How To Replace The Ford Front Grill Logo Emblem On A 2011-2014 Ford Edge

Рет қаралды 91,373

Martin's Used Cars & Collectibles LLC

3 жыл бұрын

This video demonstrates how to remove and replace your 'Ford' front grill logo emblem on a 2011-2014 Ford Edge. Here is a link to purchase a new 'Ford' front emblem:amzn.to/3GTO3Eu
Tools needed are: 10mm socket, ratchet & extension, and a Phillips head screwdriver.
Hope this video helps! Please leave a "like" and subscribe to our channel for more videos!
Website: www.martinsusedcarshickory.com
Facebook: / martinsusedcarsllc
DISCLAIMER: WE MAKE NO WARRANTIES, RESPONSIBILITY OR LIABILITY, EXPRESS, IMPLIED OR OTHERWISE, REGARDING THE ACCURACY, COMPLETENESS OR PERFORMANCE OF THIS VIDEO. ALL VIEWS EXPRESSED IN THIS VIDEO ARE OUR OWN AND DOES NOT GUARANTEE RESULTS. ANY ACTION YOU MAKE FROM THE INFORMATION IN THIS VIDEO IS STRICTLY AT YOUR OWN RISK.

Пікірлер: 56

@mikhailkhramov4955 2 жыл бұрын

Very concise and to the point instructions; I wish all auto repair videos were like this: all the information you need and no fluff. It took me 20 min to replace a completely faded front logo on my 2013 Ford Edge. The hardest part was to push down the clips on the old base+emblem and pull it out, but even that wasn't that difficult. Talking about tools, you also need a smaller socket to unscrew the old emblem from its base and screw the new one onto it (I did not write down the size). The link to Amazon the author posted does not work anymore, but the only thing you need to know it is 9"X3.5" Oval Badge Name Plate. Thank you, Martin! You save a lot of time and frustration for hundreds of people like me!

@cubeinside 2 жыл бұрын

Worked! Actually you don't have to take the top part off. If you have a long enough tool you can just push down on the emblem tabs. Thanks!

@louysejubinville2988 10 ай бұрын

Like the way he explained how easy itwas to replace the logo. thank you!

@phillipborrelli838 Жыл бұрын

Thank you for making this, it took the mystery out of changing the emblem. Mine had the two sheet metal nuts holding the whole assembly to the grille, I had to remove them before the emblem AND bezel could come out. After taking those nuts out, the emblem pulled off while the bezel was still clipped in place in the grille. Not sure why mine was different. Thanks again, and keep the great videos coming!

@losteaglescout 12 күн бұрын

Mine too. 3/14 build, 2014 Edge LTD AWD.

@davidsalmons5606 3 жыл бұрын

Quite simply an outstanding video and just what I needed to see. Now I can go out and replace the emblem on my wife's 2011 Edge. Thanks so much for taking the time to share your knowledge with others.

@JRJones333 3 жыл бұрын

Getting the top clip to snap back in is a bear. Took me a while. I thought I was going to have to remove the whole grill, but I just kept pushing until I got it. You wouldn't think this project would be that difficult.

@Samantha053 2 жыл бұрын

Thank you so much for this video! Precise and to the point! Really appreciate it!

@TheFlyingFish692 3 жыл бұрын

By far the best one of these types of videos. Thank you!

@renelandry9573 Жыл бұрын

Very easy video to follow. Thanks so much!

@Kellys_kitten_squad 3 ай бұрын

Thanks will be doing this soon. They all ware out and look faded.

@adambgunn Жыл бұрын

Thanks for this. I just ordered a new black front emblem for my 2013 edge sport.. I used a carbon fiber wrap on the rear one which came out nice and I did the front too but it didn't look right so just replacing the whole thing. Great helpful video. Subbing.

@jcara17 Жыл бұрын

Great video! I replaced the emblem on a 2012 Ford Edge. It is not easy to release both tabs. When one is released, the opposite clip becomes jammed from the shift in position. It is important to release one clip and push it out as little as possible. Only then will the other clip release. Pushing out both tabs at the same time would be ideal but getting two hands behind the grill was not possible. Thanks for sharing this information.

@m-a-pesca-esportiva 3 жыл бұрын

nice my brother,I'm learning a lot from your videos, I have an EDGE too.

@centexsucks1 2 жыл бұрын

This is such a great video thanks so much for taking the time to make this!! New sub here.

@bengreenwood7387 Жыл бұрын

Awesome video. Thanks for doing this. Unfortunately my last plastic trim screw was stripped to hell and back !

@michelle2751 3 жыл бұрын

We made it! Thanks for this video

@snyderman001 2 жыл бұрын

My wife surprised me with a used one 3 years ago and the dealership wanted to charge $130.00 to replace it. Well, it' Robert Hutson; par for the course. Great video; thanks.

@alexoviedo5401 3 жыл бұрын

Excelente muy practico..

@HtownKurt Жыл бұрын

Great video thanks

@ErnestoGarza-xu1qk Жыл бұрын

Muchas gracias! Thankyou very much

@Cutesyowl 3 жыл бұрын

Thank you for his video. The sticker actually just fell off from my car. So this video is very helpful.

@georgegretser2178 2 жыл бұрын

Same the sticker just peeled off and fell to the ground.

@MrHARLEMBRONX 3 жыл бұрын

Love this I want to do mines

@josepablojimenez2096 Жыл бұрын

Great video ! Very concise , by the way, what is the measure of the emblem? I need to replace the emblem of my car and I’m not sure about the measure .

@boharris5586 Жыл бұрын

On my 2014 Edge SEL, you have to take the black thin nuts off the replacement blue oval first. It secures the whole assembly to the grill. Do not follow these instructions for the 2014. I almost broke the tabs off the assembly trying to get it out. The replacement blue oval will not fit back in the outer oval flush if you put the thin nuts on and try and put it back on the grill.

@halsmith3771 3 ай бұрын

Same thing on our 2014 Edge LIMITED. I fought for an hour trying to push the tabs from the inside of the grill with NO LUCK! Once I took a 10mm deep well socket to remove the black nuts from the back of the assembly, not only did the FORD LOGO pull off easily, the metal tabs were easy to gain access. I actually lifted the backplate and it slid right out. When re-installing back into the grill I concentrated my efforts on securing the TOP tab FIRST, then the bottom two. The thing snapped right in. ***If it wasn’t for reading YOUR COMMENT on this video in the threads below, I wouldn’t have been able to GIT R DONE*** FYI, I’d like to see ANYONE “just simply push” the locking tabs down with fingertip strength and pop the back plate loose……

@michaelnielsen7297 9 күн бұрын

Yep same here. I snapped my tab before I took to the comments and saw this

@crash9632 3 жыл бұрын

Getting ready to do mine. Such a shame Ford puts Junk emblems on in the first place

@belatoth1446 2 ай бұрын

Ford should offer a free replacement for their junk logo!

@misternobody8332 Жыл бұрын

Same as to do on Ford everest 2013 Tdci. 👍

@jeremyzackandlucas 2 жыл бұрын

*I have a 2013 Ford edge SEL AWD and apparently those emblems are a manufactured defect. It seems like almost every edge I see the emblem is faded. It's so annoying because the rest of the car looks so good!*

@69sexyladycat Жыл бұрын

Do you have the video to replace the actual grille?

@sethdawg 3 ай бұрын

Anyone know the size of the logo needed for e350 superduty 2009?

@michaelpowers3445 2 жыл бұрын

Somehow my 2013 design is different. The part that is removed here is actually attached to the rest if the plastic grill with the nuts on the back of the emblem. And they will not remove by trying to loosen them. Somehow two hands needed behind grill to get under the nut to give back pressure while trying to loosen.

@kwb377 2 жыл бұрын

Just replaced the emblem on my 2013...it was just like the video.

@timothyrose4052 Жыл бұрын

Mine was different as well. Had to remove the nuts from the back of the grille to remove the entire assembly from the grille.

@centexsucks1 2 жыл бұрын

The link for the emblem isnt working?? Do you have the full link?? Thanks

@MartinsUsedCarsCollectiblesLLC 2 жыл бұрын

Try this link: www.amazon.com/Tailgate-Replacement-Nameplate-2004-2014-2005-2007/dp/B09DPPVF92/ref=mp_s_a_1_5?crid=3IL57X0ATQURM&dchild=1&keywords=ford+emblem+front+grill&qid=1633954356&sprefix=ford+em&sr=8-5

@eddiejendraszewski5798 3 жыл бұрын

Do you have to take the whole top off to get to the plate

@MartinsUsedCarsCollectiblesLLC 3 жыл бұрын

We took the screws out the top plate so my hand could squeeze in there, having the screws off allows the bumper to flex a little bit more.

@eddiejendraszewski5798 3 жыл бұрын

@@MartinsUsedCarsCollectiblesLLC thanks

@brasshead4177 3 жыл бұрын

The 2 10mm speed nuts on 2014 edge must be removed before removal of emblem,they hold the emblem to the grill

@TheDoozie43 2 жыл бұрын

@@brasshead4177 I was wondering about that, tried for an hour to get mine off today this way lol. Thanks for the confirmation!!

@willmarj 2 жыл бұрын

Part link doesn’t work

@MartinsUsedCarsCollectiblesLLC 2 жыл бұрын

Here is a new link to a logo: amzn.to/3GTO3Eu

@dborg56 2 жыл бұрын

Shouldn’t Ford replace them for free. It is their brand logo that’s defaced.

@angelbyallmeans8154 4 ай бұрын

$53.97 just for the part..

@youwereprettylasttimeisawy1227 6 күн бұрын

@@angelbyallmeans8154you got scammed, i got mines for $20 from ebay

@thefragrancecritic9136 3 жыл бұрын

It’s a shame that Ford is using such a cheap logo that needs to be replaced after on 5-10 years.

@chrismurray3390 Жыл бұрын

yes really ashamed when your company logo can't even hold up.

@gpilsitz1783 Жыл бұрын

Mine peeled off in a Car Wash.😡

@godovermoney1124 2 жыл бұрын

Not as easy as it looks. My 2014 was different then what I see in this video

@charliemclean2767 2 жыл бұрын

What was different? I have to change a 2014?

@georgewarren7381 2 жыл бұрын

Awesome video. I replaced the front emblem on my wife's Ford Edge 2013. Getting the two clips to let loose was the hardest part. Got it off, cleaned surface off, place new emblem on and lightly tightened the emblem back plate. I went ahead and replaced upper trim bolts and pop up screws then pushed on emblem to get clips to engage. Video was well done.

@MartinsUsedCarsCollectiblesLLC 2 жыл бұрын

Thank you. Glad it worked well for you.