Mass Loaded Vinyl For Soundproofing / All the MLV Facts!

No video

Mass Loaded Vinyl For Soundproofing / All the MLV Facts!

Рет қаралды 489,462

Күн бұрын

If you ever had any questions regarding Mass Loaded Vinyl for Soundproofing then this video is for you! I will be answering everything you need to know about MLV!
Mass Loaded Vinyl or MLV is a special soundproofing material that is designed with the primary purpose of serving as a sound barrier.
Here are some of the questions I will answer regarding Mass Loaded Vinyl;
1.What is Mass Loaded Vinyl?
2. Is Mass Loaded Vinyl Safe?
3. Is Mass Loaded Vinyl Flammable?
4. Can You Paint Mass Loaded Vinyl?
5. Uses of Mass Loaded Vinyl?
6. Soundproofing Existing Walls with Mass Loaded Vinyl
7. Soundproofing Ceilings or Floors with MLV
8. Types of Mass Loaded Vinyl
9. Mass Loaded Vinyl’s Advantages and Disadvantages
10. Mass Loaded Vinyl Alternatives for Sound proofing
11. Where to Buy MLV
You can also check out our full article about MLV on our website.
soundproofguide.com/mass-load...
Recommended MLV from Amazon - amzn.to/2GEhJth
Other recommended Soundproofing Products; These are all Affiliate links. These links helps me
- Noico 80 mil Sound deadening mat - amzn.to/2ISNdO1
- NICETOWN Sound Reduction Curtains - amzn.to/2VmESbR
- Acousti Coat - Sound Deadening Paint - amzn.to/2DIFNcX
- Green Glue Noise Proofing Sealant - amzn.to/2IUK4xi
- Green Glue Noise Proofing Compound. - amzn.to/2Vswsje
Thank You for watching and please don't forget to Subscribe.
Bear in mind that some of the links in this video are affiliate links, and if you go through them to make a purchase, I will earn a commission. Keep in mind that I link these companies and their products because of their quality and not because of the commission I receive from your purchases. The decision is yours, and whether or not you decide to buy something is completely up to you.
Visit our website for many more soundproofing guide; soundproofguide.com

Пікірлер: 389

@soundproofguide Жыл бұрын

Watch the UPDATED VIDEO Feb 2023 - kzfaq.info/get/bejne/sN9ghpdokqzFlI0.html

@TheRpapito 3 жыл бұрын

One major disadvantage you failed to talk about is how labor intensive it is to install on walls and ceilings. They are usually sold in 25 foot rolls. Try hanging MLV by yourself on a wall or ceiling. You will need a crew to do this. I had two people have to help me to do this. However- it did block sound incredibly when done.

@soundproofguide 3 жыл бұрын

You make a very good point! This stuff is certainly heavy! Thanks.

@pettytheft79 3 жыл бұрын

I installed this on my small bathroom ceiling by myself. Don't ask me how I did it, but I would never do it again. The amount of staples to keep it in place was crazy. The rest of the house won't have this on the ceiling.

@davidwhumke3406 2 жыл бұрын

@@soundproofguide if I have a finished ceiling and don’t want to take it down, would I get benefit in reducing foot step noise from adding a layer of mlv and another 5/8” drywall layer? Would that be better than adding green glue and another 5/8” drywall layer? I’m fine with some noise, but just want it reduced so I don’t know exactly where my neighbor is at upstairs while in my bedroom

@malinoisnation9392 2 жыл бұрын

Could I rent a drywall lift?

@vinylrules4838 Жыл бұрын

@@davidwhumke3406 Green Glue is a waste of money. If you want something between the layers of sheetrock, use carpet adhesive. Way cheaper and stays elastic over time.

@SamFisherman59 4 жыл бұрын

Thank you for sharing all these usual techniques with us

@soundproofguide 4 жыл бұрын

All the recommended soundproofing products I talk about in this video can be found in the description of this video. Don't forget to SHARE, LIKE, COMMENT, and SUBSCRIBE. Doing this really helps small channels like mine to have a chance on KZfaq. Thank you!

@KarlGutowski 4 жыл бұрын

Listening to the loudness of the audio of popular channels and asking yourself if your audio is loud enough, then setting your audio levels comparably helps small channels like yours to have a chance on KZfaq.

@peanutbutter1998 4 жыл бұрын

Soundproof Guide Does the soundsulate mlv (the one you’re recommending ) have any bad odors? I’ve heard that MLV smells terrible and people cannot have it in their rooms and stuff. I haven’t seen any bad reviews on the soundsulate MLV but if you have any experience with them, please tell me how bad they smell or if they even have any odor at all.

@JillofAllTrades2 3 жыл бұрын

@@peanutbutter1998 Check out the info at 10:40

@N2147B 3 жыл бұрын

Is MLV good to cover up noise coming from fitness classes upstairs? I have an exposed ceiling so I want to rid the noise.

@elduderino1329 4 жыл бұрын

It is very important to be on your phone while you are painting MLV.

@actual6837 3 жыл бұрын

The transmission frequency of the phone call is essential in helping the paint adhere to the MLV surface

@PlanetMojo 4 жыл бұрын

We used this all over the place on the yachts we built at Burger Boat Company. It was built into the plywood for the walls and floors, but the entire room was also decoupled from the frame, floating on Regufoam and insulated with Roxul. Insanely expensive, but the rooms came out very quiet.

@soundproofguide 4 жыл бұрын

That’s awesome! Thanks for sharing!

@abc-ed1nr Жыл бұрын

How do you install it? Doesn’t it have to be limp and allowed to move?

@PlanetMojo Жыл бұрын

@@abc-ed1nr It was sandwiched between two layers of plywood.

@MartinLopez-ys5dm 4 жыл бұрын

Can you use it as an engine cover insulator with 10'' of clearance from exhaust manifolds?

@allisonrossiter8319 2 жыл бұрын

Also, regarding floors, is there something you can put down before cement board for tiling to help with sound? Could you lay MLV over the flooring planks (1950’s house)? I’ve already put cement board down on the floor above where we’re going to do the ceiling so would be too late for MLV there. Is there something else that might help over the concrete board before tiling? We couldn’t put concrete board under the acrylic bathtub. Would laying rock wool over that part help at all? Or mlv? One of your videos said that any gap will mess up most of what you doing for the sound dampening, so I feel like the whole thing will be wasted because essentially there are open holes in the floor planks underneath the bath tub over the other room where we will be doing things in the ceiling.

@oscarhollywood 4 жыл бұрын

Hi, how would one Sound proof a ceiling that has an air conditioning vent? It has to remain, but how to block sound that could come in through the roof and through the air-con ducting through the vent and into the room?

@dominicyin2993 4 жыл бұрын

I need to soundproof 50 sqm of the commercial ceiling to reduce the noise of passing planes near the airport, with wire meshed insulation over the metal beams, shall I use your mass loaded vinyl to cover extruded metal beams or just under insulation underneath? Any self-adhesive version in Australia?

@ReAnnRing Жыл бұрын

I really appreciate this video ... and the uses of it. Been looking for a great source for soundproofing for a townhouse wall for my living room and bedroom. It looks thin enough and do-able and I LOVE you don't have to tear out a wall to use it! Wooohoo. Thank you for the review!

@soundproofguide Жыл бұрын

Thank you! Check out the updated video. Link pinned in the comments. :)

@user-hl4jj3hb4h 8 ай бұрын

You may need to reinforce your walls, however. It's very heavy!

@kscollin1 4 жыл бұрын

Question for the group... need to retro fit a walk in closet to make it a sound booth... I'm currently using Sound Blankets which are great for treating my sound...but not keeping sound out... My thought was to put down a layer of MLV...(Walls, Ceiling and floor) put up furring strips and put another layer of MLV down... then put a thin layer of plywood so I don't lose room space.... Do I need the two layers or would 1 layer do a pretty good job? Trying to reduce the outside noise from coming in... mainly neighbors and cars driving by. Thanks

@jorgenieves558 3 жыл бұрын

Can MLV work with wall paneling? Or would you recommend MLV with 5/8 sheet rock than the paneling ?

@martin8401 2 жыл бұрын

I’m sound proofing an existing wall between my bedroom & roommates but have around 1.25” of available space before hitting the trim for the door. I also want to finish the wall with shiplap. Where would you recommend I put MLV? : - existing wall - Green glue - 5/8 fire resistant drywall - Green glue - Shiplap

@ull893 3 жыл бұрын

The Best channel on the subject. Thank you.

@karasherk47 3 жыл бұрын

Very helpful video! Thank you.

@MyFatherLoves 4 жыл бұрын

Easy on saying that MLV “soundproofs” your room. If your walls are directly screwed into the studs, A LOT of low-mids and bass will transfer through the wall, through the studs, into the adjacent wall, and into the next room. The last thing generally overlooked in soundproofing is the necessity of decoupling your wall to the adjacent wall. Otherwise, most of the low-mids and bass WILL transfer out of the room and effectively put a cap on how loud you can run your low-mids and bass without getting the cops called 😊.

@kitcarson6806 4 жыл бұрын

Didn't he address this at 9:37?

@MyFatherLoves 4 жыл бұрын

Kit Carson he did mention it for sure but my comment was about saying that MLV sound proofs a room. It definitely does not do that. It helps for sure and the video has a lot of good info in it. But it does not sound proof a room.

@ColtraneTaylor 4 жыл бұрын

In other words anytime MLV is mentioned also add Decoupling. Decoupling, Decoupling, Decoupling!

@WesternIronwoks 4 жыл бұрын

there is no such thing as sound proofing but thats the word that is commonly used for sound reduction. before you say anything try soundproofing against a bomb,you cant without distance haha.

@laundrysauce234 3 жыл бұрын

Fuck it, im still gonna order a few yards of this shit and make some frames to mount it to and just place it next to my walls. I love living in an apartment where i can hear my neighbors literally talking not even yelling

@RoboKat007 3 жыл бұрын

Great Video! Curious.. If I install MLV but then also paint it will the Acoustic Coat Paint would that help alot more to reduce sound transfer or should I not spend the money? Maybe also use Green glue at as well? I want to put MLV on the hardwood floor (1910 building) and then cover it with a laminate floor. I'd assume I'd also need to use an underlayment just under the laminate floor as well? Any suggestions for that? Thx!

@familybikeride 2 жыл бұрын

Can you create a fantastically sound reducing assembly with MLV stapled to studs, then resilient channels or sound insulation slips, then 5/8 quiet rock?

@ltgsebg 3 жыл бұрын

Does anyone know the performance of this material versus cork, for a floor sound insulation application?

@nore8141 4 жыл бұрын

Great video and commentary thanks

@davidpatrick7630 3 жыл бұрын

Need to soundproof against 4 types of noises from my neighbor in nice bachelor apt in heritage building. Her voice is 1, her chair drags on solid wall to wall porcelain tiles ( or objects when dropped and rattle).her heavy thud heel to floor rapid stepping ( each step like a 5 pound rubber mallet to 1 inch steel boat hull) and finally her steel door in steel.door box slams. I need to cover 350 to 380 square feet of shared wall. If spend that much...will it solve these noise issues? Can't do anything in her place, but if puts her carpet down would help some...but not much.

@abdullahalahmadi695 2 жыл бұрын

DOES MLV ignite at 50 c that is around 110 F. In summer some times reaches that but it is around 40 c for the whole summer is there a chance MLV ignites I am planning to use on a flat roof which I use it a a deck and it is in the last story of my building

@patrickwoods2583 2 жыл бұрын

I know it's kind of like an infomercial, but I really enjoyed that! I would get/use this.

@EverlastingEclipses 4 жыл бұрын

So can i put mlv on my bedroom wall and call it a day? no hazard? I don't have to put another layer on top of mlv right?

@Texasbird026 Жыл бұрын

Great video. I am contemplating using on garage door that faces street. I am wondering how heavy it is and if it will put a strain on my auto garage opener motor and brackets that support the door.

@rubyg8389 3 жыл бұрын

Is it possible to apply this directly onto an existing wall if you're unable to build a fake wall? I dont have the room to do this you see so I was thinking of putting this onto the wall and then putting noise muting panels over it?

@rachelrae5277 4 жыл бұрын

As an FYI MLV can be digitally printed to any finish you wish. You would need to talk to specialty acoustics providers for this though, Home Depot wont have this option. I would strongly suggest this over painting. For those worried about fire rating, any MLV I have come across is rated under E84.

@pwruser07 4 жыл бұрын

MLV by itself is not fire rated. The product can be Class A E84 fire rated when it has a foil facing on it.

@jbo5021 Жыл бұрын

interesting, do you have a company you suggest? and when you say you can choose a finish are you referring to color, design, texture?

@rachelrae5277 Жыл бұрын

@@jbo5021 colour or print, not texture. There is a company out of New Jersey that offers this - E squared. I assume only large quantity orders though.

@olivier3747 2 жыл бұрын

Can I install MLV behind a fence, to reduce the noise from a pump pool on the other side of the fence? Would that be effective?

@Aamerikram 4 жыл бұрын

It can be used externally? Can this be used to reduce the air conditioner noise level?

@yankshusband 2 жыл бұрын

Can this be installed to soil pipes with p-traps and clean outs? And will it deafen the noise from toilet flushing, considering that there is no ceiling installed in the floor below?

@DecibelStudiosLA 3 жыл бұрын

Will you say resilient channels with mass loaded vinyl in between two pieces of drywall is better than double wall for soundproofing? The each wall in the double wall will have safe and sound insulation and double drywall with green glue in between them. Please help lol

@MrMartinoBranding 3 жыл бұрын

Thank you for this! Do you know if it would be ok to apply this vinyl on a door? I dare say staple it?

@KarlGutowski 4 жыл бұрын

Does MLV absorb gain from your microphone pre-amp and make all recordings obnoxiously quiet?

@dianaangel1129 2 жыл бұрын

I have a wood fence that the bad side is facing me. Can I cut the vinyl in widths, weave it in under the poles holding up the fence and staple it in between the boards that are vertical instead of placing it over the entire fence?

@MountainwoodCottages Жыл бұрын

We are insulating a Caboose that is close to a state highway. Framing the caboose, placing fiberglass insulation then wrapping with soundsulate then nailing wood planks. Is this going to help with the external noise? ALso, can it be used on the floors as a underlayment beneath thick LVP?

@korinemlbernard3256 3 жыл бұрын

Great advice !!! Thanks for a comprehensive and excellent video on MLV. I was looking for exactly this information and am overjoyed. It's 7 minutes after midnight and I am sadly on my 4th sleepless night due to noisy neighbours. Bless you 🙏🏾👍🏾❤️🇨🇦

@DrakeSteve 4 жыл бұрын

The one thing this video doesn't cover is the frequency range for sound reducing that MLV performs. The other thing is the STC class the narrator mentions is that it is limited to frequencies between 125 Hz.- 4000 Hz. The most difficult vibrations to block sound transmission from are low frequencies-- the lower the frequency, the more difficult it is to prevent sound transmission.

@SteveNeighbor 2 жыл бұрын

Great comment - with more actual information than this entire "video"

@mariano_353 2 жыл бұрын

Seems you know what you're talking about. Will this block the sound from a table saw from being heard outside of the workshop. Brick walls. Foam injected steel door. Only one small window with double glass with air chamber. Thank you!

@olinhu 2 жыл бұрын

Hi, I am looking to build a drum studio, and will include MLV for soundproofing. A question I have is to where to place the MLV? Wall --> MLV --> Rockwool --> Plasterboard Wall --> Rockwool --> MLV --> Plasterboard thanks

@jean-francoisbernier5250 2 жыл бұрын

hello.... 1- can MLV be used on lighttly uneven floors (ie does it forgive say 1/8 -1/4 spaces...) instead of having to poor floor levers products... 2- do you need to put MLV under kitchen cabinets to prevent "noise" from main floor to basement bed room... ? 3- what MLV weight should one use for soundproofing ? thx...

@jamesoncross7494 4 жыл бұрын

Great information. Subbed.

@waynedominguez1507 3 жыл бұрын

WOW! well spent time I will subscribe to be one up on the building trades who claim to know whats best for your money.

@agnesanastazja 4 жыл бұрын

would this stop noise of door slamming coming from next door neighbours?Can this be purchased in UK ?

@iibsraj 4 жыл бұрын

Good information and I would like to know that pressure-sensitive adhesives used while installing MLV for Sound dampening. Thank you.

@nenoisecontrol2169 4 жыл бұрын

PSA is an option on most MLV products

@karlakay 2 жыл бұрын

@@nenoisecontrol2169 What is PSA ?

@jenniferbayliss3411 2 жыл бұрын

Thanks for the info

@claudestein9418 Жыл бұрын

Thank you for the informative video. Question: if MLV is STC 27, and a soundproof curtain is 17, do the numbers add together giving me an STC f 44? Like wise, if I add two curtains would the STC be 61?

@EdwinDPZ 2 жыл бұрын

So my garage has just the exposed studs. Would the ideal thing to do would be to put the MLV directly onto the studs and then drywall over the MLV or the drywall onto the studs and the MLV on top of the dry wall?

@JustAnotherFreak12 3 жыл бұрын

Hi! love the channel, I recently subscribed to it... I'm thinking about remodeling my kitchen cabinets.. can I add this behind my kitchen cabinets? would that work even though I won't be covering it with another layer of wall?

@haroon420 3 жыл бұрын

Can you compare mlv to tec sound 50? Or share a link where you’ve discussed it. Please and thanks.

@christinegardin1264 2 жыл бұрын

my concern is the FS flame spread and SD smoke developed rating of this material, and what the building code allows for the type of construction.

@emilychi6913 3 жыл бұрын

If I want to install MLV on ceiling to block upstairs unit coming to basement suite (basement tenant is complaining crazy about upstairs chair and footstep sound), what's the layer order? After opening the existing drywall on ceiling, from ceiling down: ROCKWOOL Safe'n'Sound® insulation, Resilient Channel (or Resilient Sound Isolation Clips), drywall, MLV (Goes here?!?), then paint (or can I add another layer of drywall here using Green Glue)? Please correct my order or if you advise anything should be put in or taken out.

@rickrayn 4 жыл бұрын

For a wall what would be the recommended thickness of MLV? I have seen some MLV that is 1/8" thick and others that are much thinner at 1.2ml.

@nenoisecontrol2169 4 жыл бұрын

I would recommend the 2# MLV. the more mass the better. how are you intending to install it? between two pieces of drywall? Here are the thicknesses: 1/2# MLV is 1/16", 1# MLV is 1/8", 1.5# is 3/16" & 2# 1/4" available in 4' or 4.5' wide rolls

@ensec6630 4 жыл бұрын

so wait, can I put it on a wall and just paint it? or do i have to sandwich it behind another layer of drywall? cause I need to soundproof a room but only temporary so putting drywall would be too much but i was thinking maybe i could staple mlv to my walls

@Natashahoneypot 4 жыл бұрын

Ensec just do it

@WonderfulWorldofAwesomeness 2 жыл бұрын

Does it help with an upstairs neighbor who is a heavy walker and walks with such a THUD that it shakes the entire building, the walls, and drops stuff?

@bonniedeen4120 Жыл бұрын

Great video! HELP.....My noisy HVAC closet with air handler/furnace and return, is a living room closet, 1 story ranch house on a slab. Until the HVAC is replaced, please: 1- clarify which MLV products with adhesive is good to apply to the big tin box of the return - either inside its walls or its exterior or both. To line the inside, the product must be odor free and safe. 2- Could you clarify for me which type of materials are generally best for "low level" versus higher level sounds? Plan to order MLV sheet 1LB for walls and door soon. Thanks.

@enriquebadillo3206 2 жыл бұрын

Can I use this MLV on my original wood floor and on TOP use engineer wood vinyl?? I am trying to minimize the steps, sound, ect of my kids running around because my downstairs neighbor keeps complaining to me that they run a lot and pull chairs, ect. please let me know what options I have, thanks in advance!!

@TaichiStraightlife 4 жыл бұрын

This question is not on-point, but it's about sound absorption or blocking. In my apt., I hear my neighbor's intercom buzzer as loud as my own; both her intercom station and mine are located in the same spot, separated by the wall. I unscrewed my station from the wall, and looking behind it, saw that our stations were separated ONLY BY A PIECE OF CARDBOARD, bent in half. So I look around my place and found a very thick unused sponge, maybe 2" thick. I put the bent cardboard back in and added the sponge, and then screwed my station back onto my wall. Is this likely to work? Does a thick foam sponge have sound absorbent properties? If it doesn't work (I haven't heard it buzz since, but it's only been one day) what should I use, instead of the sponge? What about coating the bent-over cardboard with duct seal compound? I think that's like modeling clay, which I've heard is helpful for soundproofing.

@janet3319 5 жыл бұрын

So glad to hear there is transparent MLV!! I have been looking for a solution for my home windows. Great video.

@tedcouch7912 Жыл бұрын

Wanting to install these in a ceiling, in between the floor joists, over the mineral wool insulation, following by 1/2 dry wall, plastered in between the floor joists, leaving them exposed. Reason is we have a low ceiling, so wanting to get all the headroom we possibly can. Do you think the mlv will still help installed in this way? Will it be far more noisy with the floor joists exposed? Thanks!!

@Mythbuster42 4 жыл бұрын

it blocks low frequency too, how low?

@eedom69 3 жыл бұрын

Are rubber mats 2nd place? More absorbant but less dense?

@NobleCreatorr Жыл бұрын

so could this be used on a completely open gap with maybe something holding it in place and blocking sound? my room divider doesnt reach the ceiling for some ungodly reason and all the light and noise from my roommate come into my room. gap is 118" length x 20.25" height x 3.62" width

@KEYBOARDTHAWAVE 2 жыл бұрын

Can you apply mass loaded vinyl to a existing bedroom wall and ceiling that's sheetrocked already

@lorettekeane1288 3 жыл бұрын

My yard gets lots of traffic noise and neighbors barking dog. If I hang this on the fence will it help much? 6 foot tall fence. Of course the sound can go over the fence but I'm wondering if it would be worth the cost...

@gersonjunior122 Жыл бұрын

Hi, How can I block bass frequency (20 - 180Hz)? Would MLV work?

@Susan70003 4 жыл бұрын

How much outgassing does this product have? Does it reduce indoor air quality?

@hagbard72 4 жыл бұрын

Can it take 170 degrees F safely?

@h7opolo 4 жыл бұрын

great vid. subbed.

@FruddyG 4 жыл бұрын

Would this be effective if attached to existing drywall, then placing Shiplap panels over it (for aesthetics). Used on exterior walls. Think a one-bedroom house, all four walls covered with this material. Thanks

@soundproofguide 4 жыл бұрын

It certainly would help! Just make sure to cover the entire wall because sounds will easily pass through gaps you might miss. The electrical outlet is one thing to look at since you can’t really cover them up with mlv. You can however stick some backer rods in between the electrical box and the wall to cover that gap and then seal the rest off with some acoustic caulking before putting the cover back on. That’s one area that sound can freely pass through walls that most people never think about. Let me know how it all works out for you!

@fotosldg 9 ай бұрын

Great video on soundproofing and use of MLV!! Wondering if you know if MLV can be used to absorb vibration from a metal staircase. I will send you an e-mail with a picture of the stairs in my house, hopefully you can shed some light on my challenge.

@AromaFrank 2 жыл бұрын

Where would be best to buy MLV today -2 year later- And from which company ?

@AmiableAmigo 2 жыл бұрын

Can I use regular MLV on ductwork? As can I just wrap it around instead of buying Thermo?

@angementorr 3 жыл бұрын

How can you tape it to the wall? Rental friendly

@toddroy9558 2 жыл бұрын

Can you use a thick plastic over the studs and under the Sheetrock?

@paulortiz2035 Жыл бұрын

There seems to be 3 thicknesses of mlv. .5, 1 and 2 pound ratings. Is 1 pound twice as noise reducing as .5 pound? Is 2 pound 4 times as noise reducing? Thanks!

@makemedance32 4 жыл бұрын

Thanks for this video! Will this keep sound from going out of my walk-in closet if I hang it on top of the walls, ceiling, and floor with heavy duty velcro? I live in an apartment and want to be able to take this with me when I move out. Is there anything I need to do when putting it up to make sure it works? I read it should have some space between the wall and itself for it to actually work. I can hardly find any info online about how to do this :(

@megaharuko25 3 жыл бұрын

You can try foam board insulation they are pretty big and they are $8 a piece at lowes or homedepot. I'm gonna try that maybe combine it with the vinyl. Maybe tape the board or staple them and take them with you when you move. I don't really know what I'm doing its just an idea I had for myself or someone else that wants to try it.

@husky7985 10 ай бұрын

Does mlv help with impact noise such as bass and footsteps from upstairs neoghbors?

@Tinask2009 4 жыл бұрын

Is it fire resistance? Thanks!

@ravitejamnm Жыл бұрын

Can I staple the mass vinyl to the drywall and screw it together to the ceiling?

@assshakerstudios549 4 жыл бұрын

So I need to basically build a wall, at a 30degree angle, that will go from a wall to another wall. There will have to be a door in there, as it's going to block off the front room, from the main hallway to the only full bathroom and 3 bedrooms as well as the living room which has a tv 4 feet from said wall. Or I need some way to put up a wall for a recording/mixing session, and take it down...daily! The wall has to be floating as it's a rental house and there is the floating, fake hardwood floors! So how do I do this, as I am not handy at all! All thumbs...

@anurruti 3 жыл бұрын

So, you did not mention on purpose or inadvertently, the disadvantage that mlv smells. Am I correct?

@Ozworldz 2 жыл бұрын

You mentioned that the Soundsulate MLV has no odour. Do you mean that the Soundsafe from Home Depot (or other available mlv) does have an odour?

@thpxs0554 4 жыл бұрын

It needs to hang like a curtain in the void between the original wall with the noisy neighbour and the new stud wall ,then it will block just about all the noise. As soon as it’s in contact with the wall it’ll transmit the sound through.

@LifeofPhi Жыл бұрын

And how to to this like you recommend?

@thpxs0554 Жыл бұрын

@@LifeofPhi I fixed the carpet to a wooden batten ( a piece of 2 inch X 1 inch wood and then I screwed the batten through the ceiling and into the timbers above . I first went across the ceiling with a sharp spike and made lots of little holes and each time I found a timber I marked it on the ceiling. If your timbers are going to go in the same direction as the batten then you may find it’s too close to the wall and the next one too far away from the wall, so you’d need to get above the ceiling and add timber work to support your hanging curtain .

@LifeofPhi Жыл бұрын

@@thpxs0554 Thanks. How is result? MLV is crazy expensive now.

@michaelmattson3515 3 жыл бұрын

Excellent.

@VitaeSerenti 4 жыл бұрын

but is the vinyl safe? apart from barium sulfate

@LeoGKeogh 4 жыл бұрын

Where in The Algarve can I buy 280cm x 230cm , width a depth of 6cm ...so that I do not hear my neighbour ??

@spinkey4842 4 жыл бұрын

you sound proofed this video

@littlehell2655 3 жыл бұрын

Thank you so much i needed this!!!!

@fae137 11 ай бұрын

Might need this. My new bedroom shares a wall with my elevator and elevator machine room. Very loud.

@invisableobserver Жыл бұрын

Is the mass loaded vinyl volatile organic compound free? it would be nice if it was made to block RF & EMF radiation also. Unfortunately I could not listen to the whole video because it was emitting a frequency that hurt my ears, some videos do this, I have not found a solution. Is MLV VOC free?

@dougiequick1 4 жыл бұрын

Would be interesting to use the product for a firearm test fire chamber ....like a bucket of deep sand you fire into to test firarms in your garage and just wrap this stuff around the bucket and tape a cap piece on with a hole for the barrel....would be really nice to have a simple inexpensive means of putting such together ...I think the finished product on market are pretty pricey

@danramirez8553 4 жыл бұрын

will i get double the effectiveness if i put a vinyl barrier over my wall and use acoustic pain over it?

@Natashahoneypot 4 жыл бұрын

Dan Ramirez different types of layers block different frequencies in different ways so the technique is to layer. All different stuff. Think of an old metal bell ringing. If you put it in a box it will be slightly quieter. If you surround it with cotton wool then put it in a box then seal the box and wrap it several times it will be alot quieter.

@mikekeating 4 жыл бұрын

Been in construction for almost 20 years. In my experience the most effective way to soundproof a room is to use two layers of fire rated 5/8 drywall with a healthy amount of acoustical sealant between them. .. Looks like a great product for soundproofing floors though...

@soundproofguide 4 жыл бұрын

You’re completely right! Thanks for commenting!

@mikekeating 4 жыл бұрын

@@rdb223 I typically just use acoustical sealant.

@mikekeating 4 жыл бұрын

@@rdb223 I'll be honest .. I've never used the other two products. Never needed to. Two layers of 5/8 fire rated without the acoustical works great for residential. I'm actually doing a few commercial sound barriers rite now with out the acoustical. In that situation we build a new wall 1/2 inch out from existing one. Insulate it with standard insulation, run sound bar vertically every 2 feet starting 1/2 inch of the floor and ending 1/2 inch from ceiling and then the two layers of drywall ..

@Agtsmirnoff 4 жыл бұрын

If I was looking to soundproof a window and didn't care about covering it up and blocking it, could I run it from end to end around the frame of the window to fully cover and seal the window using MLV?

@TotzkieGG 3 жыл бұрын

i have this same thought in mind

@Jack-ns9sz 2 жыл бұрын

did you try iit?

@Agtsmirnoff 2 жыл бұрын

@@Jack-ns9sz I didn't. I ended up complaining to my landlord and she was able to switch me to an apartment down the fall away from the street. sorry

@preetamsingh5792 Жыл бұрын

Nicely explained

@crazydrifter13 3 жыл бұрын

4:20 hahahah that washing machine tho

@gregorystein4430 4 жыл бұрын

You mentioned using Mass Loaded Vinyl under Vinyl flooring to cut down on noise transfer between two floors (apartments). Can you lay the vinyl flooring directly over the Mass Loaded Vinyl, or does another surface need to be laid in between?

@MidwestSpecial 3 жыл бұрын

Greg did you ever get an answer to this question?

@gregorystein4430 3 жыл бұрын

@@MidwestSpecial No

@chrisfriedl6180 2 жыл бұрын

I would do another in between to be honest. Vinyl flooring can technically be laid straight to a subfloor but adding the correct underlayment can keep a warranty from being voided

@powerWithinUs4055 Жыл бұрын

Gold floorlot is what I used between existing hardwood floor and new layer of real wood. Looking for decoupling and vapor barrier. It’s a kitchen where there is bound to be water spills. The rolls are inexpensive, marked with grids, cuts with scissors. I was glad to have extra. I put it on the wall behind the radiators. Less dust accumulation, and the foil throws heat back. Used blue painters tape to secure. Been prepared to take it down, but no problem at all, no odor, nothing. It’s easy to work with, light enough, one person job. Used it on basement overhead joists, gives a finished look, no dust accumulation and reflects light. Staple or tape. I used it on canvas stretchers, used wire and eye hooks to suspend. It'll come down easily to be reused someplace else. We’re new at these things. Delighted to see this site, great advice, can see what others are doing. Remember to take before and after pictures for your own edification, and to be used to impress the new buyer.

@marco03 Жыл бұрын

I can’t seem to soundproof my room. I have tenants downstairs and I hear their tv sounds and them somewhat talking. I’ve used this under my carpet but only helped so much and still hear it. I could hear him snoring and it’s driving me crazy. Any help what I could do to their room which is right under mine. I’m the owner

@johnq878 3 жыл бұрын

Hi, How would you soundproof a portable basketball net? I want to reduce the noise from the ball hitting the rim and backboard as much as possible. Would gluing clear MLV to the back of an acrylic backboard work? Would gluing MLV under the rim and where it's joined to the backboard work?

@sgill4833 Жыл бұрын

Thicker back board and rim. The ball will still make a noise tho when it bounces.

@beautyandthebudget3642 Жыл бұрын

@@sgill4833 the repetitive sound of balls hitting the ground like that is torture