Mass Loaded Vinyl Soundproofing - Sound Deadening Matts!

Рет қаралды 37,624

Жыл бұрын

Mass loaded vinyl, MLV for short is a flexible and very dense material.This is an updated video from a few years back with a lot of new information regarding mass loaded vinyl and if it's worth using MLV for Soundproofing.
There are a lot of soundproofing material out there but not many will match up to how this dense, thin and heavy material like mass loaded vinyl.
Links to the soundproofing products I talk about in this video. All links are from Amazon and are affiliate links which helps my content at no extra cost to you. Thank you!
MY AMAZON STOREFRONT - amzn.to/47kB5gr
1. Mass Loaded Vinyl - amzn.to/3smXzP6
2. Green Glue Noise Proofing Compound - amzn.to/3qIZklR
3. Indoor Carpet Glue 1 Gallon - amzn.to/38b6dGf
4. Indoor/Outdoor Carpet Glue 1 QUART - amzn.to/3uDksuO
5. Putty Pads - amzn.to/3R4KTCZ
6. Best Work Gloves - amzn.to/3K0wqpG
7. Small Tool Set - amzn.to/3Aph9f1
8. Short Ladder - amzn.to/3Atb80O
9. Safety Glasses - amzn.to/3AphuhN
10. 3m Reusable Face Mask - amzn.to/3AYjxbQ
Links to the three Playlist for soundproofing walls doors and windows.
Soundproof Doors - • Door Soundproofing
Soundproof Windows - • Window Soundproofing
Soundproof Walls - • Soundproofing Walls
Article to check out for all you mass loaded vinyl need.
soundproofguide.com/mass-load...
Bear in mind that some of the links in this video are affiliate links, and if you go through them to make a purchase, I will earn a commission. Keep in mind that I link these companies and their products because of their quality and not because of the commission I receive from your purchases. The decision is yours, and whether or not you decide to buy something is completely up to you.
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational, or personal use tips the balance in favor of fair use.
Consider SUBSCRIBING if you like this content! Thank You.

Пікірлер: 135

@soundproofguide Жыл бұрын

Article with Many links and product information - soundproofguide.com/mass-loaded-vinyl-mlv/

@Raidflex Жыл бұрын

I have a finished attic that I am planning on converting to a theater/game room. I want to try and mitigate some of the noise to the rooms below. Only the floor has finished rooms below. 3 of the 4 walls are exterior walls with insulation and the 4th wall is just unfinished attic space on the other side. There already is fiberglass insulation under the subfloor. I was going to add a layer of MLV on top of the sub floor, then a thick carpet pad and carpet. I was wondering if it worth it to also add two layers of OSB on top of the MLV and use GG in between the two layers of OSB. Or should I just stick with the MLV and thick carpet pad.

@phoenixxavier9615 9 ай бұрын

I live next to a house that has been converted into flats. Each of those flats have their kitchens built against the party wall between our house & next door. This isn't a problem except with our main bedroom. The flat the other side of the wall has a fridge or frezzer that constantly emits a low hum. This is obviously a problem at night as this constant low hum is deafening. Would MLV mechnically attached to my side of the party wall which will then be finished with a stud wall (allowing for a inch gap between the MLV & the stud wall) infilled with sound deadning rockwool minimise this low hum, or would that setup be better suited to higher frequency noises? Your advice would be appreciated.

@mariabatts8792 2 ай бұрын

Hello, thank you for the great video and info. There is a lot of traffic noise coming through the walls in bedroom could I install the MLV on the existing walls and put Sheetrock on top and paint?

@runningdowna997turbo Жыл бұрын

I am thinking of using Sonapan boards on my ceiling fastened to the floor joists with a 2lb MLV on the Sonapan and then 5/8 drywall. From that I will suspend a drop ceiling so when I install LED pots I have no penetration through the ceiling assembly. I'm wondering how you think it will work MLV between Sonapan and 5/8 drywall. I will be putting sound and safe I In the joist cavities. You never talk about Sonapan, possibly because it is made in Canada?

@user-ty2gr6kv9q 9 ай бұрын

Hi! I would to add MLV to my new wood fence i am about to add... but how do you prevent rotting from water and wood get trapped outside?

@randomgyan08 5 ай бұрын

My recording studio desk is big and it gives me reflection because the dubbing room glass is close to the desk. Does the MLV solve the problem ? or is there any other way where the reflection will go and we do not have to tamper the desk ? Thanks in advance

@13101s Жыл бұрын

If I ever find MLV for my garden fence -- does it go on the outside or inside? On your photo it seems to point to the inside of the garden, other photos I have seen had looked to me like the outside. Does it matter??

@Steampunkkids 9 ай бұрын

I’m looking for sound deadening for my baby’s room in an apartment. We don’t own and can’t move. I’m unsure how we could utilize MLV to keep the neighbor’s from waking up my baby. Your previous videos made it seem like I would just have to hang it on a wall. This updated video makes it seem that hanging it on a wall is pointless. We would need to nail it tightly to the wall. Is that correct? Any advice, please!?!

@timarmstrong9026 Жыл бұрын

Speaking of multiple uses it works well for lining the insides of DIY speakers to reduce the vibration of the outside of the cabinet

@soundproofguide Жыл бұрын

Yes, great tip!

@raviakula5449 5 ай бұрын

MLV works on the principle of reflecting the sound back where it came from. So, the inside of your DIY speaker will become an echo chamber if you don't add absorption material on top of MLV layer

@LL-rx8un Жыл бұрын

thx for video, My condo requires a IIC of 55 if replacing carpet with hard surface flooring. If I used LVP/SPC as flooring (I assume its better choice for sound?), would a thick rubber underlayment OR_ the MLV U speak of be better to achieve IIC 55? Or is it similar? Just dont want the sound engineer to come out and waste$ if I dont have the best underlayment to test. thanks for your input if you can

@danielcerda5967 3 ай бұрын

Thanks for the videos, there are great! Would you install MLS over dry wall, from outside ? Thinking to do it in one of the walls in the garage. Project for Music purposes. Cheers

@honnyheart 3 ай бұрын

Hello. :) Thank you for great videoes! I watched most of your videos about existing walls, yet as I share pure concrete walls and floors with noisy neighbors, and only have about 3cm depth available on the walls for a stud wall, I was wondering if installing MLV directly on the concrete with screw fastening, would be worth it, compared to the cost. 1a. Do I risk creating a mini 'drum' effect if I install it directly to the concrete wall? 1b. If I install a drywall directly on top of the MVL, could that counteract and create a drum effect? 2. On the concrete floors are hardwood installed (50+ years old). I have put down thick wool carpets with sound dampening foam on the backside. Yet sadly the noise and vibratio Cost vs. effect: would it be worth it to install MLV under the carpets? 3. The ceiling wouldn't have any installed due to rules of the apartment company. Cost vs. effect - is it worth it to only install MLV on direct shared surfaces (1 wall and the floor) in the living and bedroom that are the most noisy rooms? Thank you for our knowledge sharing and great videoes! 🎉

@starfighter_ten 10 ай бұрын

Thanks. How to order in Switzerland? I can not find a good source. Any hints maybe?

@crawfprof Жыл бұрын

Very informative video. My bedroom shares a wall with my kitchen and the fridge noise is measurably about the same on the bedroom side of the wall as it is in the kitchen near the fridge (about 42 db). Would installing mass loaded vinyl directly to the drywall behind the fridge be worth considering? It would be hidden by the fridge. The fridge is walled in on the sides and above. I could put the mass loaded vinyl above as well. A bigger project would be to tear out the drywall on the bedroom side and install soundproofing inside the whole wall, but I'd like to see if a simpler solution would work. Thanks!

@soundproofguide Жыл бұрын

Trying some MLV behind the fridge wouldn’t hurt, it might absorb a bit of the vibrations but you will still hear the fridge because you would have to cover the entire wall with MLV to really drown out the fridge. Adding just a piece behind the fridge will help but might not be enough soundproofing for you to be satisfied.

@Justjewels8436 2 ай бұрын

Will it work for base sound from neighbours, im thinking 1/4 inch anything else i can do?

@MikeUIibarri Ай бұрын

I used a ton of this stuff when installing audiometric testing chambers. Primarily on floors. One image shown here is actually the padding we also used under the carpet, and not MLV. MLV is what you want. It's quite thin and... 1. SUPER expensive. 2. SUPER heavy.

@frederf69 Жыл бұрын

how does MLV compare to Tech 50 please?

@teejoyu36 Жыл бұрын

Can you advise what to do about power sockets, light switches or lights hanging from ceiling? Is it install around the outside or use green glue? Thank you.

@lionintu 9 ай бұрын

There's putty for that

@creativegreatsvisuals Ай бұрын

can you pin it over a window somehow to minimize sound from the outside ?

@morganwellsmusic Жыл бұрын

What temperatures would MLV have to be exposed to for a long period of time in order for the plasticizers in it to ignite? I've looked everywhere for an autoignition temperature for mass loaded vinyl and I can't find anything. One spec sheet just listed it as "not applicable". Asking because I live in Phoenix and want to use it over some windows in my home studio but also don't want to set me house on fire when the summer comes XD It'd be on the inside of a window that has a shade on it so I'm probably overthinking it but more info always helps I supppose

@soundproofguide Жыл бұрын

Rule of thumb with MLV is the drywall will be completely engulfed before the MLV is showing signs of damage due to fire. Some use this as a fire barrier between walls because it will take much longer to ignite compared to the rest of the material on the wall which could give you extra time to get to safety.

@powderedwaterpudding Жыл бұрын

Have you ever tried using it on the *exterior* of a house? E.g. take off the siding, staple it over the house wrap, then replace the siding? I never see anyone talking about this, even though it would seem to be by far the least invasive way to insulate from exterior sound.

@soundproofguide Жыл бұрын

Unless you have sealant in between the seams and make sure there no gaps, I can’t see it working that well.

@Martin_Rsh Жыл бұрын

Why is out of stock in aazon?

@sharonbeatty8047 Жыл бұрын

We plan on converting our 2nd floor to a rental space. We will pull up the floors and rock wool the space, and screw down the subfloor to eliminate squeaking. How would you recommend we use mlv here? Thanks. Love your videos fyi

@KarlGutowski Жыл бұрын

You sound like you did 15 minutes of research and are about to waste a bunch of money. Check out Home RenoVision DIY for a bunch of videos on what actually works in soundproofing.

@NobleCreatorr Жыл бұрын

so could this be used on a completely open gap with maybe something holding it in place and blocking sound? my room divider doesnt reach the ceiling for some ungodly reason and all the light and noise from my roommate come into my room. gap is 118" length x 20.25" height x 3.62" width

@soundproofguide Жыл бұрын

MLV works best when is stable, inside the wall or glued/nailed to the wall. The key is to have he entire wall covered. Any gaps will drastically lessen the effectiveness of MLV.

@liamb6014 10 ай бұрын

Is there a reason I can't find anyone talking about attaching MLV to a door? I'm trying to improve the soundproofing of a home office from family noise elsewhere in the house, the door is the biggest culprit. Weatherstripping has helped, I'm not changing the door. MLV seems like a option to add mass to the door and is neater than hanging a blanket (I don't want to have to remove/ walk through a blanket each time i enter or exit the room)

@JP5466 2 ай бұрын

I planning to do this to my basement interior hollow core door. I used 1/2" birch plywood on the noisy side of the door and weather stripping. Very good results so far. I plan on add 1/8" MLV over the plywood, or to the other side of the door, but I want to be sure it doesn't get too heavy and break the hinges, only 2 of them on there.

@glenn4641 Жыл бұрын

How successful would it be attached directly brick (presume) wall plastered over but just using MLV only. Would it successfully block out noise and how effectively.

@JP5466 2 ай бұрын

Brick walls tend to not be fully flat. I would put some studs over it, hang the MLV, then 5/8" drywall over that. Make sure the wall is totally sealed.

@theodoregreen687 Жыл бұрын

Great video...I have brick walls that let in a lot of noise from neighbors. Would MLV be a good solution? better yet, Can MLV be mounted to brick walls? Thank you

@usa5439 4 ай бұрын

Yes but idk if you'd want just a wall of MLV

@JP5466 21 күн бұрын

Yes, but it won't do much. What you really need to do is build another wall over the shared brick wall with 2-3" of space in between. The wall cannot touch the brick wall in any way. The wall is constructed with 5/8" drywall, Rockwool in the stud cavities, 5/8" over that, MLV over that, then another drywall layer over top of that. The entire thing needs to be sealed air tight with acoustic/stretch calk. This will provide MUCH more sound control than MLV on top of the brick wall.

@hiimmidas Жыл бұрын

I want to soundproof my condo without ripping down the existing drywall. Would hanging MLV + GreenGlue + quiet rock drywall over the existing drywall help much? How about with low frequency noises like an AC condenser on the roof or my neighbors washing machine through the wall? I can also hear their voices.

@soundproofguide Жыл бұрын

Yes this would definitely help! Just make sure you leave no gaps between the sheets of mass loaded vinyl. Best of luck!!

@level80888 Жыл бұрын

green glue is hoax. Find more at acoustic fields channel.

@desiguy5508 Жыл бұрын

What did you end up doing? I am in a similar situation.

@JohnPapaGros Жыл бұрын

Can ceiling installed resilient channels support the weight of 2 layers of 5/8” drywall with 2lb MLV sandwiched between?

@JP5466 2 ай бұрын

That's a great question. That's a LOT of weight, so I'd say no. I would install the MLV first and then the channel over top of the MLV.

@chrissac8584 6 ай бұрын

Is it okay to put up the mass loaded vinyl in small 1 X 1 foot sections or should i use bigger pieces so the sound has less spaces to seep though?

@JP5466 2 ай бұрын

Bigger pieces are def better. Harder/heavier to install, but much less space for noise to seep though.

@fredericguyon1449 Жыл бұрын

You mention to install MLV between the drywall but both video showing the installation shows staples to the timber frame. It seems a lot easier to staple on the timber frame rather than between drywall and it is hard to understand why it would make a difference to sound blocking if install between the timber frame and the drywall or between the 2 drywall. Could you explain? What about installing with resilient channel? It seems that if the MLV is installed on the timber frame, then the resilient channel can be installed on top of the MLV and then the 2 layer of drywall. I have read resilient channel system failing and I suppose the weight of the MLV if install between the 2 layer of drywall can be a problem. Thank you for your thoughts on this and the theory. Is there ant tests which would have done showing what is best?

@soundproofguide Жыл бұрын

You can go either way. Most people with an open wall would suggest MLV on studs and then a layer of drywall. I would go with the suggestion I made though for better results. 😊

@EstebanLemonde 4 ай бұрын

Following. Have you installed MLV already to share the results? Did you install it between 2 layer-drywall without installing a new frame?

@gehasafras Жыл бұрын

Can I hang thick MLV on a 10' chain link fence outdoors to block highway sound?

@soundproofguide Жыл бұрын

Yes you can. This is a good way to block some of the traffic noise!

@PsulOrtiz 3 ай бұрын

Would it make sense to use the mlv as spacers ( perhaps 2 or 3 layers thick, in 4 inch wide strips 4 or 8 feet long that the dry wall screws would penetrate.) between layers of 5/8inch drywall? The mlv would make a dead air space between 2 sheets of dry wall and reduce vibrations. Hopefully. Or would 1/8 inch cork do as well as a spacer? (The idea being to keep the 2 dry wall layers separated, to lessen vibration transmission from one sheet of dry wall to another.) Green glue is doable, but the expense is pretty wild! Comments, please. Thanks in advance.

@JP5466 2 ай бұрын

The cork is a great idea. Cork is more of an absorber. It should reduce vibrations better than the MLV.

@JP5466 21 күн бұрын

I did some DIY experiments recently with MLV and cork. MLV works better as a sound blocker, but was even better when combined with 1/2" cork sheets. Even helped attenuate the lower frequencies.

@presterjohn71 7 ай бұрын

I can get hold of used vinyl flooring for kitchens for free. I know it is not quite the same but surely this would be an excellent substitute for this product if on a budget?

@JP5466 2 ай бұрын

Not the same at all and probably will do nothing for sound control.

@Ranger7Studios Жыл бұрын

Could you make sound panels for your walls out of MLV?

@soundproofguide Жыл бұрын

You could but they wouldn’t work as well as acoustic panels made with a wood frame and insulation inside. MLV does absorb “some” sound wave but will deflect most of them due to its flat and semi hard surface.

@RAM_845 Жыл бұрын

@SoundproofGuide Hi there, Is it possible to have MLV installed on a mobile wall? Especially if you're in an asbestos-filled room.

@soundproofguide Жыл бұрын

Yes, I wouldn’t see an issue. As long it’s not just hanging from the ceiling you should be fine. Works best if sandwiched between your old wall and your new sheet of drywall.

@RAM_845 Жыл бұрын

@@soundproofguide cool coz I'm based in Australia and the cost of removing and dumping the asbestos is pricey I've got acoustic tiles on my walls behind my studio monitors in my bedroom, brick styled stick ons with foam materials on my walls too and surround the tiles in the back wall... I needed the MLV for the wall facing the lounge room so when I listen to music it won't bother them .

@desiguy5508 Жыл бұрын

I have a 8 x10 party wall which I share with the neighbor. I can hear mostly conversations from my neighbor. I wanted to know if I can add MLV + GreenGlue + quiet rock drywall to it to reduce the sound passing through it. One way to reduce the sound is to do drywall demolition, I don't want to do that as its expensive and a lot of effort.

@soundproofguide Жыл бұрын

Yes, this would definitely help! Let me know how it turns out!

@killeur6060 10 ай бұрын

Did you finally did it ?

@JP5466 20 күн бұрын

Yes it will help, but I would not demolish the existing wall. The cheapest way would be to simply cover the shared wall with 2 layers of 5/8" drywall and seal it all with stretch calk. If you have more money to spend you could put MLV over top of the party wall, then the 5/8"drywall over top of that. That should block out 95% of the conversations. Keep in mind it probably will do that much for loud low frequency music. To reduce low frequencies you would need to build a wall over the wall with 2-3" gap in between and a bit more mass. My brother has been a contractor for 25 years, in his experience Green Glue is all hype, overrated and a total waste of money.

@Kapsouro 10 ай бұрын

Mlv Vs sonopan?

@user-vf1oo1xs9d 11 ай бұрын

What tape should I use when I need to wrap the pipes with MLV?

@soundproofguide 11 ай бұрын

If you haven’t bought it yet, I’d use the self adhesive tape. Look for the type of sound deadener for vehicles. Sticks right to the pipe no problem

@globetraveler187 Жыл бұрын

What do you think if I will cut square 1x1 meter and will glue with soundproof glue to the ceiling and after paint white.I think there could be a result to hear less neighbours upstairs .

@soundproofguide Жыл бұрын

Not unless it covers the entire ceiling. Also, the glue would not be sufficient to hold the MLV in place. You would have to nail or staple it into the ceiling. The MLV would definitely work better layer on the flooring above.

@globetraveler187 Жыл бұрын

@@soundproofguide yes entire ceiling,thanks for advice!

@TomoBishBosh Жыл бұрын

I’m looking to cover the inside of a boiler cupboard with this, if I make sure there are no gaps in the MLV, would this work?

@soundproofguide Жыл бұрын

It definitely could work. It’s hard to say without the specifics but the MLV will not only block noise but will also absorb vibrations. Best of luck and let’s me know how it turns out. Make sure there are no gaps between mlv sheets.

@starlights214 Жыл бұрын

@@soundproofguide i want to install a water pump insids my house ,placing it inside a kitchen wood cabinet, is it enough to stick the MLV sheets to the wood or should i consider adding another layer of wood or dry wall above them? What if i made a sound insulating box for the pump ?which material shoyld i use? Currently i am not abls to find it in my country .i may depend on rock wool.

@martinisfuni 4 ай бұрын

Can you use this on the outside of a bedroom door? My roommate plays the radio all the time and I cant concentrate when im trying to study.

@JP5466 2 ай бұрын

Should help. Also install weather stripping and make sure to seal any gaps air tight.

@matreyia 21 күн бұрын

I keep seeing MLV installed directly on studs then resilient channel, then drywall.... and all your videos say apply directly inbetween two drywall sheets... which is correct?

@JP5466 21 күн бұрын

In my experience, sandwiched MLV (between 2 layers of drywall) is better than hanging MLV on studs.

@soundproofguide 20 күн бұрын

Agreed! 👍

@matreyia 20 күн бұрын

@@soundproofguide Ok, so insulation, then resilient channel, then 5/8 sheet, then MLV, then another 5/8 sheet?

@selenacruz161 Жыл бұрын

Does MLV have to be installed vertically ? i see that all the videos on MLV they always install them vertically, is there a specific reason for that ?

@soundproofguide Жыл бұрын

It’s because they come in a roll so it’s much easier to install vertically. Gravity is your friend 😉 It does not HAVE to be installed vertically but it’s just easier.

@selenacruz161 Жыл бұрын

@@soundproofguide Got you! Thank you so so much! i had a contractor install MLV and he went from vertical to horizontal in the middle of his project not sure why 😂

@reyfuertes135 Жыл бұрын

I live in a building condominium, im planning to DIY sound proofing my wall since i can hear people talking in another unit. Is 1.5 inches is enough where i dont have much space, MLV + Drywall (2x).

@desiguy5508 Жыл бұрын

I am in a similar situation. Did this work for you?

@thebeastgamer6932 Жыл бұрын

Hey, how's it going ma friend. Question for ya soundproof wise. I think i live with two roommates and one roommate are rooms next door to one another and from i have noticed when i lightly test it sometimes that the wall separating our rooms appears to be i think a bit follow or hollow enough to certain extent for that matter anyways. But anywho... that being said, was wondering what could be the best path to go for best results for making my space a bit more private type sanctuary in a sense.

@thebeastgamer6932 Жыл бұрын

Along with noise or convos going on whatever etc in there room that stays in there room and same for mine. Wether gaming, chatting on phone with so and so etc an on stuff like that.👌 Oh lastly before i forgot to mention this as well my entertainment setup faces the wall that separates our rooms to add that factor into the situation as well with the rest of all that i have said my comment here. Cheers, thanks! 🙂😎🙏🤙👊

@thebeastgamer6932 Жыл бұрын

@SoundProof Guide so...? 😌💁‍♂️

@soundproofguide Жыл бұрын

Hey sorry for missing this comment. So you’re living in an apartment where you can’t really make any permanent alterations to make the room more soundproof? If this is the case then there’s not much you can do because adding panels on the wall will not block noise and hanging mass loaded vinyl floor to ceiling will not get you the results you’re looking for. Other than ear plugs and white noise machines, there’s not much you can do if you can’t add mass to the wall. You could add a door sweep to cover the gap at the bottom of the door. This would block a lot of noise if it’s coming from the hallway. Watch one of my videos oh how to soundproof a door; this is something you can do because adding a door sweep is not permanent and you can take it with you to your next residence. Hope this helps. Best of luck.

@thebeastgamer6932 Жыл бұрын

No not an apartment or more town house complex kind of thing i ment or must have not been the most clear about that in my question to you. My bad on that if that's the case 😌🤔🤷‍♂️

@carrizzle9586 4 ай бұрын

I came for a video on Mass loaded Vinyl and he references 2 guys named Matt. My questions are "Who are the Matt's and how can they help with sound deadening"???

@yogeesh93 Жыл бұрын

Can this is used in backyard to reduce traffic noise?

@soundproofguide Жыл бұрын

Yes! A lot of people place it right on the fence!

@donovans6472 Жыл бұрын

does this help for blocking bass....i don't want to hear my neighbors bass...

@JP5466 2 ай бұрын

Yes, but you're going to need a lot more than that. You're probably getting lots of vibration too. Low frequency is a tough one. More mass is the key. In most cases you will only be able to reduce the noise by 50%. Some jerkoff used to live next door who sometimes played loud music with bass blasting. He was a renter who was high on drugs most of the time, so reasoning with him did not work. Calling the police didn't really do anything, so I took him to court, that eventually forced him to move... thank god.

@sabotagemanni8054 Жыл бұрын

Would double layering mlv do more for noise reduction?

@soundproofguide Жыл бұрын

Yea it would! I would do one layer of the 2lb MLV before having two layers of 1lb MLV but if you double up the 2lb MLV you should have better noise reduction.

@JP5466 20 күн бұрын

@@soundproofguide The 1lb MLV is much easier on your back too. 2lb is heavy!

@AIC994 Жыл бұрын

Can we use this to sound treat windows?

@JP5466 2 ай бұрын

Yes. I made a window plug and put it over my bedroom window. Def helps.

@7swordmary567 Жыл бұрын

Thin AND Effective makes MLV very attractive. Is self-adhesive MLV a Renter-Friendly application? As long as it’s not inhaled, calcium carbonate [aka chalk] is cheap +innocuous. Shouldn’t Calcium Carbonate MLV be more affordable? How does MLV compare to Cork? Must MLV be black? Seems like it could be as colourful as Marmoleum, No? Has soundproofing effectiveness of polystyrene SIP panels been investigated?

@JP5466 2 ай бұрын

Cork is a better absorber than MLV. I'm about to start a basement project using cork + MLV + 5/8" drywall.

@zainsyed9811 Жыл бұрын

Thanks great video. I have a laminate flooring in my bedroom and I hear a constant vibrational noise from downstairs (like a pump of sorts running). I can't alter the floor. Would this be safe to lay over the laminate floor and cover with a big rug and be useful in reducing the sound ? Also would the material of the mlv damage the surface of the laminate? Thanks for your advice much appreciated

@The_O.G_Cyber_bully_24Hr_Ban Жыл бұрын

what you do and will work 100% you put it under the laminate you use the MLV as the laminate underlay, you lift the laminate if its click (locks together) use a sticker and number the laminate or pencil and write the numbers so you know where they need to go back down I would lay it then put the laminate back over it and fit a carpet over the laminate get someone to fit the carpet with grippers and they will tuck it in with a carpet stretcher for you

@The_O.G_Cyber_bully_24Hr_Ban Жыл бұрын

i live in the UK carpet and laminate fitting is not that expensive under 100 dollars 4mx4m room more like 60 dollars its well worth you doing if ypou can afford it dont put it over the top of the laminate for the saving of 100 dollars its not that hard to DIY but its not much to have someone do a proper job of it either wat dont put it on top of laminate

@jacoblynch9862 Жыл бұрын

OK what I don't understand is let's say you have a home theater room and you simply want to get the sticky type and put it on your wall directly on your wall sticking to the wall as a flat surface on your wall with that night still be decent, sound blocking and absorption

@soundproofguide Жыл бұрын

The sticky type is used mostly in cars. I’d only buy that type if I was using it around water pipes.

@gregslabaugh7565 4 ай бұрын

Hey thank you for this! What would you think of wrapping a commercial vacuum cleaner in MLV? Trying to quiet mine down to avoid disturbing customers.

@gregslabaugh7565 4 ай бұрын

The exhaust noise is treated well, but the plastic body of the vacuum vibrates at the frequency of the motor and transmits noise that way. The motor is decoupled with rubber mounts, but some noise energy is still transferred to the body of the vacuum

@shortingthetrend Жыл бұрын

Can you use yoga mats to sound proof?

@soundproofguide Жыл бұрын

Yoga mats would only be good to absorb foot traffic noise. It won’t do much to actually block noise.

@podcat0185 8 ай бұрын

Why does MLV smell so bad? How long does MLV off gas? Years? Just had my bedroom wall soundproofed with MLV because of noisy neighbors, and just got to warn folks, the fumes and offgassing have made the room unusable. It's been several weeks and even with the windows open, fan blowing, and air purifier that filters out VOC, the smell is overpowering. On the bright side, I can't hear the neighbors. On the downside, I'm now sleeping in the living room.

@PeopleHealthTru 8 ай бұрын

Did you put drywall over the mass loaded vinyl?

@PeregrineChurch 6 ай бұрын

If you paint it with multiple coats of latex paint, that could potentially seal in the smell

@usa5439 4 ай бұрын

Mine doesn't smell at all. Have a roll here and never smelled a thing.

@JP5466 2 ай бұрын

Different manufactures of MLV. Some smell, some don't.

@invisableobserver Жыл бұрын

Vinyl is toxic when temperatures are hot, if the vinyl was replaced with a nontoxic, none volatile organic compound material I may be interested in using it. I installed it on a friend's condominium and I was not impressed with with the sound deadening, from indoors I could still hear voices and cars driving by.

@soundproofguide Жыл бұрын

Interesting. Thanks for your feedback. The only time that this type of vinyl I was talking about is toxic when exposed to heat is when it’s actually hot enough to burn, like a house fire, even then it will take a while to begin to burn which could give people more time to get out of the house safely. I do understand your concerns however. Thanks and great comment!

@phillamoore157 2 ай бұрын

This channel went form being a practical soundproof guide, to you using soundproof topics as an excuse to make KZfaq videos. And, now you have so many videos that give nothing but academic information, that they're almost useless for people actually building a soundproof room. You've got a good channel, but I've been doing this for 30yrs (in one fashion or another) and not once has someone asked me for the MSDS of MLV. *Is it practical, and affordable, and how to hang it....that's what people want to know.* You have so many videos giving winded information like this, that it's becoming pointless to even click on them anymore. At least put something in the titled that reflects what this video ISN'T, so the viewer can move on to something more appropriate for what they're doing.

@JP5466 20 күн бұрын

It's all about the $$$. Also, some of the advice he gives is totally incorrect. YT seems to love him though. Just type in "soundproofing" into the YT search and his vids come up before all others.

@level80888 Жыл бұрын

$130 for one 4x10 sheet is rough. Considering I need dozens of it.

@soundproofguide Жыл бұрын

It is, but it does work 😊

@michellem5647 Жыл бұрын

Omg seriously? I need to soundproof both my bedrooms in my townhome bc my neighbors are loud jerks

@soundproofguide Жыл бұрын

@@michellem5647 That's very unfortunate Michelle. It can get costly but it gets cheaper if you buy in bulk. Just remember, as I said in my video, they come in one single roll that can weigh hundreds of pounds, best to have a helper. Best of luck.

@michellem5647 Жыл бұрын

@@soundproofguide im going to hire some to do it…

@killeur6060 10 ай бұрын

@@michellem5647did you finally do it?