★ *REVIEWING **amzn.to/3gelYMm** NEED MORE INFO? ✔︎ THE ⬆︎DESCRIPTION⬆︎* ★ *CORRECTION: I mistakenly wrote bi-amp, it should read, bi-wire. You can use the 2nd zone to bi-wire a single pair of loudspeakers via the NR1200.*

This is the video and product that has sent me into an audiophile rabbit hole-(approximately $5000+ in so far) the past year. AR has been essential in my hifi journey with his slick video production, knowledgeable and entertaining videos and products that are fascinating to learn about regardless if I can afford them or not. I use the NR1200 has a preamp with two Jamo S808 subs, Klipsch RP600M, two Crown XLS1002, bridged giving me a stupid amount of power along with my video sources: Apple TV, Roku, FiOS, 46 inch Phillips TV which has provided me with a phenomenal entry level starter system that I have been enjoying literally ever since I saw this video. So kudos to Andrew and his success and please keep up the fantastic work!

"the only person who has to like the sound of your soundsystem is you". -Love it!

Thanks Andrew! Picked one of these up last week and have been thoroughly enjoying it driving some vintage Spica TC-50's (4ohm!) and a Definitive Technology SuperCube 4000 sub. Your review of the sound was spot on. Loving it. Thank you!

Excellent video Andrew! I have an NR1200 for three weeks now. It should be noted I am used to the "Denon" sound - including a test system with 1-AVR-3700H which I had connected to a 2-Emotiva Amp A3 then 3-Definitive Technology 9060 speakers. With this 1-2-3 combination I really enjoyed the sound, depth, clarity and presence of all types of music and movies. For a new room I am building, I was looking for a 2-channel Pre-Amp and the NR1200 checked all the boxes on paper. So I switched the Denon AVR-X3700H in this trio with the 1-Marantz NR1200 connected to the 2-Emotiva Amp and 3-BP9060 speakers in the distance and angles in open air to match the original setup...The sound after changing the Denon with NR1200 Amp, the sound was clearly transformed from a medley of beautiful sound into "oily, heavy buttery" sound. In my opinion, this NR1200 is a great entry-level Marantz-sounding Amp. When I say Marantz-sounding it appears as though there is a specific "flavor" to the sound that is really up to the listener. IMO it's not for me. My first impressions were that most of the liveliness of the sound (i.e. feels like around 1K and several areas in the higher frequencies are missing. For example the high-frequencies of the hi-hat on drums, certain vocal ranges and fine higher-frequencies are simply missing from the source). I know the speakers produce so much more range and depth of sound but even with the amp boosting the power at low volumes, I have a hard time listening to music I am familiar with without accepting there is so much sound removed from the source. The NR1200 can produce allot of volume but it is just loud and muddy. Even pushing the volume up doesn't present the sounds that are missing at lower volumes (and yes I played with the D-MAX settings, base and treble (STEREO mode), switching to PURE and PURE DIRECT also had those same mid-high frequencies missing (Dance, Techno, Rock, Smooth Jazz, R&B and meditation music). This NR1200 does sound pretty sweet to symphony music though... My testing of sound with the NR1200 was using Bluetooth, Apple AirPlay2 and Google Chromecast (via HDMI source "Media Player" position 4) . I listened to a variety of musing streaming using Spotify, Amazon Music and Pandora from an iPhone 12 and Samsung S10e. The sound using the Chromecast was much clearer with way superior buffering - even from the iPhone 12! But even with the Chromecast bringing clearer source sound, the NR1200 has been tuned to have that smooth, buttery sound kind of ruining the experience for my ears. Maybe with smaller speakers it would be more balanced but for my BP9060 speakers it sounds too rich, flat and buttery-base. I am returning the NR1200 to Best Buy simply because I want more features and get that Denon "sound" I have learned to love. I will be upgrading the AVR-3700H with the AVR-X4700H (Best Buy sold out so buying from Denon direct), and replacing the NR1200 with the AVR-3700H for my new room. I will be so fun! Great video - very concise. It's not easy to describe sound coming from different components. This video helped me so much thank you!!

I’m currently looking for an NR1200 and your review was relevant for me. I felt that your presentation and personal comments were honest and refreshing

Thanks for the review, ordered mine today! First new receiver in 20 years, very excited.

Thanks for putting your review out there. I've been considering purchasing this item since August or so. Kept waiting for reviews to show up. Seems like in just the past two weeks, the reviews have started coming in, most are favorable. I have an older SR5009 in the living room and am connected up, but still prefer to listen mostly to music in 2 channel. Would be purchasing this for setup in a separate listening area. Not quite ready to pull the trigger yet on this, but soon. Thanks again

The Marantz NR1200 has been my amp for a year. It's been fantastic in connections and sound, at least for me. Actually thought it was 100w per channel until watching this video. And Andrew is spot-on when he described the 'dark' sound. I've compensated by turning the high up 1db (or whatever the UOM is).

D'oh! Seems great! I was looking for this exact product about a year ago, and it didn't exist (lower quality alternatives may have)...and I have a far less elegant solution, and though I'm not ready to sell my stuff and buy this, it's ideal for what I was wanting to do. Getting a new turntable triggered the search. I was going to use an integrated and an HDMI switcher with an optical audio output, but it wouldn't have reduced the number of boxes or the complexity.... Wanted quality 2-channel, plus video switching. I envy those who get this!

The first 3 minutes of this video really explains what has become "Home Theater". Being a home theater company owner, I can tell you the type of systems I install are 80 percent stereo or soundbar configurations. My business had drastically died off compared to the mid 2000s. Everyone is keeping things simple and cleaner for most homes that have open concepts design. I've installed 0 Atmos setups the past year. Unfortunately, smaller setups don't pay the bills. 😣

I've been eyeing this receiver for awhile. Got about half way through this video and orderded one today. I will using a Schitt Mani for my turntable.

I have also more/less gone MC back to stereo. I had been using an Oppo 105D as the processor, but started having problems with it. So I picked up the Marantz sr6013. But I do have a Parasound P7 pre-amp/A21 combo for stereo. And the majority of the time, I'm only using the Parasound gear for TV sound or movies...the stereo system images so well, the surround not playing is never a negative thing.

I’m using my NR1200 as a 2.1 preamp in the same manner I am using a Parasound P6. The Marantz gives up nothing. Sony PS-4750/Shure V15V-MR connected to NR1200 sounds nuanced and full bodied. Airplay sounds spectacular. Overall, very nice. The sub out low pass filter is sufficient to get smooth bass integration.

I own an NR1200 and disagree about the "click" when powering on or off the unit. I like it very much, the loud click gives it a sort of tactile charm that I find satisfying. To each their own!

I assembled a simple living room system for casual music and movies. I needed HDMI switching but no need for surround channels. The 1200 fit the bill and is even doing a good job driving my KEF LS-50 Metas. Got a REL T-5x to round things out and a Bluesound Node for music duties

Thanks, Andrew! I'm passively shopping to update my originally bought 70's Vintage system. I look to you and two other YT channels for component comparison. This review has been of help in knowing what I don't want to spend that much money on despite the input/output support. Building or rebuilding an audio system is a process and takes time as it is a big investment. Your discernment of equipment is very trusted. BTW, my two Chanel, four speaker capable, system has been more than sufficient to accoustically satisfy for home theater sound.

I have been running the NR1200 for about 6 months now and am super happy with it. Up until a week ago I was temporarily using it to power two Power Sound Audio MTM210 speakers and a huge dual 18" Power Sound Audio Sub which had been borrowed from my home theatre for a while. It sounded great. However I moved those speakers back to the theatre when my brand new Bowers & Wilkins 603 S2 anniversary editions arrived this week and I couldn't be happier honestly. Even though the B&W's are a full 10dB less efficient, the 75watts per channel from the NR1200 still seems to be more than enough to drive them with plenty of grunt. The NR1200 has done exactly what it was designed for - a living room hybrid music and TV/Movies controller. Music in our living room is via an AppleTV, with the TV running. We didn't want to overload the living room with subs and 5+ speakers. We wanted a room that looked beautiful and sounded great, while allowing the family to utilise the TV for shows, movies and gaming. The NR1200 controls it all with aplomb. Highly recommended. PS - as for the 'coloured' sound Andrew speaks of. It's certainly got that 'Marantz' smoothness to it, in a similar way to how my Marantz 8805 process does in the theatre. But I wouldn't say it's over pronounced. I believe this is the tonal character people refer to when they say 'Marantz is better for music than Yamaha' - there's just a slight smoothness, airiness and weight to the sound that every so gently removes any potential harshness that could lead to fatigue. I'm not sure whether Marantz actively use DSP to notch certain frequencies, or whether it's purely a side-affect of the components they use - either way it sounds nice to the ear.

Hi Andrew :) Thank you so much for your very high quality reviews - I really enjoy watching them and they have been very helpful. I need a little help here with a few amps that you reviewed - Marantz NR1200, Rotel A11 Tribute and AudioLab A6000. I would like to ask you - in terms of sheer audio quality, which one would you choose? I myself have a very old Rotel ra-01 amp and I love it's lively, spacious, dynamic, detailed and enjoyable sound. I bought a pair of Elac DFR 52 Reference speakers and I am searching for a relatively budget or mid range (price wise) amplifier that would give me the best neutral and detailed, but still lively and exciting sound for the money. Out of those three (or if you have experience with the Rotel A12 or A14), which one would you prefer to listen to? Thank you very much for your help in advance! Best wishes, Petar

Excellent review Andrew!Well this is a surprise,a marantz amp that it is not bright sounding.I have audit in 2018 the PM 6006 with 3 set of speakers (for 2 hours),paradigm titan monitor v6 and Dali zensor 3 and 5 and the sound was bright and totally fatiguing for my taste.Marantz PM series house sound is lively/ bright upper mids and highs and very light bass.That's why i bought the Yamaha A-S 701.I love "dark" sounding amps (normal sounding for me) and speakers because you can listen to music for hours with no fatigue.What about Yamaha r-n803d vs Marantz nr1200 (same price in my country).I also prefer 2.1 home theater set up.

Damn it, you sold me. I have had the SR4023 for forever and have loved it for going on what, 10 years now? I never considered myself a 2-channel enthusiast until hearing you say it but I'm definitely in line with that and you're right, the NR1200 checks all the boxes for my next home theater upgrade. I have some floor Cerwin Vegas that I've loved and will not replace and I do like the physical tone controls on the front whereas the 4023 didn't. That was an 80 watt per channel unit and only losing 5 watts per channel I don't think I'm going to miss much since it's already too loud as it is for my needs, tiny home theater.

Thank you so much for your helpful review. I purchased this model after seeing your review and everything you said is spot on, the amp took the sharp brightness away I was experiencing with my B&W speakers and made for a richer warmer sound and still kept all the details & having Phono input fantastic for the Turntable. Also, so true about when you turn it off - the clunk? So glad you mentioned that (good to know that is normal)

Thats a good detailed review , I bought the Marantz NR 1409 awhile back simply because it was basic cheap and i can turn off as many channels as i want and its not loaded with wifi/bt streamer the more audio you have in one box the more that gets robbed from one power supply and this adds rf inteference causing lower quality sound but for a budgef AVR that you can get for 100.00 bucks US its hard to beat and matches well with Sonys SSCS3 towers warm meets cool basically thanks again

Great review !! This system checks a lot of boxes for me, seriously considering one. Any recommendations for a good turntable match?

I have had this 1200 about a month , and you are exactly right about the sound . It is somewhere, but not there where i would it like be . Behind the wall yes ! Well, it is smooth .

Hi Andrew, Been enjoying all the reviews. I have the wharfdale denton’s and was considering this for my amp. Would that be too much sugar on top of the sugar? Also my tt is the Denon dp400 with the Ortofon blue. Thanks!

Just bought one based a lot on Andrew's review. I couldn't be more pleased. Easy to configure and set up. Worked like it should from the get go. And it sounds great through my Klipsch RP-500 speakers. After figuring out how to do the video pass-through on a Samsung TV, I did a "test" by watching Saving Private Ryan (DVD) and was impressed with the overall dynamics and presence. Will likely get a subwoofer down the road to 'enhance those low frequencies and make them more pronounced than can be reasonably expected from the RP-500s. But that's a personal thing and doesn't degrade from the overall sound spectrum put out by the NR-1200. And playing music via CDs, I sometimes will up the treble by a dB or two to make the cymbals and vocals shine a little more. But again, that's a personal thing ... your mileage may differ. All in all, very pleased with the NR-1200. As for the initial 'click-pop' Andrew mentioned when turning on the unit, it doesn't sound any worse than my 1970s Pioneer SX-737 and I'm not bothered by it. Whatever. Cheers!

Hi Andrew. Thank you for this review! What speakers would pair well with this receiver? Can you provide a few examples in the $500-$1000 and $1000-$2000 ranges?

Great to see you man! I am 2 channel home theater also. Man this is a great looking unit. I have a smaller viewing room, so 2 channel works well for me. I use my system for music more anyway. I am also somewhat of a Marantz freak! Love the subwoofer , and L/R pre-outs. Love that it has HDMI! I love the price tag also.

Hello, question about the pre-out. Will all the Marantz sound colorations and character be there if I connect the XTZ edge a2-300 to the pre-out? Will there also stay the individual settings for inputs (like tone, balance and initial volume) if pre-out is used? Thanks, Petr

I know this is an older video, but I gave it a fresh ‘Like’, because I’m contemplating trying one of these out to compare to my current Pioneer Elite SX-S30 receiver which is configured very similarly (my phono stage sounds terrible, though). Thanks Andrew.

thanks for the review! what would you recommind with a better phono stage but with similar function to this ie 2 channel / connected? thanks!

Hey andrew great review. Quick question if i get the marantz mm7025 power amp to pair with the nr1200 will i be wasting my money or will i notice a difference in sound quality ? I am running a pair of klipsch rp600m and dual svs sb2000 pro subs

I watched a bit of this video thinking 2ch HT is crazy. Now I'm rewatching it because I am considering the Marantz for combining my current Stereo Setup with my HT setup. :)

Does the sub out permit selection of mains crossover or will they continue to get full frequency?

For a unit making claims about streaming and wireless it came as a shock, after purchasing one, to find the bluetooth format is only A2DP and not Apt-X and also that there is quite a lot of lag. Watching streaming videos with the sound coming through the system I have not been able to solve this. There is an audio delay control - to add further lag. But not to take it away.

Hi Andrew Ik have a Marantz sr5005 for some years. I've connected a Project phonoboxS and a AT120 turntable. 2 wharfedale coleridge I bought 25 year ago. I also connected the TV and play the sound on the speakers. So I don't use much of the possibilities of the sr5005. Would the NR1200 give a better result? Question2 Should I upgrade the cartridge AT95E for a ortogon 2M Red of Blue for improved sound?

Hi Andrew Is NR1200 a good pairing with the Technics SL1500? or can you recommend a better HiFi Receiver?

Absolutely fantastic review!

Does the surround sound function help to focus center dialog for use with TV/Movies. This was always an annoyance in 2 channel set ups unless you were right in the sweet spot.

Hi Andrew. I have a question for you. Will this be a good match if not perfect to drive KEF LS50s? Im looking at putting together a system. Please advice.

Hi..what is the best choice and better speaker for this av receiver... thank you

Very interested. In the same boat myself, I’m more of a 2.1 guy but I love big sound. Think this will pair well with a pair of Klipsch r820fs and a 400w 12” powered sub?

So if I had to soften up the character of a Cambridge Audio TT Alva turntable this would work best than Denon DRA-800H?

I own this receiver. It is combined with self made speakers (mivoc units, including mivoc magnetostatic tweeter) . It is very fine sounding, never agressive, good imaging, has all features I want, combines well with my 4k tv screen. I do have a second set with more reveiling electronics but these are way more expensive. For movies and tv the marantz is great. My guess is that a somewhat 'darker' sound is compensated by the small speakers There is relais clicking when turning off and on but nothing wrong with that.

Can I use this first then send the signal to my amp then to my speakers?

So I'm just looking for a stereo receiver that I can run my Marantz MM 7025 2 channel power amp through..... is this the only option..... can't seem to find a lot of options...... I'm running 4 speakers...... I want to run the klipsch 280 f through the amp and I have 2 bose 901...... what are the other options...... I like this receiver just not sure if there where better options

Hi Andrew, if I have a Technics turntable and the Technics SUG-700 amplifier, do I still need the Marantz NR1200 Receiver? Thanks for your advice.

Can this receiver power 4ohm speakers well? I'm moving on from an NAD T747 surround receiver and would like to maintain that level of quality, but in a 2 channel configuration.

Just in the process of looking for a receiver and was so happy to see this review. I am having difficult time to decide between the Marantz NR1200 and the Denon DRA-800H. I am more on the Marantz side for now as it has all the functions that I need and the size is a factor here too. For the speakers i have decided to go for the Q Acoustics 3020i also based on the Andrew's reviews on YT. What got me thinking is that Andrew mentioned in this video that Marantz is on the darker side and could be too much if the speakers are at the same side. I have read somewhere that the 3020i could be slightly on the darker side too. Not sure now if I should go with the Marantz or Denon if it comes to paring with the Q Acoustics 3020i. I have no chance to test this in the shop anywhere so was hoping that someone heard the setup and can help me to decide.

Does the display show track-title, playtime etc. when playing a mp3 flac or something from my NAS?

Nice to see you back.

Hello Andrew, as per your nr1200 review. You seemed reluctant pairing it with certain turntables. Would the rt-85 pair sonically with the nr1200? Thank you.

I just bought this receiver. I love it. How can I add a graphic eq? Can I even add one without a tape 2 monitor?

How does it compare in terms of sound with your vintage pioneer receiver?

Question. Because the NR1200 has 4K HDMI connections (with having to ‘reduce’ surround to 2 channel), does this receiver has to have licensing in order to have these? I was told that the full blown home theater receivers have to have licensing to use the surround modes and visual modes, connections, etc.

Hi. I just bought this. How do you use Alexa? Do I need HEOS speakers? I have Alexa app and HEOS app on my phone. Before buying it, I just assumed you'd speak to the amp itself. Thanks.

Thx for the get back Nice video Cant go wrong with any of the nr s I have a concept 12.0 d receiver sitting on the shelf in the garage if your interested in some old school stereo sound

I have a question. As I'm a 2.1 system enthusiast. Will that sistem be enough for movies? So shall i get integrated amplifier(denon pma-800ne) or an av receiver?

Just picked one up used. It replaces my PM7001 (and an external HDMI switch with audio extractor). I'm quite happy so far. The bass response is not as deep and effortless as my previous amp, neither is the high end as open and detailed. However, since I find my Audiovector speakers lacking a bit of warmth, I actually don't mind this at all.

I’m considering this unit or the Marantz NR1510 in my system, which is currently powered by a Denon AVR-888, which is about 10 years old. I only do 3.1 (no surround speakers) but could easily live with stereo plus the sub. I recently bought the new Apple TV 4K and I cannot the sound from apps processed through the receiver. I’ve tried several configurations, and I simply may not have hit the right combination. But I think just swapping the receiver for the Marantz 1200 might save time, frustration and space, plus be a sonic upgrade. My only concern is whether eARC, which the NR1200 does not have but the 1510 does have would be helpful or even required with a 4K UHD TV.

Can you connect a graphic equalizer to the marantz nr1200 along with a subwoofer?

How does this fair against the CXA81 and I saw your review on the 81 but you only mentioned versatility, I would like to now how’s the sound quality comparison? Thank you, great review.

I am not into surround sound, I am a 2ch man, my setup for movies & tv shows is simple. I run optical cable from the tv into my Audiolab M DAC + which is a Preamp & DAC, then run Balanced cables from the Audiolab M DAC + into the back of my Adams Audio T5V Active monitors , use the Audiolab M DAC + to control the Volume of the Adams Audio T5V Active Monitors. Streaming videos from Netflix sounds Great , nice and clear dialogue with plenty of Bass for impact from movies & tv shows

Andrew, I am looking for a amplifier for a pair of Kef Q300, do you think this amp would pair well ? I am also considering the Denon DRA 800 H. Also, are there any good hi-fi stores left in Austin ?

Thanks for this review...i also dilly dally in HT, but my heart is in stereo still I don’t always listen to just pure 2 ch audio moreso when i am in front of the tv. Looking to integerate some ML ESL (maybe ESL X) so these are very low on power for them.

Hi, new subscriber here, was wondering if I could ask for advice please. Been using the Marantz ud7007 player for a few years now and currently looking to pair it with the new Acoustic Energy active AE1 via balanced xlrs and my concern is with the volume control - I wish to have a remote control so would I have to get a preamp to do so? What are my options? Cheers

I love the Pure Direct feature on my Marantz AV7005 pre-processor. Very clean sound

While I do have a large HT room I have also been a 2 channel guy all my life. As a matter of fact right now I'm listening two my 2 new Martin Logan (ML) 15i speakers through my 1987 vintage Sony GX10 ES 150 watts per/channel and 330 W into 4 ohm speakers, such as the ML. The Sony is all analog and while I did try external DAC I wound preferring the analog sound. Thanks for the Marantz review and I'm about to purchase it in case I want a newer stereo receiver.

I have a project espirit turntable and jbl speakers which are punchy. Looking to upgrade my receiver from a Sony dh190. Think that a richer receiver/amp might make everything richer and balanced? Also phono stage is the most is what I’ll be using in this setup. Any thoughts on a different integrated or receiver that might help me? Thank you loved the video.

I just ordered this and matching them up to cerwin Vega sl15. My first system in 15 years. Can’t wait.

Thanks Andrew! I’ve been waiting for this review. You provided me with exactly what I needed to know. I’ll be purchasing it 👍 P.S. hope you feel better 😎

Can i pair these nr1200 with a monitor audio bronze 1 wired and 2 speakers heos 1 with the heos app?

I've just bought the NR1200 and Dali Oberon 5, what do you think about this pack? Will they work good together? I'm really looking fordward to try them :)

Does this single unit Marntz NR1200 makes great audio experience or need additional DAC or powe amp. Pl reply

Is this unit actually any good regarding phono or Bluetooth/Spotify streaming? Not really bothered about the video elements.. I'm thinking this for its overall features, or the Cambridge axr100 or Rotel a11 tribute? Would you say the sound on this is good enough or is there a definite sonic difference compared to the Cambridge or rotel, my only concern with the Cambridge being the BT is only sbc.... advice would be much appreciated

I'm interested! Do you think I could add a project tube box ds2 preamp with a Technics sl 1800 mk2

Is there any stereo receiver such as this one with DRC which you could actually use as a home theater system with 2 speakers?

I was at my local Richersound store here in Belfast, Northern Ireland. I listened to both NR1200 and the mc-r612 and i was advised the latter for mostly listening to music. The former is better for watching movies.

Hi. I own a Rega Planar 3 turntable. Do you think this Marantz phono stage is a good match? Currently I own a Cambridge SR10 + Monitor audio bronze 2, but I am considering upgrading it.

Would this pair well and drive Monitor Audio Silver 300 / 500 7G ? or would it be underpowered ?

Hi Andrew, is Marantz NR1200 good to pair with Klipsch RP-600M? How’s the sound for the music? And how’s the ‘speeches’ on the movies? I am a beginner and I am planning to pair these both. Music source & movie source mainly Apple Music & Netflix/Disney+ through Apple TV 4K. Thanks.

Hello Andrew, your microphone sounds incredible ! May i ask which mic you are using ?

hello andrew i loved your review on heresy mark IV ...i am really interested in this speaker for use as a center....currently my front L &R are klipsch la scala ii that i was able to get new last year....but i cannot afford a 3rd la scala for the center......my question is ...do you think the Heresy IV would fit the bill....i read that the heresy originally was designed to be a center for the klipschorn and la scala.. my other surrounds are 2 klipsch rs52 side surrounds 2 klipsch rf-7 iiis and 2 SVS PBULTRA 13.5 for my subs.... my power amp is an outlaw 7220 7ch amp my processor is marantz av-7705 i thank you for alll your help and im a life long fan of the klipsch sensitivity ....ur so right..i would never go back to a NON HORN POWER HUNGRY SPEAKER . i got the outlaw 7220 for headroom pretty awesome amp owned by ati 220w per channel all channels driven ... any way let me know what you think as the heresy as a center for my la scalas L & R

Hi i am planning to buy this , will it be enough to drive my jbl l166 big speakers? Just wanted to confirm , please let me know

Hi Andrew, I saw your post on the NR 1200. Do you have any idea how the Marantz will sound with a Technics SL1200, ortofon concorde pickup? I use aluminum Canton Chrono SL 520 speakers, do you have any idea how that will sound? Thank you very much. Best regards Pete

Need help with this nr1200. Spoke with both crutchfield and marantz. Headphone Jack is a problem. Sonymdrz110nc hp works great with unit. Cheap but good hp. Tried Philips shp9500 32 ohm and dt 770 250 ohm headphones failed. Sony hp 35 to 45 on unit volume loud. 9500 and 770 have to set volume at 65 plus to achieve same results. What's up with that. Both 9500 and 770 worked great on a 30 year plus pioneer vsx-455 headphone Jack. No adjustment needed. 32 or 250 ohm. Can you recommend a great pair of cans for marantz nr1200 for the units headphone Jack? Volume btwn no more than 45. The sony nc switch off is 45 ohm, nc switch on 220 ohm. Marantz doesn't know why this is happening. Please advise. Signed confused.

Regarding the discussion of the NR1200's richer darker signature and system matching. I kept looking over Andrew's shoulder at the JBL L100's and their 12" woofers. On speakers with 5" - 6" woofers more typical of 2019 almost 2020 my guess is that sonic signature will be less of an issue and actually a plus.

Do tone controls work in the zone 2 set up to another amp? I read by an owner/reviewer it does not with the Denon zone 2.

I just set up a new Onkyo receiver, it has a button right above the power button that says “pure sound”. After going through the complete set up I put on some music and pushed that button I was blown away by the pure soundstage in front of me. I haven’t had a home theater in over two years. We just now moved into our new house from our old one being destroyed by hurricane Harvey. It was almost like a whole new experience.

Any thought on this for a first generation Klipsch Fortes? Enough power?

So does this decode multichannel audio to 2.1? If it does then it's what I've been looking for. I Don't need 5.1 or above, for me it's just waste of money and space to fill the room with speakers. I just want great sounding left and right speakers which produce good enough pfantom center and a sub which handles LFE track. That will give enough home theater experience for the price for my taste.

Great review, thank you. I love the size and specs of the unit and will likely pull the trigger once they become available again in this Covid-ravaged electronics world. I'm know I'm in the minority, but I listen to FM radio quite a bit. Do you have an opinion on the built-in tuner?

Could this work with B&W 606? since it has a warmer ouput I could say. I just saw your review about the 606 and it was not that well. Thank you!

Hi, a bit of advice if I could? I've seen this on offer for £300, how would this compare to Cambridge Axr100 (refurb £250), and Rotel A11 tribute (refurb £300)? I'll be using mainly BT, cd and occasionally phono. I was thinking the Cambridge as I'll use BT, but see that's only sbc. Any advice appreciated. Ooh, I'll be running Paradigm monitor 5 floorstanders.. they're 15-100w so assume all 3 would run them comfortably? Thanks

Hi Andrew i just wanna know if this amp is builtin bluetooth headfone amp, i just wanna buy this first i wanna know this , That can i connect my bose qc 35 to this amp via bluetooth thanks for...

How Can add Zone 2 speakers ? Do i need external Amp to power them up? please help Thanks.

Even many soundbars around this price have auto-calibration. This is on some great sales right now while stocks last, and rewatching this now is giving me some ideas for matching with the Polk XT60s. Two channel seems neat. But isn't there any virtual enhancements? And how does it perform being on for most of the day every day?

I have started from scratch. Now have this pared with Polk xt15 and my old onkyo which has been given back to me is repurposed as a sub. With the small (but good, if old) speakers sitting as Bs. The TV is a hisense but this is all under 1k and its enjoyable. The amp will outlast a few tvs im certain. The speakers will be first to be upgraded though. Certainly glad of the sub.

What have the better sound between this nr1200 and the pioneer sx-s30?