Makita DTD170 & DTS141 Impact Driver Review

Makita DTD170 & DTS141 Impact Driver Review - Roundup #4

Рет қаралды 206,767

6 жыл бұрын

In the fourth part of our Big Impact Driver Round Up Roger takes a look at the Makita DLX2211TJ 18v 2 Piece Combo Kit LXT containing the DTD170 & DTS141 Impact Drivers.
DTD170Z
=======
New impact mode (A-mode): helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening
T-mode: Tightening mode for self-drilling screw
Electronic 4-stage impact power selection.
Brushless motor
Electric brake
Variable speed control by trigger
Forward/reverse rotation
LED job light
Compact overall length of 117mm
One-touch bit installation
Ergonomically designed high comfort grip.
Blows per Minute (Max) - ipm 0 - 3800 ipm
No Load Speed (max/hard/med/soft) 0- 3600 / 3200 / 2100 / 1100 rpm
Battery TypeLithium-ion
Body only machine
Voltage 18 v
Impact Selection 4 stage + Tek mode + Assist mode
Driving Shank 6.35mm (1/4") Hex
Blows per Minute (Hi) - ipm 0 - 3600 ipm
Blows per Minute (Med) - ipm 0 - 2600 ipm
Blows per Minute (Lo) - ipm 0 - 1100 ipm
Machine Screw M4-M8
Standard Bolt M5-M16
High Tensile Bolt M5-M14
Coarse thread (length) 22 - 125 mm
Noise sound pressure98 dB(A)
Noise sound power109 dB(A)
Noise K factor3 dB(A)
Max Fastening Torque 175 Nm
Vibration: Fastening Bolt12.5 m/sec²
Vibration K factor1.5 m/sec²
Net weight1.5 kg
DTS141ZJ
========
Compact and quiet
Two impacts per rotation.
Electronic 3-stage impact power selection (Hard/Medium/Soft)
T-mode: Tightening mode for self-drilling screw
Battery fuel gauge
Variable speed control by trigger
Forward/reverse rotation
Electric brake
LED job light
One-touch bit installation
Ergonomic soft grip
Battery TypeLithium-ion
Body only machine
Voltage 18 v
Driving Shank 6.35mm (1/4") Hex
Blows per Minute (Hi) - ipm 0 - 2,700 ipm
Blows per Minute (Med) - ipm 0 - 2,200 ipm
Blows per Minute (Lo) - ipm 0 - 1,400 ipm
Machine Screw M4-M8
Standard Bolt M5-M8
High Tensile Bolt M5-M6
Noise sound pressure77 dB(A)
Maximum Output 280 w
No Load Speed (hard/med/soft) 0-3200 / 2000 / 1200 rpm
Max Fastening Torque 40 Nm
Vibration: Fastening Bolt7.0 m/sec²
Vibration K factor1.5 m/sec²
Net weight1.5 kg
#Makita #powertools #cordless
===================================================
Don't forget to stay up to date with Skill Builder!
Join our mailing list - skill-builder.uk/join
Visit our website - skill-builder.uk
See our Tweets - / skillbuilderuk
See our Facebook Page - / skillbuilderchannel
See our Pins - / skillbuilder1

Пікірлер: 111

@davidyoung1610 Жыл бұрын

Out of all the reviews on KZfaq, this is the only one that effectively compares and shows the difference in noise levels between this oil impulse driver and its conventional counterpart. Well done 👍🏻

@jettschenker Жыл бұрын

The way you edited to quickly switch back and forth between the two for the noise text was exactly what we needed. Brilliant!😀

@gabrielstein3680 2 жыл бұрын

*Awesome combo **MyBest.Tools** Veeeeery powerful especially for size. And the batteries last well. When charged and stored they don't lose power like my old bulky ones did.*

@paulwharton1850 6 жыл бұрын

Really excellent, comprehensive review - I learnt a lot. Many thanks.

@bocty1 3 жыл бұрын

brilliant, I was struggling to decide between the two and you've made the decision for me

@555sutherland 6 жыл бұрын

Fantastic review. Pleasure to watch, thanks

@SkillBuilder 6 жыл бұрын

Thank Seb. Good to know

@Wolvenmoon 6 жыл бұрын

After a ton of reviewing on all the power tools avalible in my area I decided on makita for my trade in HVAC and boy oh boy I do not regret it!

@akeenpresidential2761 5 жыл бұрын

I have Milwaukee. It's great as well

@MapSpawn 5 жыл бұрын

This review was top notch, thank you very much! The dewalt impacts become excruciatingly loud after they become used. I'd probably grab the soft impact, not too common I drive 14" GRK fasteners into timber, and you can just grab the nut buster for that.

@TheAudiostud 6 жыл бұрын

"What did you have in your pockets" Thanks for another cracking video Roger & Team

@SkillBuilder 6 жыл бұрын

Money

@antonylopez5742 6 жыл бұрын

so far best impact I've own.

@Thundra74 3 жыл бұрын

Nice! i often have difficult to undestand english speaking from UK due Accent except YOU! Very easy to understand without need to put subtitle ON

@SkillBuilder 3 жыл бұрын

Thank you so much for that. I really care about the English language and it saddens me to see the way that English people seem to have no pride in it. I often hear the most beautiful English from people who have learned it as a second language.

@eddie19011987 6 жыл бұрын

Great review Roger can't wait to see the next video

@SkillBuilder 6 жыл бұрын

Thanks Chris It is coming this week

@TenSapphires 6 жыл бұрын

Skill Builder Roger that!

@samgab 6 жыл бұрын

It will be great when they come out with an impact driver like this for mechanics where you can dial in the exact torque you need and it will torque bolts up to that torque. Like a fast torque wrench.

@chrisfi3d 5 жыл бұрын

$$$

@ryanedgar4480 5 жыл бұрын

Hilti just released that exact tool this week

@gypsy_on_drugs1285 5 жыл бұрын

manual torque wrench the bolts still just to make sure its acutally like 120Nm

@ownyourworld 6 жыл бұрын

141 looks good , I like the noise reduction

@Federer2001 6 жыл бұрын

great review guys!

@SkillBuilder 6 жыл бұрын

Thanks Roger

@krbuilders4685 6 жыл бұрын

Skill Builder love the makita fluid drive got one love it

@syproful 6 жыл бұрын

The 170 is monster. I use it evryday.

@Justsome_Randomdude 6 жыл бұрын

Excellent video

@SkillBuilder 6 жыл бұрын

Thank you AAS. I hope you watch some more of our output.

@LewisBeckman 5 жыл бұрын

Excellent video. You can definitely tell the difference in noise from the video, but how notable is the difference in your view?

@azemzuzaku7811 5 жыл бұрын

Great video

@SkillBuilder 5 жыл бұрын

Thanks Azem

@viktorsvinogradovs8178 3 жыл бұрын

Отличное видео. Спасибо👍

@johnpaddy8195 5 жыл бұрын

Good man! 😎

@michaelallen6208 Жыл бұрын

Love your videos. But honestly, for driving long screws a drill driver will work twice a quick but heavier.

@danmorgoshi7598 4 жыл бұрын

Thanks..!! Thank u so much...

@choonwahyee9101 5 жыл бұрын

Hi! After viewing, many videos on power tools cordless drill 's ! Many branded 's , many color's , many smiles, many plans , many keyless! But ..... Only one ' drill 's , are no ....... Or low ........ Noises!!!!!!! I see ! I knows! By now !!!! Not to late to learn's! The power of sounds! Makita ! So solid '

@minkis18 6 жыл бұрын

I've actually found a good powerful drill driver to be faster than my impact with lag bolts. I was wall mounting a TV and my drill was probably twice as fast as my impact. I still love my impact driver for Phillips screws as it really helps resist caming out.

@SkillBuilder 6 жыл бұрын

Oh Chris you stole our thunder. We have made that point in our comparison which is coming up soon. The impact driver is smaller and easier to use but when it comes to speed even the best of them are not as fast as a good drill.

@NirreFirre 6 жыл бұрын

Would this guide be useful with this new information I haven't understood before? www.its.co.uk/blog/buying-guides/makita-drill-2018-edition/ I meant to say, could a home gamer get by with a drill (with care taken on Philips)? Makita LXD is in a way overkill but as one just looking to "buy and cry once" in one manufacturer/brand of cordless system I think this is a more responsible way of consuming..

@davidyoung1610 Жыл бұрын

Frankly, for galvanized lag screws I much prefer using a strong drill/driver. An impact drill causes quite a bit of damage to the coating.

@whitacrebespoke 5 жыл бұрын

I have the DTD170 it’s incredible it’s bloody noisy though.

@ryanedgar4480 5 жыл бұрын

New makita dtd171dz from Japan is amazing not released in UK yet but well worth buying from Japan

@Simonsimps 5 жыл бұрын

Where did you buy it from please ?

@ryanedgar4480 5 жыл бұрын

@@Simonsimps hi bud from a guy on gumtree his name is kosta, just type in makita impacts, or you can buy from ebay from Japan bud it takes weeks to arrive and you get hit with import charges aswell

@Simonsimps 5 жыл бұрын

@@ryanedgar4480 thanks very much Ryan. Cheers

@ryanedgar4480 5 жыл бұрын

@@Simonsimps no worries Simon, well worth the purchase, best impact av had and used,

@hennykools1935 6 жыл бұрын

goed ding de beste

@insightautobot9304 4 жыл бұрын

what is ‘dts141 & dtd170’ anvil type? mz or nz?

@Boboroska 6 жыл бұрын

Has dhp481 been upgraded and if so what is the latest model that has replaced it and which impact drive has more power between the dtd129 and dtd170 ,I want to purchase one of them but I’m not sure which one has more power

@jacobsebastien3910 6 жыл бұрын

Cooler box 170

@jerempoulin7584 5 жыл бұрын

Anybody knows the difference between the 170 and the new dtd 171x !?

@aderetAC-Art 5 жыл бұрын

What do you doing after the test with the drills if you sell it second-hand?

@krzysiekv12 5 жыл бұрын

Always interesting sell as new unboxed lol

@TGritzencoFerramentas 6 жыл бұрын

I’m not really fascinated for Makita, but those one looks really good tools, I need to check if it’s worth the price.

@brandansystemtests1077 5 жыл бұрын

What was that intro song

@johnpaddy8195 5 жыл бұрын

The fluid drive is louder... I have the DTD and its an absolute monster of a tool. The difference in power between setting 1 and 4 is Incredible. The auto function is also really useful. Strongly suggest The DTD!

@mikhaildotsenko9020 6 жыл бұрын

шикарные шуруповёрты

@andrewhunt4532 6 жыл бұрын

What do you mean by fluid oil on the Makita dts141

@SkillBuilder 6 жыл бұрын

It is a fluid impact driver which works by forcing hydraulic oil through to drive the rotor.

@Joshismack 6 жыл бұрын

Would love a head to head against the milwaukee surge

@carlosgamalielcontrerasagu3322 6 жыл бұрын

JN Mackall i won't head to head too.

@mainsource8030 5 жыл бұрын

american version has the bit you can just push in, strange they left that out of yours

@handymanmychell9134 6 жыл бұрын

I prefer the tdt170

@jacobsebastien3910 6 жыл бұрын

Makita = Power an Quality.

@DonTomWilloughby 5 жыл бұрын

*and

@bbardy3924 6 жыл бұрын

im about to take back my impact driver with the four speeds, it is too slow to drive screws into decking and metal. Then the fastest setting is way too fast. My mate using his old makita impact driver worked way better and didnt have four speed settings. Going to take it back and exchange it for older model

@garretthigginbotham6122 4 жыл бұрын

Man...I wish makita tools were the color of the ones in your thumbnail...

@samsingh2042 4 жыл бұрын

Have you seen how expensive the Makita DT171 is, and thats body only body only

@saruntools 2 жыл бұрын

oil impact is way better i realy love it never look back to basic impactdriver again

@SkillBuilder 2 жыл бұрын

I agree

@igorzacarias1865 11 ай бұрын

Price was great.

@Undisputed_King 16 күн бұрын

I wanna buy one but it's £450 here in the UK now. That's too expensive

@RawLu. 5 жыл бұрын

\m/ Makita \m/

@ariagnasosa6577 6 жыл бұрын

Guau

@THEashbeck 3 жыл бұрын

What i need is a small impact driver, why do they start building space schips around impact drill. with all this electronic ffs.

@SkillBuilder 3 жыл бұрын

You can still buy a basic model

@THEashbeck 3 жыл бұрын

@@SkillBuilder Is it same size ?

@addnet4 6 жыл бұрын

Simple fix with the 'one touch chuck'..... buy the Makita XDT12 from the States. Same as the Makita DTD170 but for some reason the Americans get the better chuck. Be warned though, the Japanese imports you see on eBay have a 'one touch chuck' but over there the 1/4" bits are made longer and our bit holders will have a lot of end play. I can't understand why Makita make 3 different versions all have 'made in Japan' stamped on the casings. Maybe Roger you can find out why the USA get the better chuck and it's not just the DTD170 that is missing out, all the American Makita impact drivers have the 'one touch chuck'. Seems that the UK / European customers are being sold an inferior machine!!😤

@SkillBuilder 6 жыл бұрын

I will find out. I don't speak Japanese but I will watch their body language

@SkillBuilder 6 жыл бұрын

This is from Makita U.K in Japan A very interesting question on the one touch chuck. Having gone right back to Makita Japan we are told that it was offered to Europe previously but that customer’s response was negative. "The ‘inferior’ comment is unjustified and because every Makita tool, regardless of the range it sits within, is manufactured to the same exemplary standards as you would expect from this global brand. Equally, customers make their choice of specification to best suit their operations." So that is their answer. Do you think you might have hurt their feeling? I would say that if they only offer one chuck or bit holder in a certain market there is no real choice, unless you chose another brand. I would be interested to hear from everyone who reads this whether they like the one touch or not. I can't see any drawbacks so I am not sure who said they didn't like it.

@addnet4 6 жыл бұрын

From personal experience the 'one touch chuck' is the way forward. More and more of Makita's competitors are using this chuck, so maybe its time for them to have a rethink. Surly they wouldn't want to start loosing sales just because someone said the UK market didn't want that feature, I really can't see any negatives against the 'one touch chuck'. I wouldn't buy another impact driver without it, it's so much quicker just push the bits in, no more fumbling about with two hands.

@SkillBuilder 6 жыл бұрын

Addne14 I completely agree and I am fairly certain that Makita will look at this again

@James_Edward59 6 жыл бұрын

addnet4 not all the Makita impacts have the one touch chuck the xdt12 is the only one with the one touch Chuck there might be one other but every single other impact even the new subcompact ones don’t come with one touch chuck.

@leviSyosef 6 жыл бұрын

on your video they do the same i did not see diffrence its not making any sense ....

@SkillBuilder 6 жыл бұрын

one is a fluid drive so it is quieter

@leviSyosef 6 жыл бұрын

Skill Builder i meant the power not the noise

@SkillBuilder 6 жыл бұрын

We have just finished testing the torque on all these drivers and the video will be out soon. It is surprising

@joeestlea8375 6 жыл бұрын

Does anyone else also think that cramming technology into a tool is making it less robust and that if your using pro grade tools, you shouldn’t need the tool to adjust its power. Were men, not children

@detailingdiaries6562 5 жыл бұрын

Grow up

@samsmith3025 5 жыл бұрын

Agreed, reminds me of some of the tech in new cars, it just isn't relevant to driving. And the tools dont need it to get the job done.

@ovi_4 4 жыл бұрын

I would very much like to be able to buy the oil hydraulic version but who on earth has that kind of money to pay around £300 for body only (even now in 2019 Novembre) ?????? Jesus...... Tnx. but no Tnx. DTD170 or cheaper model should do just fine.