Short video on winding your own springs at home on the lathe.
Пікірлер: 3 100
@johnjackson97673 жыл бұрын
"They're available in all shapes and sizes - except the one you need." Truer words have never been spoken.
@wesleymorrison99413 жыл бұрын
why must you hurt me in this way
@GoofyVortex3 жыл бұрын
So fucking facts
@GoofyVortex3 жыл бұрын
Cant find a good spring to fit my homemade shotgun
@ch.dj943 жыл бұрын
Also applied in dating scenario
@stroys70613 жыл бұрын
Truer words were never said!
@JamesTM3 жыл бұрын
I'm four years late to this video, but I still gotta comment: the How It's Made parody is absolutely spot on!
@sebastianojeda52833 жыл бұрын
tbh
@fungusenthusiast82493 жыл бұрын
same, I used to watch the show all the time
@codh3gro3 жыл бұрын
Youre right
@kylermellor8203 жыл бұрын
That intro was really nostalgic for me!
@bobratdude23 жыл бұрын
They should have hired him as the narrator
@stufo973 Жыл бұрын
As a retired springmaker if coiling on a lathe after turning the amount of required coils you should wind the lathe slowly backwards to release the spring tension. So that when you cut the wire it won't spin backwards and damage you hand.
@unpkld4 жыл бұрын
"Springs were made to fill the gaps between winters and summers" At that moment I knew I was watching a good video. "General-ly speaking" I had to like the video.
@millomweb3 жыл бұрын
As they say, in the US, a good spring always comes before a good fall.
@cartervaradi29796 жыл бұрын
I downright love the "How It's Made" parody feel of this. The only thing that could make this better is if you say "robut"
@kanelupis4 жыл бұрын
100% this. totally intentional
@calebs48874 жыл бұрын
i really like how its made
@AndyvanderRaadt14 жыл бұрын
Came to the comments to say exactly this.
@benzzoy4 жыл бұрын
Complete with cringey puns.
@brianciszewski64174 жыл бұрын
When I was 4 or 5 and after that I rarely watched cartoons and watched How It's Made besides SpongeBob
@michaell45276 жыл бұрын
"They come in all shapes and sizes, except the one you need"
@reasonablespeculation38935 жыл бұрын
"originally designed to fill the gap between winters and summers"
@abhishekgourav61445 жыл бұрын
Words of a wise man
@RalphSampson...5 жыл бұрын
@@reasonablespeculation3893 His delivery is such a matter of fact that I almost missed it. The guy is awesome.
@rpm20045 жыл бұрын
@@V0YAG3R WOW you must be a big strong man to be able to talk like that to another person on the INTERNET! It's okay we'll shut up now. HAHAHAHA! But seriously,( if you're not just a troll) when someone does that in the comments they're really saying "I found this part funny, what about you guys?" and the like button is used as a quick way to agree/disagree, and the reply function allows others to comment on that part or share what parts they liked. It's just like when you're with your friends (If you have any)and one of them repeats a line from a show/movie you're watching/have watched (Do you scream at them?) It's a normal, socially friendly thing to do, So if anything your comment says more about you than the original commenter (Mike 888) (I NEVER READ MY COMMENT REPLIES SO IF YOU ARE A TROLL, GOOD LUCK TRYING TO UPSET ME)
@topkiller09805 жыл бұрын
Need a spring for my illegal dirty gun damn
@Soudavanahhh4 жыл бұрын
It’s 2 AM. I’m in my kitchen eating meatballs when I see KZfaq recommends me a video on how to make springs. I watch the video. I learn something new. I’m satisfied. What a time to be alive. Thank you for this.
@kojokiller9982 жыл бұрын
I just wanted to say that this is the video that started it all for me. This video is what first got me interested in machining. Thank you Tony for your helpful, interesting, and entertaining videos over the years. So, from a young guy with zero knowledge and zero experience that has been repeatedly lost in the seemingly ever-deepening rabbit hole that is hobbyist machining, thank you for pointing me down the right road :)
@lennyc6246 жыл бұрын
This is great. I didn't want to spend fifty cents on a store bought spring. All I need to do is buy a lathe.
@MaximilianonMars5 жыл бұрын
And music wire
@jimmyhaley7275 жыл бұрын
right,,,, using a $20,000 lathe to make a $2.00 spring,,,, hehehehhe
@springmachinefactory69415 жыл бұрын
Which diameter of springs do you make?
@georgedennison33385 жыл бұрын
@Lenny C "need a lathe" Vise, (or 2 pieces of wood & 2 clamps) & a drill.... LOL
@frostthefoxxo71925 жыл бұрын
Think for yourself big guy. Use a drill press, vise, and a jig.
@Lordmarlowe7 жыл бұрын
As a fan of How It's Made, this had me dying.
@noahsabin73866 жыл бұрын
Nat Carr same.
@TechnoTed6 жыл бұрын
I didn't catch that at first - very funny now that I watch it a second time.
@nidhijangid60016 жыл бұрын
Hi plz watch my video
@nidhijangid60016 жыл бұрын
I allreddy watch yours all videos
@HolahkuTaigiTWFormosanDiplomat6 жыл бұрын
wow
@noahhastings61454 жыл бұрын
"Let's not lose focus" *FOCUS YOU FOCK!! in Canadian*
@shahinportohfeh14464 жыл бұрын
Noah Hastings or you should hear this sentence in German accent 😅👌🏻😂😂😂
@Guffy19902 жыл бұрын
Just popping back to this video to say; this tutorial really allowed me to keep a real spring in my step! Truly, a twisted masterpiece.
@i91145 жыл бұрын
“This offers the discerning spring maker the kind of precision they may not even need”. Pure understated gold!🤣
@DannySullivanMusic2 жыл бұрын
rofl best comment ever
@Wintergatan8 жыл бұрын
i am building a second marble machine and will use springs instead of rubber bands that dries out this time... this video helped me a lot! thanks!!
@muh1h18 жыл бұрын
Awesome, loved your first one!
@JamesBailey1238 жыл бұрын
Yeah dude, you rock, everyone I've ever shown your video to has been hypnotised by it!
@pinkponyofprey19658 жыл бұрын
Yeah, the sequel! The first one was a jaw dropper! :D
@ThisOldTony8 жыл бұрын
Thanks Winter, glad it helped!
@Nick_Rowlett6 жыл бұрын
Martin-This is the crossover I need haha
@blackout761511 ай бұрын
This was the 1st to video I ever saw. A few days ago I needed a spring for a project and the knowledge I gained all those years ago helped creat a functional spring. Thanks Tony for putting out content that is relevant to so many people!
@ahole54072 жыл бұрын
Helpful tip from a spring maker, (Lee Springs) When grinding the spring make sure you have at least 75% of the circumference ground on each end coil. This will reduce the deflection, and ensure proper loading. Heat treatment is done prior to preset and shot peen. Have a good day. 😊 PS: hey Tony, when is Boss going to let you put a manual Torin in the garage..I'm sure you would have a great time figuring out the cams. 😂
@joeburns91 Жыл бұрын
Hey long post after, but where do I find the spools of stock material to keep on the shelf for this? I've got the lathe already so I'd like to have it around for when I inevitably need it.
@ahole5407 Жыл бұрын
@@joeburns91 it's called music wire, it need to be heat treated after coiling like all springs. It can be found many places. I would add that the time labor and materials needed even just for a couple spring will be high compared to just buying one from the catalog. A spring makers catalog has thousands of springs available. Just call and tell them what you are looking for. Compression extension torsion ect.
@adog3129 Жыл бұрын
how do i heat treat it?
@juliolopez343711 ай бұрын
@@adog3129 1/2 HR at 500º F for music wire
@hampuslundin44328 жыл бұрын
Love this guy, anyone else felt the "How it's made" feeling to this particular video?
@ericwehrs3388 жыл бұрын
I think that's what he was shooting for ;)
@Volcker19298 жыл бұрын
Tony nailed the How It's Made motif!
@Marvin.Runyon8 жыл бұрын
How it's Made + Look Around You. What are birds? Why won't you tell us Tony?
@Inferryu8 жыл бұрын
Even the puns where great
@MrSaemichlaus8 жыл бұрын
Lacks some "they" and incorrect terms :)
@TC-bz9dz6 жыл бұрын
too funny...."designed to fill the gap between winter and summer". ...I was laughing out loud! !!! love it
@socketuspuppetus12165 жыл бұрын
fuck, i did not get the joke until i read you comment!
@achillies404 жыл бұрын
Me too.
@florianbeck42834 жыл бұрын
@@socketuspuppetus1216 Me, too. I first thought way too scientific - like something with thermal expansion ^^.
@citylumberjack83813 жыл бұрын
Somehow this guy managed to fit his spicy humour in every 10 seconds of the video yet still manage to keep it educational and engaging. Bravo. That was easy
@karthimohan83343 жыл бұрын
Love the "how it's made" theme. This is a gem 🔥
@noahsabin73866 жыл бұрын
If an iternet meme became a machinist, this old tony is it.
@BrokenLifeCycle7 жыл бұрын
This has better jokes than How It's Made videos.
@wupme6 жыл бұрын
A funeral has better jokes than any How it's Made video
@MegKampen Жыл бұрын
This is the best out of thousands of spring making videos I've ever watched.
@dakotathacker38212 жыл бұрын
The format of this video is both humorous and extremely satisfying.
@axelmilan42925 жыл бұрын
"Available in all shapes and sizes...except the one you need." True for springs, screws, nuts, bolts, wrenches, screw drivers, taps, dies, and pretty much anything else you currently find yourself needing
@FreakSX934 жыл бұрын
try 5s
@HenryPiffpaff4 жыл бұрын
On a philosophical note: If you already had it, you would not need it. Think about that.
@LeglessWonder4 жыл бұрын
And women
@tylerblubaugh55493 жыл бұрын
@@HenryPiffpaff if I had it I still need it cause I lost the fucker
@nimmen3 жыл бұрын
This even applies when you decide to visit the hardware store for it. "No we don't have that one in stock. We used to, but there was no demand for it."
@nateamus7 жыл бұрын
I smash the like button on your videos much like a do the nacho cheese dispenser at a gas station: an irresponsible amount of times and with incredible force. Sadly, on KZfaq this produces only one "like" and no cheese, but you should know the outcome is equally satisfying. Keep it up, good sir!
@ThisOldTony7 жыл бұрын
ha! thanks Nateamus!
@fatfuzzypotato61137 жыл бұрын
This Old Tony is that a how it's made joke
@TopoPilot2 жыл бұрын
Nostalgia kicked in and I was back to my youth watching "How it's Made" on cable Tv. Thanks for "springing" me back in time.
@johnperkins630 Жыл бұрын
Your now bobs nephew, had me actually laughing out loud cause bobs your uncle. Loved the how its made theme and everything about this video. Been missing this old Tony so it made me look back at this video. A classic for the ages
@PracticalEngineeringChannel8 жыл бұрын
Love it.
@VaneyRio5 жыл бұрын
Practical Engineering i know I just found a good channel when I find you in the comments. Love your videos.
@soloreclipse945 жыл бұрын
I second that
@suprememasteroftheuniverse3 жыл бұрын
Just promoting his channel. KZfaqrs...
@tubester45678 жыл бұрын
haha "they come in all shapes and sizes except the one you want"!!
@sergioferreira57717 жыл бұрын
i fell on the ground laughing
@davidfarmer20497 жыл бұрын
I did actually stay vertical but with a genuine effort.
@y.z.65176 жыл бұрын
All inventors thought that at some moments...
@tahanneloc10 Жыл бұрын
The amount of humor and knowledge presented in this video is genius!
@phillmcmanus8601 Жыл бұрын
The first ToT video I watched.. I watched the whole thing, bought the spring I needed, and used the time I saved to watch every other video Tony has done.
@Ramdodge5827 жыл бұрын
Your humor is nice for breaking up the day.
@SuperElephant7 жыл бұрын
Very True! Loved it! Left with a big smiley face :)
@Falney5 жыл бұрын
I knew a guy once who was into those home made, sit and ride, mini steam trains. He was pretty anal about making every single little part for them, all the way down to tiny screws. Despite being a hobbyist, (retired welder) he looked like a godlike machinist to me. He made spring forming look like an art form. Sadly he passed away in 2006.
@BloopTube Жыл бұрын
And because of what he enjoyed and the dedication he had to it. He's still remembered long after he's gone. What more can someone ask for when they are gone but to be remembered fondly
@donaldsonnett17584 жыл бұрын
I freaking love your videos man. Always fun to see where your sense of humor ends up. This was even more interesting than a real how it’s made episode
@renski89763 жыл бұрын
lol, the narration is pretty funny, it's like How it's made, but the narrator's sarcasm is through the roof.
@tryAGAIN875 жыл бұрын
Oh mate. Those puns really wound me up hahahaha
@rudythecat73203 жыл бұрын
I see the corniness is contagious!
@videofudge3 жыл бұрын
Dont worry you'll bounce back
@tryAGAIN873 жыл бұрын
@@videofudge oooof. I re-coiled at that one...
@wernerhiemer4062 жыл бұрын
@@tryAGAIN87 If it makes ouch on your couch, you found one.
@NickMoore8 жыл бұрын
"If you're a bit touched like I am..." You just found your self another geeky friend!
@natemaia92374 жыл бұрын
Love this format with a light dusting of comedy. Keep up the great work!
@russellnixon99813 жыл бұрын
Never knew springs could be so much fun, informative funny and concise short film. Well made too, the film that is, and the spring.
@FairlyInconspicuous7 жыл бұрын
Funny, smart, thorough, educational, and a surprisingly high production value. You are awesome.
@ThisOldTony7 жыл бұрын
Thanks Derek!
@FennecTECH5 жыл бұрын
You’re watching this because a rather important spring pinged across the room winding up forever lost in another dimension arent you
@glendooer62114 жыл бұрын
Had a mate lost a spring spent the best part of the day looking for only to find in at the bottom of his 1/2 finished coffee.
@davidjones89424 жыл бұрын
...... maybe ......... why would you ask???
@frankberry96424 жыл бұрын
No, no, I'm watching it for a friend...honest.
@Digital-Dan4 жыл бұрын
Indeed I am. I thought it went down in the computer somewhere, but I never fou.......
@jessetaylorstudio4544 жыл бұрын
nah i'm making nipple clamps
@danwilkes381810 ай бұрын
How have I never seen this one? This is gold? The mocking of How its Made is genius.
@PivitalPvM4 жыл бұрын
I don't comment much, especially on older videos, but you have one of the most entertaining channels I have found on youtube.
@ThisOldTony4 жыл бұрын
thanks!
@ButBigger428 жыл бұрын
Damnit this video is so much better than I thought it would be.
@ThisOldTony8 жыл бұрын
Thanks Nick! (that makes two of us :) )
@saxon2157 жыл бұрын
this is the first this old Tony video I've seen I hope they're all this informative and funny.
@ThisOldTony7 жыл бұрын
That makes 2 of us.
@InnerBushman7 жыл бұрын
I've seen few of them so far and I can already ensure you you're in for a treat. :D
@Legend-fq8tz7 жыл бұрын
This Old Tony what type of music wire thicknes and stuff
@CrashTestCoder7 жыл бұрын
Legend 27 27 That depends on what specifications you need for the spring, consult the handbook
@jimmyma54356 жыл бұрын
Spark Gap ,do you suppose that without designing process is better than manufacturing one because the actual one will never get spring used ?
@randallsnow5311 Жыл бұрын
I always appreciate your sense of humor!
@natehohensee43292 жыл бұрын
Mr. Tony! This video just saved my butt. I needed to make hundreds of coils out of hypodermic tubing for a customer. God bless you sir!
@bradapprentice13978 жыл бұрын
Seamless, clear, concise; executed with precision, and… entertaining! Impressive, in all respects! Potential for positive impact on impressionable minds??? Stunning! Grateful for your gratuitous efforts, to freely share pearls of wisdom with any that will listen! Brad
@ThisOldTony8 жыл бұрын
That was quite eloquent, thanks Brad!
@joonasfi6 жыл бұрын
"You are bob's nephew" :D :D
@benvrakas66655 жыл бұрын
Bob's ur auntie
@YTANDY1005 жыл бұрын
@Joonas Loppi maybe some ppl watching this video thinking "but i was a girl a minute ago" , hehe :-)
@gnaeiuopl5 жыл бұрын
Is that an @AvE reference?!
@josepherwin87094 жыл бұрын
Bob’s your uncle...lolz.
@EURIPODES4 жыл бұрын
Actually I'm Bob's grandson
@dakotarunyan99623 жыл бұрын
Best tutorial style I've ever come across, thank you for all the entertainment and information.
@Butch07673 жыл бұрын
Love your sense of humor. I will click on This Old Tony even if I'm not interested in the topic. I will watch just for the quick witted humor.
@Askjerry8 жыл бұрын
I love the homage to "how it's Made"... nicely done.
@ThisOldTony8 жыл бұрын
Thanks Jerry!
@abhilashka15866 жыл бұрын
Takyou
@Anvilshock5 жыл бұрын
Actually, it's the opposite. How it's Made has a This Old Tony vibe to their videos.
@canesvenatici95885 жыл бұрын
I didn't smile even once watching mib yesterday. Thanks for making me smile it's been quite a while.
@MarioGoatseАй бұрын
I've scrolled all through these comments and I seem to be the only one that really appreciated the "Bob's your uncle" joke. It was said as "You're now Bob's nephew" but it reminded me of my mum who used to say "Robert's your father's brother".
@brianmunyon56692 жыл бұрын
At least the second time watching this always appreciate the videos. Love the "how it's made" kinda vibe, thank you TOT!
@rajwinderosahan7 жыл бұрын
i like your sense of humour. Cheers
@irritatedasshole54275 жыл бұрын
This channel is more fun than some comedy channels.
@marklewis47935 жыл бұрын
..and it's nourishing brain food,..comedy channels are sugary junk,
@cfnaround15852 жыл бұрын
Love the “how it’s made” theme. Also, best quote I ever heard about springs. “They come in many shapes and sizes except the one you need” nothing truer
@drreason29275 жыл бұрын
Your MANY puns and snarks are hilarious! Great episode!
@TarisRedwing7 жыл бұрын
lol I like the "How it's Made" vibe of this vid :D
@Anvilshock5 жыл бұрын
Actually, it's the opposite. How it's Made has a This Old Tony vibe to their videos.
@stevedaenginerd2 жыл бұрын
Thank you so much for this beautiful piece of art!!!! I find it a crime that in 6 months of -stalking- going through your catalog this is the first of this kind I have found!
@fredford7642 Жыл бұрын
My compliments on a really good video. Thank you many times over. I'm a machinist and have been making springs a long time, but your video has made this operation much easier. Again thank you
@nickd.99556 жыл бұрын
1:08 "Generally speaking" *Picture of a general speaking* Best pun ever.
@brandonbenjamin94524 жыл бұрын
Nick D. Ohhh I totally missed that the first 3 times
@petek2108 жыл бұрын
Why you don't have 100,000 subs is beyond me. Some of the best machining content on KZfaq.
@ryanh.88968 жыл бұрын
Poncho... I was just getting ready to type the same dern thing!!!!!
@ThisOldTony8 жыл бұрын
Not a day goes by I don't wonder the same thing. :)
@halcyonmje8 жыл бұрын
bit qwerky and a lot practical. great stuff.
@linkodemayo6416 жыл бұрын
Now he almost has 200,000 subs!
@R.B.L-Gemar6 жыл бұрын
Poncho likes bacon l .
@gasgiant71224 жыл бұрын
Great videos & your sense of humour is so in tune with mine! Thanks for sharing your knowledge.
@mirai_asik Жыл бұрын
I never knew that I was interested in springs. KZfaq knows me better than even myself.
@mxcollin955 жыл бұрын
This “How It’s Made” version had me laughing. This Old Tony your channel is great!
@heisenberg18334 жыл бұрын
Love the “how it’s made” spoof at the beginning
@tomquinn54376 ай бұрын
Excellent video! Thanks for teaching a curious old man a new trick.
@neatmachine3 жыл бұрын
Great video! I rewatch all your videos and catch things that I missed. Thanks
@WhereWhatHuh7 жыл бұрын
If you make two of these and leave them in a drawer..... Will there be offspring?
@roberthisus17577 жыл бұрын
haha lol
@asdf71087 жыл бұрын
put em in a glass of water and you have spring water :D
@scottlund45627 жыл бұрын
Store a few on the floor for when you are older and need a spring in your step...
@rockstar349606 жыл бұрын
WhereWhatHuh you're going far kid
@InsideOfMyOwnMind6 жыл бұрын
It depends on the spring rate.
@FixItAngel5 жыл бұрын
Great content. I love this channel.
@ThinMint_OG3 жыл бұрын
How it’s made
@DeetexSeraphine Жыл бұрын
I played this for a prospective romantic interest. We had a lovely evening. Thank you, Tony!
@Locane2562 жыл бұрын
Best How It's Made video I've ever seen 10/10 would watch again
@19dannydude977 жыл бұрын
I love the how it's made theme.
@youtubereligion69484 жыл бұрын
7:30 "patience and bit more care than being demonstrated" is the best joke on how to video
@MsOsoris Жыл бұрын
This is off the best videos I’ve ever seen, I clicked thumbs up twice
@ekij133 Жыл бұрын
Thank you for sticking to the point and stretching my understanding of this topic.
@ventheman84185 жыл бұрын
Why am I watching a guy make springs at 2 am
@irlporygon-z69295 жыл бұрын
wow, i'm doing the exact same thing maybe we should sign up for group therapy together
@ken4819595 жыл бұрын
So you can spring out of bed in the morning?
@reallife33385 жыл бұрын
For the same reason I am at 3:24am.... No clue but he's funny as hell
@candlestyx85175 жыл бұрын
Im doing the same thing at 4 AM
@tuck64645 жыл бұрын
4:19
@ErisDiscordia057 жыл бұрын
Love the puns man. Keep up the good work.
@davidkaye8212 жыл бұрын
I just now got the homage to "How It's Made". Very subtle, nicely done!
@arioch763 жыл бұрын
Allways a pleasure to watch your channel !
@davidfrancis87615 жыл бұрын
Always enjoy you videos. Just made my first spring using your technique. Success came on the third attempt, on the first attempt the mandrel was too big a diameter, the second attempt I ran out of wire, its surprising how much it takes so should have calculated it beforehand, never mind I'm sure that shorter spring will come in handy one day. I used your idea of the tool holder with a piece of delrin (acetal) sheet to provide the friction. I haven't read all the comments so I don't know if this has been raised before, but I found that it was worth adding a few extra non-functioning turns at each end because the start and finish turns were not wound as tight as the rest and were a larger diameter. I then trimmed the extra turns off. All in all a perfect spring for my modified screw-less milling vice.
@RRINTHESHOP8 жыл бұрын
Well done, fun vid, enjoyed.
@schlenbea2 жыл бұрын
"you're Bob's Nephew" had me going 😂😂😂
@carterscustomrods3 жыл бұрын
I wish the 2nd part of this was episode was available. Seeing how a Speculum is manufactured, and tested, really brought this episode full circle.
@Tenacious213 жыл бұрын
This was my first ToT video, and I still come back all the time.
@cheesynuts42913 жыл бұрын
Good stuff. I’ve been feeling a little down lately. This has helped me put the spring back in my step. Watching old people fall after stepping on a spring loaded stair really cheers one up.
@Rick_Cavallaro2 жыл бұрын
This is the best video about homemade springs that I've seen today!
@mermodfreres3 жыл бұрын
Great tutorial....I needed to make some small springs for an antique music box motor....really helped me do it safely!
@caseylocke44745 жыл бұрын
"You're now well on your way to shooting your eye out." LOL!
@mattthomas40267 жыл бұрын
The first 30 seconds I thought this was a legit how it's made tv exert
@Anvilshock5 жыл бұрын
Actually, it's the opposite. How it's Made has a This Old Tony vibe to their videos.
@rossrrandall5 жыл бұрын
Same. I double checked the description, thought I had hit the wrong video.
@smorrow3 жыл бұрын
As if that's not enough, there's a KZfaqr who overdubs ACTUAL How It's Made episodes...
@adamjo51814 ай бұрын
best intro, better than most standup specials.
@CelsoCoslop2 жыл бұрын
A nice sense of humor, and a good video too.
@thomolicious05 жыл бұрын
This is my favorite video on KZfaq. Everytime I see it in my feed I have to watch it again. Keep up the good work @thisoldtony
@floobertuber8 жыл бұрын
Imagine the potential of the human race, if everybody were as skilled with their hands, and sharp with their wit, as this guy. SUBBED!!
@lolwut694 жыл бұрын
I absolutely love this channel and your commentary
@Oatmilk1234 жыл бұрын
Brings me back to the old days of late night science channel binging
@Gearheadtom5 жыл бұрын
"Unless you have to duck everytime it comes around, mandrel run-out isn't that important" Lost it haha
@jrevillug4 жыл бұрын
That got me too. 😂
@HenryPiffpaff4 жыл бұрын
I didn't get that, could you explain it to a foreigner?
@jrevillug4 жыл бұрын
@@HenryPiffpaff If you need to move out of the way of the mandrel on each rotation, you probably have too much run out on the mandrel. Otherwise, it doesn't matter much. Imagine the mandrel being 30cm off centre. 😉