Look forward to them making the move to Tennessee.

👍 I purchased two S&W revolvers in 2021 and the function, fit and finish are fantastic. I just wish they would eliminate the internal lock or at least make it a optional feature.

Get rid of the internal locks. I really do not understand why S&W will not listen to customers.

Great information, but I can listen to two guys talking about revolvers at my neighborhood bar. I was expecting a factory tour video.

I've been carrying a 640 everyday for almost 30 years and I still love it. The Airweight back then was not rated for +P and it came with wood grips that are still on the gun. It's a great close range, point and shoot revolver that is extremely easy to conceal.

Nothing more beautiful than a Smith and Wesson revolver.

I would buy one if they did away with the key lock hole on the side of the gun. that model 19 looks great.

There’s plenty of S&W revolvers out there. It’s called the used market. I’ve bought 3 in the last couple month. Only place I’ll buy a S&W revolver because of the lock. Colt, Ruger and others can manage w/o a lock.

My 686 357 has been my favorite since I purchased it in late 80's. You can't beat a 6" 686 in 357

I wish they'd bring back the old school 5906, 5946, 6906, and 6946 semi-automatic handguns. Those were so well crafted and unfortunately, Smith and Wesson stopped making them.

I bought both a model 586 and a model 19 carry comp in 2020. The 586 is great. Smooth action and accurate. The Carry Comp is another story. It has been back to S&W twice. Remember, the Carry Comp was supposedly made in the Performance Center and should have been the better made gun. Their was a problem with the tritium in the front sight, and the action seemed very stiff after 500 rounds. The 586 was the better gun. It went back to Smith and after 2 months they sent it back saying they found nothing wrong and no action was taken. Oddly enough the front sight now had a tritium vial in it and was loose. It wobble. I sent it back again, waited another 2 months, and it came back with a list of parts that were replaced. The action is still stiff and the 586 is a lot smoother. It is not going back again! I will just have to live with it and hope that eventually the parts will ‘break in’. So much for the Performance Center.

...I was lucky to take the complete factory tour in 17 October 1996 - from the foundry to the custom shop...seriously impressive

HEY, Smith and Wesson!! Maybe you should go back to pinning your barrels so they quit rotating after firing a few shots, causing the rounds to start missing the target. Sound good?!

Welcome to Tennessee!

Maybe they got the barrels centered this time

Oh,and make sure you check the fit on the crane to frame which used to be tight and now are sent out the door with 2 mm gaps on the Centennial J-frames.

"Smith & Wesson will keep some of its manufacturing operations in Springfield, Massachusetts, including all forging, machining, metal finishing, and assembly of revolvers, and will continue to have over 1,000 employees in the state." - Smith & Wesson Press Release

I have several, and I love them all!!!

Over all well done. I own but one Smith and Wesson. A chief’s special air weight snub nose in .38 + P . It’s a quality piece.

LOVE these videos! Enjoy them so much, Thanks for the entertainment. S&W is 2nd to none.

Own a lot of Smiths love them. But get rid of the key lock an make them like you used to.

I own a 5 and 6 inch m.27. A 4 inch 586. A 6 inch m.29. The 586 shoots like magic.

In our area, finding a Smith and Wesson revolver (any decent double-action revolver)...is like panning, for diamonds. I can't wait, until we can see, some firearms market stability again!

Please put a white outline on the rear sight on the classic 19. Bring back the 8 shot model 27 with model 29 style barrel in a 5" barrel.

I also own a model 329PD but switched the titanium cylinder out for a stainless steel cylinder from Smiyh and Wesson.

Just wondered why the 649 j frame 357 is no longer in production. I love the shrouded hammer. Got the 438 as well!

S&W needs to drop that lock, I saw one accidentally lock up at the range.

Wish they would make the frame lock an option.

Just spent 1000$ on a m&p340 the fram came with mill marks all along the side the cylinder swings out to. its back at the factory now fingers crossed but honestly my hopes for it being fixed are not high.

When I turned 21 back in 1971 one of the first things that I did was to buy a new Model 28 Highway Patrolman N frame in .357 magnum for $ 95.00. It was the lesser finished version of the Model 27 . Later I managed to purchase a 27 I still have these guns decades later. Back then the fit and finish was superior to what is being turned out today. I will never buy a S&W revolver that has an internal lock, a/k/a a Hillary hole which is totally nonsensical.

I love the wheel guns.

I've had a 629 on back order all year. I was wondering if they were still making revolvers.

Most of the newer j frames have very heavy d/a trigger pulls. I suspect they are using heavier springs maybe for liability or maybe these new primers need 16 lbs. of force to set them off. I wish they could meet the old with the new and everyone would be a winner. Welcome to Tn.

All utility... except for that silly safety lock

Glad they're moving to a free state.

My model 15-3 combat masterpiece has been my nightstand gun for years, stoked with FBI load.

I think I'd prefer a very good condition gun from their heyday over current products.

I just bought a 629 somethings Off. the barrel is pointing about a "1/32 to the left of the frame and slightly off center but everything else is nice I have five S&W revolvers I usually just fix them. this one is not fixable but its still safe to shoot so I don't think they'll do anything about it. I'd still buy another one if I could find one thats a little better 😐

Got 3 very happy S&W

Ask S&W to bring back their Night Guard line. Without the lock.

Wunderschöne Schießeisen

Lost me after Classic - sleeved barrel.

El mejor revólver sin duda,

Was the 19 missing a screw in the grip?

I carried a SW airweight for years because my job required me to be in inner city neighborhoods after dark sometimes. I needed a pistol I could carry in a pocket. A pistol in my car would be useless while walking around. The 38P is plenty. Ask Lee Harvey Oswald.

I bought a 629-6 in 2012 that had a canted barrel and the company wouldn't fix. I sold it and never bought a Smith ever again.

I ordered a new 648 22 magnum last year. Right out of the box the ejector rod was bent. The front of the yolk has a dull mate finish compared to the rest of the frame and is about two and a half thousands of an inch shy of being flush with the frame. I'll never buy another S&W revolver.

Can you do like carvings in your revolver (the metal) so it looks cooler? Anyone knows?

I have plenty of S&W revolvers, but when Taurus and Kimber put out 6 shot snubbies that fit in the same holsters as my J-frames I sold 4 of my J-frames. Taurus, Ruger, and Kimber (for concealed carry revolvers) have really closed the gap in quality and performance. If push came to shove, the only S&W revolver I would keep would be my 3" 686 Plus (a masterpiece). My Rugers and Taurus guns are just better guns -- just not as pretty. It's a shame. S&W needs a major renovation -- most on their production lines date back decades. Look at Taurus's on-line factory tour -- the place looks like a hospital with beautiful and clean hi-tech machines. S&W's plant looks like a dark dungeon -- and they have to fabricate spare parts on their own to keep their production running -- the companies that supplied their machines are all gone or are no longer supporting their obsolete equipment!

I have personally known a 642 to go over 5k rounds (was still going strong). They are great guns. Wouldn't own a bodyguard 38 again though. Oh and edit: know 5k isn't that much but is more than what most anybody would shoot.

Any wire EDM usage, or no ?

Maybe when you move you will lose the ugly lock hole.

Why does S&W still keep the “Hillary Hole”? Who ever locked their revolver with a key? If the lock is a good idea, put it on your semiautomatics. IMHO, revolvers are much safer than semiautomatic pistols.

I want to see a video out of the NEW Tennessee facility.

I own two J Frames and an M&P Bodyguard .38.

I own both a 460V S&W magnum and a 500 S&W magnum with a 6.5 inch ported barrel. Both are about 60 ounces unloaded but the 460V has a 5 inch muzzle brake equipped has a full lug barrel and my 500 S&W has a semi-lug barrel profile.

Goodbye Massachusetts.......... Hello Tennessee. The people in and around Springfield need to change their voting habits. This is a company that is iconic in American history and the moronic politicians in Mass. drove them, their jobs and their tax dollars away.

Where's the part where they twist the barrel to be canted out of line?

I own 2 from the 80s that I love but did they ever resolve the barrel cant on some revolvers?

Love my smiths wheel guns, but will not own anything made with a Hillary hold so as you can guess all mine are classic.

Ruger (revolver) fan myself.

Why was the top-break design phased out? It seems like that would be simpler and more aesthetic.

Get rid of the lock and make sure your barrels are 100% lined up for goodness sake.

Please put THREE FINGER HOGUE GRIPS ON ALL THE REVOLVERS.👍💥👍

and QC is still letting them out the door with improperly clocked barrels...sad.

Smith makes the best revolvers Please move production to the United States

I dont like a two piece bbl. Also the lock is absolutely ridiculous.

No hammer on a model 36 J frame is a dumb idea. I have and carry a 1967 model 36. While I can shoot it well double action I’d miss the ability to shoot it single action. And the new model 19 is a poor rendition of the original model 19 which is my favorite revolver in my safe.

Like,old1950s

If you insist on the stupid lock, at least move it to the hammer so we can yank it out and throw it in the trash to put an aftermarket hammer in. Let the parts makers fill the market demand Smith & Wesson refuses to.

Lightweight 44 Magnum kicking like a mule I own the model 65/1 k frame detective model in 357 Magnum stainless and it's just as beautiful today as it was in 1975 when it was made you can't even tell it's been fired it's just that nice Smith & Wesson did and does make some nice guns but they should have left that lock and key mechanism off and I don't like the way they put a steel sleeve in the barrel now

It'll be nice to have a slightly enlarged J frame that holds six shots of .357 Magnum.

I really wanted one of the model 19's but they ruined it with a two pice barrel. What a shame. And them they want to price these in the upper atmosphere

Well I own SW 357 and 44 mag hard to beat SW

Will revolvers ever be back in stock...any time in the future? Ten years, twenty years...what? There's absolutely nothing out there.

S&W DISCOUNTINUED MODEL 64 4 INCH BARREL,....38 SPL,....

No longer in Massachusetts there anti gun laws have forced them out. Along with all of these jobs. And supporting business around the facility. Millions lost. Only means that all pistols prior to the move have gained value.

Have lost touch with want buyers want

Es una lástima que en México se tenga que recurrir al mercado negro para hacerse de un revólver Smith and weson.

it's a long commercial

Why is there usually not much about the actual manufacturing process on this gun tour shows. Show how it is actually built, i have no interest in listening to some blue shirt talking about imaginary quality, i want to see the manufacturing process from A to Z...

S&W should up their QC. What they’ve been cranking out lately is terrible. The P.C. is a laugh.

This didn't have much on how they're made.. it was just an Ad for their revolver line up. :(

This is all well and good. However, here we are in 2024 and the general rule of thumb is to pass them by due to poor quality control. I am unable to fathom why S&W will continue to let poorly made revolvers leave the factory and at the same time jack up the prices with this "MAP" pricing nonsense! Prices have gone up $200 per revolver. All the while, quality continues to suffer. I own many S&W revolvers. 4 of the last 6 I purchased, the 500, the 686+, the Governor, and 3" 686+ had to be returned. The 3" 686+ was so poorly made I was able to get my money back! Right now, I will no longer buy a S&W revolver until the quality improves and the prices come back down to earth!

Should change the name to "promoting S&W".

I like my old S&W 19 and 66 a lot, but when I added a new revolver recently it was a Colt Python. It would have been a S&W 686 or a 29, but I’m not buying a revolver with that absurd lock on it. Rather support companies who listen to their customers. Colt has a better product.

Bye, bye Springfield and you managed to bring this all on yourself.

Taurus ultralight six shot revolver in stainless is a much better choice than the Smith & Wesson heavy j frame that's just my thought thank you for the video

1:58 Did that guy literally just not give a damn that day and even with cameras just mishandled that expensive revolver going in the box? Smh between hillary holes, grips no longer being manufactured in house and firing some of their best gunsmiths. I get their trying saving money but damn at least dont throw your guns around like nerf guns.

taurus makes much better pistols.. s&w uses very soft low quality steel

move south

Making "Hillary Holes" since 2000"

I only buy older smiths without the hole, stop trying to please democrats! They hate you!

Almost nothing about actually making these firearms. More like a commercial.

Get that hideous interlock piece of crap off the revolvers and I might start buying them again.

I love my Classic Series M27, but please for the love of all things good and holy, get rid of that stupid and useless inter grated gun lock!