MAKITA 40V XGT Rear Handle 7-1/4 inch Circular Saw Review | GSR01 | ep.14 | Fastest saw ?

  Рет қаралды 14,753

4thewin

4thewin

Күн бұрын

We take a look at the fairly new to market 40v XGT saw from Makita.
Rear handle design and looks similar to the 18v x2 LXT model the XSR01.
Has upgraded specs. but does it perform as you would expect?
Yes. Performs well. With a 4ah battery it's currently the 2nd fastest saw on the leaderboard.
Good refined feeling, upgraded speed, added blade wrench storage, added dust port is just the simple list of upgrades over the XSR01 model.
OUTPOWER: Makita-built brushless motor delivers up to 6,400 RPM for faster cutting performance
OUTSMART: Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
OUTLAST: XPT is engineered to provide increased dust and water resistance in harsh jobsite conditions
2-9/16" cutting depth allows cutting of 3X lumber in a single pass
Electric brake for maximum productivity
Bevel angle up to 53º, with positive stops at 22.5º and 45º
Ergonomic design at only 11.7 lbs.; up to 1.5 lbs. lighter than corded models
Increased maneuverability due to lightweight design and Magnesium diecast base
Onboard offset wrench for fast and easy blade changes
The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
The XGT Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
The XGT Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
The XGT Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
Compatible with Makita 40V max XGT Lithium-Ion Batteries
3-year limited warranty on tool
-------------------------------------------------------------------
Instagram: / ak4thewin
Twitter: / 4thewin8 | 4thewin8
Site: www.vlog.4thewin.net/
Facebook: / ak4thewin
-------------------------------------------------------------------

Пікірлер: 59
@IMPACT-NATION
@IMPACT-NATION 2 жыл бұрын
IMO, I don’t think you get enough credit from the tool tube community for the value that you bring and the content you provide. Just wanted to let you know I appreciate you brother. Ended up going with the XGT recip instead of the Super sawzall. Thanks a lot my man. Can’t wait to get my hands on it
@4thewinak
@4thewinak 2 жыл бұрын
I appreciate that!
@IMPACT-NATION
@IMPACT-NATION 2 жыл бұрын
@@4thewinak anytime brother
@TacticalThib
@TacticalThib 2 жыл бұрын
Seriously he is definitely one of the most informative and best testing of all tools not just one brand 👏 deffinatly one of my favorite channels.. 4thewin bro your killing it
@IMPACT-NATION
@IMPACT-NATION 2 жыл бұрын
@@TacticalThib 🙏well said my brother 👊
@TacticalThib
@TacticalThib 2 жыл бұрын
@@IMPACT-NATION ive been watching 👀 you to bro keep it up I watched a few vids lastnight 👌 👍 you guys are awesome
@jamallaidley4718
@jamallaidley4718 2 жыл бұрын
My Go To Saw it's great
@4thewinak
@4thewinak 2 жыл бұрын
it is for me too now.
@jamallaidley4718
@jamallaidley4718 2 жыл бұрын
@@4thewinak cool
@247Combat
@247Combat Жыл бұрын
Currently my fav saw, thanks for the review
@MasteringMayhem
@MasteringMayhem 2 жыл бұрын
Do love that quick bevel stop feature. Great rear handle saw. 🙂✌️❤️
@makingithappen4308
@makingithappen4308 2 жыл бұрын
I like the format of your reviews. Nice work.
@4thewinak
@4thewinak 2 жыл бұрын
Glad you like them!
@jaycehezekia441
@jaycehezekia441 2 жыл бұрын
thanks man, appreciate the excel sheets!!!
@barttrahan7037
@barttrahan7037 2 жыл бұрын
Thanks love your videos they're the best for saws. I can't wait till you get the new metabo rear handled saw and see where it stacks up
@4thewinak
@4thewinak 2 жыл бұрын
That's the plan!
@OUTILSCLIPSQC
@OUTILSCLIPSQC 2 жыл бұрын
Very nice thank you for this 😎
@4thewinak
@4thewinak 2 жыл бұрын
My pleasure 😊
@Idunnoaboutyou
@Idunnoaboutyou Жыл бұрын
Good review bro
@aaronoconnor606
@aaronoconnor606 2 жыл бұрын
If they made a track compatible rear handle saw. I would probably buy it.
@whilomforge3402
@whilomforge3402 11 ай бұрын
I have a U.S. model of the 36 volt saw, and it has a dust port. Been using it for years, without issue. I look forward to getting the xgt, though.
@LiLNuBZz
@LiLNuBZz Жыл бұрын
Watching this before buying the saw 🎉
@adu1978
@adu1978 2 жыл бұрын
Definitely buy that saw
@4thewinak
@4thewinak 2 жыл бұрын
Yes
@dreamcat4
@dreamcat4 2 жыл бұрын
thanks for this review. in terms of the non standardized dust ports problem, then maybe we just need to print our own with a 3d printer. this tool is also useful for making other custom accessories for example router jigs / router templates. of course 3d printer does bring its own set of problems and hassles. but maybe the long term payoff is worth the trouble. lol mine is still a pile of spare parts. never got it working and has been sitting there, unusable for over a year. unfamiliar new technologies. haha
@4thewinak
@4thewinak 2 жыл бұрын
yeah. so far i've been able to get by with the interchangeable vac hose ends, but it does get annoying when im without it.
@bartfoster1311
@bartfoster1311 2 жыл бұрын
The only saws I have ever seen that used the diamond arbor was Ridgid. All my LXT saws have the 5/8 arbor. Just picked up this 40v beast.
@4thewinak
@4thewinak 2 жыл бұрын
Yes that is correct. i thought i threw up a correction title. Some how did not make it into the final cut..
@ProxyFinal
@ProxyFinal 2 жыл бұрын
There's a version 2 of XSR01. You gotta try the Metabo HPT. May not be the most powerful, but it's lightweight.
@4thewinak
@4thewinak 2 жыл бұрын
Didn't know. Thanks for the tip! I think i need to get my hands on one of those...
@baseballdude8491
@baseballdude8491 2 жыл бұрын
Yeah we have two of them now and everybody on the Jobsite fights over the Metabo s and we have the Milwaukee and Makita's I'm turning the Makita into a "Prazi beam saw" and using the Metabo s for most of the framing it's so much lighter and the feel and site line is so nice to use
@ProxyFinal
@ProxyFinal 2 жыл бұрын
@@baseballdude8491 I am keeping an eye on the Flex right now….I like that dust shoot and that new battery
@baseballdude8491
@baseballdude8491 2 жыл бұрын
@@ProxyFinal yeah I think the Flex battery power looks promising but at 2+lbs heavier @ 10.1lbs w/out battery and 13+lbs with the 10amhr battery that is exactly why our guys are loving the Metabo HPT cuz the DeWalt,Milwaukee and Makita are all over 13+ lbs w/batteries that extra 2lbs makes them less manageable when making cuts in awkward angles and setting(which we do on a regular basis framing) If the Flex was being used for my Prazi beam saw or a stationary cut station then maybe it would make some sense but the great site line , power and control we get from the Metabo HPT is just a framing game changer+ we use the. Other 36V tools on the jobsite and some of them like the table saw, Mitre saw, SDS Max rotary hammer, grinder etc we run with the AC adapter and allows us longer run time and gives the batteries a break and in turn allows them to last longer
@ProxyFinal
@ProxyFinal 2 жыл бұрын
@@baseballdude8491 man, it’s definitely not the best, but it’s pretty slick. It cuts through anything without bogging down. I slap a 8.0 battery instead, but the thing is actually a little lighter than the Milwaukee surprisingly. I took advantage of their deal where they took 150 off my purchase. Got rid off the Milwaukee. Waiting on the xgt to arrive which I got for my Father’s Day
@terryhill4100
@terryhill4100 Жыл бұрын
i like the duel battery saw
@almerino3497
@almerino3497 2 жыл бұрын
You should try it with an 8.0 battery when they hit the market
@4thewinak
@4thewinak 2 жыл бұрын
waiting patiently....
@jameshaime4202
@jameshaime4202 2 жыл бұрын
Great video. I just sold my LXT model and going to purchase the XGT. Would tell me your experience with the weight differential? They look identical sizewise. I'd appreciate it, thanks.
@Joyjoiner
@Joyjoiner Жыл бұрын
How does the 190mm bosch profactor biturbo skilsaw compare to the 40v makita, Thanks for your excellent reviews Regards Liam
@athenanimbuss6826
@athenanimbuss6826 2 жыл бұрын
Great review 👏 What do you think of this saw vs Metabo multivolt? 👍🙏❤
@4thewinak
@4thewinak 2 жыл бұрын
I actually like both. A lot of times i find myself going for the metabo hpt mainly due to weight, but the makita is usually one i use for rip cuts. in most cases i find both of them. one closer to materials, and one closer to where im working. Both of the saws are great, and i would put both in the top-tier class for user-friendliness and refinement.
@trevorantoine5586
@trevorantoine5586 2 жыл бұрын
Hmm I like the rear handle but I like the Makita HS00G3Z . I wonder what one is better?
@jerryz754
@jerryz754 2 жыл бұрын
Thanks
@4thewinak
@4thewinak 2 жыл бұрын
Welcome
@jerryz754
@jerryz754 2 жыл бұрын
My saw broke from the spindle lock, do you know where I can get it?
@Root_Toor
@Root_Toor 2 жыл бұрын
👍
@3dandyrandy3
@3dandyrandy3 5 ай бұрын
My LXT uses a round 5/8ths arbor.
@emanuelrodriguez-salas9400
@emanuelrodriguez-salas9400 Жыл бұрын
What’s the battery life comparison?
@TacticalThib
@TacticalThib 2 жыл бұрын
Thats not the same 36v makita I have a dust port is that the very old model?
@4thewinak
@4thewinak 2 жыл бұрын
this is the XGT model.... the USA 36v LXT rear handles don't have dust ports.. at least none that i've seen.
@TacticalThib
@TacticalThib 2 жыл бұрын
@@4thewinak i have one in my box bro it has a little rubber plug in it I often forget to pull it out...
@Vasiliy_Aliev
@Vasiliy_Aliev 2 жыл бұрын
5ah battery когда будет ?
@4thewinak
@4thewinak 2 жыл бұрын
i don't have one yet, but i'll see if i can get one.
@Vasiliy_Aliev
@Vasiliy_Aliev 2 жыл бұрын
можно я использую твое видео на своём канале?
@4thewinak
@4thewinak 2 жыл бұрын
Sure, of course.
@Vasiliy_Aliev
@Vasiliy_Aliev 2 жыл бұрын
@@4thewinak смотри что получилось kzfaq.info/get/bejne/n7hlkryA0tLMfok.html вот моя пила kzfaq.info/get/bejne/oMdpiJZmm9W5XYE.html
@jaym1057
@jaym1057 2 жыл бұрын
I had to watch it twice 👍!!! Do not get left behind = P-R-O-M-O-S-M .
Makita 40v XGT GSR01Z 7-1/4" vs. Skilsaw Mag 77 Circular Saw Review
16:06
Essential Craftsman
Рет қаралды 179 М.
Советы на всё лето 4 @postworkllc
00:23
История одного вокалиста
Рет қаралды 4,6 МЛН
Comfortable 🤣 #comedy #funny
00:34
Micky Makeover
Рет қаралды 9 МЛН
لقد سرقت حلوى القطن بشكل خفي لأصنع مصاصة🤫😎
00:33
Cool Tool SHORTS Arabic
Рет қаралды 29 МЛН
IQ Level: 10000
00:10
Younes Zarou
Рет қаралды 12 МЛН
Dyno Test: This Brand Makes the #1 Cordless Circular Saw
12:17
Torque Test Channel
Рет қаралды 147 М.
Flexvolt VS XGT Rear Handle Saws!
13:12
Renovations and Repair
Рет қаралды 9 М.
2 Years with Makita 40v: Here's What I Think!
18:41
Scott Brown Carpentry
Рет қаралды 463 М.
Советы на всё лето 4 @postworkllc
00:23
История одного вокалиста
Рет қаралды 4,6 МЛН