara1798 3 жыл бұрын

Very nicely done video in clearly walking us through the assembly steps and your ideas for improved assembly. I had earlier read through the instructions with the many parts needed for each step and I was concerned about making a mistake during the assembly process. I stepped through your video on my iPad as I went through the assembly process and it made it so much easier. My kit didn't come with item #46, the locating pin so I ended up using the template instead.

@42Pursuit 3 жыл бұрын

I'm so glad you found the video helpful!

@petermarsh4993 Жыл бұрын

Dear Sir, I’ve been looking for exactly this for years. I didn’t want to spend $1,000~$1,250 on a round body router + router lift and your option seems great. The combination of Router Razer, Chuck extension and collet handles comes in way under that at ~$150.00 AUS. Thanks a million.

@42Pursuit Жыл бұрын

Awesome! Glad to hear you found the video useful 👍🏼

@julesmarcu5635 Жыл бұрын

Great video, liked the way you laid everything out and gave a straight to the point explanation 👍

@42Pursuit Жыл бұрын

Thanks! Glad you found it helpful!

@JoeSatellite 3 жыл бұрын

Awesome. I have a Dewalt 625E so will be looking to purchase a kit and extension. Very detailed instructions too. Thank you for this

@Dr.H_Woodworks Жыл бұрын

I have the same router too. But I am not sure if it will fit to the 625e model. Were you able to install it?

@B15SDMDESIGNS 2 жыл бұрын

That right there in my eyes is the Rolls Royce of routers. Loved using mine, gave me many many years of service before it died.

@42Pursuit Жыл бұрын

I agree! Such a solid router. Didn't know how good it was when I bought it used but so extra glad to have it now.

@happyrecluse2849 5 ай бұрын

Great vid. Am looking to adapt this concept to my Ryobi Re180PL Not seeing a listing for my router so I'll try and reach out to this company to get there input. Like the T-rule, gonna chk that out as well. Thanks for the tips

@wavemancali 2 жыл бұрын

I am going to be so happy if this kit fits my router. I am going to go to my shop in the morning to check model numbers for compatibility.

@42Pursuit 2 жыл бұрын

Did it end up fitting your router? Hope so! Also, check out my latest video if an electronic router lift is of any interest to you. Thanks for watchin!

@johndn9238 3 жыл бұрын

Excellent informative video; have the same questions as you had so now going to look into the Router Raizer option. Many thanks indeed.

@42Pursuit 3 жыл бұрын

Awesome! Glad you found the video useful!

@tgrimes54 3 жыл бұрын

That is so cool. Glad this came up in my feed.

@42Pursuit 3 жыл бұрын

Awesome! Glad you liked it!

@Smedleydog1 3 жыл бұрын

I have one of these that I installed on my old Hitachi M12v years ago. It works very well. Threre are more expensive ones out there, but they don't do much more than raise the router and don't work with as many routers as the Router Raizer does.

@42Pursuit 3 жыл бұрын

Absolutely! I wasn't sure what quality and operation to expected before ordering it, but I'm quite happy with it.

@negotiableaffections 3 жыл бұрын

Hard to imagine that routers could ever be that simple to use! lol. Cheers!

@42Pursuit 3 жыл бұрын

No kidding! I wish that piece came standard with all plunge routers. So handy!

@dougnelson2398 3 жыл бұрын

I've had one of these for years. Works great!

@42Pursuit 3 жыл бұрын

It's such a great upgrade!

@davidvanderpool1534 5 ай бұрын

I really liked the excellent step by step you did. You really should have been paid to do your review.

@thomasalison6188 3 жыл бұрын

Thanks for the review, I have a Dewalt 625, I might have to get both accessories for it!

@42Pursuit 3 жыл бұрын

Do it! I've been super glad I did the upgrades. Thanks for watching!

@sierkdejongh8984 7 ай бұрын

It looks good, excellent documentation and video. Two tips: 1) After setting the depth, use the original lock to avoid the depth changing through vibration. Ask how I know..... 2) Enlarge the hole in the acrylic plate to be able to use bigger cutters, same size as the hole in the original baseplate

@josuecaleb5053 2 ай бұрын

How did you find out you needed to use the lock?

@johnmutton799 3 жыл бұрын

You have given the Elu a brilliant a new lease of life. That and the Dewalt, and trend model also the Fein model are the best plunge routers. There is hardly any play on the pillars if any. The best is the festool of2200, for play and locking of. Plus there is more than one bearing taking the strain of the cut. The dust extraction is the best. But with the Elu model use the dust collector under the table as well as above. That really catches the dust. Get a splitter for the dust hose. Don't worry about the opening in the dust cover being 50mm. That is the biggest sizefor this router. Do not go bigger. The bearing cannot take it.

@42Pursuit 3 жыл бұрын

Totally! They're incredible routers! That's why I wanted to keep it instead of swapping it out with a different router and more typical lift. So glad I did this upgrade.

@sheilaw977 7 ай бұрын

Thank you so much for posted this video. What a life (time) saver. I have a rebel router table and this is the only lift that will work. ❤️

@42Pursuit 7 ай бұрын

Awesome! Glad it helped!

@Stephen8454 Жыл бұрын

Glad I subbed cus this is on my list of things to do (eventually) 😅

@boallmon324 3 жыл бұрын

Thumbs up I just installed my router raiser today for my plunge router works great after tweaking it

@42Pursuit 3 жыл бұрын

Great to hear! Just out of curiosity, what tweaks were needed?

@MrLeram12 6 ай бұрын

Great step-by-step instruction. Thanks. Enjoyed it.

@42Pursuit 6 ай бұрын

Glad it was helpful!

@budlloyd3127 3 жыл бұрын

this looks absolutely perfect, thank you for the video! subscribing now lol

@42Pursuit 3 жыл бұрын

I'm glad you found it helpful! Thanks for subscribing!

@josephthompson4363 3 жыл бұрын

Excellent video, thank you for taking the time to make it

@42Pursuit 3 жыл бұрын

Awesome! Glad you found it valuable. Thanks for watchin!

@weekendwarrior9570 3 жыл бұрын

Excellent video and process. Thank you so much for sharing...

@42Pursuit 3 жыл бұрын

Glad it was helpful, and thanks for your kind comment! Cheers!

@DMNKLR_official Жыл бұрын

Great video, which caused me to decide that I want to buy this. The only problem, is that I need the RZ200 model, and nobody sells it online any more. They also haven't updated their website in a long time, and Amazon reviews suggest that they've pretty much no staff to handle customer service. Such a wonderful product, it's aggravating to see the idea go to waste like it has.

@johnmacleod2487 Жыл бұрын

Ya, real 'blast from the past' going to their website lol

@faragmostafa633 11 ай бұрын

I'm used to larger, corded routers kzfaq.infoUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.

@joelprinciple7519 3 жыл бұрын

What an Excellent presentation. Thank you

@42Pursuit 3 жыл бұрын

Thanks! Glad it was helpful!

@bryandowdey1779 3 жыл бұрын

Very helpful video. Thanks!

@42Pursuit 3 жыл бұрын

Glad it was helpful!

@jimbo2629 5 ай бұрын

I wondered if you needed this springs both before and after.

@hokaidosax 2 жыл бұрын

Thank you very much for this super helful video. Love the way you do the edit!

@42Pursuit 2 жыл бұрын

You're very welcome! Glad you found it helpful!

@reaper060670 2 жыл бұрын

I didn't know I could buy that part for the unge router so cheaply bro.. Thanks very much for the help and information.. It's very much appreciated BTW.. I only bought me a cheap router the other day. I ain't gonna lie man. THEY'RE MESSY AS FOOK. LMAO.. I love that I can put this router and build it into the table saw I'll be building in a few weeks or my workshop.. Thanks again man.. U do great work. I bet u just dug a helluva lotta people out of a hole with this brilliant video..

@42Pursuit 2 жыл бұрын

Awesome! Glad you found the video helpful! Yeah, routers sure can make a mess 😄 A router in the wing of a table saw is clutch! Best of luck on your build!

@marklittlejohn1457 11 ай бұрын

Thankyou for the tips and video

@42Pursuit 11 ай бұрын

You bet! Glad you found the video helpful!

@keithdavison5578 10 ай бұрын

Brilliant i was wondering how or if I could get a router razer

@danielmierop662 3 жыл бұрын

That was very nice information. Thank you.

@42Pursuit 3 жыл бұрын

Glad it was helpful! Thanks for watching!

@vipero00 2 ай бұрын

To adjust my router I removed the adjusting nut. I then heated up a piece of 3/4" pvc about 10" long and pressed it onto the adjustment nut. Let it cool. Thread the nut on the end of the PVC back onto the router. The PVC hangs low enough to twist by hand and I can make micro adjustments from the bottom of the router table. Total cost $1.28. I added a hole to my router table so that the router can be pulled out of the table and set down to change bits. The PVC fits into the hole of the router table.

@denzilsnaggs8683 Жыл бұрын

Well this helped me out a lot.

@42Pursuit Жыл бұрын

Awesome! Glad you found it helpful!

@davethurston753 11 ай бұрын

This great. Thanks for sharing

@louislucatelli4844 3 жыл бұрын

Excellent tutorial

@42Pursuit 3 жыл бұрын

Thanks! I hope you found it helpful!

@sta39cee Жыл бұрын

great video. thanks for the step by step install help.

@42Pursuit Жыл бұрын

Glad you found it helpful!

@georgequalls5043 7 ай бұрын

Does it lock in the height adjustment?

@GraemePayne1967Marine 3 жыл бұрын

WOW! It's very rare to see a parts diagram with full size drawings - I wish many more manufacturers did that!

@42Pursuit 3 жыл бұрын

Totally! So helpful in the assembly process!

@gman4reel 2 жыл бұрын

Thanks Bro.... This saved the day for me!!!!

@42Pursuit 2 жыл бұрын

Glad you found it helpful! Thanks for watchin!

@johnmutton799 3 жыл бұрын

You can also buy plunge bars from Woodrat to speed the height adjustment.

@andyellem Жыл бұрын

Holy shit my dude, extremely helpful

@42Pursuit Жыл бұрын

Awesome! Glad to hear it!

@davidnleeh4 3 жыл бұрын

Thank you for posting this video!!!!!!!

@42Pursuit 3 жыл бұрын

You bet! Thanks for letting me know you liked it! :)

@davidnleeh4 3 жыл бұрын

@@42Pursuit NP!

@paulrafter6715 3 жыл бұрын

Thanks so much for sharing 👍👍👍👍

@42Pursuit 3 жыл бұрын

My pleasure! Glad you found it useful!

@rryybass 3 жыл бұрын

Brilliant video cheers bud

@42Pursuit 2 жыл бұрын

Glad you enjoyed it. Thanks for watchin!

@MarkSeniow 4 жыл бұрын

great video! excellent work =) Router Raizer not cheap in Canada :(

@siph2o 4 жыл бұрын

Still a lot cheaper than a Jepson router lift, and it will fit almost any plunge router.

@MrNess2911 3 жыл бұрын

Really Helpfull!

@42Pursuit 3 жыл бұрын

Awesome! Glad you found it helpful!

@diegohperez6434 7 ай бұрын

Very good

@rok1475 Жыл бұрын

Get yourself a “ER20 Router Collet Extension Chuck” and a set of ER20 spring collets. Not only you extend the length of the shaft, you can clamp any diameter router or CNC bit you can find on the market. You can also tighten the collet chuck with two wrenches from the top. Clamping router bits with set screws that dig into the shank is a bad idea, but I will let you discover why on your own.

@42Pursuit Жыл бұрын

At the time of posting the video there weren't any ER20 extensions that had consistently high reviews so I didn't want to recommend something that was potentially garbage to the viewers. The Xtreme Xtension is highly rated, well made, extremely well balanced, and the set screw doesn't dig into the shank as there is a machined piece between the end of the set screw and the shank that has the same curvature as the shank and distributes the pressure so it's physically not possible to overtighten enough to damage a router bit shank.

@davidmcgrath6507 Жыл бұрын

Thank you!

@42Pursuit Жыл бұрын

You bet! Glad you found the video useful!

@Z-add 3 жыл бұрын

Jessem also sells a router lift for plunge routers.

@42Pursuit 3 жыл бұрын

Yeah, they're pretty spendy though at $390.

@SimspaceDIY 3 жыл бұрын

Great video! Didn't know those products existed. I like the quick bit change feature, but do you feel comfortable with a set screw holding that router bit in place at such high speeds? Feels like there is some sketch factor there that makes me question the extension safety.

@42Pursuit 3 жыл бұрын

I had that thought too when I first ordered it but after looking at it with that thought in mind I really don't think it'll be an issue. The machining is very precisely and you can feel how close of an interference fit it is when you slide a 1/2" bit in. The locking mechanism doesn't compress like a traditional collet and my guess is that even if the set screw wasn't tightened, everything is so concentric that the bit wouldn't violently wobble out like it would on a loose collet. They also have machined out a small bit of material on the opposite side of the set screw to maintain a perfect balance.

@Dr.H_Woodworks Жыл бұрын

Thank you for the instructions. I have Deealt dw625e router. Do you think kit will work for my router as well.

@42Pursuit Жыл бұрын

Yes, I believe that's the same as the one in the video. Dewalt bought ELU routers shortly after but kept the same design for that model.

@ephraim.1964 3 жыл бұрын

Very nice! 👍🏼 👍🏼

@42Pursuit 3 жыл бұрын

Thank you! Cheers!

@rloes 3 жыл бұрын

Did you do a video of the further upgrade you did to make it a motorized height adjustment?

@42Pursuit 3 жыл бұрын

Still working on it, ran into a code issue. Hopefully have it up and running soon!

@jonienglish3231 2 жыл бұрын

VERY GOOD VIDEO

@42Pursuit 2 жыл бұрын

Thank you very much!

@mdre83 2 жыл бұрын

Hi, do you know if the Router Raizer can be used on the Elu OF97E router? I believe the equivalent of the Elu is the Dewalt DW621 however, the top layout is slightly different. Thank in advance for your / anyone’s help. Martin

@42Pursuit 2 жыл бұрын

I'm not sure but I'd hit up the guys over at www.routertechnologies.com and I bet they'd be able to tell you. Best of luck!

@glennhorning2057 2 жыл бұрын

Question: what is the Rapid Collar (#22) used for. Why would I need to tighten or loosen it? Great video. I have the same Elu. Thanks so much.

@42Pursuit 2 жыл бұрын

Hmm, now that I think about it, I'm not honestly sure. I haven't had a need to adjust it since I put it together. I suppose it could be used as a height stop, but aside from making it slightly easier to assemble the thumbscrew by holding the shaft compressed, it's been pretty much set-and-forget.

@johnmutton799 3 жыл бұрын

They make a height adjuster for dewalt which you can extend. You should have bought the Trend T9 with built in height adjustment. Same router as Dewalt!

@42Pursuit 3 жыл бұрын

Interesting, I'll have to check it out!

@georgecharrington9186 2 жыл бұрын

Cant find anywhere in the UK that stocks this. Unavailable on Amazon. Any suggestions?

@42Pursuit 2 жыл бұрын

I believe rockler.com ships internationally. There's a link to the router raizer listing on their website in the video description. Or go to the router raizer website at www.routertechnologies.com and see if they have local distributors.

@simplyphil.photography164 11 ай бұрын

Now l know how they put a extension bit and rising fine adustment.

@johncorey2347 Жыл бұрын

Very informative! I've only recently started doing routing on a table, previously used it on A Triton Work Centre. One question: does it come with instructions for a Makita 3600BR router please? I agree, areal pain changing without a lifter. Cheers! John

@42Pursuit Жыл бұрын

Hmm, not sure. Take a look through the list of compatible routers on www.routertechnologies.com and if you don't find the one you're looking for, maybe shoot them an email.

@harley1969chuco Жыл бұрын

Thanks for sharing this information ,, only question ,,, does the kit fit any router ? one size fits all ?

@42Pursuit Жыл бұрын

It fits most plunge-base routers. Check their website for the list of compatible routers 👍

@leongeisberg294 Ай бұрын

Do you know if they make this kit for Porter Cable?

@42Pursuit Ай бұрын

You'd have to check their website which has a list of compatible routers

@nudger44 3 жыл бұрын

Hi is this compatible with a UK dewalt 618 router as we are metric and you are imperial

@42Pursuit 3 жыл бұрын

I would guess yes, but I'd contact the folks over at www.routertechnologies.com just to be sure. Thanks for watchin!

@georgelza 3 жыл бұрын

Would be very keen to know if this system is compatible with Bosch GOF 900A Any chance you can point me to the agents?

@42Pursuit 3 жыл бұрын

Hmm, I'm not sure and didn't find mention of it on their site. I'd try contacting them directly and see what they say. www.routertechnologies.com

@georgelza 3 жыл бұрын

@@42Pursuit not to worry, I tried their site, their contact us form does not work, ended up picking up a Triton. :)

@billgiles3261 3 жыл бұрын

I installed one easily with a Hitachi router. The drilling of the table is a bit nerve wracking, measure three times, drill once. My only issue in not putting the magnetic plug back in the table top. The little hole for the handle filled with wood dust! So remember.

@42Pursuit 3 жыл бұрын

True that. I'm glad they supply a few extra covers since I accidentally vacuumed up the first one. Whoops!

@graham6411 Жыл бұрын

I have both 0.5 and 0.25 bits. How is that accommodated?

@42Pursuit Жыл бұрын

Those two sizes of collets for the router are pretty standard. And if you decide to go the extension route, there's an insert that allows 0.25" bits to be used as well as 0.5" ones.

@DADDYNOOB 2 жыл бұрын

On the threaded adjuster bar it has a quick release so you don’t have to turn the nut Simply push the button in and it just slides up to the top then just release and it’s locked in place

@42Pursuit 2 жыл бұрын

In theory, yes, but in practice that quick release never has worked well on mine. Others may have better luck with theirs. Having height adjustment from the top really is a game-changer though. Would recommend 👍

@DADDYNOOB 2 жыл бұрын

@@42Pursuit just got the trend router table And set it all up And am using the dewalt router Tried the quick release but see what you mean Quite heavy to try and lift to the correct height But this seems quite long winded Saw another one where he had a small jack underneath from Amazon with a little ratchet to adjust it up and down

@carterscustomrods 3 жыл бұрын

Remember that a ⅜-16 steel rod gives you 1/16"with each full turn (and 1/32 each half, 1/64 each quarter turn.) So making a fine adjustment router under your table is easy with some simple tinkering. Personally, I didnt like the weakness of the router raizer's main turn rod. My router is HEAVY so I needed to go beefier. I'm happy with the video though... that's how you show a product and assembly right there!!! :)

@42Pursuit 3 жыл бұрын

Totally! I had the same thought since making that video and plan to make a diy one in the future. Thanks for watchin!

@carterscustomrods 3 жыл бұрын

@@42Pursuit I've made a bunch... still not happy. You know what you should build/buy? The Pantorouter. It was a concept by Mathias Wendel. I have a handmade one, and it is amazing. You can buy fancy versions now from extruded and machined aluminum, but they cost a bit ... a large bit lol. These are so fun to work with! (And you can tweak the handmade wooden version a bit as well by mixing co concepts from the handmade, and machine versions. A hybrid Pantorouter. I just love making tools. I get carried away, my apologies lol.

@42Pursuit 3 жыл бұрын

@@carterscustomrods Man, I've been thinking about it, those pantorouters are sweet! I want to build one but those extruded aluminum ones look so good too. We'll see. Maybe a winter project.

@carterscustomrods 3 жыл бұрын

@@42Pursuit well I look forward to watching the videos for it. :)

@davidlomas8898 3 жыл бұрын

I've had 2 Router Raizers on 2 DeWalt 625s for ten or so years and have never had a hint of a problem with either.

@diegohperez6434 2 ай бұрын

Well this is second time I see this you know how much you saved I look the router lift today one is a 1000 English pounds which is nice but the price is not that nice and look how much you spend may be under 200 dollars and works I have dewalt 625 which is powerful router for hard wood thanks my brain they going to different level know because of my friend thanks again I say hello from London but my work shop hopefully is going to be in Colombia 🇨🇴 👌👌👍

@cathal9987 3 жыл бұрын

The road a bit holder is not a good idea it doesn’t have a double lock system. If you notice when you’re opening up your router shaft you think it’s open and then you have to open it the more it’s because it’s a double lock system

@mikec3546 4 жыл бұрын

nice vid - also considering getting the router raizer. Tell me - with the Raizer installed - can you still used the plunge action when handheld? or do you need to screw the bits down with the handle?

@42Pursuit 4 жыл бұрын

Yes, you can still use the plunge action, all you need to do is loosen the rapid collar thumb screw. Also, to get the full plunge distance, the leadscrew needs to be threaded most of the way into the drive nut.

@Environmenthrall 3 жыл бұрын

Can we get a link for that ruler you used to measure the height of the bit at the end? That sure is nice.

@42Pursuit 3 жыл бұрын

You bet! amzn.to/2MS8n38 I quite like it.

@Environmenthrall 3 жыл бұрын

@@42Pursuit thanks!

@joedance14 Жыл бұрын

I’ve seen examples of DIY solutions very similar to this. However, they ALL seem to modify the router. In some cases functionality was compromised. Q: can the router, after Router Raider installation, be removed from the table and used in handheld mode? And does it retain full functionality?

@42Pursuit Жыл бұрын

Full functionality is maintained and it can definitely still be used as a hand-held plunge-base router. You can see starting around 8:12 that it still acts like a regular plunge base router, just with the ability to turn a knob to precisely adjust the router down towards the faceplate.

@ryangratland2330 3 жыл бұрын

awesome!

@42Pursuit 3 жыл бұрын

Thank you! Cheers!

@traceyluck8722 6 ай бұрын

Will this work with the dewalt E625?

@42Pursuit 6 ай бұрын

Hmm, it doesn't say on their website. You'd probably need to reach out to www.routertechnologies.com/ and ask if that newer model of the 625 is compatible. Let me know what they say!

@poncho6784 3 жыл бұрын

Following the Amazon link it appears that Rockler bought the company or at least the product. It's no longer available on AMZ so you have to get it from Rockler, for a bit more money than what the original manufacturer sold it for.

@42Pursuit 3 жыл бұрын

Thanks for the heads up! I think they may just be temporarily out of stock on Amazon but I added the Rockler link to the description as well. Thanks for watchin!

@laszlodrpaszternak6051 3 жыл бұрын

Hi, Thanks, really nice video. I have three question. Can I use this kit for my DW 626? Is this kit applicable without extension? Has the extension set approval from manufacturer?

@42Pursuit 3 жыл бұрын

Thanks! I'm pretty sure you can use it for that router, I believe it's mechanically very close to the DW625 which is a compatible router. Double check on their site though and shoot them a message if you can't find it there: www.routertechnologies.com. I think the lift kit is fine without the extension, but the bit changes would have to be done from the underside of the table which is slightly less convenient. The extension is listed on the same site as the router raizer, so I assume they're from the same parent company and are made to work in tandem.