Marine gas tank repair with permatex no. 2.
Рет қаралды 4,241
2 жыл бұрынVideo Merge
@benburwick3403 Жыл бұрын
I'm curious how this turned out. I hope it worked great but I'm feeling a little squinty-eyed. There's a similar product, Permatex Permashield, that specifically indicates "fuel resistant", which I don't see for Type 2. The fact that Type 2 cleans up with alcohol makes me wonder how it fares with gasoline.
@chic0sanchez Жыл бұрын
The instructions say to let the paste sit until it gets tacky. Not sure how tacky or how long it takes to get tacky but was hoping that issue would be mentioned. Glad it worked out for you!
@kencleg7721 4 ай бұрын
5 min
@chickenfoundation9323 Жыл бұрын
How is it holding up?
@PCAPastorTrav Жыл бұрын
Could you send the bubbles out of the window like you can do with headlight lenses?
@TheMightyBluegill Жыл бұрын
That was what I originally thought I could do. Once I disassembled it I realized that the bubbles were throughout the plastic. Meaning that none were on the outside or inside but all through the middle. Not sure if it was manufactured before taking ethanol into account or just an overall flaw.
@jamesbrightsman6548 Жыл бұрын
How’s it holding up
@cfmechanic 8 ай бұрын
A torch or hear gun should make plastic clear again
@kencleg7721 4 ай бұрын
Boil the plastic re regain its original form
@cfmechanic 8 ай бұрын
Dif this fix last or how long till it failed
@TheMightyBluegill 15 күн бұрын
I used it a couple of times and then retired it in my shed because I got a new motor that came with a Honda gas tank.
@crappienaterfishing1198 2 жыл бұрын
Fixing a plastic gas tank,Why?
@TheMightyBluegill 2 жыл бұрын
Tank itself is in great condition. Leaking around the sending unit. Would rather not have to buy an entire new tank.
@kencleg7721 4 ай бұрын
Why buy new it’s all crap the new shit junk
Adam Savage’s Tested
Рет қаралды 1,1 МЛН
REJU KOT
Рет қаралды 1,7 МЛН
REJU KOT
Рет қаралды 1,7 МЛН
Sadika Qanbar
Рет қаралды 4,2 МЛН