MASSIVE DJ Crawler 72MM Pin Tires! So Good It Feels Like Cheating

No video

MASSIVE DJ Crawler 72MM Pin Tires! So Good It Feels Like Cheating

Рет қаралды 13,318

Күн бұрын

In this video I run and review the new 72mm pin tires from DJ Crawler! These maintain a 1.0 wheel and push the limits in terms of size and performance. A new dual stage foam helps maintain tire rigidity while still allowing for good conformity to obstacles. The result is a massive, aggressive, and functional tire!
72mm pins: amzn.to/48wVqzR
74mm MTs: amzn.to/3TGCDy6
Cape Crawlers Merch: capecrawlers-s...
Affiliate links:
Tower Hobbies:
Horizon Hobbies:alnk.to/aLFxP5n
Amain Hobbies:
FairRC: shrsl.com/3w3co
Discount codes
5% off RCAWD: rcawd.com/?ref... - discount code CapeCrawlers
$10 off any order $100 of accessories: www.fmshobby.c... - discount code Capecrawlers
5% off any Injora products: www.injora.com - code Capecrawlers05
10% off any Little Guy Racing Parts products:
littleguyracin... - code CAPE10
10% off any Flubberstufferz products: flubberstuffer... - code Flub10CC
10% off any Cow RC products: cowrc.com/ - code CAPECRAWLERS
Email me with suggestions or collaboration inquiries: capecrawlersRC@gmail.com
Follow us on Instagram @capecrawlers!
Timestamps
In depth look at the tires: 0:44
Size comparisons: 3:41
Rock crawling: 5:52
Indoor course runs: 14:41
Final thoughts: 17:42

Пікірлер: 72

@pinkbluebronco4323 8 ай бұрын

I think those dj crawler tires would be good for those hard park builds with 1.8in wheels because I bet you could get away with still having a good sidewall

@patrickgeorge4306 8 ай бұрын

I got a set of these tires based on your review. I was planning on going with the 70mm 1.3 injora's until I saw this. Just got them installed on my Tarantula build and holy cow you weren't kidding, these are unbelievable! I have them mounted on a set of treal beadlocks with the interchangeable hubs, running the ones with more negative offset. Combined with a set of +6 mm weighted hex extensions, it's just enough to fit. There's a tiny bit of rub on the bottom cage bar right behind the front wheels, but not enough to bind up. These tires took the tarantula to the next level. it's almost annoying how good it is haha, im going to have to rebuild some of my backyard course to make it challenging enough! thanks for the solid product recommendation!

@CapeCrawlers 8 ай бұрын

Glad you enjoy them as much as I do! Amazing tires

@blazinghillie 7 ай бұрын

Same here! Mounted mine up yesterday and they blew my mind on traction.

@CapeCrawlers 8 ай бұрын

Timestamps In depth look at the tires: 0:44 Size comparisons: 3:41 Rock crawling: 5:52 Indoor course runs: 14:41 Final thoughts: 17:42

@Ronin8451 8 ай бұрын

I want the big mud tires ! I am designing a scale version of Matt's Off road Recovery's big International tow truck using a modified Power Wagon body and a styrene tow bed and winches on the back. Keep showing us new things for these micro crawlers !

@vdel9036 8 ай бұрын

I'm finishing my new home made 1/18 shafty. No body, roll-cage style, so these giant new tires won't hit anything once in place. Thank you for this video, you improved my build.👍😉

@burtashbrook1159 8 ай бұрын

Look like some very capable tires that would go perfect on a set of 1.8s for my 1/18 MOA project. Can't wait to get a set

@same1eka 21 күн бұрын

They match perfectly on my AX24 after making it longer and wider. Now it looks and performs great

@rcrockcrawler 8 ай бұрын

Very impressive! 💥👍 I like the dual stage foams. Look like great tires as they are, but as always, I'll be doing tire mods.. 😃😎

@matthewcopeland4441 8 ай бұрын

Very impressed with the tires and the rig! Especially impressive that it is still running the stock ECM and has the control and speed that it does,

@ericpohlman5131 8 ай бұрын

That rig is quite capable you could probably put paddle tires on it and it'd do just fine.I hope all is well there and the new job is working out, Happy new year.

@jimbo4203 8 ай бұрын

Mad Max tires ! Dj crawlers are nice , I like my 60 mm ones ,the Tarantulas impressive 😊

@AdrianLopez-rm8ks 8 ай бұрын

I can’t wait for 100 milimeters😂

@rcjoe406 8 ай бұрын

I thought it would be goofy but after running 68mm for awhile now it just seems normal i luv em need the injora 70mm with the 1.3 wheels first awesome video

@kennethrobinson9008 8 ай бұрын

Wow! Those DJ Pin looks awesome!

@Thebuffingwizard 8 ай бұрын

I’m sold, I will be ordering a set to go along with my Injora fj40 body.

@keitht7546 8 ай бұрын

Wow they really grip. Great job

@AV-RC 8 ай бұрын

Ohhh yeah!! Had the bug injora super swampers on my tarantula but these are perfect! Order with the link before the video even ended. Gonna go kill the local mini corse now

@MitchellBolognaniRC 8 ай бұрын

I have a couple of builds I'd like these for. Waited for your review.

@RCCrawlerz209 8 ай бұрын

Dude! I'm starting a trx4m buggy build, the bettle aka "rhino"! Can't wait to get it done! Not sure about the screw holes though for the top of the shock mounting spots as they look too small. 🤔🤨

@nunocarneiro464 8 ай бұрын

Great rig good pairing

@The_RC_Guru 8 ай бұрын

They’re just so tall on these tiny drivelines. Small running gears, shafts, and motors you start breaking stuff easier. I’ve kept my micros, well, micro. When I want that much bigger I have 1/18, 1/10, 1/8, 1/6, and 1/5 trucks. Remember too when the tire size goes up that much it effectively gears your vehicle up and you lose some fine control. These would be pretty cool on a small 1/18 buggy w open diffs and hard foams on a track.

@CapeCrawlers 8 ай бұрын

Very good points. I’ve done full metal driveline on this one but it’s still a lot of stress on those parts

@reprieverc 8 ай бұрын

Im thinking about getting some of these for my Drivetime RC divino. Might have to narrow them some 🤔

@Rcguru909 8 ай бұрын

Could you consider doing a rock pirates rc interceptor for your Phoenix?

@CapeCrawlers 8 ай бұрын

Yes I would be interested in that for sure

@ianhoffman2880 8 ай бұрын

How do you film and drive at the same time? Awesome vid btw

@270Sammy 8 ай бұрын

Great video! Just asking but can you do a short of the high trail chevys again?

@Robert-fr7ud 5 ай бұрын

I'm still just waiting to see them on an scx24 project because they'll fit but they look like they might be too big I'd really like to see a function there but doesn't seem like anybody's posting anything yet

@Bonitacreekrc2 8 ай бұрын

awesome tires! are you going to put the new injora esc in the tarantula? Always exited to see your latest video!

@CapeCrawlers 8 ай бұрын

I’ve got the new esc in my creamsicle bronco. I’ll do a video soon!

@chrisduncan4982 7 ай бұрын

Where did you get that "crawler park" thing?I like the video

@CapeCrawlers 7 ай бұрын

I got mine from Amazon. But you can order it from toyswd.com

@Mr.redneck 8 ай бұрын

Hi thanks for replying before hope im not to late n your still looking at comments. How did you get the remote to stop flashing when u did the k5 brushless I bought it n it jitters the remote keeps flashing not happy with furitek

@user-xn2od3gb6n 8 ай бұрын

I know this is probally off topic but are the normal trx4m and the trx4m high trail the same chassis?

@crystalwolfmoon2863 7 ай бұрын

from/to australia thru aliexpress they [74mm] were only $27 au as opposed to $58 au from amazon

@ParczalaW 7 ай бұрын

How about dirt? is this that much grip as on the rocks?

@lesabre1972 8 ай бұрын

I have a set of mud DJ Crawlers on my fcx18 an my k10 they work awesome

@mzondi1970 8 ай бұрын

I am just getting into the hobby bought a C10 and a unimog I want to build one of these type of crawlers you're showing how complicated are they to build for a noob

@CapeCrawlers 8 ай бұрын

They’re not that complicated. It looks worse than it is. I’ve got some instructional videos on chassis kits like this

@mzondi1970 8 ай бұрын

@@CapeCrawlers I've been watching and catching up on a lot of your old videos

@toddevertsen4997 8 ай бұрын

@capeCrawlers what shocks are you running on your buggy? Thanks, and awesome video!

@CapeCrawlers 8 ай бұрын

Thanks for watching! They are the Injora 59mm

@mmgando 2 ай бұрын

Could you fit them on a scx24?

@thundertoad3 8 ай бұрын

wow i wonder how they would do on your slayer ? Would give some more clearance for certain

@CapeCrawlers 8 ай бұрын

I would need to widen it out a bit more I think, but they would be gnarly on the slayer. I’m probably going to order a couple more sets to try on other projects!

@Connor-Meyer 8 ай бұрын

I saw on amazon and ebay that there are 1/18 scale winches and was wondering if you or anybody has seen them and bought them, and was wonderimg what you think about em

@CapeCrawlers 8 ай бұрын

I personally have not but I would love to try one!

@tafrog5552 8 ай бұрын

Hi please help if you can , i have just bought the lizard pro with mini komodo i have tried looking and asking different people what i have managed to see i have confusion do i need a seperat esc to plug the lizard into or is it stand alone i am building from scratch not upgrading many thanks

@CapeCrawlers 8 ай бұрын

The lizard is the esc, but you will need a new receiver to plug it into depending on what truck you have.

@tafrog5552 8 ай бұрын

@@CapeCrawlers that brilliant thank you so much .

@llsoonerll 2 ай бұрын

Are you driving this thing one handed ?

@bdog7262 7 ай бұрын

Would u consider these to be your best 1.0 crawler tires???

@CapeCrawlers 7 ай бұрын

For pure performance yes

@bdog7262 7 ай бұрын

@@CapeCrawlers thank you for your response. I have a set coming for me now. Thanks

@SilverbacksLC 7 ай бұрын

What size links are you running on that build?

@CapeCrawlers 7 ай бұрын

Stock length Injora brass links

@SilverbacksLC 7 ай бұрын

@@CapeCrawlers wow that was a quick response. Thank you so much! I love the content you’re putting out keep up the good work.

8 ай бұрын

Would this work on a scx24?

@CapeCrawlers 8 ай бұрын

As long as you had the room to clear them yes

@bryanbenz9045 8 ай бұрын

Where is that course located?

@CapeCrawlers 8 ай бұрын

Yarmouth Massachusetts

@slamboy66 8 ай бұрын

If you could only have one rig?🤔🤔🤔

@Brayrfd1192 8 ай бұрын

Are you into competitive crawling with those little things

@CapeCrawlers 8 ай бұрын

I’ve competed a couple times, not in real serious events. I like to build them more than comp them

@brandonperry794 8 ай бұрын

That thing is not fair, your basically velcroed to the rocks

@CapeCrawlers 8 ай бұрын

😂 so true!

@PurebloodedPatriot 8 ай бұрын

UTB 24

@fishingwithxotic477 8 ай бұрын

Save some air for the rest of us

@gom4ngo745 8 ай бұрын

There is a reason the comp pins are banned in 1/10. Don't even get me started on the size, 1/24 gtfo lol.

@DearDiaryMe 6 ай бұрын

Slipping all over the place, that's all i saw.